Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: add defconfig for Freescale MPC8349E-mITX board
  powerpc: Add base support for the Freescale MPC8349E-mITX eval board
  Documentation: correct values in MPC8548E SEC example node
  [POWERPC] Actually copy over i8259.c to arch/ppc/syslib this time
  [POWERPC] Add new interrupt mapping core and change platforms to use it
  [POWERPC] Copy i8259 code back to arch/ppc
  [POWERPC] New device-tree interrupt parsing code
  [POWERPC] Use the genirq framework
  [PATCH] genirq: Allow fasteoi handler to retrigger disabled interrupts
  [POWERPC] Update the SWIM3 (powermac) floppy driver
  [POWERPC] Fix error handling in detecting legacy serial ports
  [POWERPC] Fix booting on Momentum "Apache" board (a Maple derivative)
  [POWERPC] Fix various offb and BootX-related issues
  [POWERPC] Add a default config for 32-bit CHRP machines
  [POWERPC] fix implicit declaration on cell.
  [POWERPC] change get_property to return void *

6 files changed, 436 insertions, 98 deletions

diff --git a/include/asm-powerpc/i8259.h b/include/asm-powerpc/i8259.h
index 0392159e16e4..c80e113052cd 100644
--- a/include/asm-powerpc/i8259.h
+++ b/include/asm-powerpc/i8259.h
@@ -4,11 +4,13 @@
 
 #include <linux/irq.h>
 
-extern struct hw_interrupt_type i8259_pic;
-
+#ifdef CONFIG_PPC_MERGE
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(struct pt_regs *regs);
+#else
 extern void i8259_init(unsigned long intack_addr, int offset);
 extern int i8259_irq(struct pt_regs *regs);
-extern int i8259_irq_cascade(struct pt_regs *regs, void *unused);
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_I8259_H */
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index eb5f33e1977a..e05754752028 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -9,26 +9,14 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/config.h>
 #include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
 
 #include <asm/types.h>
 #include <asm/atomic.h>
 
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ			(-1)
-
-/*
- * These constants are used for passing information about interrupt
- * signal polarity and level/edge sensing to the low-level PIC chip
- * drivers.
- */
-#define IRQ_SENSE_MASK		0x1
-#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
-#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
-
-#define IRQ_POLARITY_MASK	0x2
-#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
-#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
 
 #define get_irq_desc(irq) (&irq_desc[(irq)])
 
@@ -36,50 +24,325 @@
 #define for_each_irq(i) \
 	for ((i) = 0; (i) < NR_IRQS; ++(i))
 
-#ifdef CONFIG_PPC64
+extern atomic_t ppc_n_lost_interrupts;
 
-/*
- * Maximum number of interrupt sources that we can handle.
+#ifdef CONFIG_PPC_MERGE
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
  */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
 #define NR_IRQS		512
 
-/* Interrupt numbers are virtual in case they are sparsely
- * distributed by the hardware.
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
  */
-extern unsigned int virt_irq_to_real_map[NR_IRQS];
+struct irq_host;
+struct radix_tree_root;
 
-/* The maximum virtual IRQ number that we support.  This
- * can be set by the platform and will be reduced by the
- * value of __irq_offset_value.  It defaults to and is
- * capped by (NR_IRQS - 1).
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
  */
-extern unsigned int virt_irq_max;
+struct irq_host_ops {
+	/* Match an interrupt controller device node to a host, returns
+	 * 1 on a match
+	 */
+	int (*match)(struct irq_host *h, struct device_node *node);
+
+	/* Create or update a mapping between a virtual irq number and a hw
+	 * irq number. This can be called several times for the same mapping
+	 * but with different flags, though unmap shall always be called
+	 * before the virq->hw mapping is changed.
+	 */
+	int (*map)(struct irq_host *h, unsigned int virq,
+		   irq_hw_number_t hw, unsigned int flags);
+
+	/* Dispose of such a mapping */
+	void (*unmap)(struct irq_host *h, unsigned int virq);
+
+	/* Translate device-tree interrupt specifier from raw format coming
+	 * from the firmware to a irq_hw_number_t (interrupt line number) and
+	 * trigger flags that can be passed to irq_create_mapping().
+	 * If no translation is provided, raw format is assumed to be one cell
+	 * for interrupt line and default sense.
+	 */
+	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+		     u32 *intspec, unsigned int intsize,
+		     irq_hw_number_t *out_hwirq, unsigned int *out_flags);
+};
+
+struct irq_host {
+	struct list_head	link;
+
+	/* type of reverse mapping technique */
+	unsigned int		revmap_type;
+#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE	3 /* radix tree */
+	union {
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct radix_tree_root tree;
+	} revmap_data;
+	struct irq_host_ops	*ops;
+	void			*host_data;
+	irq_hw_number_t		inval_irq;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
 
-/* Create a mapping for a real_irq if it doesn't already exist.
- * Return the virtual irq as a convenience.
+/***
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @node: device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(unsigned int revmap_type,
+				       unsigned int revmap_arg,
+				       struct irq_host_ops *ops,
+				       irq_hw_number_t inval_irq);
+
+
+/***
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/***
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/***
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/***
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ * @flags: flags passed to the controller. contains the trigger type among
+ *         others. Use IRQ_TYPE_* defined in include/linux/irq.h
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number. The flags can be used to provide sense information to the
+ * controller (typically extracted from the device-tree). If no information
+ * is passed, the controller defaults will apply (for example, xics can only
+ * do edge so flags are irrelevant for some pseries specific irqs).
+ *
+ * The device-tree generally contains the trigger info in an encoding that is
+ * specific to a given type of controller. In that case, you can directly use
+ * host->ops->trigger_xlate() to translate that.
+ *
+ * It is recommended that new PICs that don't have existing OF bindings chose
+ * to use a representation of triggers identical to linux.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+				       irq_hw_number_t hwirq,
+				       unsigned int flags);
+
+
+/***
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/***
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
  */
-int virt_irq_create_mapping(unsigned int real_irq);
-void virt_irq_init(void);
+extern unsigned int irq_find_mapping(struct irq_host *host,
+				     irq_hw_number_t hwirq);
 
-static inline unsigned int virt_irq_to_real(unsigned int virt_irq)
+
+/***
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/***
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+				      irq_hw_number_t hwirq);
+
+
+
+/***
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+				   unsigned int count,
+				   unsigned int hint);
+
+/***
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/***
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
 {
-	return virt_irq_to_real_map[virt_irq];
+	return irq;
 }
 
-extern unsigned int real_irq_to_virt_slowpath(unsigned int real_irq);
+
+#else /* CONFIG_PPC_MERGE */
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(-1)
+#define NO_IRQ_IGNORE		(-2)
+
 
 /*
- * List of interrupt controllers.
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
  */
-#define IC_INVALID    0
-#define IC_OPEN_PIC   1
-#define IC_PPC_XIC    2
-#define IC_CELL_PIC   3
-#define IC_ISERIES    4
+#define IRQ_SENSE_MASK		0x1
+#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
+#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
 
-extern u64 ppc64_interrupt_controller;
+#define IRQ_POLARITY_MASK	0x2
+#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
 
-#else /* 32-bit */
 
 #if defined(CONFIG_40x)
 #include <asm/ibm4xx.h>
@@ -512,16 +775,11 @@ extern u64 ppc64_interrupt_controller;
 
 #endif /* CONFIG_8260 */
 
-#endif
+#endif /* Whatever way too big #ifdef */
 
 #define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
 /* pedantic: these are long because they are used with set_bit --RR */
 extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-extern atomic_t ppc_n_lost_interrupts;
-
-#define virt_irq_create_mapping(x)	(x)
-
-#endif
 
 /*
  * Because many systems have two overlapping names spaces for
@@ -560,6 +818,7 @@ static __inline__ int irq_canonicalize(int irq)
 		irq = 9;
 	return irq;
 }
+#endif /* CONFIG_PPC_MERGE */
 
 extern int distribute_irqs;
 
@@ -579,9 +838,8 @@ extern struct thread_info *softirq_ctx[NR_CPUS];
 
 extern void irq_ctx_init(void);
 extern void call_do_softirq(struct thread_info *tp);
-extern int call___do_IRQ(int irq, struct pt_regs *regs,
-		struct thread_info *tp);
-
+extern int call_handle_irq(int irq, void *p1, void *p2,
+			   struct thread_info *tp, void *func);
 #else
 #define irq_ctx_init()
 
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index eba133d149a7..c17c13742401 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -97,7 +97,7 @@ struct machdep_calls {
 	void		(*show_percpuinfo)(struct seq_file *m, int i);
 
 	void		(*init_IRQ)(void);
-	int		(*get_irq)(struct pt_regs *);
+	unsigned int	(*get_irq)(struct pt_regs *);
 #ifdef CONFIG_KEXEC
 	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
 #endif
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index f0d22ac34b96..eb241c99c457 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -114,9 +114,6 @@
 #define MPIC_VEC_TIMER_1	248
 #define MPIC_VEC_TIMER_0	247
 
-/* Type definition of the cascade handler */
-typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
-
 #ifdef CONFIG_MPIC_BROKEN_U3
 /* Fixup table entry */
 struct mpic_irq_fixup
@@ -132,10 +129,19 @@ struct mpic_irq_fixup
 /* The instance data of a given MPIC */
 struct mpic
 {
+	/* The device node of the interrupt controller */
+	struct device_node	*of_node;
+
+	/* The remapper for this MPIC */
+	struct irq_host		*irqhost;
+
 	/* The "linux" controller struct */
-	hw_irq_controller	hc_irq;
+	struct irq_chip		hc_irq;
+#ifdef CONFIG_MPIC_BROKEN_U3
+	struct irq_chip		hc_ht_irq;
+#endif
 #ifdef CONFIG_SMP
-	hw_irq_controller	hc_ipi;
+	struct irq_chip		hc_ipi;
 #endif
 	const char		*name;
 	/* Flags */
@@ -144,20 +150,12 @@ struct mpic
 	unsigned int		isu_size;
 	unsigned int		isu_shift;
 	unsigned int		isu_mask;
-	/* Offset of irq vector numbers */
-	unsigned int		irq_offset;	
 	unsigned int		irq_count;
-	/* Offset of ipi vector numbers */
-	unsigned int		ipi_offset;
 	/* Number of sources */
 	unsigned int		num_sources;
 	/* Number of CPUs */
 	unsigned int		num_cpus;
-	/* cascade handler */
-	mpic_cascade_t		cascade;
-	void			*cascade_data;
-	unsigned int		cascade_vec;
-	/* senses array */
+	/* default senses array */
 	unsigned char		*senses;
 	unsigned int		senses_count;
 
@@ -213,14 +211,11 @@ struct mpic
  * The values in the array start at the first source of the MPIC,
  * that is senses[0] correspond to linux irq "irq_offset".
  */
-extern struct mpic *mpic_alloc(unsigned long phys_addr,
+extern struct mpic *mpic_alloc(struct device_node *node,
+			       unsigned long phys_addr,
 			       unsigned int flags,
 			       unsigned int isu_size,
-			       unsigned int irq_offset,
 			       unsigned int irq_count,
-			       unsigned int ipi_offset,
-			       unsigned char *senses,
-			       unsigned int senses_num,
 			       const char *name);
 
 /* Assign ISUs, to call before mpic_init()
@@ -232,22 +227,27 @@ extern struct mpic *mpic_alloc(unsigned long phys_addr,
 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 			    unsigned long phys_addr);
 
+/* Set default sense codes
+ *
+ * @mpic:	controller
+ * @senses:	array of sense codes
+ * @count:	size of above array
+ *
+ * Optionally provide an array (indexed on hardware interrupt numbers
+ * for this MPIC) of default sense codes for the chip. Those are linux
+ * sense codes IRQ_TYPE_*
+ *
+ * The driver gets ownership of the pointer, don't dispose of it or
+ * anything like that. __init only.
+ */
+extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
+
+
 /* Initialize the controller. After this has been called, none of the above
  * should be called again for this mpic
  */
 extern void mpic_init(struct mpic *mpic);
 
-/* Setup a cascade. Currently, only one cascade is supported this
- * way, though you can always do a normal request_irq() and add
- * other cascades this way. You should call this _after_ having
- * added all the ISUs
- *
- * @irq_no:	"linux" irq number of the cascade (that is offset'ed vector)
- * @handler:	cascade handler function
- */
-extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
-			       void *data);
-
 /*
  * All of the following functions must only be used after the
  * ISUs have been assigned and the controller fully initialized
@@ -284,9 +284,9 @@ extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
 void smp_mpic_message_pass(int target, int msg);
 
 /* Fetch interrupt from a given mpic */
-extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
+extern unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
 /* This one gets to the primary mpic */
-extern int mpic_get_irq(struct pt_regs *regs);
+extern unsigned int mpic_get_irq(struct pt_regs *regs);
 
 /* Set the EPIC clock ratio */
 void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
@@ -294,8 +294,5 @@ void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
 /* Enable/Disable EPIC serial interrupt mode */
 void mpic_set_serial_int(struct mpic *mpic, int enable);
 
-/* global mpic for pSeries */
-extern struct mpic *pSeries_mpic;
-
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MPIC_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 010d186d095b..b095a285c84b 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -64,11 +64,6 @@ struct boot_param_header
 typedef u32 phandle;
 typedef u32 ihandle;
 
-struct interrupt_info {
-	int	line;
-	int	sense;		/* +ve/-ve logic, edge or level, etc. */
-};
-
 struct property {
 	char	*name;
 	int	length;
@@ -81,8 +76,6 @@ struct device_node {
 	char	*type;
 	phandle	node;
 	phandle linux_phandle;
-	int	n_intrs;
-	struct	interrupt_info *intrs;
 	char	*full_name;
 
 	struct	property *properties;
@@ -167,8 +160,8 @@ extern void unflatten_device_tree(void);
 extern void early_init_devtree(void *);
 extern int device_is_compatible(struct device_node *device, const char *);
 extern int machine_is_compatible(const char *compat);
-extern unsigned char *get_property(struct device_node *node, const char *name,
-				   int *lenp);
+extern void *get_property(struct device_node *node, const char *name,
+		int *lenp);
 extern void print_properties(struct device_node *node);
 extern int prom_n_addr_cells(struct device_node* np);
 extern int prom_n_size_cells(struct device_node* np);
@@ -204,6 +197,15 @@ extern int release_OF_resource(struct device_node* node, int index);
  */
 
 
+/* Helper to read a big number */
+static inline u64 of_read_number(u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
 /* Translate an OF address block into a CPU physical address
  */
 #define OF_BAD_ADDR	((u64)-1)
@@ -240,5 +242,83 @@ extern void kdump_move_device_tree(void);
 /* CPU OF node matching */
 struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+	struct device_node *controller;	/* Interrupt controller node */
+	u32 size;			/* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
+};
+
+/***
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags:	flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/***
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:	the device interrupt parent
+ * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @addr:	address specifier (start of "reg" property of the device)
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 *addr,
+			  struct of_irq *out_irq);
+
+
+/***
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device:	the device whose interrupt is to be resolved
+ * @index:     	index of the interrupt to resolve
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+
+/***
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:	the device whose interrupt is to be resolved
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 9609d3ee8798..c02d105d8294 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -117,6 +117,7 @@ struct spu {
 	struct list_head sched_list;
 	int number;
 	int nid;
+	unsigned int irqs[3];
 	u32 isrc;
 	u32 node;
 	u64 flags;