Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (21 commits)
  Blackfin Serial Driver: abstract away DLAB differences into header
  Blackfin Serial Driver: macro away the IER differences between processors
  [Blackfin] arch: remove useless IRQ_SW_INT defines
  [Blackfin] arch: protect linux/usb/musb.h include until the driver gets mainlined
  [Blackfin] arch: protect linux/usb/isp1362.h include until the driver gets mainlined
  [Blackfin] arch: add EBIU supporting for BF54x EZKIT SMSC LAN911x/LAN921x families embedded ethernet driver
  [Blackfin] arch: Set spi flash partition on bf527 as like bf548.
  [Blackfin] arch: fix bug - Remove module will not free L1 memory used
  [Blackfin] arch: fix wrong header name in comment
  [Blackfin] arch: Fix BUG - spi flash on bf527 ezkit would fail at mount
  [Blackfin] arch: add twi_lcd and twi_keypad i2c board info to bf527-ezkit
  [Blackfin] arch: Add physmap partition for BF527-EZkit
  [Blackfin] arch: fix gdb testing regression
  [Blackfin] arch: disable single stepping when delivering a signal
  [Blackfin] arch: Delete unused (copied from m68k) entries in asm-offsets.c.
  [Blackfin] arch: In the double fault handler, set up the PT_RETI slot
  [Blackfin] arch: Support for CPU_FREQ and NOHZ
  [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support
  [Blackfin] arch: fix bug -  breaking the atomic sections code.
  [Blackfin] arch: Equalize include files: Add VR_CTL masks
  ...

15 files changed, 124 insertions, 35 deletions

diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h
index 686cf83a5269..7f34cd384f12 100644
--- a/include/asm-blackfin/dpmc.h
+++ b/include/asm-blackfin/dpmc.h
@@ -1,7 +1,7 @@
 /*
  * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
  *   			 	Management Controller Driver.
- * Copyright (C) 2004 Analog Device Inc.
+ * Copyright (C) 2004-2008 Analog Device Inc.
  *
  */
 #ifndef _BLACKFIN_DPMC_H_
@@ -65,6 +65,14 @@ void disable_wdog_timer(void);
 extern unsigned long get_cclk(void);
 extern unsigned long get_sclk(void);
 
+struct bfin_dpmc_platform_data {
+	const unsigned int *tuple_tab;
+	unsigned short tabsize;
+	unsigned short vr_settling_time; /* in us */
+};
+
+#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))
+
 #endif	/* __KERNEL__ */
 
 #endif	/*_BLACKFIN_DPMC_H_*/
diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h
index 562c6d3a3232..c4f721e0d00d 100644
--- a/include/asm-blackfin/entry.h
+++ b/include/asm-blackfin/entry.h
@@ -17,6 +17,11 @@
 #define	PF_DTRACE_OFF	1
 #define	PF_DTRACE_BIT	5
 
+/*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
 /* This one is used for exceptions, emulation, and NMI.  It doesn't push
    RETI and doesn't do cli.  */
 #define SAVE_ALL_SYS		save_context_no_interrupts
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index f0ab2736a680..26e3c8076b4e 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
 #define UART_PUT_CHAR(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_THR), v)
 #define UART_PUT_DLL(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
 #define UART_PUT_IER(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_IER), v)
+#define UART_SET_IER(uart, v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart, v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
 #define UART_PUT_LCR(uart, v)    bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
 #define UART_PUT_GCTL(uart, v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
 
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index fbe88dee3e2d..d016603b6615 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h
index 17e1548cec08..0ab4dd7494cf 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/include/asm-blackfin/mach-bf533/defBF532.h
@@ -468,6 +468,8 @@
 #define	VLEV_110		0x00B0	/* 		VLEV = 1.10 V (-5% - +10% Accuracy)	*/
 #define	VLEV_115		0x00C0	/* 		VLEV = 1.15 V (-5% - +10% Accuracy)	*/
 #define	VLEV_120		0x00D0	/* 		VLEV = 1.20 V (-5% - +10% Accuracy)	*/
+#define	VLEV_125		0x00E0	/*              VLEV = 1.25 V (-5% - +10% Accuracy)     */
+#define	VLEV_130		0x00F0	/*              VLEV = 1.30 V (-5% - +10% Accuracy)     */
 
 #define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
 #define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h
index 832e6f6122da..5aa38e5da6b7 100644
--- a/include/asm-blackfin/mach-bf533/irq.h
+++ b/include/asm-blackfin/mach-bf533/irq.h
@@ -66,12 +66,13 @@ Core        Emulation               **
 	    DMA8/9 Interrupt	    IVG13	28
 	    DMA10/11 Interrupt	    IVG13	29
 	    Watchdog Timer	    IVG13	30
-            Software Interrupt 1    IVG14       31
-            Software Interrupt 2    --
+
+            Softirq		    IVG14       31
+            System Call    --
                  (lowest priority)  IVG15       32 *
  */
-#define SYS_IRQS		32
-#define NR_PERI_INTS    24
+#define SYS_IRQS	31
+#define NR_PERI_INTS	24
 
 /* The ABSTRACT IRQ definitions */
 /** the first seven of the following are fixed, the rest you change if you need to **/
@@ -96,7 +97,7 @@ Core        Emulation               **
 #define	IRQ_SPORT0_TX		17	/*DMA2 Interrupt (SPORT0 TX) */
 #define	IRQ_SPORT1_RX		18	/*DMA3 Interrupt (SPORT1 RX) */
 #define	IRQ_SPORT1_TX		19	/*DMA4 Interrupt (SPORT1 TX) */
-#define IRQ_SPI			20	/*DMA5 Interrupt (SPI) */
+#define 	IRQ_SPI			20	/*DMA5 Interrupt (SPI) */
 #define	IRQ_UART_RX		21	/*DMA6 Interrupt (UART RX) */
 #define	IRQ_UART_TX		22	/*DMA7 Interrupt (UART TX) */
 #define	IRQ_TMR0		23	/*Timer 0 */
@@ -108,9 +109,6 @@ Core        Emulation               **
 #define	IRQ_MEM_DMA1		29	/*DMA10/11 Interrupt (Memory DMA Stream 1) */
 #define	IRQ_WATCH	   	30	/*Watch Dog Timer */
 
-#define	IRQ_SW_INT1		31	/*Software Int 1 */
-#define	IRQ_SW_INT2		32	/*Software Int 2 (reserved for SYSCALL) */
-
 #define IRQ_PF0			33
 #define IRQ_PF1			34
 #define IRQ_PF2			35
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index fd100a415b98..f79d1a0e9129 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index be6f2ff77f31..2e68a8a1e730 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -34,24 +34,23 @@
 
 /*
  * Interrupt source definitions
-             Event Source    Core Event Name
-Core        Emulation               **
- Events         (highest priority)  EMU         0
-            Reset                   RST         1
-            NMI                     NMI         2
-            Exception               EVX         3
-            Reserved                --          4
-            Hardware Error          IVHW        5
-            Core Timer              IVTMR       6 *
-
-.....
-
-            Software Interrupt 1    IVG14       31
-            Software Interrupt 2    --
-                 (lowest priority)  IVG15       32 *
+ *            Event Source    Core Event Name
+ * Core       Emulation               **
+ * Events         (highest priority)  EMU         0
+ *            Reset                   RST         1
+ *            NMI                     NMI         2
+ *            Exception               EVX         3
+ *            Reserved                --          4
+ *            Hardware Error          IVHW        5
+ *            Core Timer              IVTMR       6
+ *  .....
+ *
+ *            Softirq		      IVG14
+ *            System Call    --
+ *               (lowest priority)    IVG15
  */
 
-#define SYS_IRQS        41
+#define SYS_IRQS        39
 #define NR_PERI_INTS    32
 
 /* The ABSTRACT IRQ definitions */
@@ -95,10 +94,8 @@ Core        Emulation               **
 #define IRQ_PORTG_INTB      35	/* PF Port G (PF15:0) Interrupt B */
 #define IRQ_MEM_DMA0        36	/*(Memory DMA Stream 0) */
 #define IRQ_MEM_DMA1        37	/*(Memory DMA Stream 1) */
-#define IRQ_PROG_INTB	    38	/* PF Ports F (PF15:0) Interrupt B */
+#define IRQ_PROG_INTB	      38	/* PF Ports F (PF15:0) Interrupt B */
 #define IRQ_WATCH           38	/*Watch Dog Timer */
-#define IRQ_SW_INT1         40	/*Software Int 1 */
-#define IRQ_SW_INT2         41	/*Software Int 2 (reserved for SYSCALL) */
 
 #define IRQ_PPI_ERROR       42	/*PPI Error Interrupt */
 #define IRQ_CAN_ERROR       43	/*CAN Error Interrupt */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 6547027cd3e6..5eb46a77d919 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -54,6 +54,9 @@
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 #define UART_PUT_MCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_MCR),v)
 
+#define UART_SET_DLAB(uart)     /* MMRs not muxed on BF54x */
+#define UART_CLEAR_DLAB(uart)   /* MMRs not muxed on BF54x */
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 08f90c21fe8a..e022e896cb18 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -2329,6 +2329,26 @@
 #define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
 #define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
 
+#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+
+#define	GAIN_5			0x0000	/* GAIN = 5*/
+#define	GAIN_10			0x0004	/* GAIN = 1*/
+#define	GAIN_20			0x0008	/* GAIN = 2*/
+#define	GAIN_50			0x000C	/* GAIN = 5*/
+
+#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 8a4e66d1db37..7a9628769296 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -44,10 +44,15 @@
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
 #define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart,v)  UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
+#define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index 366c9b9a0cb7..1ab50e906fe7 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -868,6 +868,34 @@
 #define CHIPID_FAMILY          0x0FFFF000
 #define CHIPID_MANUFACTURE     0x00000FFE
 
+/* VR_CTL Masks																	*/
+#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+#define	HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation	*/
+#define	FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define	FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define	FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+
+#define	GAIN			0x000C	/* Voltage Level Gain	*/
+#define	GAIN_5			0x0000	/* GAIN = 5*/
+#define	GAIN_10			0x0004	/* GAIN = 1*/
+#define	GAIN_20			0x0008	/* GAIN = 2*/
+#define	GAIN_50			0x000C	/* GAIN = 5*/
+
+#define	VLEV			0x00F0	/* Internal Voltage Level */
+#define	VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define	VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define	VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define	VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define	VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define	VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define	VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define	VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define	VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define	VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define	SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
 /* PLL_DIV Masks */
 #define SCLK_DIV(x)  (x)	/* SCLK = VCO / x */
 
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/include/asm-blackfin/mach-bf561/irq.h
index 83f0383957d2..6698389c5564 100644
--- a/include/asm-blackfin/mach-bf561/irq.h
+++ b/include/asm-blackfin/mach-bf561/irq.h
@@ -118,12 +118,13 @@
 	    Supplemental interrupt 0		IVG7	    69
 	    supplemental interrupt 1		IVG7	    70
 
-            Software Interrupt 1		IVG14       71
-            Software Interrupt 2		IVG15       72 *
-						(lowest priority)
+            Softirq		    		IVG14
+            System Call    --
+                 (lowest priority)  		IVG15
+
  **********************************************************************/
 
-#define SYS_IRQS		72
+#define SYS_IRQS		71
 #define NR_PERI_INTS		64
 
 /*
@@ -237,9 +238,7 @@
 #define IRQ_RESERVED_2		(IVG_BASE + 61)	/* Reserved interrupt       */
 #define IRQ_SUPPLE_0		(IVG_BASE + 62)	/* Supplemental interrupt 0 */
 #define IRQ_SUPPLE_1		(IVG_BASE + 63)	/* supplemental interrupt 1 */
-#define	IRQ_SW_INT1		71	/* Software Interrupt 1     */
-#define	IRQ_SW_INT2		72	/* Software Interrupt 2     */
-						/* reserved for SYSCALL */
+
 #define IRQ_PF0			73
 #define IRQ_PF1			74
 #define IRQ_PF2			75
diff --git a/include/asm-blackfin/mach-common/context.S b/include/asm-blackfin/mach-common/context.S
index fd0ebe1862b8..c0e630edfb9a 100644
--- a/include/asm-blackfin/mach-common/context.S
+++ b/include/asm-blackfin/mach-common/context.S
@@ -28,6 +28,11 @@
  */
 
 /*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/*
  * Code to save processor context.
  *  We even save the register which are preserved by a function call
  *	 - r4, r5, r6, r7, p3, p4, p5
diff --git a/include/asm-blackfin/time.h b/include/asm-blackfin/time.h
index 6e5859b6ea32..ddc43ce38533 100644
--- a/include/asm-blackfin/time.h
+++ b/include/asm-blackfin/time.h
@@ -24,6 +24,8 @@
 
 #ifndef CONFIG_CPU_FREQ
 #define TIME_SCALE 1
+#define __bfin_cycles_off (0)
+#define __bfin_cycles_mod (0)
 #else
 /*
  * Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@@ -31,6 +33,8 @@
  * adjust the Core Timer Presale Register. This way we don't lose time.
  */
 #define TIME_SCALE 4
+extern unsigned long long __bfin_cycles_off;
+extern unsigned int __bfin_cycles_mod;
 #endif
 
 #endif