Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v3.14 merge window

This pull request is quite extensive, containing
105 non-merge commits. Because of that, we describe
the changes in sections below:

New drivers:
	- Keystone PHY driver and DWC3 Glue Layer
	- Aeroflex Gaisler GRUSBDC
	- Tahvo PHY driver for N770
	- JZ4740 MUSB gluer Layer
	- Broadcom PHY Driver

Important new features:
	- MUSB DSPS learned about suspend/resume
	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
	- DWC3 initializes the new quirk flag so gadget drivers can use it.
	- AM335x PHY Driver learns about remote wakeup
	- Renesas USBHS now requests DMA Engine only once
	- s3c-hsotg is now re-used on Broadcom devices
	- USB PHY layer now makes sure to initialize the notifier for all
		drivers
	- omap-control learned about TI's new AM437x devices
	- few other usb gadget/function drivers learned about the new
		configfs-based binding.

Misc Fixes and Clean Ups:
	- Several sparse fixes all over the place
	- Removal of redundant of_match_ptr()
	- r-car gen2 phy now uses usb_add_phy_dev()
	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
	- some randconfig errors and build warnings were fixed
	- removal of unnecessary lock on dwc3-omap.c

Signed-of-by: Felipe Balbi <balbi@ti.com>

8 files changed, 385 insertions, 39 deletions

diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 6d722695e027..e273e5ac19c9 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -38,6 +38,14 @@ struct phy_ops {
 };
 
 /**
+ * struct phy_attrs - represents phy attributes
+ * @bus_width: Data path width implemented by PHY
+ */
+struct phy_attrs {
+	u32			bus_width;
+};
+
+/**
  * struct phy - represents the phy device
  * @dev: phy device
  * @id: id of the phy device
@@ -46,6 +54,7 @@ struct phy_ops {
  * @mutex: mutex to protect phy_ops
  * @init_count: used to protect when the PHY is used by multiple consumers
  * @power_count: used to protect when the PHY is used by multiple consumers
+ * @phy_attrs: used to specify PHY specific attributes
  */
 struct phy {
 	struct device		dev;
@@ -55,6 +64,7 @@ struct phy {
 	struct mutex		mutex;
 	int			init_count;
 	int			power_count;
+	struct phy_attrs	attrs;
 };
 
 /**
@@ -127,6 +137,14 @@ int phy_init(struct phy *phy);
 int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return phy->attrs.bus_width;
+}
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	phy->attrs.bus_width = bus_width;
+}
 struct phy *phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 void phy_put(struct phy *phy);
@@ -199,6 +217,16 @@ static inline int phy_power_off(struct phy *phy)
 	return -ENOSYS;
 }
 
+static inline int phy_get_bus_width(struct phy *phy)
+{
+	return -ENOSYS;
+}
+
+static inline void phy_set_bus_width(struct phy *phy, int bus_width)
+{
+	return;
+}
+
 static inline struct phy *phy_get(struct device *dev, const char *string)
 {
 	return ERR_PTR(-ENOSYS);
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
new file mode 100644
index 000000000000..43b5ce139c37
--- /dev/null
+++ b/include/linux/platform_data/usb-omap1.h
@@ -0,0 +1,53 @@
+/*
+ * Platform data for OMAP1 USB
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __LINUX_USB_OMAP1_H
+#define __LINUX_USB_OMAP1_H
+
+#include <linux/platform_device.h>
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	const char	*extcon;	/* extcon device for OTG */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+
+	struct platform_device *udc_device;
+	struct platform_device *ohci_device;
+	struct platform_device *otg_device;
+
+	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+	u32 (*usb1_init)(unsigned nwires);
+	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+	int (*ocpi_enable)(void);
+};
+
+#endif /* __LINUX_USB_OMAP1_H */
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 5e61589fc166..dba63f53906c 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -468,6 +468,8 @@ struct usb_function_instance {
 	struct config_group group;
 	struct list_head cfs_list;
 	struct usb_function_driver *fd;
+	int (*set_inst_name)(struct usb_function_instance *inst,
+			      const char *name);
 	void (*free_func_inst)(struct usb_function_instance *inst);
 };
 
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 65d0a88dbc67..71190663f1ee 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -3,34 +3,4 @@
 
 #include <uapi/linux/usb/functionfs.h>
 
-
-struct ffs_data;
-struct usb_composite_dev;
-struct usb_configuration;
-
-
-static int  functionfs_init(void) __attribute__((warn_unused_result));
-static void functionfs_cleanup(void);
-
-static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
-	__attribute__((warn_unused_result, nonnull));
-static void functionfs_unbind(struct ffs_data *ffs)
-	__attribute__((nonnull));
-
-static int functionfs_bind_config(struct usb_composite_dev *cdev,
-				  struct usb_configuration *c,
-				  struct ffs_data *ffs)
-	__attribute__((warn_unused_result, nonnull));
-
-
-static int functionfs_ready_callback(struct ffs_data *ffs)
-	__attribute__((warn_unused_result, nonnull));
-static void functionfs_closed_callback(struct ffs_data *ffs)
-	__attribute__((nonnull));
-static void *functionfs_acquire_dev_callback(const char *dev_name)
-	__attribute__((warn_unused_result, nonnull));
-static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
-	__attribute__((nonnull));
-
-
 #endif
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 942ef5e053bf..c3a61853cd13 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -148,6 +148,9 @@ struct usb_ep_ops {
  * @maxpacket:The maximum packet size used on this endpoint.  The initial
  *	value can sometimes be reduced (hardware allowing), according to
  *      the endpoint descriptor used to configure the endpoint.
+ * @maxpacket_limit:The maximum packet size value which can be handled by this
+ *	endpoint. It's set once by UDC driver when endpoint is initialized, and
+ *	should not be changed. Should not be confused with maxpacket.
  * @max_streams: The maximum number of streams supported
  *	by this EP (0 - 16, actual number is 2^n)
  * @mult: multiplier, 'mult' value for SS Isoc EPs
@@ -171,6 +174,7 @@ struct usb_ep {
 	const struct usb_ep_ops	*ops;
 	struct list_head	ep_list;
 	unsigned		maxpacket:16;
+	unsigned		maxpacket_limit:16;
 	unsigned		max_streams:16;
 	unsigned		mult:2;
 	unsigned		maxburst:5;
@@ -182,6 +186,21 @@ struct usb_ep {
 /*-------------------------------------------------------------------------*/
 
 /**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function shoud be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+					      unsigned maxpacket_limit)
+{
+	ep->maxpacket_limit = maxpacket_limit;
+	ep->maxpacket = maxpacket_limit;
+}
+
+/**
  * usb_ep_enable - configure endpoint, making it usable
  * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
  *	drivers discover endpoints through the ep_list of a usb_gadget.
@@ -485,6 +504,11 @@ struct usb_gadget_ops {
  * @max_speed: Maximal speed the UDC can handle.  UDC must support this
  *      and all slower speeds.
  * @state: the state we are now (attached, suspended, configured, etc)
+ * @name: Identifies the controller hardware type.  Used in diagnostics
+ *	and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ * @out_epnum: last used out ep number
+ * @in_epnum: last used in ep number
  * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
  *	gadget driver must provide a USB OTG descriptor.
@@ -497,11 +521,8 @@ struct usb_gadget_ops {
  *	only supports HNP on a different root port.
  * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
  *	enabled HNP support.
- * @name: Identifies the controller hardware type.  Used in diagnostics
- *	and sometimes configuration.
- * @dev: Driver model state for this abstract device.
- * @out_epnum: last used out ep number
- * @in_epnum: last used in ep number
+ * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
+ *	MaxPacketSize.
  *
  * Gadgets have a mostly-portable "gadget driver" implementing device
  * functions, handling all usb configurations and interfaces.  Gadget
@@ -530,16 +551,18 @@ struct usb_gadget {
 	enum usb_device_speed		speed;
 	enum usb_device_speed		max_speed;
 	enum usb_device_state		state;
+	const char			*name;
+	struct device			dev;
+	unsigned			out_epnum;
+	unsigned			in_epnum;
+
 	unsigned			sg_supported:1;
 	unsigned			is_otg:1;
 	unsigned			is_a_peripheral:1;
 	unsigned			b_hnp_enable:1;
 	unsigned			a_hnp_support:1;
 	unsigned			a_alt_hnp_support:1;
-	const char			*name;
-	struct device			dev;
-	unsigned			out_epnum;
-	unsigned			in_epnum;
+	unsigned			quirk_ep_out_aligned_size:1;
 };
 #define work_to_gadget(w)	(container_of((w), struct usb_gadget, work))
 
@@ -558,6 +581,23 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
 
 
 /**
+ * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
+ *	requires quirk_ep_out_aligned_size, otherwise reguens len.
+ * @g: controller to check for quirk
+ * @ep: the endpoint whose maxpacketsize is used to align @len
+ * @len: buffer size's length to align to @ep's maxpacketsize
+ *
+ * This helper is used in case it's required for any reason to check and maybe
+ * align buffer's size to an ep's maxpacketsize.
+ */
+static inline size_t
+usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
+{
+	return !g->quirk_ep_out_aligned_size ? len :
+			round_up(len, (size_t)ep->desc->wMaxPacketSize);
+}
+
+/**
  * gadget_is_dualspeed - return true iff the hardware handles high speed
  * @g: controller that might support both high and full speeds
  */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index eb505250940a..a4ee1b582183 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -76,6 +76,9 @@ struct musb_hdrc_config {
 	unsigned	dma:1 __deprecated; /* supports DMA */
 	unsigned	vendor_req:1 __deprecated; /* vendor registers required */
 
+	/* need to explicitly de-assert the port reset after resume? */
+	unsigned	host_port_deassert_reset_at_resume:1;
+
 	u8		num_eps;	/* number of endpoints _with_ ep0 */
 	u8		dma_channels __deprecated; /* number of dma channels */
 	u8		dyn_fifo_size;	/* dynamic size in bytes */
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 596b01918813..69ae383ee3cc 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -24,6 +24,7 @@ enum omap_control_usb_type {
 	OMAP_CTRL_TYPE_USB2,	/* USB2_PHY, power down in CONTROL_DEV_CONF */
 	OMAP_CTRL_TYPE_PIPE3,	/* PIPE3 PHY, DPLL & seperate Rx/Tx power */
 	OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+	OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
 };
 
 struct omap_control_usb {
@@ -64,6 +65,11 @@ enum omap_control_usb_mode {
 
 #define OMAP_CTRL_USB2_PHY_PD		BIT(28)
 
+#define AM437X_CTRL_USB2_PHY_PD		BIT(0)
+#define AM437X_CTRL_USB2_OTG_PD		BIT(1)
+#define AM437X_CTRL_USB2_OTGVDET_EN	BIT(19)
+#define AM437X_CTRL_USB2_OTGSESSEND_EN	BIT(20)
+
 #if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
 extern void omap_control_usb_phy_power(struct device *dev, int on);
 extern void omap_control_usb_set_mode(struct device *dev,
diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h
new file mode 100644
index 000000000000..b6ba1bfb86f2
--- /dev/null
+++ b/include/linux/usb/otg-fsm.h
@@ -0,0 +1,244 @@
+/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_OTG_FSM_H
+#define __LINUX_USB_OTG_FSM_H
+
+#include <linux/mutex.h>
+#include <linux/errno.h>
+
+#undef VERBOSE
+
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s]  " fmt , \
+				 __func__, ## args)
+#else
+#define VDBG(stuff...)	do {} while (0)
+#endif
+
+#ifdef VERBOSE
+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
+#else
+#define MPC_LOC do {} while (0)
+#endif
+
+#define PROTO_UNDEF	(0)
+#define PROTO_HOST	(1)
+#define PROTO_GADGET	(2)
+
+enum otg_fsm_timer {
+	/* Standard OTG timers */
+	A_WAIT_VRISE,
+	A_WAIT_VFALL,
+	A_WAIT_BCON,
+	A_AIDL_BDIS,
+	B_ASE0_BRST,
+	A_BIDL_ADIS,
+
+	/* Auxiliary timers */
+	B_SE0_SRP,
+	B_SRP_FAIL,
+	A_WAIT_ENUM,
+
+	NUM_OTG_FSM_TIMERS,
+};
+
+/* OTG state machine according to the OTG spec */
+struct otg_fsm {
+	/* Input */
+	int id;
+	int adp_change;
+	int power_up;
+	int test_device;
+	int a_bus_drop;
+	int a_bus_req;
+	int a_srp_det;
+	int a_vbus_vld;
+	int b_conn;
+	int a_bus_resume;
+	int a_bus_suspend;
+	int a_conn;
+	int b_bus_req;
+	int b_se0_srp;
+	int b_ssend_srp;
+	int b_sess_vld;
+	/* Auxilary inputs */
+	int a_sess_vld;
+	int b_bus_resume;
+	int b_bus_suspend;
+
+	/* Output */
+	int data_pulse;
+	int drv_vbus;
+	int loc_conn;
+	int loc_sof;
+	int adp_prb;
+	int adp_sns;
+
+	/* Internal variables */
+	int a_set_b_hnp_en;
+	int b_srp_done;
+	int b_hnp_enable;
+	int a_clr_err;
+
+	/* Informative variables */
+	int a_bus_drop_inf;
+	int a_bus_req_inf;
+	int a_clr_err_inf;
+	int b_bus_req_inf;
+	/* Auxilary informative variables */
+	int a_suspend_req_inf;
+
+	/* Timeout indicator for timers */
+	int a_wait_vrise_tmout;
+	int a_wait_vfall_tmout;
+	int a_wait_bcon_tmout;
+	int a_aidl_bdis_tmout;
+	int b_ase0_brst_tmout;
+	int a_bidl_adis_tmout;
+
+	struct otg_fsm_ops *ops;
+	struct usb_otg *otg;
+
+	/* Current usb protocol used: 0:undefine; 1:host; 2:client */
+	int protocol;
+	struct mutex lock;
+};
+
+struct otg_fsm_ops {
+	void	(*chrg_vbus)(struct otg_fsm *fsm, int on);
+	void	(*drv_vbus)(struct otg_fsm *fsm, int on);
+	void	(*loc_conn)(struct otg_fsm *fsm, int on);
+	void	(*loc_sof)(struct otg_fsm *fsm, int on);
+	void	(*start_pulse)(struct otg_fsm *fsm);
+	void	(*start_adp_prb)(struct otg_fsm *fsm);
+	void	(*start_adp_sns)(struct otg_fsm *fsm);
+	void	(*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+	void	(*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+	int	(*start_host)(struct otg_fsm *fsm, int on);
+	int	(*start_gadget)(struct otg_fsm *fsm, int on);
+};
+
+
+static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->chrg_vbus)
+		return -EOPNOTSUPP;
+	fsm->ops->chrg_vbus(fsm, on);
+	return 0;
+}
+
+static inline int otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->drv_vbus)
+		return -EOPNOTSUPP;
+	if (fsm->drv_vbus != on) {
+		fsm->drv_vbus = on;
+		fsm->ops->drv_vbus(fsm, on);
+	}
+	return 0;
+}
+
+static inline int otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->loc_conn)
+		return -EOPNOTSUPP;
+	if (fsm->loc_conn != on) {
+		fsm->loc_conn = on;
+		fsm->ops->loc_conn(fsm, on);
+	}
+	return 0;
+}
+
+static inline int otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->loc_sof)
+		return -EOPNOTSUPP;
+	if (fsm->loc_sof != on) {
+		fsm->loc_sof = on;
+		fsm->ops->loc_sof(fsm, on);
+	}
+	return 0;
+}
+
+static inline int otg_start_pulse(struct otg_fsm *fsm)
+{
+	if (!fsm->ops->start_pulse)
+		return -EOPNOTSUPP;
+	if (!fsm->data_pulse) {
+		fsm->data_pulse = 1;
+		fsm->ops->start_pulse(fsm);
+	}
+	return 0;
+}
+
+static inline int otg_start_adp_prb(struct otg_fsm *fsm)
+{
+	if (!fsm->ops->start_adp_prb)
+		return -EOPNOTSUPP;
+	if (!fsm->adp_prb) {
+		fsm->adp_sns = 0;
+		fsm->adp_prb = 1;
+		fsm->ops->start_adp_prb(fsm);
+	}
+	return 0;
+}
+
+static inline int otg_start_adp_sns(struct otg_fsm *fsm)
+{
+	if (!fsm->ops->start_adp_sns)
+		return -EOPNOTSUPP;
+	if (!fsm->adp_sns) {
+		fsm->adp_sns = 1;
+		fsm->ops->start_adp_sns(fsm);
+	}
+	return 0;
+}
+
+static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+	if (!fsm->ops->add_timer)
+		return -EOPNOTSUPP;
+	fsm->ops->add_timer(fsm, timer);
+	return 0;
+}
+
+static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+	if (!fsm->ops->del_timer)
+		return -EOPNOTSUPP;
+	fsm->ops->del_timer(fsm, timer);
+	return 0;
+}
+
+static inline int otg_start_host(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->start_host)
+		return -EOPNOTSUPP;
+	return fsm->ops->start_host(fsm, on);
+}
+
+static inline int otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+	if (!fsm->ops->start_gadget)
+		return -EOPNOTSUPP;
+	return fsm->ops->start_gadget(fsm, on);
+}
+
+int otg_statemachine(struct otg_fsm *fsm);
+
+#endif /* __LINUX_USB_OTG_FSM_H */