diff options
| -rw-r--r-- | Documentation/devicetree/bindings/extcon/extcon-max3355.txt | 21 | ||||
| -rw-r--r-- | drivers/extcon/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-max3355.c | 146 |
4 files changed, 177 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-max3355.txt b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt new file mode 100644 index 000000000000..f2288ea9eb82 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-max3355.txt @@ -0,0 +1,21 @@ +Maxim Integrated MAX3355 USB OTG chip +------------------------------------- + +MAX3355 integrates a charge pump and comparators to enable a system with an +integrated USB OTG dual-role transceiver to function as a USB OTG dual-role +device. + +Required properties: +- compatible: should be "maxim,max3355"; +- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's SHDN# pin; +- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin + connected to the MAX3355's ID_OUT pin. + +Example: + + usb-otg { + compatible = "maxim,max3355"; + maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 0cebbf668886..3d89e60a3e71 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -52,6 +52,15 @@ config EXTCON_MAX14577 Maxim MAX14577/77836. The MAX14577/77836 MUIC is a USB port accessory detector and switch. +config EXTCON_MAX3355 + tristate "Maxim MAX3355 USB OTG EXTCON Support" + depends on GPIOLIB || COMPILE_TEST + help + If you say yes here you get support for the USB OTG role detection by + MAX3355. The MAX3355 chip integrates a charge pump and comparators to + enable a system with an integrated USB OTG dual-role transceiver to + function as an USB OTG dual-role device. + config EXTCON_MAX77693 tristate "Maxim MAX77693 EXTCON Support" depends on MFD_MAX77693 && INPUT diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index ba787d04295b..2a0e4f45d5b2 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o +obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX77843) += extcon-max77843.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c new file mode 100644 index 000000000000..c24abec5d06c --- /dev/null +++ b/drivers/extcon/extcon-max3355.c @@ -0,0 +1,146 @@ +/* + * Maxim Integrated MAX3355 USB OTG chip extcon driver + * + * Copyright (C) 2014-2015 Cogent Embedded, Inc. + * Author: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ + +#include <linux/extcon.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +struct max3355_data { + struct extcon_dev *edev; + struct gpio_desc *id_gpiod; + struct gpio_desc *shdn_gpiod; +}; + +static const unsigned int max3355_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, +}; + +static irqreturn_t max3355_id_irq(int irq, void *dev_id) +{ + struct max3355_data *data = dev_id; + int id = gpiod_get_value_cansleep(data->id_gpiod); + + if (id) { + /* + * ID = 1 means USB HOST cable detached. + * As we don't have event for USB peripheral cable attached, + * we simulate USB peripheral attach here. + */ + extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, false); + extcon_set_cable_state_(data->edev, EXTCON_USB, true); + } else { + /* + * ID = 0 means USB HOST cable attached. + * As we don't have event for USB peripheral cable detached, + * we simulate USB peripheral detach here. + */ + extcon_set_cable_state_(data->edev, EXTCON_USB, false); + extcon_set_cable_state_(data->edev, EXTCON_USB_HOST, true); + } + + return IRQ_HANDLED; +} + +static int max3355_probe(struct platform_device *pdev) +{ + struct max3355_data *data; + struct gpio_desc *gpiod; + int irq, err; + + data = devm_kzalloc(&pdev->dev, sizeof(struct max3355_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN); + if (IS_ERR(gpiod)) { + dev_err(&pdev->dev, "failed to get ID_OUT GPIO\n"); + return PTR_ERR(gpiod); + } + data->id_gpiod = gpiod; + + gpiod = devm_gpiod_get(&pdev->dev, "maxim,shdn", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) { + dev_err(&pdev->dev, "failed to get SHDN# GPIO\n"); + return PTR_ERR(gpiod); + } + data->shdn_gpiod = gpiod; + + data->edev = devm_extcon_dev_allocate(&pdev->dev, max3355_cable); + if (IS_ERR(data->edev)) { + dev_err(&pdev->dev, "failed to allocate extcon device\n"); + return PTR_ERR(data->edev); + } + + err = devm_extcon_dev_register(&pdev->dev, data->edev); + if (err < 0) { + dev_err(&pdev->dev, "failed to register extcon device\n"); + return err; + } + + irq = gpiod_to_irq(data->id_gpiod); + if (irq < 0) { + dev_err(&pdev->dev, "failed to translate ID_OUT GPIO to IRQ\n"); + return irq; + } + + err = devm_request_threaded_irq(&pdev->dev, irq, NULL, max3355_id_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + pdev->name, data); + if (err < 0) { + dev_err(&pdev->dev, "failed to request ID_OUT IRQ\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + /* Perform initial detection */ + max3355_id_irq(irq, data); + + return 0; +} + +static int max3355_remove(struct platform_device *pdev) +{ + struct max3355_data *data = platform_get_drvdata(pdev); + + gpiod_set_value_cansleep(data->shdn_gpiod, 0); + + return 0; +} + +static const struct of_device_id max3355_match_table[] = { + { .compatible = "maxim,max3355", }, + { } +}; +MODULE_DEVICE_TABLE(of, max3355_match_table); + +static struct platform_driver max3355_driver = { + .probe = max3355_probe, + .remove = max3355_remove, + .driver = { + .name = "extcon-max3355", + .of_match_table = max3355_match_table, + }, +}; + +module_platform_driver(max3355_driver); + +MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>"); +MODULE_DESCRIPTION("Maxim MAX3355 extcon driver"); +MODULE_LICENSE("GPL v2"); |