summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/ethernet/intel/igb/igb.h1
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c313
2 files changed, 242 insertions, 72 deletions
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index d135261f8602..707ae5c297ea 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -481,6 +481,7 @@ struct igb_adapter {
#define IGB_FLAG_MAS_ENABLE (1 << 12)
#define IGB_FLAG_HAS_MSIX (1 << 13)
#define IGB_FLAG_EEE (1 << 14)
+#define IGB_FLAG_VLAN_PROMISC BIT(15)
/* Media Auto Sense */
#define IGB_MAS_ENABLE_0 0X0001
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 6876ae5e18a9..7366d4ff0400 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -1819,6 +1819,10 @@ void igb_down(struct igb_adapter *adapter)
if (!pci_channel_offline(adapter->pdev))
igb_reset(adapter);
+
+ /* clear VLAN promisc flag so VFTA will be updated if necessary */
+ adapter->flags &= ~IGB_FLAG_VLAN_PROMISC;
+
igb_clean_all_tx_rings(adapter);
igb_clean_all_rx_rings(adapter);
#ifdef CONFIG_IGB_DCA
@@ -2050,7 +2054,7 @@ static int igb_set_features(struct net_device *netdev,
if (changed & NETIF_F_HW_VLAN_CTAG_RX)
igb_vlan_mode(netdev, features);
- if (!(changed & NETIF_F_RXALL))
+ if (!(changed & (NETIF_F_RXALL | NETIF_F_NTUPLE)))
return 0;
netdev->features = features;
@@ -3515,8 +3519,7 @@ void igb_setup_rctl(struct igb_adapter *adapter)
E1000_RCTL_BAM | /* RX All Bcast Pkts */
E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
- rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
- E1000_RCTL_DPF | /* Allow filtered pause */
+ rctl &= ~(E1000_RCTL_DPF | /* Allow filtered pause */
E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
/* Do not mess with E1000_CTRL_VME, it affects transmit as well,
* and that breaks VLANs.
@@ -3967,6 +3970,130 @@ static int igb_write_uc_addr_list(struct net_device *netdev)
return count;
}
+static int igb_vlan_promisc_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 i, pf_id;
+
+ switch (hw->mac.type) {
+ case e1000_i210:
+ case e1000_i211:
+ case e1000_i350:
+ /* VLAN filtering needed for VLAN prio filter */
+ if (adapter->netdev->features & NETIF_F_NTUPLE)
+ break;
+ /* fall through */
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i354:
+ /* VLAN filtering needed for pool filtering */
+ if (adapter->vfs_allocated_count)
+ break;
+ /* fall through */
+ default:
+ return 1;
+ }
+
+ /* We are already in VLAN promisc, nothing to do */
+ if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
+ return 0;
+
+ if (!adapter->vfs_allocated_count)
+ goto set_vfta;
+
+ /* Add PF to all active pools */
+ pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
+
+ for (i = E1000_VLVF_ARRAY_SIZE; --i;) {
+ u32 vlvf = rd32(E1000_VLVF(i));
+
+ vlvf |= 1 << pf_id;
+ wr32(E1000_VLVF(i), vlvf);
+ }
+
+set_vfta:
+ /* Set all bits in the VLAN filter table array */
+ for (i = E1000_VLAN_FILTER_TBL_SIZE; i--;)
+ hw->mac.ops.write_vfta(hw, i, ~0U);
+
+ /* Set flag so we don't redo unnecessary work */
+ adapter->flags |= IGB_FLAG_VLAN_PROMISC;
+
+ return 0;
+}
+
+#define VFTA_BLOCK_SIZE 8
+static void igb_scrub_vfta(struct igb_adapter *adapter, u32 vfta_offset)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta[VFTA_BLOCK_SIZE] = { 0 };
+ u32 vid_start = vfta_offset * 32;
+ u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32);
+ u32 i, vid, word, bits, pf_id;
+
+ /* guarantee that we don't scrub out management VLAN */
+ vid = adapter->mng_vlan_id;
+ if (vid >= vid_start && vid < vid_end)
+ vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
+
+ if (!adapter->vfs_allocated_count)
+ goto set_vfta;
+
+ pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
+
+ for (i = E1000_VLVF_ARRAY_SIZE; --i;) {
+ u32 vlvf = rd32(E1000_VLVF(i));
+
+ /* pull VLAN ID from VLVF */
+ vid = vlvf & VLAN_VID_MASK;
+
+ /* only concern ourselves with a certain range */
+ if (vid < vid_start || vid >= vid_end)
+ continue;
+
+ if (vlvf & E1000_VLVF_VLANID_ENABLE) {
+ /* record VLAN ID in VFTA */
+ vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
+
+ /* if PF is part of this then continue */
+ if (test_bit(vid, adapter->active_vlans))
+ continue;
+ }
+
+ /* remove PF from the pool */
+ bits = ~(1 << pf_id);
+ bits &= rd32(E1000_VLVF(i));
+ wr32(E1000_VLVF(i), bits);
+ }
+
+set_vfta:
+ /* extract values from active_vlans and write back to VFTA */
+ for (i = VFTA_BLOCK_SIZE; i--;) {
+ vid = (vfta_offset + i) * 32;
+ word = vid / BITS_PER_LONG;
+ bits = vid % BITS_PER_LONG;
+
+ vfta[i] |= adapter->active_vlans[word] >> bits;
+
+ hw->mac.ops.write_vfta(hw, vfta_offset + i, vfta[i]);
+ }
+}
+
+static void igb_vlan_promisc_disable(struct igb_adapter *adapter)
+{
+ u32 i;
+
+ /* We are not in VLAN promisc, nothing to do */
+ if (!(adapter->flags & IGB_FLAG_VLAN_PROMISC))
+ return;
+
+ /* Set flag so we don't redo unnecessary work */
+ adapter->flags &= ~IGB_FLAG_VLAN_PROMISC;
+
+ for (i = 0; i < E1000_VLAN_FILTER_TBL_SIZE; i += VFTA_BLOCK_SIZE)
+ igb_scrub_vfta(adapter, i);
+}
+
/**
* igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
@@ -3981,21 +4108,13 @@ static void igb_set_rx_mode(struct net_device *netdev)
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
unsigned int vfn = adapter->vfs_allocated_count;
- u32 rctl, vmolr = 0;
+ u32 rctl = 0, vmolr = 0;
int count;
/* Check for Promiscuous and All Multicast modes */
- rctl = rd32(E1000_RCTL);
-
- /* clear the effected bits */
- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
-
if (netdev->flags & IFF_PROMISC) {
- /* retain VLAN HW filtering if in VT mode */
- if (adapter->vfs_allocated_count)
- rctl |= E1000_RCTL_VFE;
- rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+ rctl |= E1000_RCTL_UPE | E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_ROPE | E1000_VMOLR_MPME;
} else {
if (netdev->flags & IFF_ALLMULTI) {
rctl |= E1000_RCTL_MPE;
@@ -4022,8 +4141,24 @@ static void igb_set_rx_mode(struct net_device *netdev)
rctl |= E1000_RCTL_UPE;
vmolr |= E1000_VMOLR_ROPE;
}
- rctl |= E1000_RCTL_VFE;
}
+
+ /* enable VLAN filtering by default */
+ rctl |= E1000_RCTL_VFE;
+
+ /* disable VLAN filtering for modes that require it */
+ if ((netdev->flags & IFF_PROMISC) ||
+ (netdev->features & NETIF_F_RXALL)) {
+ /* if we fail to set all rules then just clear VFE */
+ if (igb_vlan_promisc_enable(adapter))
+ rctl &= ~E1000_RCTL_VFE;
+ } else {
+ igb_vlan_promisc_disable(adapter);
+ }
+
+ /* update state of unicast, multicast, and VLAN filtering modes */
+ rctl |= rd32(E1000_RCTL) & ~(E1000_RCTL_UPE | E1000_RCTL_MPE |
+ E1000_RCTL_VFE);
wr32(E1000_RCTL, rctl);
/* In order to support SR-IOV and eventually VMDq it is necessary to set
@@ -5762,48 +5897,98 @@ static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
{
struct e1000_hw *hw = &adapter->hw;
- u32 pool_mask, reg, vid;
- int i;
+ u32 pool_mask, vlvf_mask, i;
+
+ /* create mask for VF and other pools */
+ pool_mask = E1000_VLVF_POOLSEL_MASK;
+ vlvf_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
- pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+ /* drop PF from pool bits */
+ pool_mask &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT +
+ adapter->vfs_allocated_count));
/* Find the vlan filter for this id */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
+ for (i = E1000_VLVF_ARRAY_SIZE; i--;) {
+ u32 vlvf = rd32(E1000_VLVF(i));
+ u32 vfta_mask, vid, vfta;
/* remove the vf from the pool */
- reg &= ~pool_mask;
-
- /* if pool is empty then remove entry from vfta */
- if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
- (reg & E1000_VLVF_VLANID_ENABLE)) {
- reg = 0;
- vid = reg & E1000_VLVF_VLANID_MASK;
- igb_vfta_set(hw, vid, vf, false, true);
- }
+ if (!(vlvf & vlvf_mask))
+ continue;
+
+ /* clear out bit from VLVF */
+ vlvf ^= vlvf_mask;
+
+ /* if other pools are present, just remove ourselves */
+ if (vlvf & pool_mask)
+ goto update_vlvfb;
+
+ /* if PF is present, leave VFTA */
+ if (vlvf & E1000_VLVF_POOLSEL_MASK)
+ goto update_vlvf;
+
+ vid = vlvf & E1000_VLVF_VLANID_MASK;
+ vfta_mask = 1 << (vid % 32);
- wr32(E1000_VLVF(i), reg);
+ /* clear bit from VFTA */
+ vfta = adapter->shadow_vfta[vid / 32];
+ if (vfta & vfta_mask)
+ hw->mac.ops.write_vfta(hw, vid / 32, vfta ^ vfta_mask);
+update_vlvf:
+ /* clear pool selection enable */
+ if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
+ vlvf &= E1000_VLVF_POOLSEL_MASK;
+ else
+ vlvf = 0;
+update_vlvfb:
+ /* clear pool bits */
+ wr32(E1000_VLVF(i), vlvf);
}
}
-static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid)
+static int igb_find_vlvf_entry(struct e1000_hw *hw, u32 vlan)
{
- struct e1000_hw *hw = &adapter->hw;
- int i;
- u32 reg;
+ u32 vlvf;
+ int idx;
- /* Find the vlan filter for this id */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
- if ((reg & E1000_VLVF_VLANID_ENABLE) &&
- vid == (reg & E1000_VLVF_VLANID_MASK))
+ /* short cut the special case */
+ if (vlan == 0)
+ return 0;
+
+ /* Search for the VLAN id in the VLVF entries */
+ for (idx = E1000_VLVF_ARRAY_SIZE; --idx;) {
+ vlvf = rd32(E1000_VLVF(idx));
+ if ((vlvf & VLAN_VID_MASK) == vlan)
break;
}
- if (i >= E1000_VLVF_ARRAY_SIZE)
- i = -1;
+ return idx;
+}
+
+void igb_update_pf_vlvf(struct igb_adapter *adapter, u32 vid)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 bits, pf_id;
+ int idx;
+
+ idx = igb_find_vlvf_entry(hw, vid);
+ if (!idx)
+ return;
- return i;
+ /* See if any other pools are set for this VLAN filter
+ * entry other than the PF.
+ */
+ pf_id = adapter->vfs_allocated_count + E1000_VLVF_POOLSEL_SHIFT;
+ bits = ~(1 << pf_id) & E1000_VLVF_POOLSEL_MASK;
+ bits &= rd32(E1000_VLVF(idx));
+
+ /* Disable the filter so this falls into the default pool. */
+ if (!bits) {
+ if (adapter->flags & IGB_FLAG_VLAN_PROMISC)
+ wr32(E1000_VLVF(idx), 1 << pf_id);
+ else
+ wr32(E1000_VLVF(idx), 0);
+ }
}
static s32 igb_set_vf_vlan(struct igb_adapter *adapter, u32 vid,
@@ -5818,7 +6003,7 @@ static s32 igb_set_vf_vlan(struct igb_adapter *adapter, u32 vid,
* redundant but it guarantees PF will maintain visibility to
* the VLAN.
*/
- if (add && (adapter->netdev->flags & IFF_PROMISC)) {
+ if (add && test_bit(vid, adapter->active_vlans)) {
err = igb_vfta_set(hw, vid, pf_id, true, false);
if (err)
return err;
@@ -5826,36 +6011,17 @@ static s32 igb_set_vf_vlan(struct igb_adapter *adapter, u32 vid,
err = igb_vfta_set(hw, vid, vf, add, false);
- if (err)
- goto out;
+ if (add && !err)
+ return err;
- /* Go through all the checks to see if the VLAN filter should
- * be wiped completely.
+ /* If we failed to add the VF VLAN or we are removing the VF VLAN
+ * we may need to drop the PF pool bit in order to allow us to free
+ * up the VLVF resources.
*/
- if (!add && (adapter->netdev->flags & IFF_PROMISC)) {
- u32 vlvf, bits;
- int regndx = igb_find_vlvf_entry(adapter, vid);
-
- if (regndx < 0)
- goto out;
- /* See if any other pools are set for this VLAN filter
- * entry other than the PF.
- */
- vlvf = bits = rd32(E1000_VLVF(regndx));
- bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT +
- adapter->vfs_allocated_count);
- /* If the filter was removed then ensure PF pool bit
- * is cleared if the PF only added itself to the pool
- * because the PF is in promiscuous mode.
- */
- if ((vlvf & VLAN_VID_MASK) == vid &&
- !test_bit(vid, adapter->active_vlans) &&
- !bits)
- igb_vfta_set(hw, vid, adapter->vfs_allocated_count,
- false, false);
- }
+ if (test_bit(vid, adapter->active_vlans) ||
+ (adapter->flags & IGB_FLAG_VLAN_PROMISC))
+ igb_update_pf_vlvf(adapter, vid);
-out:
return err;
}
@@ -7124,7 +7290,9 @@ static int igb_vlan_rx_add_vid(struct net_device *netdev,
int pf_id = adapter->vfs_allocated_count;
/* add the filter since PF can receive vlans w/o entry in vlvf */
- igb_vfta_set(hw, vid, pf_id, true, true);
+ if (!vid || !(adapter->flags & IGB_FLAG_VLAN_PROMISC))
+ igb_vfta_set(hw, vid, pf_id, true, !!vid);
+
set_bit(vid, adapter->active_vlans);
return 0;
@@ -7138,7 +7306,8 @@ static int igb_vlan_rx_kill_vid(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
/* remove VID from filter table */
- igb_vfta_set(hw, vid, pf_id, false, true);
+ if (vid && !(adapter->flags & IGB_FLAG_VLAN_PROMISC))
+ igb_vfta_set(hw, vid, pf_id, false, true);
clear_bit(vid, adapter->active_vlans);