trace: Add osnoise tracer

In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.

The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.

Usage

Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).

For example::

        [root@f32 ~]# cd /sys/kernel/tracing/
        [root@f32 tracing]# echo osnoise > current_tracer

It is possible to follow the trace by reading the trace trace file::

        [root@f32 tracing]# cat trace
        # tracer: osnoise
        #
        #                                _-----=> irqs-off
        #                               / _----=> need-resched
        #                              | / _---=> hardirq/softirq
        #                              || / _--=> preempt-depth                            MAX
        #                              || /                                             SINGLE     Interference counters:
        #                              ||||               RUNTIME      NOISE   % OF CPU  NOISE    +-----------------------------+
        #           TASK-PID      CPU# ||||   TIMESTAMP    IN US       IN US  AVAILABLE  IN US     HW    NMI    IRQ   SIRQ THREAD
        #              | |         |   ||||      |           |             |    |            |      |      |      |      |      |
                   <...>-859     [000] ....    81.637220: 1000000        190  99.98100       9     18      0   1007     18      1
                   <...>-860     [001] ....    81.638154: 1000000        656  99.93440      74     23      0   1006     16      3
                   <...>-861     [002] ....    81.638193: 1000000       5675  99.43250     202      6      0   1013     25     21
                   <...>-862     [003] ....    81.638242: 1000000        125  99.98750      45      1      0   1011     23      0
                   <...>-863     [004] ....    81.638260: 1000000       1721  99.82790     168      7      0   1002     49     41
                   <...>-864     [005] ....    81.638286: 1000000        263  99.97370      57      6      0   1006     26      2
                   <...>-865     [006] ....    81.638302: 1000000        109  99.98910      21      3      0   1006     18      1
                   <...>-866     [007] ....    81.638326: 1000000       7816  99.21840     107      8      0   1016     39     19

In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:

 - The RUNTIME IN USE reports the amount of time in microseconds that
   the osnoise thread kept looping reading the time.
 - The NOISE IN US reports the sum of noise in microseconds observed
   by the osnoise tracer during the associated runtime.
 - The % OF CPU AVAILABLE reports the percentage of CPU available for
   the osnoise thread during the runtime window.
 - The MAX SINGLE NOISE IN US reports the maximum single noise observed
   during the runtime window.
 - The Interference counters display how many each of the respective
   interference happened during the runtime window.

Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.

Tracer options

The tracer has a set of options inside the osnoise directory, they are:

 - osnoise/cpus: CPUs at which a osnoise thread will execute.
 - osnoise/period_us: the period of the osnoise thread.
 - osnoise/runtime_us: how long an osnoise thread will look for noise.
 - osnoise/stop_tracing_us: stop the system tracing if a single noise
   higher than the configured value happens. Writing 0 disables this
   option.
 - osnoise/stop_tracing_total_us: stop the system tracing if total noise
   higher than the configured value happens. Writing 0 disables this
   option.
 - tracing_threshold: the minimum delta between two time() reads to be
   considered as noise, in us. When set to 0, the default value will
   be used, which is currently 5 us.

Additional Tracing

In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.

 - osnoise:sample_threshold: printed anytime a noise is higher than
   the configurable tolerance_ns.
 - osnoise:nmi_noise: noise from NMI, including the duration.
 - osnoise:irq_noise: noise from an IRQ, including the duration.
 - osnoise:softirq_noise: noise from a SoftIRQ, including the
   duration.
 - osnoise:thread_noise: noise from a thread, including the duration.

Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.

Here is one example of the usage of these tracepoints::

       osnoise/8-961     [008] d.h.  5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
       osnoise/8-961     [008] dNh.  5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
     migration/8-54      [008] d...  5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
       osnoise/8-961     [008] ....  5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2

In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.

It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.

Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com

Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
  Made the following functions static:
   trace_irqentry_callback()
   trace_irqexit_callback()
   trace_intel_irqentry_callback()
   trace_intel_irqexit_callback()

  Added to include/trace.h:
   osnoise_arch_register()
   osnoise_arch_unregister()

  Fixed define logic for LATENCY_FS_NOTIFY

  Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

1 files changed, 71 insertions, 1 deletions

diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index d0368a569bfa..642b6584eba5 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -1202,7 +1202,6 @@ trace_hwlat_print(struct trace_iterator *iter, int flags,
 	return trace_handle_return(s);
 }
 
-
 static enum print_line_t
 trace_hwlat_raw(struct trace_iterator *iter, int flags,
 		struct trace_event *event)
@@ -1232,6 +1231,76 @@ static struct trace_event trace_hwlat_event = {
 	.funcs		= &trace_hwlat_funcs,
 };
 
+/* TRACE_OSNOISE */
+static enum print_line_t
+trace_osnoise_print(struct trace_iterator *iter, int flags,
+		    struct trace_event *event)
+{
+	struct trace_entry *entry = iter->ent;
+	struct trace_seq *s = &iter->seq;
+	struct osnoise_entry *field;
+	u64 ratio, ratio_dec;
+	u64 net_runtime;
+
+	trace_assign_type(field, entry);
+
+	/*
+	 * compute the available % of cpu time.
+	 */
+	net_runtime = field->runtime - field->noise;
+	ratio = net_runtime * 10000000;
+	do_div(ratio, field->runtime);
+	ratio_dec = do_div(ratio, 100000);
+
+	trace_seq_printf(s, "%llu %10llu %3llu.%05llu %7llu",
+			 field->runtime,
+			 field->noise,
+			 ratio, ratio_dec,
+			 field->max_sample);
+
+	trace_seq_printf(s, " %6u", field->hw_count);
+	trace_seq_printf(s, " %6u", field->nmi_count);
+	trace_seq_printf(s, " %6u", field->irq_count);
+	trace_seq_printf(s, " %6u", field->softirq_count);
+	trace_seq_printf(s, " %6u", field->thread_count);
+
+	trace_seq_putc(s, '\n');
+
+	return trace_handle_return(s);
+}
+
+static enum print_line_t
+trace_osnoise_raw(struct trace_iterator *iter, int flags,
+		  struct trace_event *event)
+{
+	struct osnoise_entry *field;
+	struct trace_seq *s = &iter->seq;
+
+	trace_assign_type(field, iter->ent);
+
+	trace_seq_printf(s, "%lld %llu %llu %u %u %u %u %u\n",
+			 field->runtime,
+			 field->noise,
+			 field->max_sample,
+			 field->hw_count,
+			 field->nmi_count,
+			 field->irq_count,
+			 field->softirq_count,
+			 field->thread_count);
+
+	return trace_handle_return(s);
+}
+
+static struct trace_event_functions trace_osnoise_funcs = {
+	.trace		= trace_osnoise_print,
+	.raw		= trace_osnoise_raw,
+};
+
+static struct trace_event trace_osnoise_event = {
+	.type		= TRACE_OSNOISE,
+	.funcs		= &trace_osnoise_funcs,
+};
+
 /* TRACE_BPUTS */
 static enum print_line_t
 trace_bputs_print(struct trace_iterator *iter, int flags,
@@ -1442,6 +1511,7 @@ static struct trace_event *events[] __initdata = {
 	&trace_bprint_event,
 	&trace_print_event,
 	&trace_hwlat_event,
+	&trace_osnoise_event,
 	&trace_raw_data_event,
 	&trace_func_repeats_event,
 	NULL