summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/meson.dtsi75
-rw-r--r--arch/arm/boot/dts/meson6-atv1200.dts2
-rw-r--r--arch/arm/boot/dts/meson6.dtsi2
-rw-r--r--arch/arm/boot/dts/meson8.dtsi124
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi50
-rw-r--r--drivers/clk/meson/gxbb.h20
-rw-r--r--drivers/clk/meson/meson8b.h20
-rw-r--r--include/dt-bindings/clock/gxbb-clkc.h10
-rw-r--r--include/dt-bindings/clock/meson8b-clkc.h10
9 files changed, 271 insertions, 42 deletions
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 8d9c36970dfd..15204e44161d 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -45,6 +45,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/include/ "skeleton.dtsi"
/ {
@@ -78,45 +80,72 @@
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
+ hwrng: rng@8100 {
+ compatible = "amlogic,meson-rng";
+ reg = <0x8100 0x8>;
+ };
+
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x84c0 0x18>;
- interrupts = <0 26 1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x84dc 0x18>;
- interrupts = <0 75 1>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson6-i2c";
reg = <0x8500 0x20>;
- interrupts = <0 21 1>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ saradc: adc@8680 {
+ compatible = "amlogic,meson-saradc";
+ reg = <0x8680 0x34>;
+ #io-channel-cells = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x8700 0x18>;
- interrupts = <0 93 1>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson6-i2c";
reg = <0x87c0 0x20>;
- interrupts = <0 128 1>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ usb0_phy: phy@8800 {
+ compatible = "amlogic,meson-mx-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x8800 0x20>;
+ status = "disabled";
+ };
+
+ usb1_phy: phy@8820 {
+ compatible = "amlogic,meson-mx-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x8820 0x20>;
+ status = "disabled";
+ };
+
spifc: spi@8c80 {
compatible = "amlogic,meson6-spifc";
reg = <0x8c80 0x80>;
@@ -128,13 +157,13 @@
wdt: watchdog@9900 {
compatible = "amlogic,meson6-wdt";
reg = <0x9900 0x8>;
- interrupts = <0 0 1>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@9940 {
compatible = "amlogic,meson6-timer";
reg = <0x9940 0x18>;
- interrupts = <0 10 1>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
};
};
@@ -148,32 +177,56 @@
ir_receiver: ir-receiver@480 {
compatible= "amlogic,meson6-ir";
reg = <0x480 0x20>;
- interrupts = <0 15 1>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x4c0 0x18>;
- interrupts = <0 90 1>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson6-i2c";
reg = <0x500 0x20>;
- interrupts = <0 92 1>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
+ usb0: usb@c9040000 {
+ compatible = "snps,dwc2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc9040000 0x40000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
+ phys = <&usb0_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usb1: usb@c90c0000 {
+ compatible = "snps,dwc2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xc90c0000 0x40000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+ phys = <&usb1_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "host";
+ status = "disabled";
+ };
+
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
reg = <0xc9410000 0x10000
0xc1108108 0x4>;
- interrupts = <0 8 1>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "macirq";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
index 1237faa63ce6..9444b0d9628f 100644
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -46,7 +46,7 @@
*/
/dts-v1/;
-/include/ "meson6.dtsi"
+#include "meson6.dtsi"
/ {
model = "Geniatech ATV1200";
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index b0fc91ffd6a1..8557b6117a4b 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -45,7 +45,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-/include/ "meson.dtsi"
+#include "meson.dtsi"
/ {
model = "Amlogic Meson6 SoC";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 9b0b3ddbb17e..cada35828931 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -45,7 +45,7 @@
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8-gpio.h>
-/include/ "meson.dtsi"
+#include "meson.dtsi"
/ {
model = "Amlogic Meson8 SoC";
@@ -83,6 +83,38 @@
reg = <0x203>;
};
};
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* 2 MiB reserved for Hardware ROM Firmware? */
+ hwrom@0 {
+ reg = <0x0 0x200000>;
+ no-map;
+ };
+
+ /*
+ * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+ * code which is responsible for system suspend. It loads a
+ * piece of ARC code ("arc_power" in the vendor u-boot tree)
+ * into SRAM, executes that and shuts down the (last) ARM core.
+ * The arc_power firmware then checks various wakeup sources
+ * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+ * simply the power key) and re-starts the ARM core once it
+ * detects a wakeup request.
+ */
+ power-firmware@4f00000 {
+ reg = <0x4f00000 0x100000>;
+ no-map;
+ };
+ };
+
+ scu@c4300000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xc4300000 0x100>;
+ };
}; /* end of / */
&aobus {
@@ -116,6 +148,20 @@
function = "i2c_mst_ao";
};
};
+
+ ir_recv_pins: remote {
+ mux {
+ groups = "remote_input";
+ function = "remote";
+ };
+ };
+
+ pwm_f_ao_pins: pwm-f-ao {
+ mux {
+ groups = "pwm_f_ao";
+ function = "pwm_f_ao";
+ };
+ };
};
};
@@ -144,17 +190,34 @@
gpio-ranges = <&pinctrl_cbus 0 0 120>;
};
- spi_nor_pins: nor {
+ sd_a_pins: sd-a {
mux {
- groups = "nor_d", "nor_q", "nor_c", "nor_cs";
- function = "nor";
+ groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+ "sd_d3_a", "sd_clk_a", "sd_cmd_a";
+ function = "sd_a";
};
};
- ir_recv_pins: remote {
+ sd_b_pins: sd-b {
mux {
- groups = "remote_input";
- function = "remote";
+ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+ "sd_d3_b", "sd_clk_b", "sd_cmd_b";
+ function = "sd_b";
+ };
+ };
+
+ sd_c_pins: sd-c {
+ mux {
+ groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+ "sd_d3_c", "sd_clk_c", "sd_cmd_c";
+ function = "sd_c";
+ };
+ };
+
+ spi_nor_pins: nor {
+ mux {
+ groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+ function = "nor";
};
};
@@ -168,14 +231,27 @@
function = "ethernet";
};
};
+
+ pwm_e_pins: pwm-e {
+ mux {
+ groups = "pwm_e";
+ function = "pwm_e";
+ };
+ };
};
};
&ethmac {
- clocks = <&clkc CLKID_CLK81>;
+ clocks = <&clkc CLKID_ETH>;
clock-names = "stmmaceth";
};
+&hwrng {
+ compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
&i2c_AO {
clocks = <&clkc CLKID_CLK81>;
};
@@ -194,6 +270,14 @@
arm,filter-ranges = <0x100000 0xc0000000>;
};
+&saradc {
+ compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+ clocks = <&clkc CLKID_XTAL>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>;
+ clock-names = "clkin", "core", "sana";
+};
+
&spifc {
clocks = <&clkc CLKID_CLK81>;
};
@@ -213,3 +297,27 @@
&uart_C {
clocks = <&clkc CLKID_CLK81>;
};
+
+&usb0 {
+ compatible = "amlogic,meson8-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb1 {
+ compatible = "amlogic,meson8-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb0_phy {
+ compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+ clock-names = "usb_general", "usb";
+};
+
+&usb1_phy {
+ compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+ clock-names = "usb_general", "usb";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index d9f116a418b2..72e4f425f190 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -82,6 +82,11 @@
reg = <0x203>;
};
};
+
+ scu@c4300000 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0xc4300000 0x100>;
+ };
}; /* end of / */
&aobus {
@@ -171,12 +176,31 @@
};
};
+&ethmac {
+ clocks = <&clkc CLKID_ETH>;
+ clock-names = "stmmaceth";
+};
+
+&hwrng {
+ compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
+
&L2 {
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
arm,filter-ranges = <0x100000 0xc0000000>;
};
+&saradc {
+ compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+ clocks = <&clkc CLKID_XTAL>,
+ <&clkc CLKID_SAR_ADC>,
+ <&clkc CLKID_SANA>;
+ clock-names = "clkin", "core", "sana";
+};
+
&uart_AO {
clocks = <&clkc CLKID_CLK81>;
};
@@ -192,3 +216,29 @@
&uart_C {
clocks = <&clkc CLKID_CLK81>;
};
+
+&usb0 {
+ compatible = "amlogic,meson8b-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb1 {
+ compatible = "amlogic,meson8b-usb", "snps,dwc2";
+ clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+ clock-names = "otg";
+};
+
+&usb0_phy {
+ compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+ clock-names = "usb_general", "usb";
+ resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+ compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+ clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+ clock-names = "usb_general", "usb";
+ resets = <&reset RESET_USB_OTG>;
+};
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index 93b8f07ee7af..4d04f4a3cd59 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -171,7 +171,7 @@
* to be exposed to client nodes in DT: include/dt-bindings/clock/gxbb-clkc.h
*/
#define CLKID_SYS_PLL 0
-/* CLKID_CPUCLK */
+#define CLKID_CPUCLK 1
/* CLKID_HDMI_PLL */
#define CLKID_FIXED_PLL 3
/* CLKID_FCLK_DIV2 */
@@ -191,12 +191,12 @@
#define CLKID_ISA 18
#define CLKID_PL301 19
#define CLKID_PERIPHS 20
-#define CLKID_SPICC 21
+/* CLKID_SPICC */
/* CLKID_I2C */
/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
/* CLKID_RNG0 */
-#define CLKID_UART0 26
+/* CLKID_UART0 */
#define CLKID_SDHC 27
#define CLKID_STREAM 28
#define CLKID_ASYNC_FIFO 29
@@ -209,7 +209,7 @@
/* CLKID_ETH */
#define CLKID_DEMUX 37
/* CLKID_AIU_GLUE */
-#define CLKID_IEC958 39
+/* CLKID_IEC958 */
/* CLKID_I2S_OUT */
#define CLKID_AMCLK 41
#define CLKID_AIFIFO2 42
@@ -218,7 +218,7 @@
#define CLKID_ADC 45
#define CLKID_BLKMV 46
/* CLKID_AIU */
-#define CLKID_UART1 48
+/* CLKID_UART1 */
#define CLKID_G2D 49
/* CLKID_USB0 */
/* CLKID_USB1 */
@@ -238,7 +238,7 @@
/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
-#define CLKID_UART2 68
+/* CLKID_UART2 */
/* #define CLKID_SANA */
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
@@ -251,7 +251,7 @@
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
/* CLKID_AOCLK_GATE */
-#define CLKID_IEC958_GATE 81
+/* CLKID_IEC958_GATE */
#define CLKID_ENC480P 82
#define CLKID_RNG1 83
#define CLKID_GCLK_VENCI_INT1 84
@@ -277,13 +277,13 @@
#define CLKID_MALI_1_DIV 104
/* CLKID_MALI_1 */
/* CLKID_MALI */
-#define CLKID_CTS_AMCLK 107
+/* CLKID_CTS_AMCLK */
#define CLKID_CTS_AMCLK_SEL 108
#define CLKID_CTS_AMCLK_DIV 109
-#define CLKID_CTS_MCLK_I958 110
+/* CLKID_CTS_MCLK_I958 */
#define CLKID_CTS_MCLK_I958_SEL 111
#define CLKID_CTS_MCLK_I958_DIV 112
-#define CLKID_CTS_I958 113
+/* CLKID_CTS_I958 */
#define NR_CLKS 114
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index 3881defc8644..a687e02547dc 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -87,20 +87,20 @@
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
#define CLKID_I2C 22
-#define CLKID_SAR_ADC 23
+/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
-#define CLKID_RNG0 25
+/* #define CLKID_RNG0 */
#define CLKID_UART0 26
#define CLKID_SDHC 27
#define CLKID_STREAM 28
#define CLKID_ASYNC_FIFO 29
-#define CLKID_SDIO 30
+/* #define CLKID_SDIO */
#define CLKID_ABUF 31
#define CLKID_HIU_IFACE 32
#define CLKID_ASSIST_MISC 33
#define CLKID_SPI 34
#define CLKID_I2S_SPDIF 35
-#define CLKID_ETH 36
+/* #define CLKID_ETH */
#define CLKID_DEMUX 37
#define CLKID_AIU_GLUE 38
#define CLKID_IEC958 39
@@ -114,12 +114,12 @@
#define CLKID_AIU 47
#define CLKID_UART1 48
#define CLKID_G2D 49
-#define CLKID_USB0 50
-#define CLKID_USB1 51
+/* #define CLKID_USB0 */
+/* #define CLKID_USB1 */
#define CLKID_RESET 52
#define CLKID_NAND 53
#define CLKID_DOS_PARSER 54
-#define CLKID_USB 55
+/* #define CLKID_USB */
#define CLKID_VDIN1 56
#define CLKID_AHB_ARB0 57
#define CLKID_EFUSE 58
@@ -128,12 +128,12 @@
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
#define CLKID_HDMI_PCLK 63
-#define CLKID_USB1_DDR_BRIDGE 64
-#define CLKID_USB0_DDR_BRIDGE 65
+/* CLKID_USB1_DDR_BRIDGE */
+/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
-#define CLKID_SANA 69
+/* #define CLKID_SANA */
#define CLKID_VPU_INTR 70
#define CLKID_SEC_AHB_AHB3_BRIDGE 71
#define CLKID_CLK81_A9 72
diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
index 3190e30b9398..e3e9f7919c31 100644
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -5,7 +5,6 @@
#ifndef __GXBB_CLKC_H
#define __GXBB_CLKC_H
-#define CLKID_CPUCLK 1
#define CLKID_HDMI_PLL 2
#define CLKID_FCLK_DIV2 4
#define CLKID_FCLK_DIV3 5
@@ -13,24 +12,30 @@
#define CLKID_GP0_PLL 9
#define CLKID_CLK81 12
#define CLKID_MPLL2 15
+#define CLKID_SPICC 21
#define CLKID_I2C 22
#define CLKID_SAR_ADC 23
#define CLKID_RNG0 25
+#define CLKID_UART0 26
#define CLKID_SPI 34
#define CLKID_ETH 36
#define CLKID_AIU_GLUE 38
+#define CLKID_IEC958 39
#define CLKID_I2S_OUT 40
#define CLKID_MIXER_IFACE 44
#define CLKID_AIU 47
+#define CLKID_UART1 48
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
+#define CLKID_UART2 68
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
#define CLKID_AOCLK_GATE 80
+#define CLKID_IEC958_GATE 81
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
@@ -42,5 +47,8 @@
#define CLKID_MALI_1_SEL 103
#define CLKID_MALI_1 105
#define CLKID_MALI 106
+#define CLKID_CTS_AMCLK 107
+#define CLKID_CTS_MCLK_I958 110
+#define CLKID_CTS_I958 113
#endif /* __GXBB_CLKC_H */
diff --git a/include/dt-bindings/clock/meson8b-clkc.h b/include/dt-bindings/clock/meson8b-clkc.h
index a55ff8c9b30f..e29227fb52a1 100644
--- a/include/dt-bindings/clock/meson8b-clkc.h
+++ b/include/dt-bindings/clock/meson8b-clkc.h
@@ -21,5 +21,15 @@
#define CLKID_ZERO 13
#define CLKID_MPEG_SEL 14
#define CLKID_MPEG_DIV 15
+#define CLKID_SAR_ADC 23
+#define CLKID_RNG0 25
+#define CLKID_SDIO 30
+#define CLKID_ETH 36
+#define CLKID_USB0 50
+#define CLKID_USB1 51
+#define CLKID_USB 55
+#define CLKID_USB1_DDR_BRIDGE 64
+#define CLKID_USB0_DDR_BRIDGE 65
+#define CLKID_SANA 69
#endif /* __MESON8B_CLKC_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 01:41:05 +0000