Merge tag 'linux-can-next-for-5.10-20201007' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
linux-can-next-for-5.10-20201007

The first 3 patches are by me and fix several warnings found
when compiling the  kernel with W=1.

Lukas Bulwahn's patch adjusts the MAINTAINERS file, to accommodate
the renaming of the mcp251xfd driver.

Vincent Mailhol contributes 3 patches for the CAN networking layer.
First error queue support is added the the CAN RAW protocol.
The second patch converts the get_can_dlc() and get_canfd_dlc()
in-Kernel-only macros from using __u8 to u8.
The third patch adds a helper function to calculate the length of
one bit in in multiple of time quanta.

Oliver Hartkopp's patch add support for the ISO 15765-2:2016
transport protocol to the CAN stack.

Three patches by Lad Prabhakar add documentation for various
new rcar controllers to the device tree bindings of the rcar_can
and rcan_canfd driver.

Michael Walle's patch adds various processors to the flexcan
driver binding documentation.

The next two patches are by me and target the flexcan driver aswell.
The remove the ack_grp and ack_bit from the fsl,stop-mode DT property
and the driver, as they are not used anymore. As these are the last
two arguments this change will not break existing device trees.

The last three patches are by Srinivas Neeli and target
the xilinx_can driver.
The first one increases the lower limit for the bit rate
prescaler to 2, the other two fix sparse and coverity findings.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

3 files changed, 187 insertions, 3 deletions

diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index ed0482b2f4b2..41ff31795320 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -82,15 +82,30 @@ struct can_priv {
 #endif
 };
 
+#define CAN_SYNC_SEG 1
+
+/*
+ * can_bit_time() - Duration of one bit
+ *
+ * Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for
+ * additional information.
+ *
+ * Return: the number of time quanta in one bit.
+ */
+static inline unsigned int can_bit_time(const struct can_bittiming *bt)
+{
+	return CAN_SYNC_SEG + bt->prop_seg + bt->phase_seg1 + bt->phase_seg2;
+}
+
 /*
  * get_can_dlc(value) - helper macro to cast a given data length code (dlc)
- * to __u8 and ensure the dlc value to be max. 8 bytes.
+ * to u8 and ensure the dlc value to be max. 8 bytes.
  *
  * To be used in the CAN netdriver receive path to ensure conformance with
  * ISO 11898-1 Chapter 8.4.2.3 (DLC field)
  */
-#define get_can_dlc(i)		(min_t(__u8, (i), CAN_MAX_DLC))
-#define get_canfd_dlc(i)	(min_t(__u8, (i), CANFD_MAX_DLC))
+#define get_can_dlc(i)		(min_t(u8, (i), CAN_MAX_DLC))
+#define get_canfd_dlc(i)	(min_t(u8, (i), CANFD_MAX_DLC))
 
 /* Check for outgoing skbs that have not been created by the CAN subsystem */
 static inline bool can_skb_headroom_valid(struct net_device *dev,
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
new file mode 100644
index 000000000000..553006509f4e
--- /dev/null
+++ b/include/uapi/linux/can/isotp.h
@@ -0,0 +1,166 @@
+/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * linux/can/isotp.h
+ *
+ * Definitions for isotp CAN sockets (ISO 15765-2:2016)
+ *
+ * Copyright (c) 2020 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ */
+
+#ifndef _UAPI_CAN_ISOTP_H
+#define _UAPI_CAN_ISOTP_H
+
+#include <linux/types.h>
+#include <linux/can.h>
+
+#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)
+
+/* for socket options affecting the socket (not the global system) */
+
+#define CAN_ISOTP_OPTS		1	/* pass struct can_isotp_options */
+
+#define CAN_ISOTP_RECV_FC	2	/* pass struct can_isotp_fc_options */
+
+/* sockopts to force stmin timer values for protocol regression tests */
+
+#define CAN_ISOTP_TX_STMIN	3	/* pass __u32 value in nano secs    */
+					/* use this time instead of value   */
+					/* provided in FC from the receiver */
+
+#define CAN_ISOTP_RX_STMIN	4	/* pass __u32 value in nano secs   */
+					/* ignore received CF frames which */
+					/* timestamps differ less than val */
+
+#define CAN_ISOTP_LL_OPTS	5	/* pass struct can_isotp_ll_options */
+
+struct can_isotp_options {
+
+	__u32 flags;		/* set flags for isotp behaviour.	*/
+				/* __u32 value : flags see below	*/
+
+	__u32 frame_txtime;	/* frame transmission time (N_As/N_Ar)	*/
+				/* __u32 value : time in nano secs	*/
+
+	__u8  ext_address;	/* set address for extended addressing	*/
+				/* __u8 value : extended address	*/
+
+	__u8  txpad_content;	/* set content of padding byte (tx)	*/
+				/* __u8 value : content	on tx path	*/
+
+	__u8  rxpad_content;	/* set content of padding byte (rx)	*/
+				/* __u8 value : content	on rx path	*/
+
+	__u8  rx_ext_address;	/* set address for extended addressing	*/
+				/* __u8 value : extended address (rx)	*/
+};
+
+struct can_isotp_fc_options {
+
+	__u8  bs;		/* blocksize provided in FC frame	*/
+				/* __u8 value : blocksize. 0 = off	*/
+
+	__u8  stmin;		/* separation time provided in FC frame	*/
+				/* __u8 value :				*/
+				/* 0x00 - 0x7F : 0 - 127 ms		*/
+				/* 0x80 - 0xF0 : reserved		*/
+				/* 0xF1 - 0xF9 : 100 us - 900 us	*/
+				/* 0xFA - 0xFF : reserved		*/
+
+	__u8  wftmax;		/* max. number of wait frame transmiss.	*/
+				/* __u8 value : 0 = omit FC N_PDU WT	*/
+};
+
+struct can_isotp_ll_options {
+
+	__u8  mtu;		/* generated & accepted CAN frame type	*/
+				/* __u8 value :				*/
+				/* CAN_MTU   (16) -> standard CAN 2.0	*/
+				/* CANFD_MTU (72) -> CAN FD frame	*/
+
+	__u8  tx_dl;		/* tx link layer data length in bytes	*/
+				/* (configured maximum payload length)	*/
+				/* __u8 value : 8,12,16,20,24,32,48,64	*/
+				/* => rx path supports all LL_DL values */
+
+	__u8  tx_flags;		/* set into struct canfd_frame.flags	*/
+				/* at frame creation: e.g. CANFD_BRS	*/
+				/* Obsolete when the BRS flag is fixed	*/
+				/* by the CAN netdriver configuration	*/
+};
+
+/* flags for isotp behaviour */
+
+#define CAN_ISOTP_LISTEN_MODE	0x001	/* listen only (do not send FC) */
+#define CAN_ISOTP_EXTEND_ADDR	0x002	/* enable extended addressing */
+#define CAN_ISOTP_TX_PADDING	0x004	/* enable CAN frame padding tx path */
+#define CAN_ISOTP_RX_PADDING	0x008	/* enable CAN frame padding rx path */
+#define CAN_ISOTP_CHK_PAD_LEN	0x010	/* check received CAN frame padding */
+#define CAN_ISOTP_CHK_PAD_DATA	0x020	/* check received CAN frame padding */
+#define CAN_ISOTP_HALF_DUPLEX	0x040	/* half duplex error state handling */
+#define CAN_ISOTP_FORCE_TXSTMIN	0x080	/* ignore stmin from received FC */
+#define CAN_ISOTP_FORCE_RXSTMIN	0x100	/* ignore CFs depending on rx stmin */
+#define CAN_ISOTP_RX_EXT_ADDR	0x200	/* different rx extended addressing */
+#define CAN_ISOTP_WAIT_TX_DONE	0x400	/* wait for tx completion */
+
+
+/* default values */
+
+#define CAN_ISOTP_DEFAULT_FLAGS		0
+#define CAN_ISOTP_DEFAULT_EXT_ADDRESS	0x00
+#define CAN_ISOTP_DEFAULT_PAD_CONTENT	0xCC /* prevent bit-stuffing */
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME	0
+#define CAN_ISOTP_DEFAULT_RECV_BS	0
+#define CAN_ISOTP_DEFAULT_RECV_STMIN	0x00
+#define CAN_ISOTP_DEFAULT_RECV_WFTMAX	0
+
+#define CAN_ISOTP_DEFAULT_LL_MTU	CAN_MTU
+#define CAN_ISOTP_DEFAULT_LL_TX_DL	CAN_MAX_DLEN
+#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS	0
+
+/*
+ * Remark on CAN_ISOTP_DEFAULT_RECV_* values:
+ *
+ * We can strongly assume, that the Linux Kernel implementation of
+ * CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
+ * But as we like to be able to behave as a commonly available ECU,
+ * these default settings can be changed via sockopts.
+ * For that reason the STmin value is intentionally _not_ checked for
+ * consistency and copied directly into the flow control (FC) frame.
+ *
+ */
+
+#endif /* !_UAPI_CAN_ISOTP_H */
diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h
index 6a11d308eb5c..3386aa81fdf2 100644
--- a/include/uapi/linux/can/raw.h
+++ b/include/uapi/linux/can/raw.h
@@ -49,6 +49,9 @@
 #include <linux/can.h>
 
 #define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW)
+enum {
+	SCM_CAN_RAW_ERRQUEUE = 1,
+};
 
 /* for socket options affecting the socket (not the global system) */