Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

3 files changed, 62 insertions, 47 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9f90554e88c4..8c9ba44fb7cf 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2206,7 +2206,12 @@ struct cfg80211_qos_map {
  * @set_cqm_txe_config: Configure connection quality monitor TX error
  *	thresholds.
  * @sched_scan_start: Tell the driver to start a scheduled scan.
- * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This
+ *	call must stop the scheduled scan and be ready for starting a new one
+ *	before it returns, i.e. @sched_scan_start may be called immediately
+ *	after that again and should not fail in that case. The driver should
+ *	not call cfg80211_sched_scan_stopped() for a requested stop (when this
+ *	method returns 0.)
  *
  * @mgmt_frame_register: Notify driver that a management frame type was
  *	registered. Note that this callback may not sleep, and cannot run
@@ -2465,7 +2470,8 @@ struct cfg80211_ops {
 
 	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
 			     u8 *peer, u8 action_code,  u8 dialog_token,
-			     u16 status_code, const u8 *buf, size_t len);
+			     u16 status_code, u32 peer_capability,
+			     const u8 *buf, size_t len);
 	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
 			     u8 *peer, enum nl80211_tdls_operation oper);
 
@@ -2610,9 +2616,12 @@ struct ieee80211_iface_limit {
  *	only in special cases.
  * @radar_detect_widths: bitmap of channel widths supported for radar detection
  *
- * These examples can be expressed as follows:
+ * With this structure the driver can describe which interface
+ * combinations it supports concurrently.
  *
- * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ * Examples:
+ *
+ * 1. Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
  *
  *  struct ieee80211_iface_limit limits1[] = {
  *	{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
@@ -2626,7 +2635,7 @@ struct ieee80211_iface_limit {
  *  };
  *
  *
- * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
  *
  *  struct ieee80211_iface_limit limits2[] = {
  *	{ .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
@@ -2640,7 +2649,8 @@ struct ieee80211_iface_limit {
  *  };
  *
  *
- * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * 3. Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ *
  * This allows for an infrastructure connection and three P2P connections.
  *
  *  struct ieee80211_iface_limit limits3[] = {
@@ -2790,7 +2800,7 @@ struct wiphy_vendor_command {
  * @perm_addr: permanent MAC address of this device
  * @addr_mask: If the device supports multiple MAC addresses by masking,
  *	set this to a mask with variable bits set to 1, e.g. if the last
- *	four bits are variable then set it to 00:...:00:0f. The actual
+ *	four bits are variable then set it to 00-00-00-00-00-0f. The actual
  *	variable bits shall be determined by the interfaces added, with
  *	interfaces not matching the mask being rejected to be brought up.
  * @n_addresses: number of addresses in @addresses.
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4f0f29dce0aa..86faa413b37d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -66,10 +66,6 @@
  *
  * Secondly, when the hardware handles fragmentation, the frame handed to
  * the driver from mac80211 is the MSDU, not the MPDU.
- *
- * Finally, for received frames, the driver is able to indicate that it has
- * filled a radiotap header and put that in front of the frame; if it does
- * not do so then mac80211 may add this under certain circumstances.
  */
 
 /**
@@ -1507,8 +1503,6 @@ struct ieee80211_tx_control {
  * @IEEE80211_HW_CONNECTION_MONITOR:
  *	The hardware performs its own connection monitoring, including
  *	periodic keep-alives to the AP and probing the AP on beacon loss.
- *	When this flag is set, signaling beacon-loss will cause an immediate
- *	change to disassociated state.
  *
  * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC:
  *	This device needs to get data from beacon before association (i.e.
@@ -1644,10 +1638,6 @@ enum ieee80211_hw_flags {
  *	the hw can report back.
  * @max_rate_tries: maximum number of tries for each stage
  *
- * @napi_weight: weight used for NAPI polling.  You must specify an
- *	appropriate value here if a napi_poll operation is provided
- *	by your driver.
- *
  * @max_rx_aggregation_subframes: maximum buffer size (number of
  *	sub-frames) to be used for A-MPDU block ack receiver
  *	aggregation.
@@ -1701,7 +1691,6 @@ struct ieee80211_hw {
 	int vif_data_size;
 	int sta_data_size;
 	int chanctx_data_size;
-	int napi_weight;
 	u16 queues;
 	u16 max_listen_interval;
 	s8 max_signal;
@@ -2471,6 +2460,7 @@ enum ieee80211_roc_type {
  *	This process will continue until sched_scan_stop is called.
  *
  * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ *	In this case, ieee80211_sched_scan_stopped() must not be called.
  *
  * @sw_scan_start: Notifier function that is called just before a software scan
  *	is started. Can be NULL, if the driver doesn't need this notification.
@@ -2624,8 +2614,6 @@ enum ieee80211_roc_type {
  *	callback. They must then call ieee80211_chswitch_done() to indicate
  *	completion of the channel switch.
  *
- * @napi_poll: Poll Rx queue for incoming data frames.
- *
  * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
  *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
  *	reject TX/RX mask combinations they cannot support by returning -EINVAL
@@ -2820,7 +2808,7 @@ struct ieee80211_ops {
 				struct ieee80211_vif *vif,
 				struct cfg80211_sched_scan_request *req,
 				struct ieee80211_sched_scan_ies *ies);
-	void (*sched_scan_stop)(struct ieee80211_hw *hw,
+	int (*sched_scan_stop)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif);
 	void (*sw_scan_start)(struct ieee80211_hw *hw);
 	void (*sw_scan_complete)(struct ieee80211_hw *hw);
@@ -2884,7 +2872,6 @@ struct ieee80211_ops {
 	void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
-	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
 	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
 	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
 
@@ -3166,21 +3153,21 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
  */
 void ieee80211_restart_hw(struct ieee80211_hw *hw);
 
-/** ieee80211_napi_schedule - schedule NAPI poll
- *
- * Use this function to schedule NAPI polling on a device.
- *
- * @hw: the hardware to start polling
- */
-void ieee80211_napi_schedule(struct ieee80211_hw *hw);
-
-/** ieee80211_napi_complete - complete NAPI polling
- *
- * Use this function to finish NAPI polling on a device.
+/**
+ * ieee80211_napi_add - initialize mac80211 NAPI context
+ * @hw: the hardware to initialize the NAPI context on
+ * @napi: the NAPI context to initialize
+ * @napi_dev: dummy NAPI netdevice, here to not waste the space if the
+ *	driver doesn't use NAPI
+ * @poll: poll function
+ * @weight: default weight
  *
- * @hw: the hardware to stop polling
+ * See also netif_napi_add().
  */
-void ieee80211_napi_complete(struct ieee80211_hw *hw);
+void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
+			struct net_device *napi_dev,
+			int (*poll)(struct napi_struct *, int),
+			int weight);
 
 /**
  * ieee80211_rx - receive frame
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index a12e6cae5132..ff72cab3cd3a 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -303,8 +303,9 @@
  *	passed, all channels allowed for the current regulatory domain
  *	are used.  Extra IEs can also be passed from the userspace by
  *	using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan.  Returns -ENOENT
- *	if scheduled scan is not running.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ *	scheduled scan is not running. The caller may assume that as soon
+ *	as the call returns, it is safe to start a new scheduled scan again.
  * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
  *	results available.
  * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
@@ -1575,6 +1576,9 @@ enum nl80211_commands {
  *	advertise values that cannot always be met. In such cases, an attempt
  *	to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
  *
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ *	As specified in the &enum nl80211_tdls_peer_capability.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1908,6 +1912,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MAX_AP_ASSOC_STA,
 
+	NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2437,10 +2443,7 @@ enum nl80211_reg_type {
  * 	in KHz. This is not a center a frequency but an actual regulatory
  * 	band edge.
  * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- *	frequency range, in KHz. If not present or 0, maximum available
- *	bandwidth should be calculated base on contiguous rules and wider
- *	channels will be allowed to cross multiple contiguous/overlapping
- *	frequency ranges.
+ *	frequency range, in KHz.
  * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
  * 	for a given frequency range. The value is in mBi (100 * dBi).
  * 	If you don't have one then don't send this.
@@ -2511,6 +2514,9 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
  * 	this includes probe requests or modes of operation that require
  * 	beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ *	base on contiguous rules and wider channels will be allowed to cross
+ *	multiple contiguous/overlapping frequency ranges.
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -2522,6 +2528,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_PTMP_ONLY		= 1<<6,
 	NL80211_RRF_NO_IR		= 1<<7,
 	__NL80211_RRF_NO_IBSS		= 1<<8,
+	NL80211_RRF_AUTO_BW		= 1<<11,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -3843,11 +3850,6 @@ enum nl80211_ap_sme_features {
  * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
  *	to work properly to suppport receiving regulatory hints from
  *	cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- *	P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- *	in the interface combinations, even when it's only used for scan
- *	and remain-on-channel. This could be due to, for example, the
- *	remain-on-channel implementation requiring a channel context.
  * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
  *	equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
  *	mode
@@ -3889,7 +3891,7 @@ enum nl80211_feature_flags {
 	NL80211_FEATURE_HT_IBSS				= 1 << 1,
 	NL80211_FEATURE_INACTIVITY_TIMER		= 1 << 2,
 	NL80211_FEATURE_CELL_BASE_REG_HINTS		= 1 << 3,
-	NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL	= 1 << 4,
+	/* bit 4 is reserved - don't use */
 	NL80211_FEATURE_SAE				= 1 << 5,
 	NL80211_FEATURE_LOW_PRIORITY_SCAN		= 1 << 6,
 	NL80211_FEATURE_SCAN_FLUSH			= 1 << 7,
@@ -4079,4 +4081,20 @@ struct nl80211_vendor_cmd_info {
 	__u32 subcmd;
 };
 
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+	NL80211_TDLS_PEER_HT = 1<<0,
+	NL80211_TDLS_PEER_VHT = 1<<1,
+	NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
 #endif /* __LINUX_NL80211_H */