diff options
-rw-r--r-- | drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 24 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/gianfar.c | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/freescale/ucc_geth.c | 8 | ||||
-rw-r--r-- | drivers/net/ethernet/marvell/mvneta.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 |
5 files changed, 30 insertions, 9 deletions
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c index cfa37041ab71..c4bb8027b3fb 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -689,16 +689,24 @@ static int xgene_enet_phy_connect(struct net_device *ndev) netdev_dbg(ndev, "No phy-handle found in DT\n"); return -ENODEV; } - pdata->phy_dev = of_phy_find_device(phy_np); - } - phy_dev = pdata->phy_dev; + phy_dev = of_phy_connect(ndev, phy_np, &xgene_enet_adjust_link, + 0, pdata->phy_mode); + if (!phy_dev) { + netdev_err(ndev, "Could not connect to PHY\n"); + return -ENODEV; + } + + pdata->phy_dev = phy_dev; + } else { + phy_dev = pdata->phy_dev; - if (!phy_dev || - phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link, - pdata->phy_mode)) { - netdev_err(ndev, "Could not connect to PHY\n"); - return -ENODEV; + if (!phy_dev || + phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link, + pdata->phy_mode)) { + netdev_err(ndev, "Could not connect to PHY\n"); + return -ENODEV; + } } pdata->phy_speed = SPEED_UNKNOWN; diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 803ed4c93503..a5cf4332d307 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1702,6 +1702,7 @@ static void gfar_configure_serdes(struct net_device *dev) tbiphy = of_phy_find_device(priv->tbi_node); if (!tbiphy) { dev_err(&dev->dev, "error: Could not get TBI device\n"); + put_device(&tbiphy->dev); return; } @@ -1723,6 +1724,8 @@ static void gfar_configure_serdes(struct net_device *dev) phy_write(tbiphy, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + + put_device(&tbiphy->dev); } static int __gfar_is_rx_idle(struct gfar_private *priv) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 4dd40e057f40..650f7888e32b 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -1384,6 +1384,8 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) value = phy_read(tbiphy, ENET_TBI_MII_CR); value &= ~0x1000; /* Turn off autonegotiation */ phy_write(tbiphy, ENET_TBI_MII_CR, value); + + put_device(&tbiphy->dev); } init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2); @@ -1702,8 +1704,10 @@ static void uec_configure_serdes(struct net_device *dev) * everything for us? Resetting it takes the link down and requires * several seconds for it to come back. */ - if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) + if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) { + put_device(&tbiphy->dev); return; + } /* Single clk mode, mii mode off(for serdes communication) */ phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); @@ -1711,6 +1715,8 @@ static void uec_configure_serdes(struct net_device *dev) phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); + + put_device(&tbiphy->dev); } /* Configure the PHY for dev. diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 09ec32e33076..514df76fc70f 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3175,6 +3175,8 @@ static int mvneta_probe(struct platform_device *pdev) struct phy_device *phy = of_phy_find_device(dn); mvneta_fixed_link_update(pp, phy); + + put_device(&phy->dev); } return 0; diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 6008eee01a33..cf468c87ce57 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -828,6 +828,8 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) if (!phydev) dev_info(dev, "MDIO of the phy is not registered yet\n"); + else + put_device(&phydev->dev); return 0; } |