Merge tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl changes from Linus Walleij:
 "Some of this stuff is hitting arch/arm/* and have been ACKed by the
  ARM SoC folks, or it's device tree bindings pertaining to the specific
  driver.

  These are the bulk pinctrl changes for kernel v3.7:
   - Add subdrivers for the DB8540 and NHK8815 Nomadik-type ASICs,
     provide platform config for the Nomadik.
   - Add a driver for the i.MX35.
   - Add a driver for the BCM2835, an advanced GPIO expander.
   - Various fixes and clean-ups and minor improvements for the core,
     Nomadik, pinctr-single, sirf drivers.
   - Some platform config for the ux500."

* tag 'pinctrl-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (27 commits)
  pinctrl: add bcm2835 driver
  pinctrl: clarify idle vs sleep states
  pinctrl/nomadik: use irq_find_mapping()
  pinctrl: sirf: add lost chained_irq_enter and exit in sirfsoc_gpio_handle_irq
  pinctrl: sirf: initialize the irq_chip pointer of pinctrl_gpio_range
  pinctrl: sirf: fix spinlock deadlock in sirfsoc_gpio_set_input
  pinctrl: sirf: add missing pins to pinctrl list
  pinctrl: sirf: fix a typo in sirfsoc_gpio_probe
  pinctrl: pinctrl-single: add debugfs pin h/w state info
  ARM: ux500: 8500: update I2C sleep states pinctrl
  pinctrl: Fix potential memory leak in pinctrl_register_one_pin()
  ARM: ux500: tidy up pin sleep modes
  ARM: ux500: fix spi2 pin group
  pinctrl: imx: remove duplicated const
  pinctrl: document semantics vs GPIO
  ARM: ux500: 8500: use hsit_a_2 group for HSI
  pinctrl: use kasprintf() in pinmux_request_gpio()
  pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux
  pinctrl/nomadik : add MC1_a_2 pin MC1 function group list
  pinctrl: pinctrl-single: Make sure we do not change bits outside of mask
  ...

2 files changed, 11 insertions, 6 deletions

diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index e9b7f4350844..d2816454c263 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -140,7 +140,7 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select(
 	s = pinctrl_lookup_state(p, name);
 	if (IS_ERR(s)) {
 		devm_pinctrl_put(p);
-		return ERR_PTR(PTR_ERR(s));
+		return ERR_CAST(s);
 	}
 
 	ret = pinctrl_select_state(p, s);
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
index 634608dc6c89..b5919f8e6d1a 100644
--- a/include/linux/pinctrl/pinctrl-state.h
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -6,13 +6,18 @@
  * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
  *	into as default, usually this means the pins are up and ready to
  *	be used by the device driver. This state is commonly used by
- *	hogs to configure muxing and pins at boot.
+ *	hogs to configure muxing and pins at boot, and also as a state
+ *	to go into when returning from sleep and idle in
+ *	.pm_runtime_resume() or ordinary .resume() for example.
  * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
- *	when the pins are idle. Could typically be set from a
- *	pm_runtime_suspend() operation.
+ *	when the pins are idle. This is a state where the system is relaxed
+ *	but not fully sleeping - some power may be on but clocks gated for
+ *	example. Could typically be set from a pm_runtime_suspend() or
+ *	pm_runtime_idle() operation.
  * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
- *	when the pins are sleeping. Could typically be set from a
- *	common suspend() function.
+ *	when the pins are sleeping. This is a state where the system is in
+ *	its lowest sleep state. Could typically be set from an
+ *	ordinary .suspend() function.
  */
 #define PINCTRL_STATE_DEFAULT "default"
 #define PINCTRL_STATE_IDLE "idle"