summaryrefslogtreecommitdiff
path: root/include/net
diff options
context:
space:
mode:
authorJohn W. Linville <linville@tuxdriver.com>2013-08-09 15:08:10 -0400
committerJohn W. Linville <linville@tuxdriver.com>2013-08-09 15:08:10 -0400
commitfa5978447cb0144411df3a588e3d01459c12d855 (patch)
tree998e58c515def864c8cd87511625d1e7184a7a21 /include/net
parent2437f3c5d6bc07252c6d7d24448755e0c35ed91c (diff)
parent73da7d5bab79ad7e16ff44d67c3fe8b9c0b33e5b (diff)
Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Diffstat (limited to 'include/net')
-rw-r--r--include/net/cfg80211.h33
-rw-r--r--include/net/mac80211.h37
2 files changed, 70 insertions, 0 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index aeaf6dff6e05..b7495c72061c 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -666,6 +666,30 @@ struct cfg80211_ap_settings {
};
/**
+ * struct cfg80211_csa_settings - channel switch settings
+ *
+ * Used for channel switch
+ *
+ * @chandef: defines the channel to use after the switch
+ * @beacon_csa: beacon data while performing the switch
+ * @counter_offset_beacon: offset for the counter within the beacon (tail)
+ * @counter_offset_presp: offset for the counter within the probe response
+ * @beacon_after: beacon data to be used on the new channel
+ * @radar_required: whether radar detection is required on the new channel
+ * @block_tx: whether transmissions should be blocked while changing
+ * @count: number of beacons until switch
+ */
+struct cfg80211_csa_settings {
+ struct cfg80211_chan_def chandef;
+ struct cfg80211_beacon_data beacon_csa;
+ u16 counter_offset_beacon, counter_offset_presp;
+ struct cfg80211_beacon_data beacon_after;
+ bool radar_required;
+ bool block_tx;
+ u8 count;
+};
+
+/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
@@ -2139,6 +2163,8 @@ struct cfg80211_update_ft_ies_params {
* @crit_proto_stop: Indicates critical protocol no longer needs increased link
* reliability. This operation can not fail.
* @set_coalesce: Set coalesce parameters.
+ *
+ * @channel_switch: initiate channel-switch procedure (with CSA)
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2376,6 +2402,10 @@ struct cfg80211_ops {
struct wireless_dev *wdev);
int (*set_coalesce)(struct wiphy *wiphy,
struct cfg80211_coalesce *coalesce);
+
+ int (*channel_switch)(struct wiphy *wiphy,
+ struct net_device *dev,
+ struct cfg80211_csa_settings *params);
};
/*
@@ -2441,6 +2471,8 @@ struct cfg80211_ops {
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
* @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
+ * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in
+ * beaconing mode (AP, IBSS, Mesh, ...).
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -2465,6 +2497,7 @@ enum wiphy_flags {
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
+ WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23),
};
/**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3124036285eb..9cda3728c2cb 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -152,11 +152,14 @@ struct ieee80211_low_level_stats {
* @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
* @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
* @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed
+ * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel,
+ * this is used only with channel switching with CSA
*/
enum ieee80211_chanctx_change {
IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0),
IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1),
IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2),
+ IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3),
};
/**
@@ -1084,6 +1087,7 @@ enum ieee80211_vif_flags {
* @addr: address of this interface
* @p2p: indicates whether this AP or STA interface is a p2p
* interface, i.e. a GO or p2p-sta respectively
+ * @csa_active: marks whether a channel switch is going on
* @driver_flags: flags/capabilities the driver has for this interface,
* these need to be set (or cleared) when the interface is added
* or, if supported by the driver, the interface type is changed
@@ -1106,6 +1110,7 @@ struct ieee80211_vif {
struct ieee80211_bss_conf bss_conf;
u8 addr[ETH_ALEN];
bool p2p;
+ bool csa_active;
u8 cab_queue;
u8 hw_queue[IEEE80211_NUM_ACS];
@@ -2637,6 +2642,16 @@ enum ieee80211_roc_type {
* @ipv6_addr_change: IPv6 address assignment on the given interface changed.
* Currently, this is only called for managed or P2P client interfaces.
* This callback is optional; it must not sleep.
+ *
+ * @channel_switch_beacon: Starts a channel switch to a new channel.
+ * Beacons are modified to include CSA or ECSA IEs before calling this
+ * function. The corresponding count fields in these IEs must be
+ * decremented, and when they reach zero the driver must call
+ * ieee80211_csa_finish(). Drivers which use ieee80211_beacon_get()
+ * get the csa counter decremented by mac80211, but must check if it is
+ * zero using ieee80211_csa_is_complete() after the beacon has been
+ * transmitted and then call ieee80211_csa_finish().
+ *
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -2824,6 +2839,9 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct inet6_dev *idev);
#endif
+ void (*channel_switch_beacon)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_chan_def *chandef);
};
/**
@@ -3319,6 +3337,25 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
}
/**
+ * ieee80211_csa_finish - notify mac80211 about channel switch
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * After a channel switch announcement was scheduled and the counter in this
+ * announcement hit zero, this function must be called by the driver to
+ * notify mac80211 that the channel can be changed.
+ */
+void ieee80211_csa_finish(struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_csa_is_complete - find out if counters reached zero
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * This function returns whether the channel switch counters reached zero.
+ */
+bool ieee80211_csa_is_complete(struct ieee80211_vif *vif);
+
+
+/**
* ieee80211_proberesp_get - retrieve a Probe Response template
* @hw: pointer obtained from ieee80211_alloc_hw().
* @vif: &struct ieee80211_vif pointer from the add_interface callback.