Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add enhanced Downstream Port Containment support, which prints more
   details about Root Port Programmed I/O errors (Dongdong Liu)

 - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang)

 - add MediaTek MT2712 and MT7622 support (Ryder Lee)

 - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang)

 - add Qualcom IPQ8074 support (Varadarajan Narayanan)

 - add R-Car r8a7743/5 device tree support (Biju Das)

 - add Rockchip per-lane PHY support for better power management (Shawn
   Lin)

 - fix IRQ mapping for hot-added devices by replacing the
   pci_fixup_irqs() boot-time design with a host bridge hook called at
   probe-time (Lorenzo Pieralisi, Matthew Minter)

 - fix race when enabling two devices that results in upstream bridge
   not being enabled correctly (Srinath Mannam)

 - fix pciehp power fault infinite loop (Keith Busch)

 - fix SHPC bridge MSI hotplug events by enabling bus mastering
   (Aleksandr Bezzubikov)

 - fix a VFIO issue by correcting PCIe capability sizes (Alex
   Williamson)

 - fix an INTD issue on Xilinx and possibly other drivers by unifying
   INTx IRQ domain support (Paul Burton)

 - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg
   Roedel)

 - allow APM X-Gene device assignment to guests by adding an ACS quirk
   (Feng Kan)

 - fix driver crashes by disabling Extended Tags on Broadcom HT2100
   (Extended Tags support is required for PCIe Receivers but not
   Requesters, and we now enable them by default when Requesters support
   them) (Sinan Kaya)

 - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs
   use the real Requester ID (not a phantom RID) (Robin Murphy)

 - prevent assignment of Intel VMD children to guests (which may be
   supported eventually, but isn't yet) by not associating an IOMMU with
   them (Jon Derrick)

 - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott
   Bauer)

 - fix a Function-Level Reset issue with Intel 750 NVMe by waiting
   longer (up to 60sec instead of 1sec) for device to become ready
   (Sinan Kaya)

 - fix a Function-Level Reset issue on iProc Stingray by working around
   hardware defects in the CRS implementation (Oza Pawandeep)

 - fix an issue with Intel NVMe P3700 after an iProc reset by adding a
   delay during shutdown (Oza Pawandeep)

 - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking
   in compose_msi_msg() (Stephen Hemminger)

 - fix a wireless LAN driver timeout by clearing DesignWare MSI
   interrupt status after it is handled, not before (Faiz Abbas)

 - fix DesignWare ATU enable checking (Jisheng Zhang)

 - reduce Layerscape dependencies on the bootloader by doing more
   initialization in the driver (Hou Zhiqiang)

 - improve Intel VMD performance allowing allocation of more IRQ vectors
   than present CPUs (Keith Busch)

 - improve endpoint framework support for initial DMA mask, different
   BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon
   Vijay Abraham I, Stan Drozd)

 - rework CRS support to add periodic messages while we poll during
   enumeration and after Function-Level Reset and prepare for possible
   other uses of CRS (Sinan Kaya)

 - clean up Root Port AER handling by removing unnecessary code and
   moving error handler methods to struct pcie_port_service_driver
   (Christoph Hellwig)

 - clean up error handling paths in various drivers (Bjorn Andersson,
   Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen,
   Lorenzo Pieralisi, Sergei Shtylyov)

 - clean up SR-IOV resource handling by disabling VF decoding before
   updating the corresponding resource structs (Gavin Shan)

 - clean up DesignWare-based drivers by unifying quirks to update Class
   Code and Interrupt Pin and related handling of write-protected
   registers (Hou Zhiqiang)

 - clean up by adding empty generic pcibios_align_resource() and
   pcibios_fixup_bus() and removing empty arch-specific implementations
   (Palmer Dabbelt)

 - request exclusive reset control for several drivers to allow cleanup
   elsewhere (Philipp Zabel)

 - constify various structures (Arvind Yadav, Bhumika Goyal)

 - convert from full_name() to %pOF (Rob Herring)

 - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn
   Lin)

* tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits)
  PCI: xgene: Clean up whitespace
  PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset
  PCI: xgene: Fix platform_get_irq() error handling
  PCI: xilinx-nwl: Fix platform_get_irq() error handling
  PCI: rockchip: Fix platform_get_irq() error handling
  PCI: altera: Fix platform_get_irq() error handling
  PCI: spear13xx: Fix platform_get_irq() error handling
  PCI: artpec6: Fix platform_get_irq() error handling
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: exynos: Fix platform_get_irq() error handling
  PCI: iproc: Clean up whitespace
  PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP
  PCI: iproc: Add 500ms delay during device shutdown
  PCI: Fix typos and whitespace errors
  PCI: Remove unused "res" variable from pci_resource_io()
  PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag()
  PCI/AER: Reformat AER register definitions
  iommu/vt-d: Prevent VMD child devices from being remapping targets
  x86/PCI: Use is_vmd() rather than relying on the domain number
  ...

6 files changed, 96 insertions, 38 deletions

diff --git a/include/linux/aer.h b/include/linux/aer.h
index 04602cbe85dc..43799bd17a02 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -39,7 +39,7 @@ struct aer_capability_regs {
 };
 
 #if defined(CONFIG_PCIEAER)
-/* pci-e port driver needs this function to enable aer */
+/* PCIe port driver needs this function to enable AER */
 int pci_enable_pcie_error_reporting(struct pci_dev *dev);
 int pci_disable_pcie_error_reporting(struct pci_dev *dev);
 int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
@@ -67,7 +67,6 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
 		    struct aer_capability_regs *aer);
 int cper_severity_to_aer(int cper_severity);
 void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
-		       int severity,
-		       struct aer_capability_regs *aer_regs);
+		       int severity, struct aer_capability_regs *aer_regs);
 #endif //_AER_H_
 
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index af5edbf3eea3..f7a04e1af112 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -62,11 +62,13 @@ struct pci_epc_ops {
  * @size: the size of the PCI address space
  * @bitmap: bitmap to manage the PCI address space
  * @pages: number of bits representing the address region
+ * @page_size: size of each page
  */
 struct pci_epc_mem {
 	phys_addr_t	phys_base;
 	size_t		size;
 	unsigned long	*bitmap;
+	size_t		page_size;
 	int		pages;
 };
 
@@ -98,6 +100,9 @@ struct pci_epc {
 #define devm_pci_epc_create(dev, ops)    \
 		__devm_pci_epc_create((dev), (ops), THIS_MODULE)
 
+#define pci_epc_mem_init(epc, phys_addr, size)	\
+		__pci_epc_mem_init((epc), (phys_addr), (size), PAGE_SIZE)
+
 static inline void epc_set_drvdata(struct pci_epc *epc, void *data)
 {
 	dev_set_drvdata(&epc->dev, data);
@@ -135,7 +140,8 @@ void pci_epc_stop(struct pci_epc *epc);
 struct pci_epc *pci_epc_get(const char *epc_name);
 void pci_epc_put(struct pci_epc *epc);
 
-int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_addr, size_t size);
+int __pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_addr, size_t size,
+		       size_t page_size);
 void pci_epc_mem_exit(struct pci_epc *epc);
 void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
 				     phys_addr_t *phys_addr, size_t size);
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 0d529cb90143..60d551a9a1ba 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -14,17 +14,10 @@
 
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
+#include <linux/pci.h>
 
 struct pci_epf;
 
-enum pci_interrupt_pin {
-	PCI_INTERRUPT_UNKNOWN,
-	PCI_INTERRUPT_INTA,
-	PCI_INTERRUPT_INTB,
-	PCI_INTERRUPT_INTC,
-	PCI_INTERRUPT_INTD,
-};
-
 enum pci_barno {
 	BAR_0,
 	BAR_1,
@@ -149,6 +142,8 @@ static inline void *epf_get_drvdata(struct pci_epf *epf)
 	return dev_get_drvdata(&epf->dev);
 }
 
+const struct pci_epf_device_id *
+pci_epf_match_device(const struct pci_epf_device_id *id, struct pci_epf *epf);
 struct pci_epf *pci_epf_create(const char *name);
 void pci_epf_destroy(struct pci_epf *epf);
 int __pci_epf_register_driver(struct pci_epf_driver *driver,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index da05e5db06ac..f68c58a93dd0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -102,6 +102,28 @@ enum {
 	DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
 };
 
+/**
+ * enum pci_interrupt_pin - PCI INTx interrupt values
+ * @PCI_INTERRUPT_UNKNOWN: Unknown or unassigned interrupt
+ * @PCI_INTERRUPT_INTA: PCI INTA pin
+ * @PCI_INTERRUPT_INTB: PCI INTB pin
+ * @PCI_INTERRUPT_INTC: PCI INTC pin
+ * @PCI_INTERRUPT_INTD: PCI INTD pin
+ *
+ * Corresponds to values for legacy PCI INTx interrupts, as can be found in the
+ * PCI_INTERRUPT_PIN register.
+ */
+enum pci_interrupt_pin {
+	PCI_INTERRUPT_UNKNOWN,
+	PCI_INTERRUPT_INTA,
+	PCI_INTERRUPT_INTB,
+	PCI_INTERRUPT_INTC,
+	PCI_INTERRUPT_INTD,
+};
+
+/* The number of legacy PCI INTx interrupts */
+#define PCI_NUM_INTX	4
+
 /*
  * pci_power_t values must match the bits in the Capabilities PME_Support
  * and Control/Status PowerState fields in the Power Management capability.
@@ -453,6 +475,7 @@ struct pci_host_bridge {
 	void *release_data;
 	struct msi_controller *msi;
 	unsigned int ignore_reset_delay:1;	/* for entire hierarchy */
+	unsigned int no_ext_tags:1;		/* no Extended Tags */
 	/* Resource alignment requirements */
 	resource_size_t (*align_resource)(struct pci_dev *dev,
 			const struct resource *res,
@@ -847,7 +870,6 @@ char *pcibios_setup(char *str);
 resource_size_t pcibios_align_resource(void *, const struct resource *,
 				resource_size_t,
 				resource_size_t);
-void pcibios_update_irq(struct pci_dev *, int irq);
 
 /* Weak but can be overriden by arch */
 void pci_fixup_cardbus(struct pci_bus *);
@@ -1165,8 +1187,6 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus);
 void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus);
 void pdev_enable_device(struct pci_dev *);
 int pci_enable_resources(struct pci_dev *, int mask);
-void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
-		    int (*)(const struct pci_dev *, u8, u8));
 void pci_assign_irq(struct pci_dev *dev);
 struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res);
 #define HAVE_PCI_REQ_REGIONS	2
@@ -1399,6 +1419,38 @@ pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
 					      NULL);
 }
 
+/**
+ * pci_irqd_intx_xlate() - Translate PCI INTx value to an IRQ domain hwirq
+ * @d: the INTx IRQ domain
+ * @node: the DT node for the device whose interrupt we're translating
+ * @intspec: the interrupt specifier data from the DT
+ * @intsize: the number of entries in @intspec
+ * @out_hwirq: pointer at which to write the hwirq number
+ * @out_type: pointer at which to write the interrupt type
+ *
+ * Translate a PCI INTx interrupt number from device tree in the range 1-4, as
+ * stored in the standard PCI_INTERRUPT_PIN register, to a value in the range
+ * 0-3 suitable for use in a 4 entry IRQ domain. That is, subtract one from the
+ * INTx value to obtain the hwirq number.
+ *
+ * Returns 0 on success, or -EINVAL if the interrupt specifier is out of range.
+ */
+static inline int pci_irqd_intx_xlate(struct irq_domain *d,
+				      struct device_node *node,
+				      const u32 *intspec,
+				      unsigned int intsize,
+				      unsigned long *out_hwirq,
+				      unsigned int *out_type)
+{
+	const u32 intx = intspec[0];
+
+	if (intx < PCI_INTERRUPT_INTA || intx > PCI_INTERRUPT_INTD)
+		return -EINVAL;
+
+	*out_hwirq = intx - PCI_INTERRUPT_INTA;
+	return 0;
+}
+
 #ifdef CONFIG_PCIEPORTBUS
 extern bool pcie_ports_disabled;
 extern bool pcie_ports_auto;
@@ -2064,7 +2116,7 @@ static inline u16 pci_vpd_lrdt_tag(const u8 *lrdt)
 
 /**
  * pci_vpd_srdt_size - Extracts the Small Resource Data Type length
- * @lrdt: Pointer to the beginning of the Small Resource Data Type tag
+ * @srdt: Pointer to the beginning of the Small Resource Data Type tag
  *
  * Returns the extracted Small Resource Data Type length.
  */
@@ -2075,7 +2127,7 @@ static inline u8 pci_vpd_srdt_size(const u8 *srdt)
 
 /**
  * pci_vpd_srdt_tag - Extracts the Small Resource Data Type Tag Item
- * @lrdt: Pointer to the beginning of the Small Resource Data Type tag
+ * @srdt: Pointer to the beginning of the Small Resource Data Type tag
  *
  * Returns the extracted Small Resource Data Type Tag Item.
  */
diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h
index afcd130ab3a9..e8f3f7479224 100644
--- a/include/linux/pcieport_if.h
+++ b/include/linux/pcieport_if.h
@@ -38,7 +38,7 @@ static inline void set_service_data(struct pcie_device *dev, void *data)
 	dev->priv_data = data;
 }
 
-static inline void* get_service_data(struct pcie_device *dev)
+static inline void *get_service_data(struct pcie_device *dev)
 {
 	return dev->priv_data;
 }
@@ -50,8 +50,8 @@ struct pcie_port_service_driver {
 	int (*suspend) (struct pcie_device *dev);
 	int (*resume) (struct pcie_device *dev);
 
-	/* Service Error Recovery Handler */
-	const struct pci_error_handlers *err_handler;
+	/* Device driver may resume normal operations */
+	void (*error_resume)(struct pci_dev *dev);
 
 	/* Link Reset Capability - AER service driver specific */
 	pci_ers_result_t (*reset_link) (struct pci_dev *dev);
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index c22d3ebaca20..f8d58045926f 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -513,6 +513,7 @@
 #define  PCI_EXP_DEVSTA_URD	0x0008	/* Unsupported Request Detected */
 #define  PCI_EXP_DEVSTA_AUXPD	0x0010	/* AUX Power Detected */
 #define  PCI_EXP_DEVSTA_TRPND	0x0020	/* Transactions Pending */
+#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1	12	/* v1 endpoints without link end here */
 #define PCI_EXP_LNKCAP		12	/* Link Capabilities */
 #define  PCI_EXP_LNKCAP_SLS	0x0000000f /* Supported Link Speeds */
 #define  PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
@@ -556,7 +557,7 @@
 #define  PCI_EXP_LNKSTA_DLLLA	0x2000	/* Data Link Layer Link Active */
 #define  PCI_EXP_LNKSTA_LBMS	0x4000	/* Link Bandwidth Management Status */
 #define  PCI_EXP_LNKSTA_LABS	0x8000	/* Link Autonomous Bandwidth Status */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1	20	/* v1 endpoints end here */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1	20	/* v1 endpoints with link end here */
 #define PCI_EXP_SLTCAP		20	/* Slot Capabilities */
 #define  PCI_EXP_SLTCAP_ABP	0x00000001 /* Attention Button Present */
 #define  PCI_EXP_SLTCAP_PCP	0x00000002 /* Power Controller Present */
@@ -639,7 +640,7 @@
 #define  PCI_EXP_DEVCTL2_OBFF_MSGB_EN	0x4000	/* Enable OBFF Message type B */
 #define  PCI_EXP_DEVCTL2_OBFF_WAKE_EN	0x6000	/* OBFF using WAKE# signaling */
 #define PCI_EXP_DEVSTA2		42	/* Device Status 2 */
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	44	/* v2 endpoints end here */
+#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2	44	/* v2 endpoints without link end here */
 #define PCI_EXP_LNKCAP2		44	/* Link Capabilities 2 */
 #define  PCI_EXP_LNKCAP2_SLS_2_5GB	0x00000002 /* Supported Speed 2.5GT/s */
 #define  PCI_EXP_LNKCAP2_SLS_5_0GB	0x00000004 /* Supported Speed 5.0GT/s */
@@ -647,6 +648,7 @@
 #define  PCI_EXP_LNKCAP2_CROSSLINK	0x00000100 /* Crosslink supported */
 #define PCI_EXP_LNKCTL2		48	/* Link Control 2 */
 #define PCI_EXP_LNKSTA2		50	/* Link Status 2 */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2	52	/* v2 endpoints with link end here */
 #define PCI_EXP_SLTCAP2		52	/* Slot Capabilities 2 */
 #define PCI_EXP_SLTCTL2		56	/* Slot Control 2 */
 #define PCI_EXP_SLTSTA2		58	/* Slot Status 2 */
@@ -733,23 +735,17 @@
 #define  PCI_ERR_CAP_ECRC_CHKE	0x00000100	/* ECRC Check Enable */
 #define PCI_ERR_HEADER_LOG	28	/* Header Log Register (16 bytes) */
 #define PCI_ERR_ROOT_COMMAND	44	/* Root Error Command */
-/* Correctable Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001
-/* Non-fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002
-/* Fatal Err Reporting Enable */
-#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004
+#define PCI_ERR_ROOT_CMD_COR_EN		0x00000001 /* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN	0x00000002 /* Non-Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN	0x00000004 /* Fatal Err Reporting Enable */
 #define PCI_ERR_ROOT_STATUS	48
-#define PCI_ERR_ROOT_COR_RCV		0x00000001	/* ERR_COR Received */
-/* Multi ERR_COR Received */
-#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002
-/* ERR_FATAL/NONFATAL Received */
-#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004
-/* Multi ERR_FATAL/NONFATAL Received */
-#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008
-#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010	/* First Fatal */
-#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020	/* Non-Fatal Received */
-#define PCI_ERR_ROOT_FATAL_RCV		0x00000040	/* Fatal Received */
+#define PCI_ERR_ROOT_COR_RCV		0x00000001 /* ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV	0x00000002 /* Multiple ERR_COR */
+#define PCI_ERR_ROOT_UNCOR_RCV		0x00000004 /* ERR_FATAL/NONFATAL */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV	0x00000008 /* Multiple FATAL/NONFATAL */
+#define PCI_ERR_ROOT_FIRST_FATAL	0x00000010 /* First UNC is Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV	0x00000020 /* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV		0x00000040 /* Fatal Received */
 #define PCI_ERR_ROOT_ERR_SRC	52	/* Error Source Identification */
 
 /* Virtual Channel */
@@ -967,6 +963,7 @@
 #define  PCI_EXP_DPC_CAP_RP_EXT		0x20	/* Root Port Extensions for DPC */
 #define  PCI_EXP_DPC_CAP_POISONED_TLP	0x40	/* Poisoned TLP Egress Blocking Supported */
 #define  PCI_EXP_DPC_CAP_SW_TRIGGER	0x80	/* Software Triggering Supported */
+#define  PCI_EXP_DPC_RP_PIO_LOG_SIZE	0xF00	/* RP PIO log size */
 #define  PCI_EXP_DPC_CAP_DL_ACTIVE	0x1000	/* ERR_COR signal on DL_Active supported */
 
 #define PCI_EXP_DPC_CTL			6	/* DPC control */
@@ -980,6 +977,15 @@
 
 #define PCI_EXP_DPC_SOURCE_ID		10	/* DPC Source Identifier */
 
+#define PCI_EXP_DPC_RP_PIO_STATUS	 0x0C	/* RP PIO Status */
+#define PCI_EXP_DPC_RP_PIO_MASK		 0x10	/* RP PIO MASK */
+#define PCI_EXP_DPC_RP_PIO_SEVERITY	 0x14	/* RP PIO Severity */
+#define PCI_EXP_DPC_RP_PIO_SYSERROR	 0x18	/* RP PIO SysError */
+#define PCI_EXP_DPC_RP_PIO_EXCEPTION	 0x1C	/* RP PIO Exception */
+#define PCI_EXP_DPC_RP_PIO_HEADER_LOG	 0x20	/* RP PIO Header Log */
+#define PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG	 0x30	/* RP PIO ImpSpec Log */
+#define PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG 0x34	/* RP PIO TLP Prefix Log */
+
 /* Precision Time Measurement */
 #define PCI_PTM_CAP			0x04	    /* PTM Capability */
 #define  PCI_PTM_CAP_REQ		0x00000001  /* Requester capable */