summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/w83781d18
-rw-r--r--drivers/hwmon/Kconfig6
-rw-r--r--drivers/hwmon/w83781d.c29
3 files changed, 14 insertions, 39 deletions
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index dbeadb269a69..6f800a0283e9 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -14,10 +14,6 @@ Supported chips:
Prefix: 'w83783s'
Addresses scanned: I2C 0x2d
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
- * Winbond W83627HF
- Prefix: 'w83627hf'
- Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
- Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
* Asus AS99127F
Prefix: 'as99127f'
Addresses scanned: I2C 0x28 - 0x2f
@@ -50,20 +46,18 @@ force_subclients=bus,caddr,saddr,saddr
Description
-----------
-This driver implements support for the Winbond W83781D, W83782D, W83783S,
-W83627HF chips, and the Asus AS99127F chips. We will refer to them
-collectively as W8378* chips.
+This driver implements support for the Winbond W83781D, W83782D, W83783S
+chips, and the Asus AS99127F chips. We will refer to them collectively as
+W8378* chips.
There is quite some difference between these chips, but they are similar
enough that it was sensible to put them together in one driver.
-The W83627HF chip is assumed to be identical to the ISA W83782D.
The Asus chips are similar to an I2C-only W83782D.
Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
as99127f 7 3 0 3 0x31 0x12c3 yes no
as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
-w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
@@ -143,9 +137,9 @@ Individual alarm and beep bits:
0x000400: in6
0x000800: fan3
0x001000: chassis
-0x002000: temp3 (W83782D and W83627HF only)
-0x010000: in7 (W83782D and W83627HF only)
-0x020000: in8 (W83782D and W83627HF only)
+0x002000: temp3 (W83782D only)
+0x010000: in7 (W83782D only)
+0x020000: in8 (W83782D only)
If an alarm triggers, it will remain triggered until the hardware register
is read at least once. This means that the cause for the alarm may
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index af43d566d770..27e0b34ead5f 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -631,13 +631,13 @@ config SENSORS_VT8231
will be called vt8231.
config SENSORS_W83781D
- tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
+ tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W8378x series
- of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
- and the similar Asus AS99127F.
+ of sensor chips: the W83781D, W83782D and W83783S, and the similar
+ Asus AS99127F.
This driver can also be built as a module. If so, the module
will be called w83781d.
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d38b9ede3abd..8d4d1acbf650 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -28,7 +28,6 @@
as99127f 7 3 0 3 0x31 0x12c3 yes no
as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
- w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
@@ -59,7 +58,7 @@ static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
static unsigned short isa_address = 0x290;
/* Insmod parameters */
-I2C_CLIENT_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
+I2C_CLIENT_INSMOD_4(w83781d, w83782d, w83783s, as99127f);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
@@ -113,7 +112,7 @@ MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
#define W83781D_REG_ALARM1 0x41
#define W83781D_REG_ALARM2 0x42
-/* Real-time status (W83782D, W83783S, W83627HF) */
+/* Real-time status (W83782D, W83783S) */
#define W83782D_REG_ALARM1 0x459
#define W83782D_REG_ALARM2 0x45A
#define W83782D_REG_ALARM3 0x45B
@@ -962,8 +961,6 @@ w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
client_name = "w83782d subclient";
else if (kind == w83783s)
client_name = "w83783s subclient";
- else if (kind == w83627hf)
- client_name = "w83627hf subclient";
else if (kind == as99127f)
client_name = "as99127f subclient";
@@ -1267,8 +1264,6 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
kind = w83782d;
else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
kind = w83783s;
- else if (val1 == 0x21 && vendid == winbond)
- kind = w83627hf;
else if (val1 == 0x31)
kind = as99127f;
else {
@@ -1287,8 +1282,6 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
client_name = "w83782d";
} else if (kind == w83783s) {
client_name = "w83783s";
- } else if (kind == w83627hf) {
- client_name = "w83627hf";
} else if (kind == as99127f) {
client_name = "as99127f";
}
@@ -1395,10 +1388,6 @@ w83781d_isa_probe(struct platform_device *pdev)
reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
switch (reg) {
- case 0x21:
- data->type = w83627hf;
- name = "w83627hf";
- break;
case 0x30:
data->type = w83782d;
name = "w83782d";
@@ -1598,11 +1587,6 @@ w83781d_init_device(struct device *dev)
int type = data->type;
u8 tmp;
- if (type == w83627hf)
- dev_info(dev, "The W83627HF chip is better supported by the "
- "w83627hf driver, support will be dropped from the "
- "w83781d driver soon\n");
-
if (reset && type != as99127f) { /* this resets registers we don't have
documentation for on the as99127f */
/* Resetting the chip has been the default for a long time,
@@ -1716,8 +1700,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
w83781d_read_value(data, W83781D_REG_IN_MIN(i));
data->in_max[i] =
w83781d_read_value(data, W83781D_REG_IN_MAX(i));
- if ((data->type != w83782d)
- && (data->type != w83627hf) && (i == 6))
+ if ((data->type != w83782d) && (i == 6))
break;
}
for (i = 0; i < 3; i++) {
@@ -1775,7 +1758,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
data->fan_div[1] |= (i >> 4) & 0x04;
data->fan_div[2] |= (i >> 5) & 0x04;
}
- if ((data->type == w83782d) || (data->type == w83627hf)) {
+ if (data->type == w83782d) {
data->alarms = w83781d_read_value(data,
W83782D_REG_ALARM1)
| (w83781d_read_value(data,
@@ -1885,13 +1868,11 @@ w83781d_isa_found(unsigned short address)
outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
val = inb_p(address + W83781D_DATA_REG_OFFSET);
if ((val & 0xfe) == 0x10 /* W83781D */
- || val == 0x30 /* W83782D */
- || val == 0x21) /* W83627HF */
+ || val == 0x30) /* W83782D */
found = 1;
if (found)
pr_info("w83781d: Found a %s chip at %#x\n",
- val == 0x21 ? "W83627HF" :
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release: