diff options
author | Samuel Mendoza-Jonas <sam@mendozajonas.com> | 2018-11-16 15:51:59 +1100 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2018-11-17 21:09:49 -0800 |
commit | 8d951a75d022d94a05f5fa74217670a981e8302d (patch) | |
tree | d360d9898e404a423779ba2b3ced1a5801515997 /net/ncsi/ncsi-manage.c | |
parent | 2878a2cfe57a5db21844801cf502fe535a3134b2 (diff) |
net/ncsi: Configure multi-package, multi-channel modes with failover
This patch extends the ncsi-netlink interface with two new commands and
three new attributes to configure multiple packages and/or channels at
once, and configure specific failover modes.
NCSI_CMD_SET_PACKAGE mask and NCSI_CMD_SET_CHANNEL_MASK set a whitelist
of packages or channels allowed to be configured with the
NCSI_ATTR_PACKAGE_MASK and NCSI_ATTR_CHANNEL_MASK attributes
respectively. If one of these whitelists is set only packages or
channels matching the whitelist are considered for the channel queue in
ncsi_choose_active_channel().
These commands may also use the NCSI_ATTR_MULTI_FLAG to signal that
multiple packages or channels may be configured simultaneously. NCSI
hardware arbitration (HWA) must be available in order to enable
multi-package mode. Multi-channel mode is always available.
If the NCSI_ATTR_CHANNEL_ID attribute is present in the
NCSI_CMD_SET_CHANNEL_MASK command the it sets the preferred channel as
with the NCSI_CMD_SET_INTERFACE command. The combination of preferred
channel and channel whitelist defines a primary channel and the allowed
failover channels.
If the NCSI_ATTR_MULTI_FLAG attribute is also present then the preferred
channel is configured for Tx/Rx and the other channels are enabled only
for Rx.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/ncsi/ncsi-manage.c')
-rw-r--r-- | net/ncsi/ncsi-manage.c | 264 |
1 files changed, 219 insertions, 45 deletions
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c index c814ce9bb3de..92e59f07f9a7 100644 --- a/net/ncsi/ncsi-manage.c +++ b/net/ncsi/ncsi-manage.c @@ -28,6 +28,29 @@ LIST_HEAD(ncsi_dev_list); DEFINE_SPINLOCK(ncsi_dev_lock); +bool ncsi_channel_has_link(struct ncsi_channel *channel) +{ + return !!(channel->modes[NCSI_MODE_LINK].data[2] & 0x1); +} + +bool ncsi_channel_is_last(struct ncsi_dev_priv *ndp, + struct ncsi_channel *channel) +{ + struct ncsi_package *np; + struct ncsi_channel *nc; + + NCSI_FOR_EACH_PACKAGE(ndp, np) + NCSI_FOR_EACH_CHANNEL(np, nc) { + if (nc == channel) + continue; + if (nc->state == NCSI_CHANNEL_ACTIVE && + ncsi_channel_has_link(nc)) + return false; + } + + return true; +} + static void ncsi_report_link(struct ncsi_dev_priv *ndp, bool force_down) { struct ncsi_dev *nd = &ndp->ndev; @@ -52,7 +75,7 @@ static void ncsi_report_link(struct ncsi_dev_priv *ndp, bool force_down) continue; } - if (nc->modes[NCSI_MODE_LINK].data[2] & 0x1) { + if (ncsi_channel_has_link(nc)) { spin_unlock_irqrestore(&nc->lock, flags); nd->link_up = 1; goto report; @@ -267,6 +290,7 @@ struct ncsi_package *ncsi_add_package(struct ncsi_dev_priv *ndp, np->ndp = ndp; spin_lock_init(&np->lock); INIT_LIST_HEAD(&np->channels); + np->channel_whitelist = UINT_MAX; spin_lock_irqsave(&ndp->lock, flags); tmp = ncsi_find_package(ndp, id); @@ -728,13 +752,144 @@ static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id) #endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */ +/* Determine if a given channel from the channel_queue should be used for Tx */ +static bool ncsi_channel_is_tx(struct ncsi_dev_priv *ndp, + struct ncsi_channel *nc) +{ + struct ncsi_channel_mode *ncm; + struct ncsi_channel *channel; + struct ncsi_package *np; + + /* Check if any other channel has Tx enabled; a channel may have already + * been configured and removed from the channel queue. + */ + NCSI_FOR_EACH_PACKAGE(ndp, np) { + if (!ndp->multi_package && np != nc->package) + continue; + NCSI_FOR_EACH_CHANNEL(np, channel) { + ncm = &channel->modes[NCSI_MODE_TX_ENABLE]; + if (ncm->enable) + return false; + } + } + + /* This channel is the preferred channel and has link */ + list_for_each_entry_rcu(channel, &ndp->channel_queue, link) { + np = channel->package; + if (np->preferred_channel && + ncsi_channel_has_link(np->preferred_channel)) { + return np->preferred_channel == nc; + } + } + + /* This channel has link */ + if (ncsi_channel_has_link(nc)) + return true; + + list_for_each_entry_rcu(channel, &ndp->channel_queue, link) + if (ncsi_channel_has_link(channel)) + return false; + + /* No other channel has link; default to this one */ + return true; +} + +/* Change the active Tx channel in a multi-channel setup */ +int ncsi_update_tx_channel(struct ncsi_dev_priv *ndp, + struct ncsi_package *package, + struct ncsi_channel *disable, + struct ncsi_channel *enable) +{ + struct ncsi_cmd_arg nca; + struct ncsi_channel *nc; + struct ncsi_package *np; + int ret = 0; + + if (!package->multi_channel && !ndp->multi_package) + netdev_warn(ndp->ndev.dev, + "NCSI: Trying to update Tx channel in single-channel mode\n"); + nca.ndp = ndp; + nca.req_flags = 0; + + /* Find current channel with Tx enabled */ + NCSI_FOR_EACH_PACKAGE(ndp, np) { + if (disable) + break; + if (!ndp->multi_package && np != package) + continue; + + NCSI_FOR_EACH_CHANNEL(np, nc) + if (nc->modes[NCSI_MODE_TX_ENABLE].enable) { + disable = nc; + break; + } + } + + /* Find a suitable channel for Tx */ + NCSI_FOR_EACH_PACKAGE(ndp, np) { + if (enable) + break; + if (!ndp->multi_package && np != package) + continue; + if (!(ndp->package_whitelist & (0x1 << np->id))) + continue; + + if (np->preferred_channel && + ncsi_channel_has_link(np->preferred_channel)) { + enable = np->preferred_channel; + break; + } + + NCSI_FOR_EACH_CHANNEL(np, nc) { + if (!(np->channel_whitelist & 0x1 << nc->id)) + continue; + if (nc->state != NCSI_CHANNEL_ACTIVE) + continue; + if (ncsi_channel_has_link(nc)) { + enable = nc; + break; + } + } + } + + if (disable == enable) + return -1; + + if (!enable) + return -1; + + if (disable) { + nca.channel = disable->id; + nca.package = disable->package->id; + nca.type = NCSI_PKT_CMD_DCNT; + ret = ncsi_xmit_cmd(&nca); + if (ret) + netdev_err(ndp->ndev.dev, + "Error %d sending DCNT\n", + ret); + } + + netdev_info(ndp->ndev.dev, "NCSI: channel %u enables Tx\n", enable->id); + + nca.channel = enable->id; + nca.package = enable->package->id; + nca.type = NCSI_PKT_CMD_ECNT; + ret = ncsi_xmit_cmd(&nca); + if (ret) + netdev_err(ndp->ndev.dev, + "Error %d sending ECNT\n", + ret); + + return ret; +} + static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) { - struct ncsi_dev *nd = &ndp->ndev; - struct net_device *dev = nd->dev; struct ncsi_package *np = ndp->active_package; struct ncsi_channel *nc = ndp->active_channel; struct ncsi_channel *hot_nc = NULL; + struct ncsi_dev *nd = &ndp->ndev; + struct net_device *dev = nd->dev; struct ncsi_cmd_arg nca; unsigned char index; unsigned long flags; @@ -856,20 +1011,29 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp) } else if (nd->state == ncsi_dev_state_config_ebf) { nca.type = NCSI_PKT_CMD_EBF; nca.dwords[0] = nc->caps[NCSI_CAP_BC].cap; - nd->state = ncsi_dev_state_config_ecnt; + if (ncsi_channel_is_tx(ndp, nc)) + nd->state = ncsi_dev_state_config_ecnt; + else + nd->state = ncsi_dev_state_config_ec; #if IS_ENABLED(CONFIG_IPV6) if (ndp->inet6_addr_num > 0 && (nc->caps[NCSI_CAP_GENERIC].cap & NCSI_CAP_GENERIC_MC)) nd->state = ncsi_dev_state_config_egmf; - else - nd->state = ncsi_dev_state_config_ecnt; } else if (nd->state == ncsi_dev_state_config_egmf) { nca.type = NCSI_PKT_CMD_EGMF; nca.dwords[0] = nc->caps[NCSI_CAP_MC].cap; - nd->state = ncsi_dev_state_config_ecnt; + if (ncsi_channel_is_tx(ndp, nc)) + nd->state = ncsi_dev_state_config_ecnt; + else + nd->state = ncsi_dev_state_config_ec; #endif /* CONFIG_IPV6 */ } else if (nd->state == ncsi_dev_state_config_ecnt) { + if (np->preferred_channel && + nc != np->preferred_channel) + netdev_info(ndp->ndev.dev, + "NCSI: Tx failed over to channel %u\n", + nc->id); nca.type = NCSI_PKT_CMD_ECNT; nd->state = ncsi_dev_state_config_ec; } else if (nd->state == ncsi_dev_state_config_ec) { @@ -959,43 +1123,35 @@ error: static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp) { - struct ncsi_package *np, *force_package; - struct ncsi_channel *nc, *found, *hot_nc, *force_channel; + struct ncsi_channel *nc, *found, *hot_nc; struct ncsi_channel_mode *ncm; - unsigned long flags; + unsigned long flags, cflags; + struct ncsi_package *np; + bool with_link; spin_lock_irqsave(&ndp->lock, flags); hot_nc = ndp->hot_channel; - force_channel = ndp->force_channel; - force_package = ndp->force_package; spin_unlock_irqrestore(&ndp->lock, flags); - /* Force a specific channel whether or not it has link if we have been - * configured to do so - */ - if (force_package && force_channel) { - found = force_channel; - ncm = &found->modes[NCSI_MODE_LINK]; - if (!(ncm->data[2] & 0x1)) - netdev_info(ndp->ndev.dev, - "NCSI: Channel %u forced, but it is link down\n", - found->id); - goto out; - } - - /* The search is done once an inactive channel with up - * link is found. + /* By default the search is done once an inactive channel with up + * link is found, unless a preferred channel is set. + * If multi_package or multi_channel are configured all channels in the + * whitelist are added to the channel queue. */ found = NULL; + with_link = false; NCSI_FOR_EACH_PACKAGE(ndp, np) { - if (ndp->force_package && np != ndp->force_package) + if (!(ndp->package_whitelist & (0x1 << np->id))) continue; NCSI_FOR_EACH_CHANNEL(np, nc) { - spin_lock_irqsave(&nc->lock, flags); + if (!(np->channel_whitelist & (0x1 << nc->id))) + continue; + + spin_lock_irqsave(&nc->lock, cflags); if (!list_empty(&nc->link) || nc->state != NCSI_CHANNEL_INACTIVE) { - spin_unlock_irqrestore(&nc->lock, flags); + spin_unlock_irqrestore(&nc->lock, cflags); continue; } @@ -1007,32 +1163,49 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp) ncm = &nc->modes[NCSI_MODE_LINK]; if (ncm->data[2] & 0x1) { - spin_unlock_irqrestore(&nc->lock, flags); found = nc; - goto out; + with_link = true; } - spin_unlock_irqrestore(&nc->lock, flags); + /* If multi_channel is enabled configure all valid + * channels whether or not they currently have link + * so they will have AENs enabled. + */ + if (with_link || np->multi_channel) { + spin_lock_irqsave(&ndp->lock, flags); + list_add_tail_rcu(&nc->link, + &ndp->channel_queue); + spin_unlock_irqrestore(&ndp->lock, flags); + + netdev_dbg(ndp->ndev.dev, + "NCSI: Channel %u added to queue (link %s)\n", + nc->id, + ncm->data[2] & 0x1 ? "up" : "down"); + } + + spin_unlock_irqrestore(&nc->lock, cflags); + + if (with_link && !np->multi_channel) + break; } + if (with_link && !ndp->multi_package) + break; } - if (!found) { + if (list_empty(&ndp->channel_queue) && found) { + netdev_info(ndp->ndev.dev, + "NCSI: No channel with link found, configuring channel %u\n", + found->id); + spin_lock_irqsave(&ndp->lock, flags); + list_add_tail_rcu(&found->link, &ndp->channel_queue); + spin_unlock_irqrestore(&ndp->lock, flags); + } else if (!found) { netdev_warn(ndp->ndev.dev, - "NCSI: No channel found with link\n"); + "NCSI: No channel found to configure!\n"); ncsi_report_link(ndp, true); return -ENODEV; } - ncm = &found->modes[NCSI_MODE_LINK]; - netdev_dbg(ndp->ndev.dev, - "NCSI: Channel %u added to queue (link %s)\n", - found->id, ncm->data[2] & 0x1 ? "up" : "down"); - -out: - spin_lock_irqsave(&ndp->lock, flags); - list_add_tail_rcu(&found->link, &ndp->channel_queue); - spin_unlock_irqrestore(&ndp->lock, flags); - return ncsi_process_next_channel(ndp); } @@ -1517,6 +1690,7 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev, INIT_LIST_HEAD(&ndp->channel_queue); INIT_LIST_HEAD(&ndp->vlan_vids); INIT_WORK(&ndp->work, ncsi_dev_work); + ndp->package_whitelist = UINT_MAX; /* Initialize private NCSI device */ spin_lock_init(&ndp->lock); |