diff options
author | Samuel Mendoza-Jonas <sam@mendozajonas.com> | 2018-11-16 15:51:59 +1100 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2018-11-17 21:09:49 -0800 |
commit | 8d951a75d022d94a05f5fa74217670a981e8302d (patch) | |
tree | d360d9898e404a423779ba2b3ced1a5801515997 /include | |
parent | 2878a2cfe57a5db21844801cf502fe535a3134b2 (diff) |
net/ncsi: Configure multi-package, multi-channel modes with failover
This patch extends the ncsi-netlink interface with two new commands and
three new attributes to configure multiple packages and/or channels at
once, and configure specific failover modes.
NCSI_CMD_SET_PACKAGE mask and NCSI_CMD_SET_CHANNEL_MASK set a whitelist
of packages or channels allowed to be configured with the
NCSI_ATTR_PACKAGE_MASK and NCSI_ATTR_CHANNEL_MASK attributes
respectively. If one of these whitelists is set only packages or
channels matching the whitelist are considered for the channel queue in
ncsi_choose_active_channel().
These commands may also use the NCSI_ATTR_MULTI_FLAG to signal that
multiple packages or channels may be configured simultaneously. NCSI
hardware arbitration (HWA) must be available in order to enable
multi-package mode. Multi-channel mode is always available.
If the NCSI_ATTR_CHANNEL_ID attribute is present in the
NCSI_CMD_SET_CHANNEL_MASK command the it sets the preferred channel as
with the NCSI_CMD_SET_INTERFACE command. The combination of preferred
channel and channel whitelist defines a primary channel and the allowed
failover channels.
If the NCSI_ATTR_MULTI_FLAG attribute is also present then the preferred
channel is configured for Tx/Rx and the other channels are enabled only
for Rx.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include')
-rw-r--r-- | include/uapi/linux/ncsi.h | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/include/uapi/linux/ncsi.h b/include/uapi/linux/ncsi.h index 0a26a5576645..a3f87c54fdb3 100644 --- a/include/uapi/linux/ncsi.h +++ b/include/uapi/linux/ncsi.h @@ -26,6 +26,12 @@ * @NCSI_CMD_SEND_CMD: send NC-SI command to network card. * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID * and NCSI_ATTR_CHANNEL_ID. + * @NCSI_CMD_SET_PACKAGE_MASK: set a whitelist of allowed packages. + * Requires NCSI_ATTR_IFINDEX and NCSI_ATTR_PACKAGE_MASK. + * @NCSI_CMD_SET_CHANNEL_MASK: set a whitelist of allowed channels. + * Requires NCSI_ATTR_IFINDEX, NCSI_ATTR_PACKAGE_ID, and + * NCSI_ATTR_CHANNEL_MASK. If NCSI_ATTR_CHANNEL_ID is present it sets + * the primary channel. * @NCSI_CMD_MAX: highest command number */ enum ncsi_nl_commands { @@ -34,6 +40,8 @@ enum ncsi_nl_commands { NCSI_CMD_SET_INTERFACE, NCSI_CMD_CLEAR_INTERFACE, NCSI_CMD_SEND_CMD, + NCSI_CMD_SET_PACKAGE_MASK, + NCSI_CMD_SET_CHANNEL_MASK, __NCSI_CMD_AFTER_LAST, NCSI_CMD_MAX = __NCSI_CMD_AFTER_LAST - 1 @@ -48,6 +56,10 @@ enum ncsi_nl_commands { * @NCSI_ATTR_PACKAGE_ID: package ID * @NCSI_ATTR_CHANNEL_ID: channel ID * @NCSI_ATTR_DATA: command payload + * @NCSI_ATTR_MULTI_FLAG: flag to signal that multi-mode should be enabled with + * NCSI_CMD_SET_PACKAGE_MASK or NCSI_CMD_SET_CHANNEL_MASK. + * @NCSI_ATTR_PACKAGE_MASK: 32-bit mask of allowed packages. + * @NCSI_ATTR_CHANNEL_MASK: 32-bit mask of allowed channels. * @NCSI_ATTR_MAX: highest attribute number */ enum ncsi_nl_attrs { @@ -57,6 +69,9 @@ enum ncsi_nl_attrs { NCSI_ATTR_PACKAGE_ID, NCSI_ATTR_CHANNEL_ID, NCSI_ATTR_DATA, + NCSI_ATTR_MULTI_FLAG, + NCSI_ATTR_PACKAGE_MASK, + NCSI_ATTR_CHANNEL_MASK, __NCSI_ATTR_AFTER_LAST, NCSI_ATTR_MAX = __NCSI_ATTR_AFTER_LAST - 1 |