powerpc: merge uaccess.h

There is still a bug to be fixed and more merging to be done.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

3 files changed, 504 insertions, 734 deletions

diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h
new file mode 100644
index 000000000000..2ecc3e16e49e
--- /dev/null
+++ b/include/asm-powerpc/uaccess.h
@@ -0,0 +1,504 @@
+#ifndef _ARCH_POWERPC_UACCESS_H
+#define _ARCH_POWERPC_UACCESS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * The fs/ds values are now the highest legal address in the "segment".
+ * This simplifies the checking in the routines below.
+ */
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#ifdef __powerpc64__
+#define KERNEL_DS	MAKE_MM_SEG(0UL)
+#define USER_DS		MAKE_MM_SEG(0xf000000000000000UL)
+#else
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.fs)
+#define set_fs(val)	(current->thread.fs = (val))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+#ifdef __powerpc64__
+/*
+ * Use the alpha trick for checking ranges:
+ *
+ * Is a address valid? This does a straightforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
+ *
+ * We dont have to check for high bits in (addr+size) because the first
+ * two checks force the maximum result to be below the start of the
+ * kernel region.
+ */
+#define __access_ok(addr, size, segment)	\
+	(((segment).seg & (addr | size )) == 0)
+
+#else
+
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) &&		\
+	 (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr)))))
+
+#endif
+
+#define access_ok(type, addr, size)		\
+	(__chk_user_ptr(addr),			\
+	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * The "user64" versions of the user access functions are versions that
+ * allow access of 64-bit data. The "get_user" functions do not
+ * properly handle 64-bit data because the value gets down cast to a long.
+ * The "put_user" functions already handle 64-bit data properly but we add
+ * "user64" versions for completeness
+ */
+#define get_user(x, ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+#define put_user(x, ptr) \
+	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user(x, ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+#ifndef __powerpc64__
+#define __get_user64(x, ptr) \
+	__get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user64(x, ptr) __put_user(x, ptr)
+#endif
+
+#ifdef __powerpc64__
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+#endif
+
+extern long __put_user_bad(void);
+
+#ifdef __powerpc64__
+#define __EX_TABLE_ALIGN	"3"
+#define __EX_TABLE_TYPE		"llong"
+#else
+#define __EX_TABLE_ALIGN	"2"
+#define __EX_TABLE_TYPE		"long"
+#endif
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"1:	" op " %1,0(%2)	# put_user\n"		\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	li %0,%3\n"				\
+		"	b 2b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align " __EX_TABLE_ALIGN "\n"		\
+		"	."__EX_TABLE_TYPE" 1b,3b\n"		\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifndef __powerpc64__
+#define __put_user_asm2(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	stw %1,0(%2)\n"				\
+		"2:	stw %1+1,4(%2)\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	li %0,%3\n"				\
+		"	b 3b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+		"	.align " __EX_TABLE_ALIGN "\n"		\
+		"	." __EX_TABLE_TYPE " 1b,4b\n"		\
+		"	." __EX_TABLE_TYPE " 2b,4b\n"		\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+#else /* __powerpc64__ */
+#define __put_user_asm2(x, ptr, retval)				\
+	  __put_user_asm(x, ptr, retval, "std")
+#endif /* __powerpc64__ */
+
+#define __put_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	  case 1: __put_user_asm(x, ptr, retval, "stb"); break;	\
+	  case 2: __put_user_asm(x, ptr, retval, "sth"); break;	\
+	  case 4: __put_user_asm(x, ptr, retval, "stw"); break;	\
+	  case 8: __put_user_asm2(x, ptr, retval); break;	\
+	  default: __put_user_bad();				\
+	}							\
+} while (0)
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	might_sleep();						\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), (ptr), (size), __pu_err);		\
+	__pu_err;						\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size))			\
+		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)	# get_user\n"  	\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align "__EX_TABLE_ALIGN "\n"	\
+		"	." __EX_TABLE_TYPE " 1b,3b\n"	\
+		".previous"				\
+		: "=r" (err), "=r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifndef __powerpc64__
+#define __get_user_asm2(x, addr, err)	 		\
+	__asm__ __volatile__(				\
+		"1:	lwz %1,0(%2)\n"			\
+		"2:	lwz %1+1,4(%2)\n"		\
+		"3:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"4:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	li %1+1,0\n"			\
+		"	b 3b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align " __EX_TABLE_ALIGN "\n"	\
+		"	." __EX_TABLE_TYPE " 1b,4b\n"	\
+		"	." __EX_TABLE_TYPE " 2b,4b\n"	\
+		".previous"				\
+		: "=r" (err), "=&r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+#else
+#define __get_user_asm2(x, addr, err)	 		\
+	__get_user_asm(x, addr, err, "ld")
+#endif /* __powerpc64__ */
+
+#define __get_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	__chk_user_ptr(ptr);					\
+ 	if (size > sizeof(x))					\
+ 		(x) = __get_user_bad();				\
+	switch (size) {						\
+	case 1: __get_user_asm(x, ptr, retval, "lbz"); break;	\
+	case 2: __get_user_asm(x, ptr, retval, "lhz"); break;	\
+	case 4: __get_user_asm(x, ptr, retval, "lwz"); break;	\
+	case 8: __get_user_asm2(x, ptr, retval);  break;	\
+	default: (x) = __get_user_bad();			\
+	}							\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	__chk_user_ptr(ptr);					\
+	might_sleep();						\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#ifndef __powerpc64__
+#define __get_user64_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	long long __gu_val;					\
+	__chk_user_ptr(ptr);					\
+	might_sleep();						\
+	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+#endif /* __powerpc64__ */
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long  __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+ 	might_sleep();							\
+	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+/* more complex routines */
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#ifndef __powerpc64__
+extern inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_tofrom_user((__force void __user *)to, from, n);
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + n - TASK_SIZE;
+		return __copy_tofrom_user((__force void __user *)to, from,
+				n - over) + over;
+	}
+	return n;
+}
+
+extern inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_tofrom_user(to, (__force void __user *)from, n);
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + n - TASK_SIZE;
+		return __copy_tofrom_user(to, (__force void __user *)from,
+				n - over) + over;
+	}
+	return n;
+}
+
+#else /* __powerpc64__ */
+
+static inline unsigned long
+__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret);
+			break;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret);
+			break;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret);
+			break;
+		case 8:
+			__get_user_size(*(u64 *)to, from, 8, ret);
+			break;
+		}
+		return (ret == -EFAULT) ? n : 0;
+	}
+	return __copy_tofrom_user((__force void __user *) to, from, n);
+}
+
+static inline unsigned long
+__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
+			break;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
+			break;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
+			break;
+		case 8:
+			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
+			break;
+		}
+		return (ret == -EFAULT) ? n : 0;
+	}
+	return __copy_tofrom_user(to, (__force const void __user *) from, n);
+}
+
+#endif /* __powerpc64__ */
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	might_sleep();
+#ifndef __powerpc64__
+	return __copy_tofrom_user((__force void __user *)to, from, size);
+#else /* __powerpc64__ */
+	return __copy_from_user_inatomic(to, from, size);
+#endif /* __powerpc64__ */
+}
+
+static inline unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+	might_sleep();
+#ifndef __powerpc64__
+	return __copy_tofrom_user(to, (__force void __user *)from, size);
+#else /* __powerpc64__ */
+	return __copy_to_user_inatomic(to, from, size);
+#endif /* __powerpc64__ */
+}
+
+#ifndef __powerpc64__
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+#else /* __powerpc64__ */
+#define __copy_in_user(to, from, size) \
+	__copy_tofrom_user((to), (from), (size))
+
+extern unsigned long copy_from_user(void *to, const void __user *from,
+				    unsigned long n);
+extern unsigned long copy_to_user(void __user *to, const void *from,
+				  unsigned long n);
+extern unsigned long copy_in_user(void __user *to, const void __user *from,
+				  unsigned long n);
+#endif /* __powerpc64__ */
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+static inline unsigned long clear_user(void __user *addr, unsigned long size)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		return __clear_user(addr, size);
+#ifndef __powerpc64__
+	if ((unsigned long)addr < TASK_SIZE) {
+		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
+		return __clear_user(addr, size - over) + over;
+	}
+#endif /* __powerpc64__ */
+	return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dst, const char __user *src,
+		long count)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, src, 1)))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+#ifndef __powerpc64__
+extern int __strnlen_user(const char __user *str, long len, unsigned long top);
+#else /* __powerpc64__ */
+extern int __strnlen_user(const char __user *str, long len);
+#endif /* __powerpc64__ */
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ *
+ * The `top' parameter to __strnlen_user is to make sure that
+ * we can never overflow from the user area into kernel space.
+ */
+static inline int strnlen_user(const char __user *str, long len)
+{
+#ifndef __powerpc64__
+	unsigned long top = current->thread.fs.seg;
+
+	if ((unsigned long)str > top)
+		return 0;
+	return __strnlen_user(str, len, top);
+#else /* __powerpc64__ */
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, str, 1)))
+		return __strnlen_user(str, len);
+	return 0;
+#endif /* __powerpc64__ */
+}
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif	/* _ARCH_POWERPC_UACCESS_H */
diff --git a/include/asm-ppc/uaccess.h b/include/asm-ppc/uaccess.h
deleted file mode 100644
index 63f56224da8c..000000000000
--- a/include/asm-ppc/uaccess.h
+++ /dev/null
@@ -1,393 +0,0 @@
-#ifdef __KERNEL__
-#ifndef _PPC_UACCESS_H
-#define _PPC_UACCESS_H
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/processor.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * The fs/ds values are now the highest legal address in the "segment".
- * This simplifies the checking in the routines below.
- */
-
-#define KERNEL_DS	((mm_segment_t) { ~0UL })
-#define USER_DS		((mm_segment_t) { TASK_SIZE - 1 })
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current->thread.fs)
-#define set_fs(val)	(current->thread.fs = (val))
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-#define __access_ok(addr,size)						    \
-	((addr) <= current->thread.fs.seg				    \
-	 && ((size) == 0 || (size) - 1 <= current->thread.fs.seg - (addr)))
-
-#define access_ok(type, addr, size) \
-	(__chk_user_ptr(addr),__access_ok((unsigned long)(addr),(size)))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- *
- * As we use the same address space for kernel and user data on the
- * PowerPC, we can just do these as direct assignments.  (Of course, the
- * exception handling means that it's no longer "just"...)
- *
- * The "user64" versions of the user access functions are versions that 
- * allow access of 64-bit data. The "get_user" functions do not 
- * properly handle 64-bit data because the value gets down cast to a long. 
- * The "put_user" functions already handle 64-bit data properly but we add 
- * "user64" versions for completeness
- */
-#define get_user(x,ptr) \
-  __get_user_check((x),(ptr),sizeof(*(ptr)))
-#define get_user64(x,ptr) \
-  __get_user64_check((x),(ptr),sizeof(*(ptr)))
-#define put_user(x,ptr) \
-  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define put_user64(x,ptr) put_user(x,ptr)
-
-#define __get_user(x,ptr) \
-  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __get_user64(x,ptr) \
-  __get_user64_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __put_user(x,ptr) \
-  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-#define __put_user64(x,ptr) __put_user(x,ptr)
-
-extern long __put_user_bad(void);
-
-#define __put_user_nocheck(x,ptr,size)			\
-({							\
-	long __pu_err;					\
-	__chk_user_ptr(ptr);				\
-	__put_user_size((x),(ptr),(size),__pu_err);	\
-	__pu_err;					\
-})
-
-#define __put_user_check(x,ptr,size)				\
-({								\
-	long __pu_err = -EFAULT;				\
-	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (access_ok(VERIFY_WRITE,__pu_addr,size))		\
-		__put_user_size((x),__pu_addr,(size),__pu_err);	\
-	__pu_err;						\
-})
-
-#define __put_user_size(x,ptr,size,retval)		\
-do {							\
-	retval = 0;					\
-	switch (size) {					\
-	case 1:						\
-		__put_user_asm(x, ptr, retval, "stb");	\
-		break;					\
-	case 2:						\
-		__put_user_asm(x, ptr, retval, "sth");	\
-		break;					\
-	case 4:						\
-		__put_user_asm(x, ptr, retval, "stw");	\
-		break;					\
-	case 8:						\
-		__put_user_asm2(x, ptr, retval);	\
-		break;					\
-	default:					\
-		__put_user_bad();			\
-	}						\
-} while (0)
-
-/*
- * We don't tell gcc that we are accessing memory, but this is OK
- * because we do not write to any memory gcc knows about, so there
- * are no aliasing issues.
- */
-#define __put_user_asm(x, addr, err, op)			\
-	__asm__ __volatile__(					\
-		"1:	"op" %1,0(%2)\n"			\
-		"2:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		"3:	li %0,%3\n"				\
-		"	b 2b\n"					\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		"	.align 2\n"				\
-		"	.long 1b,3b\n"				\
-		".previous"					\
-		: "=r" (err)					\
-		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
-
-#define __put_user_asm2(x, addr, err)				\
-	__asm__ __volatile__(					\
-		"1:	stw %1,0(%2)\n"				\
-		"2:	stw %1+1,4(%2)\n"			\
-		"3:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		"4:	li %0,%3\n"				\
-		"	b 3b\n"					\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		"	.align 2\n"				\
-		"	.long 1b,4b\n"				\
-		"	.long 2b,4b\n"				\
-		".previous"					\
-		: "=r" (err)					\
-		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
-
-#define __get_user_nocheck(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	unsigned long __gu_val;					\
-	__chk_user_ptr(ptr);					\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user64_nocheck(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	long long __gu_val;					\
-	__chk_user_ptr(ptr);					\
-	__get_user_size64(__gu_val, (ptr), (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x, ptr, size)					\
-({									\
-	long __gu_err = -EFAULT;					\
-	unsigned long  __gu_val = 0;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
-	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
-		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-	__gu_err;							\
-})
-
-#define __get_user64_check(x, ptr, size)				  \
-({									  \
-	long __gu_err = -EFAULT;					  \
-	long long __gu_val = 0;						  \
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		  \
-	if (access_ok(VERIFY_READ, __gu_addr, (size)))			  \
-		__get_user_size64(__gu_val, __gu_addr, (size), __gu_err); \
-	(x) = (__typeof__(*(ptr)))__gu_val;				  \
-	__gu_err;							  \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		__get_user_asm(x, ptr, retval, "lbz");		\
-		break;						\
-	case 2:							\
-		__get_user_asm(x, ptr, retval, "lhz");		\
-		break;						\
-	case 4:							\
-		__get_user_asm(x, ptr, retval, "lwz");		\
-		break;						\
-	default:						\
-		x = __get_user_bad();				\
-	}							\
-} while (0)
-
-#define __get_user_size64(x, ptr, size, retval)			\
-do {								\
-	retval = 0;						\
-	switch (size) {						\
-	case 1:							\
-		__get_user_asm(x, ptr, retval, "lbz");		\
-		break;						\
-	case 2:							\
-		__get_user_asm(x, ptr, retval, "lhz");		\
-		break;						\
-	case 4:							\
-		__get_user_asm(x, ptr, retval, "lwz");		\
-		break;						\
-	case 8:							\
-		__get_user_asm2(x, ptr, retval);		\
-		break;						\
-	default:						\
-		x = __get_user_bad();				\
-	}							\
-} while (0)
-
-#define __get_user_asm(x, addr, err, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %1,0(%2)\n"		\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,%3\n"			\
-		"	li %1,0\n"			\
-		"	b 2b\n"				\
-		".previous\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".previous"				\
-		: "=r"(err), "=r"(x)			\
-		: "b"(addr), "i"(-EFAULT), "0"(err))
-
-#define __get_user_asm2(x, addr, err)			\
-	__asm__ __volatile__(				\
-		"1:	lwz %1,0(%2)\n"			\
-		"2:	lwz %1+1,4(%2)\n"		\
-		"3:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"4:	li %0,%3\n"			\
-		"	li %1,0\n"			\
-		"	li %1+1,0\n"			\
-		"	b 3b\n"				\
-		".previous\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,4b\n"			\
-		"	.long 2b,4b\n"			\
-		".previous"				\
-		: "=r"(err), "=&r"(x)			\
-		: "b"(addr), "i"(-EFAULT), "0"(err))
-
-/* more complex routines */
-
-extern int __copy_tofrom_user(void __user *to, const void __user *from,
-			      unsigned long size);
-
-extern inline unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	unsigned long over;
-
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_tofrom_user((__force void __user *)to, from, n);
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + n - TASK_SIZE;
-		return __copy_tofrom_user((__force void __user *)to, from, n - over) + over;
-	}
-	return n;
-}
-
-extern inline unsigned long
-copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	unsigned long over;
-
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __copy_tofrom_user(to, (__force void __user *) from, n);
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + n - TASK_SIZE;
-		return __copy_tofrom_user(to, (__force void __user *) from, n - over) + over;
-	}
-	return n;
-}
-
-static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long size)
-{
-	return __copy_tofrom_user((__force void __user *)to, from, size);
-}
-
-static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long size)
-{
-	return __copy_tofrom_user(to, (__force void __user *)from, size);
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
-
-extern inline unsigned long
-clear_user(void __user *addr, unsigned long size)
-{
-	if (access_ok(VERIFY_WRITE, addr, size))
-		return __clear_user(addr, size);
-	if ((unsigned long)addr < TASK_SIZE) {
-		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-		return __clear_user(addr, size - over) + over;
-	}
-	return size;
-}
-
-extern int __strncpy_from_user(char *dst, const char __user *src, long count);
-
-extern inline long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	if (access_ok(VERIFY_READ, src, 1))
-		return __strncpy_from_user(dst, src, count);
-	return -EFAULT;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 for error
- */
-
-extern int __strnlen_user(const char __user *str, long len, unsigned long top);
-
-/*
- * Returns the length of the string at str (including the null byte),
- * or 0 if we hit a page we can't access,
- * or something > len if we didn't find a null byte.
- *
- * The `top' parameter to __strnlen_user is to make sure that
- * we can never overflow from the user area into kernel space.
- */
-extern __inline__ int strnlen_user(const char __user *str, long len)
-{
-	unsigned long top = current->thread.fs.seg;
-
-	if ((unsigned long)str > top)
-		return 0;
-	return __strnlen_user(str, len, top);
-}
-
-#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
-
-#endif  /* __ASSEMBLY__ */
-
-#endif	/* _PPC_UACCESS_H */
-#endif /* __KERNEL__ */
diff --git a/include/asm-ppc64/uaccess.h b/include/asm-ppc64/uaccess.h
deleted file mode 100644
index 132c1276547b..000000000000
--- a/include/asm-ppc64/uaccess.h
+++ /dev/null
@@ -1,341 +0,0 @@
-#ifndef _PPC64_UACCESS_H
-#define _PPC64_UACCESS_H
-
-/* 
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASSEMBLY__
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <asm/processor.h>
-
-#define VERIFY_READ	0
-#define VERIFY_WRITE	1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
-
-#define KERNEL_DS	MAKE_MM_SEG(0UL)
-#define USER_DS		MAKE_MM_SEG(0xf000000000000000UL)
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current->thread.fs)
-#define set_fs(val)	(current->thread.fs = (val))
-
-#define segment_eq(a,b)	((a).seg == (b).seg)
-
-/*
- * Use the alpha trick for checking ranges:
- *
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- *
- * We dont have to check for high bits in (addr+size) because the first
- * two checks force the maximum result to be below the start of the
- * kernel region.
- */
-#define __access_ok(addr,size,segment) \
-	(((segment).seg & (addr | size )) == 0)
-
-#define access_ok(type,addr,size) \
-	__access_ok(((__force unsigned long)(addr)),(size),get_fs())
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * These are the main single-value transfer routines.  They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- *
- * As we use the same address space for kernel and user data on the
- * PowerPC, we can just do these as direct assignments.  (Of course, the
- * exception handling means that it's no longer "just"...)
- */
-#define get_user(x,ptr) \
-  __get_user_check((x),(ptr),sizeof(*(ptr)))
-#define put_user(x,ptr) \
-  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
-#define __get_user(x,ptr) \
-  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __put_user(x,ptr) \
-  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-extern long __put_user_bad(void);
-
-#define __put_user_nocheck(x,ptr,size)				\
-({								\
-	long __pu_err;						\
-	might_sleep();						\
-	__chk_user_ptr(ptr);					\
-	__put_user_size((x),(ptr),(size),__pu_err,-EFAULT);	\
-	__pu_err;						\
-})
-
-#define __put_user_check(x,ptr,size)					\
-({									\
-	long __pu_err = -EFAULT;					\
-	void __user *__pu_addr = (ptr);					\
-	might_sleep();							\
-	if (access_ok(VERIFY_WRITE,__pu_addr,size))			\
-		__put_user_size((x),__pu_addr,(size),__pu_err,-EFAULT);	\
-	__pu_err;							\
-})
-
-#define __put_user_size(x,ptr,size,retval,errret)			\
-do {									\
-	retval = 0;							\
-	switch (size) {							\
-	  case 1: __put_user_asm(x,ptr,retval,"stb",errret); break;	\
-	  case 2: __put_user_asm(x,ptr,retval,"sth",errret); break;	\
-	  case 4: __put_user_asm(x,ptr,retval,"stw",errret); break;	\
-	  case 8: __put_user_asm(x,ptr,retval,"std",errret); break; 	\
-	  default: __put_user_bad();					\
-	}								\
-} while (0)
-
-/*
- * We don't tell gcc that we are accessing memory, but this is OK
- * because we do not write to any memory gcc knows about, so there
- * are no aliasing issues.
- */
-#define __put_user_asm(x, addr, err, op, errret)		\
-	__asm__ __volatile__(					\
-		"1:	"op" %1,0(%2)  	# put_user\n" 	 	\
-		"2:\n"						\
-		".section .fixup,\"ax\"\n"			\
-		"3:	li %0,%3\n"				\
-		"	b 2b\n"					\
-		".previous\n"					\
-		".section __ex_table,\"a\"\n"			\
-		"	.align 3\n"				\
-		"	.llong 1b,3b\n"				\
-		".previous"					\
-		: "=r"(err)					\
-		: "r"(x), "b"(addr), "i"(errret), "0"(err))
-
-
-#define __get_user_nocheck(x,ptr,size)				\
-({								\
-	long __gu_err;						\
-	unsigned long __gu_val;					\
-	might_sleep();						\
-	__get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\
-	(x) = (__typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-
-#define __get_user_check(x,ptr,size)					\
-({									\
-	long __gu_err = -EFAULT;					\
-	unsigned long __gu_val = 0;					\
-	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
-	might_sleep();							\
-	if (access_ok(VERIFY_READ,__gu_addr,size))			\
-		__get_user_size(__gu_val,__gu_addr,(size),__gu_err,-EFAULT);\
-	(x) = (__typeof__(*(ptr)))__gu_val;				\
-	__gu_err;							\
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x,ptr,size,retval,errret)			\
-do {									\
-	retval = 0;							\
-	__chk_user_ptr(ptr);						\
-	switch (size) {							\
-	  case 1: __get_user_asm(x,ptr,retval,"lbz",errret); break;	\
-	  case 2: __get_user_asm(x,ptr,retval,"lhz",errret); break;	\
-	  case 4: __get_user_asm(x,ptr,retval,"lwz",errret); break;	\
-	  case 8: __get_user_asm(x,ptr,retval,"ld",errret);  break;	\
-	  default: (x) = __get_user_bad();				\
-	}								\
-} while (0)
-
-#define __get_user_asm(x, addr, err, op, errret)	\
-	__asm__ __volatile__(				\
-		"1:	"op" %1,0(%2)	# get_user\n"  	\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,%3\n"			\
-		"	li %1,0\n"			\
-		"	b 2b\n"				\
-		".previous\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 3\n"			\
-		"	.llong 1b,3b\n"			\
-		".previous"				\
-		: "=r"(err), "=r"(x)			\
-		: "b"(addr), "i"(errret), "0"(err))
-
-/* more complex routines */
-
-extern unsigned long __copy_tofrom_user(void __user *to, const void __user *from,
-					unsigned long size);
-
-static inline unsigned long
-__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
-{
-	if (__builtin_constant_p(n)) {
-		unsigned long ret;
-
-		switch (n) {
-		case 1:
-			__get_user_size(*(u8 *)to, from, 1, ret, 1);
-			return ret;
-		case 2:
-			__get_user_size(*(u16 *)to, from, 2, ret, 2);
-			return ret;
-		case 4:
-			__get_user_size(*(u32 *)to, from, 4, ret, 4);
-			return ret;
-		case 8:
-			__get_user_size(*(u64 *)to, from, 8, ret, 8);
-			return ret;
-		}
-	}
-	return __copy_tofrom_user((__force void __user *) to, from, n);
-}
-
-static inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	might_sleep();
-	return __copy_from_user_inatomic(to, from, n);
-}
-
-static inline unsigned long
-__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
-{
-	if (__builtin_constant_p(n)) {
-		unsigned long ret;
-
-		switch (n) {
-		case 1:
-			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1);
-			return ret;
-		case 2:
-			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2);
-			return ret;
-		case 4:
-			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4);
-			return ret;
-		case 8:
-			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret, 8);
-			return ret;
-		}
-	}
-	return __copy_tofrom_user(to, (__force const void __user *) from, n);
-}
-
-static inline unsigned long
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	might_sleep();
-	return __copy_to_user_inatomic(to, from, n);
-}
-
-#define __copy_in_user(to, from, size) \
-	__copy_tofrom_user((to), (from), (size))
-
-extern unsigned long copy_from_user(void *to, const void __user *from,
-				    unsigned long n);
-extern unsigned long copy_to_user(void __user *to, const void *from,
-				  unsigned long n);
-extern unsigned long copy_in_user(void __user *to, const void __user *from,
-				  unsigned long n);
-
-extern unsigned long __clear_user(void __user *addr, unsigned long size);
-
-static inline unsigned long
-clear_user(void __user *addr, unsigned long size)
-{
-	might_sleep();
-	if (likely(access_ok(VERIFY_WRITE, addr, size)))
-		size = __clear_user(addr, size);
-	return size;
-}
-
-extern int __strncpy_from_user(char *dst, const char __user *src, long count);
-
-static inline long
-strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	might_sleep();
-	if (likely(access_ok(VERIFY_READ, src, 1)))
-		return __strncpy_from_user(dst, src, count);
-	return -EFAULT;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 for error
- */
-extern int __strnlen_user(const char __user *str, long len);
-
-/*
- * Returns the length of the string at str (including the null byte),
- * or 0 if we hit a page we can't access,
- * or something > len if we didn't find a null byte.
- */
-static inline int strnlen_user(const char __user *str, long len)
-{
-	might_sleep();
-	if (likely(access_ok(VERIFY_READ, str, 1)))
-		return __strnlen_user(str, len);
-	return 0;
-}
-
-#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
-
-#endif  /* __ASSEMBLY__ */
-
-#endif	/* _PPC64_UACCESS_H */