media: cx25840: add pin to pad mapping and output format configuration

This commit adds pin to pad mapping and output format configuration support
in CX2584x-series chips to cx25840 driver.

This functionality is then used to allow disabling ivtv-specific hacks and
configuration values (called a "generic mode"), so cx25840 driver can be
used for other devices not needing them without risking compatibility
problems.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

1 files changed, 76 insertions, 1 deletions

diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h
index 4eae27c163ba..ed8ee1c77a6c 100644
--- a/include/media/drv-intf/cx25840.h
+++ b/include/media/drv-intf/cx25840.h
@@ -82,6 +82,81 @@ enum cx25840_video_input {
 	CX25840_DIF_ON = 0x80000400,
 };
 
+/*
+ * The defines below are used to set the chip video output settings
+ * in the generic mode that can be enabled by calling the subdevice
+ * init core op.
+ *
+ * The requested settings can be passed to the init core op as
+ * @val parameter and to the s_routing video op as @config parameter.
+ *
+ * For details please refer to the section 3.7 Video Output Formatting and
+ * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core
+ * of the chip datasheet.
+ */
+#define CX25840_VCONFIG_FMT_SHIFT 0
+#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0)
+#define CX25840_VCONFIG_FMT_BT601 BIT(0)
+#define CX25840_VCONFIG_FMT_BT656 BIT(1)
+#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0)
+#define CX25840_VCONFIG_FMT_VIP2 BIT(2)
+
+#define CX25840_VCONFIG_RES_SHIFT 3
+#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3)
+#define CX25840_VCONFIG_RES_8BIT BIT(3)
+#define CX25840_VCONFIG_RES_10BIT BIT(4)
+
+#define CX25840_VCONFIG_VBIRAW_SHIFT 5
+#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5)
+#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5)
+#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6)
+
+#define CX25840_VCONFIG_ANCDATA_SHIFT 7
+#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7)
+#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7)
+#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8)
+
+#define CX25840_VCONFIG_TASKBIT_SHIFT 9
+#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9)
+#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9)
+#define CX25840_VCONFIG_TASKBIT_ONE BIT(10)
+
+#define CX25840_VCONFIG_ACTIVE_SHIFT 11
+#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11)
+#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11)
+#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12)
+
+#define CX25840_VCONFIG_VALID_SHIFT 13
+#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13)
+#define CX25840_VCONFIG_VALID_NORMAL BIT(13)
+#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14)
+
+#define CX25840_VCONFIG_HRESETW_SHIFT 15
+#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15)
+#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15)
+#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16)
+
+#define CX25840_VCONFIG_CLKGATE_SHIFT 17
+#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17)
+#define CX25840_VCONFIG_CLKGATE_NONE BIT(17)
+#define CX25840_VCONFIG_CLKGATE_VALID BIT(18)
+#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17)
+
+#define CX25840_VCONFIG_DCMODE_SHIFT 19
+#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19)
+#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19)
+#define CX25840_VCONFIG_DCMODE_BYTES BIT(20)
+
+#define CX25840_VCONFIG_IDID0S_SHIFT 21
+#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21)
+#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21)
+#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22)
+
+#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23
+#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23)
+#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23)
+#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24)
+
 enum cx25840_audio_input {
 	/* Audio inputs: serial or In4-In8 */
 	CX25840_AUDIO_SERIAL,
@@ -109,7 +184,7 @@ enum cx25840_io_pin {
 };
 
 enum cx25840_io_pad {
-	/* Output pads */
+	/* Output pads, these must match the actual chip register values */
 	CX25840_PAD_DEFAULT = 0,
 	CX25840_PAD_ACTIVE,
 	CX25840_PAD_VACTIVE,