diff options
| -rw-r--r-- | Documentation/devicetree/bindings/usb/fcs,fusb302.txt | 29 | ||||
| -rw-r--r-- | drivers/staging/typec/fusb302/TODO | 4 | ||||
| -rw-r--r-- | drivers/staging/typec/fusb302/fusb302.c | 18 |
3 files changed, 50 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/usb/fcs,fusb302.txt b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt new file mode 100644 index 000000000000..472facfa5a71 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/fcs,fusb302.txt @@ -0,0 +1,29 @@ +Fairchild FUSB302 Type-C Port controllers + +Required properties : +- compatible : "fcs,fusb302" +- reg : I2C slave address +- interrupts : Interrupt specifier + +Optional properties : +- fcs,max-sink-microvolt : Maximum voltage to negotiate when configured as sink +- fcs,max-sink-microamp : Maximum current to negotiate when configured as sink +- fcs,max-sink-microwatt : Maximum power to negotiate when configured as sink + If this is less then max-sink-microvolt * + max-sink-microamp then the configured current will + be clamped. +- fcs,operating-sink-microwatt : + Minimum amount of power accepted from a sink + when negotiating + +Example: + +fusb302: typec-portc@54 { + compatible = "fcs,fusb302"; + reg = <0x54>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + fcs,max-sink-microvolt = <12000000>; + fcs,max-sink-microamp = <3000000>; + fcs,max-sink-microwatt = <36000000>; +}; diff --git a/drivers/staging/typec/fusb302/TODO b/drivers/staging/typec/fusb302/TODO index 4933a1d92c32..19b466eb585d 100644 --- a/drivers/staging/typec/fusb302/TODO +++ b/drivers/staging/typec/fusb302/TODO @@ -4,3 +4,7 @@ fusb302: - Find a non-hacky way to coordinate between PM and I2C access - Documentation? The FUSB302 datasheet provides information on the chip to help understand the code. But it may still be helpful to have a documentation. +- We may want to replace the "fcs,max-snk-microvolt", "fcs,max-snk-microamp", + "fcs,max-snk-microwatt" and "fcs,operating-snk-microwatt" device(tree) + properties with properties which are part of a generic type-c controller + devicetree binding. diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index 6baed06a3c0d..1c1751c994db 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -90,6 +90,7 @@ struct fusb302_chip { struct i2c_client *i2c_client; struct tcpm_port *tcpm_port; struct tcpc_dev tcpc_dev; + struct tcpc_config tcpc_config; struct regulator *vbus; @@ -1198,7 +1199,6 @@ static const struct tcpc_config fusb302_tcpc_config = { static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) { - fusb302_tcpc_dev->config = &fusb302_tcpc_config; fusb302_tcpc_dev->init = tcpm_init; fusb302_tcpc_dev->get_vbus = tcpm_get_vbus; fusb302_tcpc_dev->set_cc = tcpm_set_cc; @@ -1684,7 +1684,9 @@ static int fusb302_probe(struct i2c_client *client, { struct fusb302_chip *chip; struct i2c_adapter *adapter; + struct device *dev = &client->dev; int ret = 0; + u32 v; adapter = to_i2c_adapter(client->dev.parent); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { @@ -1699,8 +1701,22 @@ static int fusb302_probe(struct i2c_client *client, chip->i2c_client = client; i2c_set_clientdata(client, chip); chip->dev = &client->dev; + chip->tcpc_config = fusb302_tcpc_config; + chip->tcpc_dev.config = &chip->tcpc_config; mutex_init(&chip->lock); + if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v)) + chip->tcpc_config.max_snk_mv = v / 1000; + + if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v)) + chip->tcpc_config.max_snk_ma = v / 1000; + + if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v)) + chip->tcpc_config.max_snk_mw = v / 1000; + + if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) + chip->tcpc_config.operating_snk_mw = v / 1000; + ret = fusb302_debugfs_init(chip); if (ret < 0) return ret; |