[media] omap24xx/tcm825x: move to staging for future removal

The omap24xx driver and the tcm825x sensor driver are the only two
remaining drivers to still use the old deprecated v4l2-int-device API.

Nobody maintains these drivers anymore. But unfortunately the v4l2-int-device
API is used by out-of-tree drivers (MXC platform). This is a very bad situation
since as long as this deprecated API stays in the kernel there is no reason for
those out-of-tree drivers to convert.

This patch moves v4l2-int-device and the two drivers that depend on it to
staging in preparation for their removal.

If someone would be interested in getting these drivers to work, then start with
this since it's not very far from the state where they used to work:

<URL:http://vihersipuli.retiisi.org.uk/cgi-bin/gitweb.cgi?p=~sailus/linux-omap/.git;a=summary>

The branch is n800-cam. Porting to up-to-date APIs can then be done. David
might have done some work in that area, so check with him first.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: David Cohen <dacohen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 0 insertions, 305 deletions

diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h
deleted file mode 100644
index 0286c95814ff..000000000000
--- a/include/media/v4l2-int-device.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * include/media/v4l2-int-device.h
- *
- * V4L2 internal ioctl interface.
- *
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Sakari Ailus <sakari.ailus@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef V4L2_INT_DEVICE_H
-#define V4L2_INT_DEVICE_H
-
-#include <media/v4l2-common.h>
-
-#define V4L2NAMESIZE 32
-
-/*
- *
- * The internal V4L2 device interface core.
- *
- */
-
-enum v4l2_int_type {
-	v4l2_int_type_master = 1,
-	v4l2_int_type_slave
-};
-
-struct module;
-
-struct v4l2_int_device;
-
-struct v4l2_int_master {
-	int (*attach)(struct v4l2_int_device *slave);
-	void (*detach)(struct v4l2_int_device *slave);
-};
-
-typedef int (v4l2_int_ioctl_func)(struct v4l2_int_device *);
-typedef int (v4l2_int_ioctl_func_0)(struct v4l2_int_device *);
-typedef int (v4l2_int_ioctl_func_1)(struct v4l2_int_device *, void *);
-
-struct v4l2_int_ioctl_desc {
-	int num;
-	v4l2_int_ioctl_func *func;
-};
-
-struct v4l2_int_slave {
-	/* Don't touch master. */
-	struct v4l2_int_device *master;
-
-	char attach_to[V4L2NAMESIZE];
-
-	int num_ioctls;
-	struct v4l2_int_ioctl_desc *ioctls;
-};
-
-struct v4l2_int_device {
-	/* Don't touch head. */
-	struct list_head head;
-
-	struct module *module;
-
-	char name[V4L2NAMESIZE];
-
-	enum v4l2_int_type type;
-	union {
-		struct v4l2_int_master *master;
-		struct v4l2_int_slave *slave;
-	} u;
-
-	void *priv;
-};
-
-void v4l2_int_device_try_attach_all(void);
-
-int v4l2_int_device_register(struct v4l2_int_device *d);
-void v4l2_int_device_unregister(struct v4l2_int_device *d);
-
-int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd);
-int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg);
-
-/*
- *
- * Types and definitions for IOCTL commands.
- *
- */
-
-enum v4l2_power {
-	V4L2_POWER_OFF = 0,
-	V4L2_POWER_ON,
-	V4L2_POWER_STANDBY,
-};
-
-/* Slave interface type. */
-enum v4l2_if_type {
-	/*
-	 * Parallel 8-, 10- or 12-bit interface, used by for example
-	 * on certain image sensors.
-	 */
-	V4L2_IF_TYPE_BT656,
-};
-
-enum v4l2_if_type_bt656_mode {
-	/*
-	 * Modes without Bt synchronisation codes. Separate
-	 * synchronisation signal lines are used.
-	 */
-	V4L2_IF_TYPE_BT656_MODE_NOBT_8BIT,
-	V4L2_IF_TYPE_BT656_MODE_NOBT_10BIT,
-	V4L2_IF_TYPE_BT656_MODE_NOBT_12BIT,
-	/*
-	 * Use Bt synchronisation codes. The vertical and horizontal
-	 * synchronisation is done based on synchronisation codes.
-	 */
-	V4L2_IF_TYPE_BT656_MODE_BT_8BIT,
-	V4L2_IF_TYPE_BT656_MODE_BT_10BIT,
-};
-
-struct v4l2_if_type_bt656 {
-	/*
-	 * 0: Frame begins when vsync is high.
-	 * 1: Frame begins when vsync changes from low to high.
-	 */
-	unsigned frame_start_on_rising_vs:1;
-	/* Use Bt synchronisation codes for sync correction. */
-	unsigned bt_sync_correct:1;
-	/* Swap every two adjacent image data elements. */
-	unsigned swap:1;
-	/* Inverted latch clock polarity from slave. */
-	unsigned latch_clk_inv:1;
-	/* Hs polarity. 0 is active high, 1 active low. */
-	unsigned nobt_hs_inv:1;
-	/* Vs polarity. 0 is active high, 1 active low. */
-	unsigned nobt_vs_inv:1;
-	enum v4l2_if_type_bt656_mode mode;
-	/* Minimum accepted bus clock for slave (in Hz). */
-	u32 clock_min;
-	/* Maximum accepted bus clock for slave. */
-	u32 clock_max;
-	/*
-	 * Current wish of the slave. May only change in response to
-	 * ioctls that affect image capture.
-	 */
-	u32 clock_curr;
-};
-
-struct v4l2_ifparm {
-	enum v4l2_if_type if_type;
-	union {
-		struct v4l2_if_type_bt656 bt656;
-	} u;
-};
-
-/* IOCTL command numbers. */
-enum v4l2_int_ioctl_num {
-	/*
-	 *
-	 * "Proper" V4L ioctls, as in struct video_device.
-	 *
-	 */
-	vidioc_int_enum_fmt_cap_num = 1,
-	vidioc_int_g_fmt_cap_num,
-	vidioc_int_s_fmt_cap_num,
-	vidioc_int_try_fmt_cap_num,
-	vidioc_int_queryctrl_num,
-	vidioc_int_g_ctrl_num,
-	vidioc_int_s_ctrl_num,
-	vidioc_int_cropcap_num,
-	vidioc_int_g_crop_num,
-	vidioc_int_s_crop_num,
-	vidioc_int_g_parm_num,
-	vidioc_int_s_parm_num,
-	vidioc_int_querystd_num,
-	vidioc_int_s_std_num,
-	vidioc_int_s_video_routing_num,
-
-	/*
-	 *
-	 * Strictly internal ioctls.
-	 *
-	 */
-	/* Initialise the device when slave attaches to the master. */
-	vidioc_int_dev_init_num = 1000,
-	/* Delinitialise the device at slave detach. */
-	vidioc_int_dev_exit_num,
-	/* Set device power state. */
-	vidioc_int_s_power_num,
-	/*
-	* Get slave private data, e.g. platform-specific slave
-	* configuration used by the master.
-	*/
-	vidioc_int_g_priv_num,
-	/* Get slave interface parameters. */
-	vidioc_int_g_ifparm_num,
-	/* Does the slave need to be reset after VIDIOC_DQBUF? */
-	vidioc_int_g_needs_reset_num,
-	vidioc_int_enum_framesizes_num,
-	vidioc_int_enum_frameintervals_num,
-
-	/*
-	 *
-	 * VIDIOC_INT_* ioctls.
-	 *
-	 */
-	/* VIDIOC_INT_RESET */
-	vidioc_int_reset_num,
-	/* VIDIOC_INT_INIT */
-	vidioc_int_init_num,
-
-	/*
-	 *
-	 * Start of private ioctls.
-	 *
-	 */
-	vidioc_int_priv_start_num = 2000,
-};
-
-/*
- *
- * IOCTL wrapper functions for better type checking.
- *
- */
-
-#define V4L2_INT_WRAPPER_0(name)					\
-	static inline int vidioc_int_##name(struct v4l2_int_device *d)	\
-	{								\
-		return v4l2_int_ioctl_0(d, vidioc_int_##name##_num);	\
-	}								\
-									\
-	static inline struct v4l2_int_ioctl_desc			\
-	vidioc_int_##name##_cb(int (*func)				\
-			       (struct v4l2_int_device *))		\
-	{								\
-		struct v4l2_int_ioctl_desc desc;			\
-									\
-		desc.num = vidioc_int_##name##_num;			\
-		desc.func = (v4l2_int_ioctl_func *)func;		\
-									\
-		return desc;						\
-	}
-
-#define V4L2_INT_WRAPPER_1(name, arg_type, asterisk)			\
-	static inline int vidioc_int_##name(struct v4l2_int_device *d,	\
-					    arg_type asterisk arg)	\
-	{								\
-		return v4l2_int_ioctl_1(d, vidioc_int_##name##_num,	\
-					(void *)(unsigned long)arg);	\
-	}								\
-									\
-	static inline struct v4l2_int_ioctl_desc			\
-	vidioc_int_##name##_cb(int (*func)				\
-			       (struct v4l2_int_device *,		\
-				arg_type asterisk))			\
-	{								\
-		struct v4l2_int_ioctl_desc desc;			\
-									\
-		desc.num = vidioc_int_##name##_num;			\
-		desc.func = (v4l2_int_ioctl_func *)func;		\
-									\
-		return desc;						\
-	}
-
-V4L2_INT_WRAPPER_1(enum_fmt_cap, struct v4l2_fmtdesc, *);
-V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *);
-V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *);
-V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *);
-V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *);
-V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *);
-V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *);
-V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *);
-V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *);
-V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *);
-V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *);
-V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *);
-V4L2_INT_WRAPPER_1(querystd, v4l2_std_id, *);
-V4L2_INT_WRAPPER_1(s_std, v4l2_std_id, *);
-V4L2_INT_WRAPPER_1(s_video_routing, struct v4l2_routing, *);
-
-V4L2_INT_WRAPPER_0(dev_init);
-V4L2_INT_WRAPPER_0(dev_exit);
-V4L2_INT_WRAPPER_1(s_power, enum v4l2_power, );
-V4L2_INT_WRAPPER_1(g_priv, void, *);
-V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *);
-V4L2_INT_WRAPPER_1(g_needs_reset, void, *);
-V4L2_INT_WRAPPER_1(enum_framesizes, struct v4l2_frmsizeenum, *);
-V4L2_INT_WRAPPER_1(enum_frameintervals, struct v4l2_frmivalenum, *);
-
-V4L2_INT_WRAPPER_0(reset);
-V4L2_INT_WRAPPER_0(init);
-
-#endif