Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem

2 files changed, 60 insertions, 0 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index eb2659aefd97..b42136a61f3a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -441,6 +441,10 @@ enum plink_actions {
  * @plink_action: plink action to take
  * @plink_state: set the peer link state for a station
  * @ht_capa: HT capabilities of station
+ * @uapsd_queues: bitmap of queues configured for uapsd. same format
+ *	as the AC bitmap in the QoS info field
+ * @max_sp: max Service Period. same format as the MAX_SP in the
+ *	QoS info field (but already shifted down)
  */
 struct station_parameters {
 	u8 *supported_rates;
@@ -876,6 +880,15 @@ struct cfg80211_scan_request {
 };
 
 /**
+ * struct cfg80211_match_set - sets of attributes to match
+ *
+ * @ssid: SSID to be matched
+ */
+struct cfg80211_match_set {
+	struct cfg80211_ssid ssid;
+};
+
+/**
  * struct cfg80211_sched_scan_request - scheduled scan request description
  *
  * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans)
@@ -884,6 +897,11 @@ struct cfg80211_scan_request {
  * @interval: interval between each scheduled scan cycle
  * @ie: optional information element(s) to add into Probe Request or %NULL
  * @ie_len: length of ie in octets
+ * @match_sets: sets of parameters to be matched for a scan result
+ * 	entry to be considered valid and to be passed to the host
+ * 	(others are filtered out).
+ *	If ommited, all results are passed.
+ * @n_match_sets: number of match sets
  * @wiphy: the wiphy this was for
  * @dev: the interface
  * @channels: channels to scan
@@ -895,6 +913,8 @@ struct cfg80211_sched_scan_request {
 	u32 interval;
 	const u8 *ie;
 	size_t ie_len;
+	struct cfg80211_match_set *match_sets;
+	int n_match_sets;
 
 	/* internal */
 	struct wiphy *wiphy;
@@ -1619,6 +1639,9 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
  *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
  * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
+ * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
+ *	firmware.
+ * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1633,6 +1656,8 @@ enum wiphy_flags {
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
 	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+	WIPHY_FLAG_SUPPORTS_FW_ROAM		= BIT(13),
+	WIPHY_FLAG_AP_UAPSD			= BIT(14),
 };
 
 /**
@@ -1789,6 +1814,8 @@ struct wiphy_wowlan_support {
  *	by default for perm_addr. In this case, the mask should be set to
  *	all-zeroes. In this case it is assumed that the device can handle
  *	the same number of arbitrary MAC addresses.
+ * @registered: protects ->resume and ->suspend sysfs callbacks against
+ *	unregister hardware
  * @debugfsdir: debugfs directory used for this wiphy, will be renamed
  *	automatically on wiphy renames
  * @dev: (virtual) struct device for this wiphy
@@ -1809,6 +1836,9 @@ struct wiphy_wowlan_support {
  *	any given scan
  * @max_sched_scan_ssids: maximum number of SSIDs the device can scan
  *	for in any given scheduled scan
+ * @max_match_sets: maximum number of match sets the device can handle
+ *	when performing a scheduled scan, 0 if filtering is not
+ *	supported.
  * @max_scan_ie_len: maximum length of user-controlled IEs device can
  *	add to probe request frames transmitted during a scan, must not
  *	include fixed IEs like supported rates
@@ -1866,6 +1896,7 @@ struct wiphy {
 	int bss_priv_size;
 	u8 max_scan_ssids;
 	u8 max_sched_scan_ssids;
+	u8 max_match_sets;
 	u16 max_scan_ie_len;
 	u16 max_sched_scan_ie_len;
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 2e752df57510..9edba09547e4 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -164,6 +164,7 @@ struct ieee80211_low_level_stats {
  * @BSS_CHANGED_QOS: QoS for this association was enabled/disabled. Note
  *	that it is only ever disabled for station mode.
  * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface.
+ * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -181,6 +182,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_ARP_FILTER		= 1<<12,
 	BSS_CHANGED_QOS			= 1<<13,
 	BSS_CHANGED_IDLE		= 1<<14,
+	BSS_CHANGED_SSID		= 1<<15,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -254,6 +256,9 @@ enum ieee80211_rssi_event {
  * @idle: This interface is idle. There's also a global idle flag in the
  *	hardware config which may be more appropriate depending on what
  *	your driver/device needs to do.
+ * @ssid: The SSID of the current vif. Only valid in AP-mode.
+ * @ssid_len: Length of SSID given in @ssid.
+ * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -280,6 +285,9 @@ struct ieee80211_bss_conf {
 	bool arp_filter_enabled;
 	bool qos;
 	bool idle;
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	size_t ssid_len;
+	bool hidden_ssid;
 };
 
 /**
@@ -947,6 +955,9 @@ enum set_key_cmd {
  * @wme: indicates whether the STA supports WME. Only valid during AP-mode.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
+ * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
+ *	if wme is supported.
+ * @max_sp: max Service Period. Only valid if wme is supported.
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1096,6 +1107,10 @@ enum sta_notify_cmd {
  *	stations based on the PM bit of incoming frames.
  *	Use ieee80211_start_ps()/ieee8021_end_ps() to manually configure
  *	the PS mode of connected stations.
+ *
+ * @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session
+ *	setup strictly in HW. mac80211 should not attempt to do this in
+ *	software.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1121,6 +1136,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_CQM_RSSI			= 1<<20,
 	IEEE80211_HW_SUPPORTS_PER_STA_GTK		= 1<<21,
 	IEEE80211_HW_AP_LINK_PS				= 1<<22,
+	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
 };
 
 /**
@@ -3220,6 +3236,19 @@ void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw);
 void ieee80211_stop_rx_ba_session(struct ieee80211_vif *vif, u16 ba_rx_bitmap,
 				  const u8 *addr);
 
+/**
+ * ieee80211_send_bar - send a BlockAckReq frame
+ *
+ * can be used to flush pending frames from the peer's aggregation reorder
+ * buffer.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @ra: the peer's destination address
+ * @tid: the TID of the aggregation session
+ * @ssn: the new starting sequence number for the receiver
+ */
+void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn);
+
 /* Rate control API */
 
 /**