diff options
| author | Pekon Gupta <pekon@ti.com> | 2014-05-19 14:45:46 +0530 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2014-05-27 14:22:31 -0700 |
| commit | 99ffa6425f1b9ac39c5e9946c1c286f687b97c3e (patch) | |
| tree | acf10444f4b64f6ff73d3223a2e73aa7e20ca405 /kernel/Kconfig.freezer | |
| parent | 2e091d13e65d26f21159323b95b426e5bc42670c (diff) | |
ARM: dts: am437x-gp-evm: add support for parallel NAND flash
Adds pinmux and DT node for Micron (MT29F4G08AB) x8 NAND device present on
am437x-gp-evm board.
(1) As NAND Flash data lines are muxed with eMMC, Thus at a given time either
eMMC or NAND can be enabled. Selection between eMMC and NAND is controlled:
(a) By dynamically driving following GPIO pin from software
SPI2_CS0(GPIO) == 0 NAND is selected (default)
SPI2_CS0(GPIO) == 1 eMMC is selected
(b) By statically using Jumper (J89) on the board
(2) As NAND device connnected to this board has page-size=4K and oob-size=224,
So ROM code expects boot-loaders to be flashed in BCH16 ECC scheme for
NAND boot.
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'kernel/Kconfig.freezer')
0 files changed, 0 insertions, 0 deletions