bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT

This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select
a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY.  Like other
non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN.

BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern"
to store the bpf context instead of using the skb->cb[48].

At the SO_REUSEPORT sk lookup time, it is in the middle of transiting
from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp).  At this
point,  it is not always clear where the bpf context can be appended
in the skb->cb[48] to avoid saving-and-restoring cb[].  Even putting
aside the difference between ipv4-vs-ipv6 and udp-vs-tcp.  It is not
clear if the lower layer is only ipv4 and ipv6 in the future and
will it not touch the cb[] again before transiting to the upper
layer.

For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB
instead of IP[6]CB and it may still modify the cb[] after calling
the udp[46]_lib_lookup_skb().  Because of the above reason, if
sk->cb is used for the bpf ctx, saving-and-restoring is needed
and likely the whole 48 bytes cb[] has to be saved and restored.

Instead of saving, setting and restoring the cb[], this patch opts
to create a new "struct sk_reuseport_kern" and setting the needed
values in there.

The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)"
will serve all ipv4/ipv6 + udp/tcp combinations.  There is no protocol
specific usage at this point and it is also inline with the current
sock_reuseport.c implementation (i.e. no protocol specific requirement).

In "struct sk_reuseport_md", this patch exposes data/data_end/len
with semantic similar to other existing usages.  Together
with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()",
the bpf prog can peek anywhere in the skb.  The "bind_inany" tells
the bpf prog that the reuseport group is bind-ed to a local
INANY address which cannot be learned from skb.

The new "bind_inany" is added to "struct sock_reuseport" which will be
used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order
to avoid repeating the "bind INANY" test on
"sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run.  It can
only be properly initialized when a "sk->sk_reuseport" enabled sk is
adding to a hashtable (i.e. during "reuseport_alloc()" and
"reuseport_add_sock()").

The new "sk_select_reuseport()" is the main helper that the
bpf prog will use to select a SO_REUSEPORT sk.  It is the only function
that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY.  As mentioned in
the earlier patch, the validity of a selected sk is checked in
run time in "sk_select_reuseport()".  Doing the check in
verification time is difficult and inflexible (consider the map-in-map
use case).  The runtime check is to compare the selected sk's reuseport_id
with the reuseport_id that we want.  This helper will return -EXXX if the
selected sk cannot serve the incoming request (e.g. reuseport_id
not match).  The bpf prog can decide if it wants to do SK_DROP as its
discretion.

When the bpf prog returns SK_PASS, the kernel will check if a
valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL").
If it does , it will use the selected sk.  If not, the kernel
will select one from "reuse->socks[]" (as before this patch).

The SK_DROP and SK_PASS handling logic will be in the next patch.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

1 files changed, 35 insertions, 1 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 40f584bc7da0..3102a2a23c31 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -151,6 +151,7 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
 	BPF_PROG_TYPE_LWT_SEG6LOCAL,
 	BPF_PROG_TYPE_LIRC_MODE2,
+	BPF_PROG_TYPE_SK_REUSEPORT,
 };
 
 enum bpf_attach_type {
@@ -2114,6 +2115,14 @@ union bpf_attr {
  *		the shared data.
  *	Return
  *		Pointer to the local storage area.
+ *
+ * int bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
+ *	Description
+ *		Select a SO_REUSEPORT sk from a	BPF_MAP_TYPE_REUSEPORT_ARRAY map
+ *		It checks the selected sk is matching the incoming
+ *		request in the skb.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -2197,7 +2206,8 @@ union bpf_attr {
 	FN(rc_keydown),			\
 	FN(skb_cgroup_id),		\
 	FN(get_current_cgroup_id),	\
-	FN(get_local_storage),
+	FN(get_local_storage),		\
+	FN(sk_select_reuseport),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -2414,6 +2424,30 @@ struct sk_msg_md {
 	__u32 local_port;	/* stored in host byte order */
 };
 
+struct sk_reuseport_md {
+	/*
+	 * Start of directly accessible data. It begins from
+	 * the tcp/udp header.
+	 */
+	void *data;
+	void *data_end;		/* End of directly accessible data */
+	/*
+	 * Total length of packet (starting from the tcp/udp header).
+	 * Note that the directly accessible bytes (data_end - data)
+	 * could be less than this "len".  Those bytes could be
+	 * indirectly read by a helper "bpf_skb_load_bytes()".
+	 */
+	__u32 len;
+	/*
+	 * Eth protocol in the mac header (network byte order). e.g.
+	 * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD)
+	 */
+	__u32 eth_protocol;
+	__u32 ip_protocol;	/* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */
+	__u32 bind_inany;	/* Is sock bound to an INANY address? */
+	__u32 hash;		/* A hash of the packet 4 tuples */
+};
+
 #define BPF_TAG_SIZE	8
 
 struct bpf_prog_info {