diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml | 143 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/sdhci-cadence.txt | 80 |
2 files changed, 143 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml new file mode 100644 index 000000000000..2f45dd0d04db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/cdns,sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + - Piotr Sroka <piotrs@cadence.com> + +allOf: + - $ref: mmc-controller.yaml + +properties: + compatible: + items: + - enum: + - socionext,uniphier-sd4hc + - const: cdns,sd4hc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + # PHY DLL input delays: + # They are used to delay the data valid window, and align the window to + # sampling clock. The delay starts from 5ns (for delay parameter equal to 0) + # and it is increased by 2.5ns in each step. + + cdns,phy-input-delay-sd-highspeed: + description: Value of the delay in the input path for SD high-speed timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-legacy: + description: Value of the delay in the input path for legacy timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr12: + description: Value of the delay in the input path for SD UHS SDR12 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr25: + description: Value of the delay in the input path for SD UHS SDR25 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-sdr50: + description: Value of the delay in the input path for SD UHS SDR50 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-sd-uhs-ddr50: + description: Value of the delay in the input path for SD UHS DDR50 timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-mmc-highspeed: + description: Value of the delay in the input path for MMC high-speed timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + cdns,phy-input-delay-mmc-ddr: + description: Value of the delay in the input path for eMMC high-speed DDR timing + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x1f + + # PHY DLL clock delays: + # Each delay property represents the fraction of the clock period. + # The approximate delay value will be + # (<delay property value>/128)*sdmclk_clock_period. + + cdns,phy-dll-delay-sdclk: + description: | + Value of the delay introduced on the sdclk output for all modes except + HS200, HS400 and HS400_ES. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + + cdns,phy-dll-delay-sdclk-hsmmc: + description: | + Value of the delay introduced on the sdclk output for HS200, HS400 and + HS400_ES speed modes. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + + cdns,phy-dll-delay-strobe: + description: | + Value of the delay introduced on the dat_strobe input used in + HS400 / HS400_ES speed modes. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - minimum: 0 + - maximum: 0x7f + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + emmc: mmc@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cdns,phy-dll-delay-sdclk = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt deleted file mode 100644 index fa423c277853..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt +++ /dev/null @@ -1,80 +0,0 @@ -* Cadence SD/SDIO/eMMC Host Controller - -Required properties: -- compatible: should be one of the following: - "cdns,sd4hc" - default of the IP - "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs -- reg: offset and length of the register set for the device. -- interrupts: a single interrupt specifier. -- clocks: phandle to the input clock. - -Optional properties: -For eMMC configuration, supported speed modes are not indicated by the SDHCI -Capabilities Register. Instead, the following properties should be specified -if supported. See mmc.txt for details. -- mmc-ddr-1_8v -- mmc-ddr-1_2v -- mmc-hs200-1_8v -- mmc-hs200-1_2v -- mmc-hs400-1_8v -- mmc-hs400-1_2v - -Some PHY delays can be configured by following properties. -PHY DLL input delays: -They are used to delay the data valid window, and align the window -to sampling clock. The delay starts from 5ns (for delay parameter equal to 0) -and it is increased by 2.5ns in each step. -- cdns,phy-input-delay-sd-highspeed: - Value of the delay in the input path for SD high-speed timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-legacy: - Value of the delay in the input path for legacy timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr12: - Value of the delay in the input path for SD UHS SDR12 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr25: - Value of the delay in the input path for SD UHS SDR25 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-sdr50: - Value of the delay in the input path for SD UHS SDR50 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-sd-uhs-ddr50: - Value of the delay in the input path for SD UHS DDR50 timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-mmc-highspeed: - Value of the delay in the input path for MMC high-speed timing - Valid range = [0:0x1F]. -- cdns,phy-input-delay-mmc-ddr: - Value of the delay in the input path for eMMC high-speed DDR timing - Valid range = [0:0x1F]. - -PHY DLL clock delays: -Each delay property represents the fraction of the clock period. -The approximate delay value will be -(<delay property value>/128)*sdmclk_clock_period. -- cdns,phy-dll-delay-sdclk: - Value of the delay introduced on the sdclk output - for all modes except HS200, HS400 and HS400_ES. - Valid range = [0:0x7F]. -- cdns,phy-dll-delay-sdclk-hsmmc: - Value of the delay introduced on the sdclk output - for HS200, HS400 and HS400_ES speed modes. - Valid range = [0:0x7F]. -- cdns,phy-dll-delay-strobe: - Value of the delay introduced on the dat_strobe input - used in HS400 / HS400_ES speed modes. - Valid range = [0:0x7F]. - -Example: - emmc: sdhci@5a000000 { - compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; - reg = <0x5a000000 0x400>; - interrupts = <0 78 4>; - clocks = <&clk 4>; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cdns,phy-dll-delay-sdclk = <0>; - }; |