Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - disable the 32-bit vdso when building LE, so we can build with a
   64-bit only toolchain.

 - EEH fixes from Gavin & Richard.

 - enable the sys_kcmp syscall from Laurent.

 - sysfs control for fastsleep workaround from Shreyas.

 - expose OPAL events as an irq chip by Alistair.

 - MSI ops moved to pci_controller_ops by Daniel.

 - fix for kernel to userspace backtraces for perf from Anton.

 - merge pseries and pseries_le defconfigs from Cyril.

 - CXL in-kernel API from Mikey.

 - OPAL prd driver from Jeremy.

 - fix for DSCR handling & tests from Anshuman.

 - Powernv flash mtd driver from Cyril.

 - dynamic DMA Window support on powernv from Alexey.

 - LLVM clang fixes & workarounds from Anton.

 - reworked version of the patch to abort syscalls when transactional.

 - fix the swap encoding to support 4TB, from Aneesh.

 - various fixes as usual.

 - Freescale updates from Scott: Highlights include more 8xx
   optimizations, an e6500 hugetlb optimization, QMan device tree nodes,
   t1024/t1023 support, and various fixes and cleanup.

* tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits)
  cxl: Fix typo in debug print
  cxl: Add CXL_KERNEL_API config option
  powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()
  powerpc/mm: Change the swap encoding in pte.
  powerpc/mm: PTE_RPN_MAX is not used, remove the same
  powerpc/tm: Abort syscalls in active transactions
  powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off
  powerpc/include: Add opal-prd to installed uapi headers
  powerpc/powernv: fix construction of opal PRD messages
  powerpc/powernv: Increase opal-irqchip initcall priority
  powerpc: Make doorbell check preemption safe
  powerpc/powernv: pnv_init_idle_states() should only run on powernv
  macintosh/nvram: Remove as unused
  powerpc: Don't use gcc specific options on clang
  powerpc: Don't use -mno-strict-align on clang
  powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it
  powerpc: Only use -mabi=altivec if toolchain supports it
  powerpc: Fix duplicate const clang warning in user access code
  vfio: powerpc/spapr: Support Dynamic DMA windows
  vfio: powerpc/spapr: Register memory and define IOMMU v2
  ...

15 files changed, 810 insertions, 22 deletions

diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile
index 5ad042345ab9..03ca2e64b3fc 100644
--- a/tools/testing/selftests/powerpc/Makefile
+++ b/tools/testing/selftests/powerpc/Makefile
@@ -12,7 +12,7 @@ CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CUR
 
 export CFLAGS
 
-SUB_DIRS = pmu copyloops mm tm primitives stringloops vphn switch_endian
+SUB_DIRS = pmu copyloops mm tm primitives stringloops vphn switch_endian dscr
 
 endif
 
diff --git a/tools/testing/selftests/powerpc/dscr/.gitignore b/tools/testing/selftests/powerpc/dscr/.gitignore
new file mode 100644
index 000000000000..b585c6c1564a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/.gitignore
@@ -0,0 +1,7 @@
+dscr_default_test
+dscr_explicit_test
+dscr_inherit_exec_test
+dscr_inherit_test
+dscr_sysfs_test
+dscr_sysfs_thread_test
+dscr_user_test
diff --git a/tools/testing/selftests/powerpc/dscr/Makefile b/tools/testing/selftests/powerpc/dscr/Makefile
new file mode 100644
index 000000000000..49327ee84e3a
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/Makefile
@@ -0,0 +1,14 @@
+TEST_PROGS := dscr_default_test dscr_explicit_test dscr_user_test	\
+	      dscr_inherit_test dscr_inherit_exec_test dscr_sysfs_test	\
+	      dscr_sysfs_thread_test
+
+dscr_default_test: LDLIBS += -lpthread
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+clean:
+	rm -f $(TEST_PROGS) *.o
diff --git a/tools/testing/selftests/powerpc/dscr/dscr.h b/tools/testing/selftests/powerpc/dscr/dscr.h
new file mode 100644
index 000000000000..a36af1b2c2bb
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr.h
@@ -0,0 +1,127 @@
+/*
+ * POWER Data Stream Control Register (DSCR)
+ *
+ * This header file contains helper functions and macros
+ * required for all the DSCR related test cases.
+ *
+ * Copyright 2012, Anton Blanchard, IBM Corporation.
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#ifndef _SELFTESTS_POWERPC_DSCR_DSCR_H
+#define _SELFTESTS_POWERPC_DSCR_DSCR_H
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <dirent.h>
+#include <pthread.h>
+#include <sched.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+#include "utils.h"
+
+#define SPRN_DSCR	0x11	/* Privilege state SPR */
+#define SPRN_DSCR_USR	0x03	/* Problem state SPR */
+#define THREADS		100	/* Max threads */
+#define COUNT		100	/* Max iterations */
+#define DSCR_MAX	16	/* Max DSCR value */
+#define LEN_MAX		100	/* Max name length */
+
+#define DSCR_DEFAULT	"/sys/devices/system/cpu/dscr_default"
+#define CPU_PATH	"/sys/devices/system/cpu/"
+
+#define rmb()  asm volatile("lwsync":::"memory")
+#define wmb()  asm volatile("lwsync":::"memory")
+
+#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x))
+
+/* Prilvilege state DSCR access */
+inline unsigned long get_dscr(void)
+{
+	unsigned long ret;
+
+	asm volatile("mfspr %0,%1" : "=r" (ret): "i" (SPRN_DSCR));
+
+	return ret;
+}
+
+inline void set_dscr(unsigned long val)
+{
+	asm volatile("mtspr %1,%0" : : "r" (val), "i" (SPRN_DSCR));
+}
+
+/* Problem state DSCR access */
+inline unsigned long get_dscr_usr(void)
+{
+	unsigned long ret;
+
+	asm volatile("mfspr %0,%1" : "=r" (ret): "i" (SPRN_DSCR_USR));
+
+	return ret;
+}
+
+inline void set_dscr_usr(unsigned long val)
+{
+	asm volatile("mtspr %1,%0" : : "r" (val), "i" (SPRN_DSCR_USR));
+}
+
+/* Default DSCR access */
+unsigned long get_default_dscr(void)
+{
+	int fd = -1, ret;
+	char buf[16];
+	unsigned long val;
+
+	if (fd == -1) {
+		fd = open(DSCR_DEFAULT, O_RDONLY);
+		if (fd == -1) {
+			perror("open() failed");
+			exit(1);
+		}
+	}
+	memset(buf, 0, sizeof(buf));
+	lseek(fd, 0, SEEK_SET);
+	ret = read(fd, buf, sizeof(buf));
+	if (ret == -1) {
+		perror("read() failed");
+		exit(1);
+	}
+	sscanf(buf, "%lx", &val);
+	close(fd);
+	return val;
+}
+
+void set_default_dscr(unsigned long val)
+{
+	int fd = -1, ret;
+	char buf[16];
+
+	if (fd == -1) {
+		fd = open(DSCR_DEFAULT, O_RDWR);
+		if (fd == -1) {
+			perror("open() failed");
+			exit(1);
+		}
+	}
+	sprintf(buf, "%lx\n", val);
+	ret = write(fd, buf, strlen(buf));
+	if (ret == -1) {
+		perror("write() failed");
+		exit(1);
+	}
+	close(fd);
+}
+
+double uniform_deviate(int seed)
+{
+	return seed * (1.0 / (RAND_MAX + 1.0));
+}
+#endif	/* _SELFTESTS_POWERPC_DSCR_DSCR_H */
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_default_test.c b/tools/testing/selftests/powerpc/dscr/dscr_default_test.c
new file mode 100644
index 000000000000..df17c3bab0a7
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_default_test.c
@@ -0,0 +1,127 @@
+/*
+ * POWER Data Stream Control Register (DSCR) default test
+ *
+ * This test modifies the system wide default DSCR through
+ * it's sysfs interface and then verifies that all threads
+ * see the correct changed DSCR value immediately.
+ *
+ * Copyright 2012, Anton Blanchard, IBM Corporation.
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include "dscr.h"
+
+static unsigned long dscr;		/* System DSCR default */
+static unsigned long sequence;
+static unsigned long result[THREADS];
+
+static void *do_test(void *in)
+{
+	unsigned long thread = (unsigned long)in;
+	unsigned long i;
+
+	for (i = 0; i < COUNT; i++) {
+		unsigned long d, cur_dscr, cur_dscr_usr;
+		unsigned long s1, s2;
+
+		s1 = ACCESS_ONCE(sequence);
+		if (s1 & 1)
+			continue;
+		rmb();
+
+		d = dscr;
+		cur_dscr = get_dscr();
+		cur_dscr_usr = get_dscr_usr();
+
+		rmb();
+		s2 = sequence;
+
+		if (s1 != s2)
+			continue;
+
+		if (cur_dscr != d) {
+			fprintf(stderr, "thread %ld kernel DSCR should be %ld "
+				"but is %ld\n", thread, d, cur_dscr);
+			result[thread] = 1;
+			pthread_exit(&result[thread]);
+		}
+
+		if (cur_dscr_usr != d) {
+			fprintf(stderr, "thread %ld user DSCR should be %ld "
+				"but is %ld\n", thread, d, cur_dscr_usr);
+			result[thread] = 1;
+			pthread_exit(&result[thread]);
+		}
+	}
+	result[thread] = 0;
+	pthread_exit(&result[thread]);
+}
+
+int dscr_default(void)
+{
+	pthread_t threads[THREADS];
+	unsigned long i, *status[THREADS];
+	unsigned long orig_dscr_default;
+
+	orig_dscr_default = get_default_dscr();
+
+	/* Initial DSCR default */
+	dscr = 1;
+	set_default_dscr(dscr);
+
+	/* Spawn all testing threads */
+	for (i = 0; i < THREADS; i++) {
+		if (pthread_create(&threads[i], NULL, do_test, (void *)i)) {
+			perror("pthread_create() failed");
+			goto fail;
+		}
+	}
+
+	srand(getpid());
+
+	/* Keep changing the DSCR default */
+	for (i = 0; i < COUNT; i++) {
+		double ret = uniform_deviate(rand());
+
+		if (ret < 0.0001) {
+			sequence++;
+			wmb();
+
+			dscr++;
+			if (dscr > DSCR_MAX)
+				dscr = 0;
+
+			set_default_dscr(dscr);
+
+			wmb();
+			sequence++;
+		}
+	}
+
+	/* Individual testing thread exit status */
+	for (i = 0; i < THREADS; i++) {
+		if (pthread_join(threads[i], (void **)&(status[i]))) {
+			perror("pthread_join() failed");
+			goto fail;
+		}
+
+		if (*status[i]) {
+			printf("%ldth thread failed to join with %ld status\n",
+								i, *status[i]);
+			goto fail;
+		}
+	}
+	set_default_dscr(orig_dscr_default);
+	return 0;
+fail:
+	set_default_dscr(orig_dscr_default);
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(dscr_default, "dscr_default_test");
+}
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_explicit_test.c b/tools/testing/selftests/powerpc/dscr/dscr_explicit_test.c
new file mode 100644
index 000000000000..ad9c3ec26048
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_explicit_test.c
@@ -0,0 +1,71 @@
+/*
+ * POWER Data Stream Control Register (DSCR) explicit test
+ *
+ * This test modifies the DSCR value using mtspr instruction and
+ * verifies the change with mfspr instruction. It uses both the
+ * privilege state SPR and the problem state SPR for this purpose.
+ *
+ * When using the privilege state SPR, the instructions such as
+ * mfspr or mtspr are priviledged and the kernel emulates them
+ * for us. Instructions using problem state SPR can be exuecuted
+ * directly without any emulation if the HW supports them. Else
+ * they also get emulated by the kernel.
+ *
+ * Copyright 2012, Anton Blanchard, IBM Corporation.
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include "dscr.h"
+
+int dscr_explicit(void)
+{
+	unsigned long i, dscr = 0;
+
+	srand(getpid());
+	set_dscr(dscr);
+
+	for (i = 0; i < COUNT; i++) {
+		unsigned long cur_dscr, cur_dscr_usr;
+		double ret = uniform_deviate(rand());
+
+		if (ret < 0.001) {
+			dscr++;
+			if (dscr > DSCR_MAX)
+				dscr = 0;
+
+			set_dscr(dscr);
+		}
+
+		cur_dscr = get_dscr();
+		if (cur_dscr != dscr) {
+			fprintf(stderr, "Kernel DSCR should be %ld but "
+					"is %ld\n", dscr, cur_dscr);
+			return 1;
+		}
+
+		ret = uniform_deviate(rand());
+		if (ret < 0.001) {
+			dscr++;
+			if (dscr > DSCR_MAX)
+				dscr = 0;
+
+			set_dscr_usr(dscr);
+		}
+
+		cur_dscr_usr = get_dscr_usr();
+		if (cur_dscr_usr != dscr) {
+			fprintf(stderr, "User DSCR should be %ld but "
+					"is %ld\n", dscr, cur_dscr_usr);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(dscr_explicit, "dscr_explicit_test");
+}
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_inherit_exec_test.c b/tools/testing/selftests/powerpc/dscr/dscr_inherit_exec_test.c
new file mode 100644
index 000000000000..8265504de571
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_inherit_exec_test.c
@@ -0,0 +1,117 @@
+/*
+ * POWER Data Stream Control Register (DSCR) fork exec test
+ *
+ * This testcase modifies the DSCR using mtspr, forks & execs and
+ * verifies that the child is using the changed DSCR using mfspr.
+ *
+ * When using the privilege state SPR, the instructions such as
+ * mfspr or mtspr are priviledged and the kernel emulates them
+ * for us. Instructions using problem state SPR can be exuecuted
+ * directly without any emulation if the HW supports them. Else
+ * they also get emulated by the kernel.
+ *
+ * Copyright 2012, Anton Blanchard, IBM Corporation.
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include "dscr.h"
+
+static char prog[LEN_MAX];
+
+static void do_exec(unsigned long parent_dscr)
+{
+	unsigned long cur_dscr, cur_dscr_usr;
+
+	cur_dscr = get_dscr();
+	cur_dscr_usr = get_dscr_usr();
+
+	if (cur_dscr != parent_dscr) {
+		fprintf(stderr, "Parent DSCR %ld was not inherited "
+				"over exec (kernel value)\n", parent_dscr);
+		exit(1);
+	}
+
+	if (cur_dscr_usr != parent_dscr) {
+		fprintf(stderr, "Parent DSCR %ld was not inherited "
+				"over exec (user value)\n", parent_dscr);
+		exit(1);
+	}
+	exit(0);
+}
+
+int dscr_inherit_exec(void)
+{
+	unsigned long i, dscr = 0;
+	pid_t pid;
+
+	for (i = 0; i < COUNT; i++) {
+		dscr++;
+		if (dscr > DSCR_MAX)
+			dscr = 0;
+
+		if (dscr == get_default_dscr())
+			continue;
+
+		if (i % 2 == 0)
+			set_dscr_usr(dscr);
+		else
+			set_dscr(dscr);
+
+		/*
+		 * XXX: Force a context switch out so that DSCR
+		 * current value is copied into the thread struct
+		 * which is required for the child to inherit the
+		 * changed value.
+		 */
+		sleep(1);
+
+		pid = fork();
+		if (pid == -1) {
+			perror("fork() failed");
+			exit(1);
+		} else if (pid) {
+			int status;
+
+			if (waitpid(pid, &status, 0) == -1) {
+				perror("waitpid() failed");
+				exit(1);
+			}
+
+			if (!WIFEXITED(status)) {
+				fprintf(stderr, "Child didn't exit cleanly\n");
+				exit(1);
+			}
+
+			if (WEXITSTATUS(status) != 0) {
+				fprintf(stderr, "Child didn't exit cleanly\n");
+				return 1;
+			}
+		} else {
+			char dscr_str[16];
+
+			sprintf(dscr_str, "%ld", dscr);
+			execlp(prog, prog, "exec", dscr_str, NULL);
+			exit(1);
+		}
+	}
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	if (argc == 3 && !strcmp(argv[1], "exec")) {
+		unsigned long parent_dscr;
+
+		parent_dscr = atoi(argv[2]);
+		do_exec(parent_dscr);
+	} else if (argc != 1) {
+		fprintf(stderr, "Usage: %s\n", argv[0]);
+		exit(1);
+	}
+
+	strncpy(prog, argv[0], strlen(argv[0]));
+	return test_harness(dscr_inherit_exec, "dscr_inherit_exec_test");
+}
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_inherit_test.c b/tools/testing/selftests/powerpc/dscr/dscr_inherit_test.c
new file mode 100644
index 000000000000..4e414caf7f40
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_inherit_test.c
@@ -0,0 +1,95 @@
+/*
+ * POWER Data Stream Control Register (DSCR) fork test
+ *
+ * This testcase modifies the DSCR using mtspr, forks and then
+ * verifies that the child process has the correct changed DSCR
+ * value using mfspr.
+ *
+ * When using the privilege state SPR, the instructions such as
+ * mfspr or mtspr are priviledged and the kernel emulates them
+ * for us. Instructions using problem state SPR can be exuecuted
+ * directly without any emulation if the HW supports them. Else
+ * they also get emulated by the kernel.
+ *
+ * Copyright 2012, Anton Blanchard, IBM Corporation.
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include "dscr.h"
+
+int dscr_inherit(void)
+{
+	unsigned long i, dscr = 0;
+	pid_t pid;
+
+	srand(getpid());
+	set_dscr(dscr);
+
+	for (i = 0; i < COUNT; i++) {
+		unsigned long cur_dscr, cur_dscr_usr;
+
+		dscr++;
+		if (dscr > DSCR_MAX)
+			dscr = 0;
+
+		if (i % 2 == 0)
+			set_dscr_usr(dscr);
+		else
+			set_dscr(dscr);
+
+		/*
+		 * XXX: Force a context switch out so that DSCR
+		 * current value is copied into the thread struct
+		 * which is required for the child to inherit the
+		 * changed value.
+		 */
+		sleep(1);
+
+		pid = fork();
+		if (pid == -1) {
+			perror("fork() failed");
+			exit(1);
+		} else if (pid) {
+			int status;
+
+			if (waitpid(pid, &status, 0) == -1) {
+				perror("waitpid() failed");
+				exit(1);
+			}
+
+			if (!WIFEXITED(status)) {
+				fprintf(stderr, "Child didn't exit cleanly\n");
+				exit(1);
+			}
+
+			if (WEXITSTATUS(status) != 0) {
+				fprintf(stderr, "Child didn't exit cleanly\n");
+				return 1;
+			}
+		} else {
+			cur_dscr = get_dscr();
+			if (cur_dscr != dscr) {
+				fprintf(stderr, "Kernel DSCR should be %ld "
+					"but is %ld\n", dscr, cur_dscr);
+				exit(1);
+			}
+
+			cur_dscr_usr = get_dscr_usr();
+			if (cur_dscr_usr != dscr) {
+				fprintf(stderr, "User DSCR should be %ld "
+					"but is %ld\n", dscr, cur_dscr_usr);
+				exit(1);
+			}
+			exit(0);
+		}
+	}
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(dscr_inherit, "dscr_inherit_test");
+}
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c
new file mode 100644
index 000000000000..17fb1b43c320
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c
@@ -0,0 +1,97 @@
+/*
+ * POWER Data Stream Control Register (DSCR) sysfs interface test
+ *
+ * This test updates to system wide DSCR default through the sysfs interface
+ * and then verifies that all the CPU specific DSCR defaults are updated as
+ * well verified from their sysfs interfaces.
+ *
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include "dscr.h"
+
+static int check_cpu_dscr_default(char *file, unsigned long val)
+{
+	char buf[10];
+	int fd, rc;
+
+	fd = open(file, O_RDWR);
+	if (fd == -1) {
+		perror("open() failed");
+		return 1;
+	}
+
+	rc = read(fd, buf, sizeof(buf));
+	if (rc == -1) {
+		perror("read() failed");
+		return 1;
+	}
+	close(fd);
+
+	buf[rc] = '\0';
+	if (strtol(buf, NULL, 16) != val) {
+		printf("DSCR match failed: %ld (system) %ld (cpu)\n",
+					val, strtol(buf, NULL, 16));
+		return 1;
+	}
+	return 0;
+}
+
+static int check_all_cpu_dscr_defaults(unsigned long val)
+{
+	DIR *sysfs;
+	struct dirent *dp;
+	char file[LEN_MAX];
+
+	sysfs = opendir(CPU_PATH);
+	if (!sysfs) {
+		perror("opendir() failed");
+		return 1;
+	}
+
+	while ((dp = readdir(sysfs))) {
+		if (!(dp->d_type & DT_DIR))
+			continue;
+		if (!strcmp(dp->d_name, "cpuidle"))
+			continue;
+		if (!strstr(dp->d_name, "cpu"))
+			continue;
+
+		sprintf(file, "%s%s/dscr", CPU_PATH, dp->d_name);
+		if (access(file, F_OK))
+			continue;
+
+		if (check_cpu_dscr_default(file, val))
+			return 1;
+	}
+	closedir(sysfs);
+	return 0;
+}
+
+int dscr_sysfs(void)
+{
+	unsigned long orig_dscr_default;
+	int i, j;
+
+	orig_dscr_default = get_default_dscr();
+	for (i = 0; i < COUNT; i++) {
+		for (j = 0; j < DSCR_MAX; j++) {
+			set_default_dscr(j);
+			if (check_all_cpu_dscr_defaults(j))
+				goto fail;
+		}
+	}
+	set_default_dscr(orig_dscr_default);
+	return 0;
+fail:
+	set_default_dscr(orig_dscr_default);
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(dscr_sysfs, "dscr_sysfs_test");
+}
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_sysfs_thread_test.c b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_thread_test.c
new file mode 100644
index 000000000000..ad97b592eccc
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_sysfs_thread_test.c
@@ -0,0 +1,80 @@
+/*
+ * POWER Data Stream Control Register (DSCR) sysfs thread test
+ *
+ * This test updates the system wide DSCR default value through
+ * sysfs interface which should then update all the CPU specific
+ * DSCR default values which must also be then visible to threads
+ * executing on individual CPUs on the system.
+ *
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#define _GNU_SOURCE
+#include "dscr.h"
+
+static int test_thread_dscr(unsigned long val)
+{
+	unsigned long cur_dscr, cur_dscr_usr;
+
+	cur_dscr = get_dscr();
+	cur_dscr_usr = get_dscr_usr();
+
+	if (val != cur_dscr) {
+		printf("[cpu %d] Kernel DSCR should be %ld but is %ld\n",
+					sched_getcpu(), val, cur_dscr);
+		return 1;
+	}
+
+	if (val != cur_dscr_usr) {
+		printf("[cpu %d] User DSCR should be %ld but is %ld\n",
+					sched_getcpu(), val, cur_dscr_usr);
+		return 1;
+	}
+	return 0;
+}
+
+static int check_cpu_dscr_thread(unsigned long val)
+{
+	cpu_set_t mask;
+	int cpu;
+
+	for (cpu = 0; cpu < CPU_SETSIZE; cpu++) {
+		CPU_ZERO(&mask);
+		CPU_SET(cpu, &mask);
+		if (sched_setaffinity(0, sizeof(mask), &mask))
+			continue;
+
+		if (test_thread_dscr(val))
+			return 1;
+	}
+	return 0;
+
+}
+
+int dscr_sysfs_thread(void)
+{
+	unsigned long orig_dscr_default;
+	int i, j;
+
+	orig_dscr_default = get_default_dscr();
+	for (i = 0; i < COUNT; i++) {
+		for (j = 0; j < DSCR_MAX; j++) {
+			set_default_dscr(j);
+			if (check_cpu_dscr_thread(j))
+				goto fail;
+		}
+	}
+	set_default_dscr(orig_dscr_default);
+	return 0;
+fail:
+	set_default_dscr(orig_dscr_default);
+	return 1;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(dscr_sysfs_thread, "dscr_sysfs_thread_test");
+}
diff --git a/tools/testing/selftests/powerpc/dscr/dscr_user_test.c b/tools/testing/selftests/powerpc/dscr/dscr_user_test.c
new file mode 100644
index 000000000000..77d16b5e7dca
--- /dev/null
+++ b/tools/testing/selftests/powerpc/dscr/dscr_user_test.c
@@ -0,0 +1,61 @@
+/*
+ * POWER Data Stream Control Register (DSCR) SPR test
+ *
+ * This test modifies the DSCR value through both the SPR number
+ * based mtspr instruction and then makes sure that the same is
+ * reflected through mfspr instruction using either of the SPR
+ * numbers.
+ *
+ * When using the privilege state SPR, the instructions such as
+ * mfspr or mtspr are priviledged and the kernel emulates them
+ * for us. Instructions using problem state SPR can be exuecuted
+ * directly without any emulation if the HW supports them. Else
+ * they also get emulated by the kernel.
+ *
+ * Copyright 2013, Anton Blanchard, IBM Corporation.
+ * Copyright 2015, Anshuman Khandual, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include "dscr.h"
+
+static int check_dscr(char *str)
+{
+	unsigned long cur_dscr, cur_dscr_usr;
+
+	cur_dscr = get_dscr();
+	cur_dscr_usr = get_dscr_usr();
+	if (cur_dscr != cur_dscr_usr) {
+		printf("%s set, kernel get %lx != user get %lx\n",
+					str, cur_dscr, cur_dscr_usr);
+		return 1;
+	}
+	return 0;
+}
+
+int dscr_user(void)
+{
+	int i;
+
+	check_dscr("");
+
+	for (i = 0; i < COUNT; i++) {
+		set_dscr(i);
+		if (check_dscr("kernel"))
+			return 1;
+	}
+
+	for (i = 0; i < COUNT; i++) {
+		set_dscr_usr(i);
+		if (check_dscr("user"))
+			return 1;
+	}
+	return 0;
+}
+
+int main(int argc, char *argv[])
+{
+	return test_harness(dscr_user, "dscr_user_test");
+}
diff --git a/tools/testing/selftests/powerpc/switch_endian/Makefile b/tools/testing/selftests/powerpc/switch_endian/Makefile
index 081473db22b7..e21d10674e54 100644
--- a/tools/testing/selftests/powerpc/switch_endian/Makefile
+++ b/tools/testing/selftests/powerpc/switch_endian/Makefile
@@ -1,9 +1,8 @@
-CC := $(CROSS_COMPILE)gcc
-PROGS := switch_endian_test
+TEST_PROGS := switch_endian_test
 
 ASFLAGS += -O2 -Wall -g -nostdlib -m64
 
-all: $(PROGS)
+all: $(TEST_PROGS)
 
 switch_endian_test: check-reversed.S
 
@@ -13,12 +12,7 @@ check-reversed.o: check.o
 check-reversed.S: check-reversed.o
 	hexdump -v -e '/1 ".byte 0x%02X\n"' $< > $@
 
-run_tests: all
-	@-for PROG in $(PROGS); do \
-		./$$PROG; \
-	done;
+include ../../lib.mk
 
 clean:
-	rm -f $(PROGS) *.o check-reversed.S
-
-.PHONY: all run_tests clean
+	rm -f $(TEST_PROGS) *.o check-reversed.S
diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile
index 6bff955e1d55..4bea62a319dc 100644
--- a/tools/testing/selftests/powerpc/tm/Makefile
+++ b/tools/testing/selftests/powerpc/tm/Makefile
@@ -1,11 +1,11 @@
-TEST_PROGS := tm-resched-dscr
+TEST_PROGS := tm-resched-dscr tm-syscall
 
 all: $(TEST_PROGS)
 
 $(TEST_PROGS): ../harness.c
 
 tm-syscall: tm-syscall-asm.S
-tm-syscall: CFLAGS += -mhtm
+tm-syscall: CFLAGS += -mhtm -I../../../../../usr/include
 
 include ../../lib.mk
 
diff --git a/tools/testing/selftests/powerpc/tm/tm-syscall.c b/tools/testing/selftests/powerpc/tm/tm-syscall.c
index 3ed8d4b252fa..1276e23da63b 100644
--- a/tools/testing/selftests/powerpc/tm/tm-syscall.c
+++ b/tools/testing/selftests/powerpc/tm/tm-syscall.c
@@ -82,7 +82,8 @@ int tm_syscall(void)
 	unsigned count = 0;
 	struct timeval end, now;
 
-	SKIP_IF(!((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_HTM));
+	SKIP_IF(!((long)get_auxv_entry(AT_HWCAP2)
+		  & PPC_FEATURE2_HTM_NOSC));
 	setbuf(stdout, NULL);
 
 	printf("Testing transactional syscalls for %d seconds...\n", TEST_DURATION);
diff --git a/tools/testing/selftests/powerpc/vphn/Makefile b/tools/testing/selftests/powerpc/vphn/Makefile
index e539f775fd8f..a485f2e286ae 100644
--- a/tools/testing/selftests/powerpc/vphn/Makefile
+++ b/tools/testing/selftests/powerpc/vphn/Makefile
@@ -1,15 +1,12 @@
-PROG := test-vphn
+TEST_PROGS := test-vphn
 
 CFLAGS += -m64
 
-all: $(PROG)
+all: $(TEST_PROGS)
 
-$(PROG): ../harness.c
+$(TEST_PROGS): ../harness.c
 
-run_tests: all
-	./$(PROG)
+include ../../lib.mk
 
 clean:
-	rm -f $(PROG)
-
-.PHONY: all run_tests clean
+	rm -f $(TEST_PROGS)