diff options
| -rw-r--r-- | drivers/hwmon/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/lm95241.c | 527 |
3 files changed, 537 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 51ff9b3d7ea2..8a91c9971558 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -582,6 +582,15 @@ config SENSORS_LTC4245 This driver can also be built as a module. If so, the module will be called ltc4245. +config SENSORS_LM95241 + tristate "National Semiconductor LM95241 sensor chip" + depends on I2C + help + If you say yes here you get support for LM95241 sensor chip. + + This driver can also be built as a module. If so, the module + will be called lm95241. + config SENSORS_MAX1111 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" depends on SPI_MASTER diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index e332d6267920..81c88822a3eb 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_SENSORS_LM87) += lm87.o obj-$(CONFIG_SENSORS_LM90) += lm90.o obj-$(CONFIG_SENSORS_LM92) += lm92.o obj-$(CONFIG_SENSORS_LM93) += lm93.o +obj-$(CONFIG_SENSORS_LM95241) += lm95241.o obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o obj-$(CONFIG_SENSORS_MAX1111) += max1111.o obj-$(CONFIG_SENSORS_MAX1619) += max1619.o diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c new file mode 100644 index 000000000000..091d95f38aaa --- /dev/null +++ b/drivers/hwmon/lm95241.c @@ -0,0 +1,527 @@ +/* + * lm95241.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (C) 2008 Davide Rizzo <elpa-rizzo@gmail.com> + * + * Based on the max1619 driver. The LM95241 is a sensor chip made by National + * Semiconductors. + * It reports up to three temperatures (its own plus up to + * two external ones). Complete datasheet can be + * obtained from National's website at: + * http://www.national.com/ds.cgi/LM/LM95241.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/sysfs.h> + +static const unsigned short normal_i2c[] = { + 0x19, 0x2a, 0x2b, I2C_CLIENT_END}; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(lm95241); + +/* LM95241 registers */ +#define LM95241_REG_R_MAN_ID 0xFE +#define LM95241_REG_R_CHIP_ID 0xFF +#define LM95241_REG_R_STATUS 0x02 +#define LM95241_REG_RW_CONFIG 0x03 +#define LM95241_REG_RW_REM_FILTER 0x06 +#define LM95241_REG_RW_TRUTHERM 0x07 +#define LM95241_REG_W_ONE_SHOT 0x0F +#define LM95241_REG_R_LOCAL_TEMPH 0x10 +#define LM95241_REG_R_REMOTE1_TEMPH 0x11 +#define LM95241_REG_R_REMOTE2_TEMPH 0x12 +#define LM95241_REG_R_LOCAL_TEMPL 0x20 +#define LM95241_REG_R_REMOTE1_TEMPL 0x21 +#define LM95241_REG_R_REMOTE2_TEMPL 0x22 +#define LM95241_REG_RW_REMOTE_MODEL 0x30 + +/* LM95241 specific bitfields */ +#define CFG_STOP 0x40 +#define CFG_CR0076 0x00 +#define CFG_CR0182 0x10 +#define CFG_CR1000 0x20 +#define CFG_CR2700 0x30 +#define R1MS_SHIFT 0 +#define R2MS_SHIFT 2 +#define R1MS_MASK (0x01 << (R1MS_SHIFT)) +#define R2MS_MASK (0x01 << (R2MS_SHIFT)) +#define R1DF_SHIFT 1 +#define R2DF_SHIFT 2 +#define R1DF_MASK (0x01 << (R1DF_SHIFT)) +#define R2DF_MASK (0x01 << (R2DF_SHIFT)) +#define R1FE_MASK 0x01 +#define R2FE_MASK 0x05 +#define TT1_SHIFT 0 +#define TT2_SHIFT 4 +#define TT_OFF 0 +#define TT_ON 1 +#define TT_MASK 7 +#define MANUFACTURER_ID 0x01 +#define DEFAULT_REVISION 0xA4 + +/* Conversions and various macros */ +#define TEMP_FROM_REG(val_h, val_l) (((val_h) & 0x80 ? (val_h) - 0x100 : \ + (val_h)) * 1000 + (val_l) * 1000 / 256) + +/* Functions declaration */ +static int lm95241_attach_adapter(struct i2c_adapter *adapter); +static int lm95241_detect(struct i2c_adapter *adapter, int address, + int kind); +static void lm95241_init_client(struct i2c_client *client); +static int lm95241_detach_client(struct i2c_client *client); +static struct lm95241_data *lm95241_update_device(struct device *dev); + +/* Driver data (common to all clients) */ +static struct i2c_driver lm95241_driver = { + .driver = { + .name = "lm95241", + }, + .attach_adapter = lm95241_attach_adapter, + .detach_client = lm95241_detach_client, +}; + +/* Client data (each client gets its own) */ +struct lm95241_data { + struct i2c_client client; + struct device *hwmon_dev; + struct mutex update_lock; + unsigned long last_updated, rate; /* in jiffies */ + char valid; /* zero until following fields are valid */ + /* registers values */ + u8 local_h, local_l; /* local */ + u8 remote1_h, remote1_l; /* remote1 */ + u8 remote2_h, remote2_l; /* remote2 */ + u8 config, model, trutherm; +}; + +/* Sysfs stuff */ +#define show_temp(value) \ +static ssize_t show_##value(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct lm95241_data *data = lm95241_update_device(dev); \ + snprintf(buf, PAGE_SIZE - 1, "%d\n", \ + TEMP_FROM_REG(data->value##_h, data->value##_l)); \ + return strlen(buf); \ +} +show_temp(local); +show_temp(remote1); +show_temp(remote2); + +static ssize_t show_rate(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct lm95241_data *data = lm95241_update_device(dev); + + snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->rate / HZ); + return strlen(buf); +} + +static ssize_t set_rate(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm95241_data *data = i2c_get_clientdata(client); + + strict_strtol(buf, 10, &data->rate); + data->rate = data->rate * HZ / 1000; + + return count; +} + +#define show_type(flag) \ +static ssize_t show_type##flag(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm95241_data *data = i2c_get_clientdata(client); \ +\ + snprintf(buf, PAGE_SIZE - 1, \ + data->model & R##flag##MS_MASK ? "1\n" : "2\n"); \ + return strlen(buf); \ +} +show_type(1); +show_type(2); + +#define show_min(flag) \ +static ssize_t show_min##flag(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm95241_data *data = i2c_get_clientdata(client); \ +\ + snprintf(buf, PAGE_SIZE - 1, \ + data->config & R##flag##DF_MASK ? \ + "-127000\n" : "0\n"); \ + return strlen(buf); \ +} +show_min(1); +show_min(2); + +#define show_max(flag) \ +static ssize_t show_max##flag(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm95241_data *data = i2c_get_clientdata(client); \ +\ + snprintf(buf, PAGE_SIZE - 1, \ + data->config & R##flag##DF_MASK ? \ + "127000\n" : "255000\n"); \ + return strlen(buf); \ +} +show_max(1); +show_max(2); + +#define set_type(flag) \ +static ssize_t set_type##flag(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm95241_data *data = i2c_get_clientdata(client); \ +\ + long val; \ + strict_strtol(buf, 10, &val); \ +\ + if ((val == 1) || (val == 2)) { \ +\ + mutex_lock(&data->update_lock); \ +\ + data->trutherm &= ~(TT_MASK << TT##flag##_SHIFT); \ + if (val == 1) { \ + data->model |= R##flag##MS_MASK; \ + data->trutherm |= (TT_ON << TT##flag##_SHIFT); \ + } \ + else { \ + data->model &= ~R##flag##MS_MASK; \ + data->trutherm |= (TT_OFF << TT##flag##_SHIFT); \ + } \ +\ + data->valid = 0; \ +\ + i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, \ + data->model); \ + i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, \ + data->trutherm); \ +\ + mutex_unlock(&data->update_lock); \ +\ + } \ + return count; \ +} +set_type(1); +set_type(2); + +#define set_min(flag) \ +static ssize_t set_min##flag(struct device *dev, \ + struct device_attribute *devattr, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm95241_data *data = i2c_get_clientdata(client); \ +\ + long val; \ + strict_strtol(buf, 10, &val); \ +\ + mutex_lock(&data->update_lock); \ +\ + if (val < 0) \ + data->config |= R##flag##DF_MASK; \ + else \ + data->config &= ~R##flag##DF_MASK; \ +\ + data->valid = 0; \ +\ + i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \ + data->config); \ +\ + mutex_unlock(&data->update_lock); \ +\ + return count; \ +} +set_min(1); +set_min(2); + +#define set_max(flag) \ +static ssize_t set_max##flag(struct device *dev, \ + struct device_attribute *devattr, const char *buf, size_t count) \ +{ \ + struct i2c_client *client = to_i2c_client(dev); \ + struct lm95241_data *data = i2c_get_clientdata(client); \ +\ + long val; \ + strict_strtol(buf, 10, &val); \ +\ + mutex_lock(&data->update_lock); \ +\ + if (val <= 127000) \ + data->config |= R##flag##DF_MASK; \ + else \ + data->config &= ~R##flag##DF_MASK; \ +\ + data->valid = 0; \ +\ + i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \ + data->config); \ +\ + mutex_unlock(&data->update_lock); \ +\ + return count; \ +} +set_max(1); +set_max(2); + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_local, NULL); +static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote1, NULL); +static DEVICE_ATTR(temp3_input, S_IRUGO, show_remote2, NULL); +static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type1, set_type1); +static DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type2, set_type2); +static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1); +static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2); +static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1); +static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2); +static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, set_rate); + +static struct attribute *lm95241_attributes[] = { + &dev_attr_temp1_input.attr, + &dev_attr_temp2_input.attr, + &dev_attr_temp3_input.attr, + &dev_attr_temp2_type.attr, + &dev_attr_temp3_type.attr, + &dev_attr_temp2_min.attr, + &dev_attr_temp3_min.attr, + &dev_attr_temp2_max.attr, + &dev_attr_temp3_max.attr, + &dev_attr_rate.attr, + NULL +}; + +static const struct attribute_group lm95241_group = { + .attrs = lm95241_attributes, +}; + +/* Init/exit code */ +static int lm95241_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, lm95241_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm95241_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm95241_data *data; + int err = 0; + const char *name = ""; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + /* The common I2C client data is placed right before the + LM95241-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm95241_driver; + new_client->flags = 0; + + /* + * Now we do the remaining detection. A negative kind means that + * the driver was loaded with no force parameter (default), so we + * must both detect and identify the chip. A zero kind means that + * the driver was loaded with the force parameter, the detection + * step shall be skipped. A positive kind means that the driver + * was loaded with the force parameter and a given kind of chip is + * requested, so both the detection and the identification steps + * are skipped. + */ + if (kind < 0) { /* detection */ + if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) + != MANUFACTURER_ID) + || (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) + < DEFAULT_REVISION)) { + dev_dbg(&adapter->dev, + "LM95241 detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + if (kind <= 0) { /* identification */ + if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) + == MANUFACTURER_ID) + && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) + >= DEFAULT_REVISION)) { + + kind = lm95241; + + if (kind <= 0) { /* identification failed */ + dev_info(&adapter->dev, "Unsupported chip\n"); + goto exit_free; + } + } + } + + if (kind == lm95241) + name = "lm95241"; + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, name, I2C_NAME_SIZE); + data->valid = 0; + mutex_init(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + err = i2c_attach_client(new_client); + if (err) + goto exit_free; + + /* Initialize the LM95241 chip */ + lm95241_init_client(new_client); + + /* Register sysfs hooks */ + err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group); + if (err) + goto exit_detach; + + data->hwmon_dev = hwmon_device_register(&new_client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove_files; + } + + return 0; + +exit_remove_files: + sysfs_remove_group(&new_client->dev.kobj, &lm95241_group); +exit_detach: + i2c_detach_client(new_client); +exit_free: + kfree(data); +exit: + return err; +} + +static void lm95241_init_client(struct i2c_client *client) +{ + struct lm95241_data *data = i2c_get_clientdata(client); + + data->rate = HZ; /* 1 sec default */ + data->valid = 0; + data->config = CFG_CR0076; + data->model = 0; + data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT); + + i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, + data->config); + i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER, + R1FE_MASK | R2FE_MASK); + i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, + data->trutherm); + i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, + data->model); +} + +static int lm95241_detach_client(struct i2c_client *client) +{ + struct lm95241_data *data = i2c_get_clientdata(client); + int err; + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &lm95241_group); + + err = i2c_detach_client(client); + if (err) + return err; + + kfree(data); + return 0; +} + +static struct lm95241_data *lm95241_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm95241_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + data->rate) || + !data->valid) { + dev_dbg(&client->dev, "Updating lm95241 data.\n"); + data->local_h = + i2c_smbus_read_byte_data(client, + LM95241_REG_R_LOCAL_TEMPH); + data->local_l = + i2c_smbus_read_byte_data(client, + LM95241_REG_R_LOCAL_TEMPL); + data->remote1_h = + i2c_smbus_read_byte_data(client, + LM95241_REG_R_REMOTE1_TEMPH); + data->remote1_l = + i2c_smbus_read_byte_data(client, + LM95241_REG_R_REMOTE1_TEMPL); + data->remote2_h = + i2c_smbus_read_byte_data(client, + LM95241_REG_R_REMOTE2_TEMPH); + data->remote2_l = + i2c_smbus_read_byte_data(client, + LM95241_REG_R_REMOTE2_TEMPL); + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init sensors_lm95241_init(void) +{ + return i2c_add_driver(&lm95241_driver); +} + +static void __exit sensors_lm95241_exit(void) +{ + i2c_del_driver(&lm95241_driver); +} + +MODULE_AUTHOR("Davide Rizzo <elpa-rizzo@gmail.com>"); +MODULE_DESCRIPTION("LM95241 sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm95241_init); +module_exit(sensors_lm95241_exit); |