Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: Changes for v5.4 merge window

With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.

The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
  usb: gadget: net2280: Add workaround for AB chip Errata 11
  usb: gadget: net2280: Move all "ll" registers in one structure
  usb: dwc3: gadget: Workaround Mirosoft's BESL check
  usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
  usb: cdns3: Add Cadence USB3 DRD Driver
  usb: common: Simplify usb_decode_get_set_descriptor function.
  usb: common: Patch simplify usb_decode_set_clear_feature function.
  usb: common: Separated decoding functions from dwc3 driver.
  dt-bindings: add binding for USBSS-DRD controller.
  usb: gadget: composite: Set recommended BESL values
  usb: dwc3: gadget: Set BESL config parameter
  usb: dwc3: Separate field holding multiple properties
  usb: gadget: Export recommended BESL values
  usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
  usb: udc: lpc32xx: silence fall-through warning
  usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
  usb: udc: lpc32xx: remove set but not used 3 variables
  usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
  usb: dwc3: st: Add of_dev_put() in probe function
  usb: dwc3: st: Add of_node_put() before return in probe function
  ...

4 files changed, 59 insertions, 10 deletions

diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index da82606be605..58b83066bea4 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -70,4 +70,31 @@ extern enum usb_device_speed usb_get_maximum_speed(struct device *dev);
  */
 extern const char *usb_state_string(enum usb_device_state state);
 
+#ifdef CONFIG_TRACING
+/**
+ * usb_decode_ctrl - Returns human readable representation of control request.
+ * @str: buffer to return a human-readable representation of control request.
+ *       This buffer should have about 200 bytes.
+ * @size: size of str buffer.
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (CPU byte order)
+ * @wIndex: matches the USB wIndex field (CPU byte order)
+ * @wLength: matches the USB wLength field (CPU byte order)
+ *
+ * Function returns decoded, formatted and human-readable description of
+ * control request packet.
+ *
+ * The usage scenario for this is for tracepoints, so function as a return
+ * use the same value as in parameters. This approach allows to use this
+ * function in TP_printk
+ *
+ * Important: wValue, wIndex, wLength parameters before invoking this function
+ * should be processed by le16_to_cpu macro.
+ */
+extern const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+				   __u8 bRequest, __u16 wValue, __u16 wIndex,
+				   __u16 wLength);
+#endif
+
 #endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index fb19141151d8..124462d65eac 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -291,6 +291,9 @@ struct usb_dcd_config_params {
 #define USB_DEFAULT_U1_DEV_EXIT_LAT	0x01	/* Less then 1 microsec */
 	__le16 bU2DevExitLat;	/* U2 Device exit Latency */
 #define USB_DEFAULT_U2_DEV_EXIT_LAT	0x1F4	/* Less then 500 microsec */
+	__u8 besl_baseline;	/* Recommended baseline BESL (0-15) */
+	__u8 besl_deep;		/* Recommended deep BESL (0-15) */
+#define USB_DEFAULT_BESL_UNSPECIFIED	0xFF	/* No recommended value */
 };
 
 
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 8d3869c7de85..712b2a603645 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -597,6 +597,10 @@ extern void usb_ep0_reinit(struct usb_device *);
 #define GetPortStatus		HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS)
 #define SetHubFeature		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE)
 #define SetPortFeature		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE)
+#define ClearTTBuffer		HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_CLEAR_TT_BUFFER)
+#define ResetTT			HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_RESET_TT)
+#define GetTTState		HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_TT_STATE)
+#define StopTT			HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_STOP_TT)
 
 
 /*-------------------------------------------------------------------------*/
diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h
index 7189e3387bf9..20020c1336d5 100644
--- a/include/linux/usb/usb338x.h
+++ b/include/linux/usb/usb338x.h
@@ -113,7 +113,10 @@ struct usb338x_ll_regs {
 	u32   ll_ltssm_ctrl1;
 	u32   ll_ltssm_ctrl2;
 	u32   ll_ltssm_ctrl3;
-	u32   unused[2];
+	u32   unused1;
+
+	/* 0x710 */
+	u32   unused2;
 	u32   ll_general_ctrl0;
 	u32   ll_general_ctrl1;
 #define     PM_U3_AUTO_EXIT                                     29
@@ -136,29 +139,41 @@ struct usb338x_ll_regs {
 	u32   ll_general_ctrl2;
 #define     SELECT_INVERT_LANE_POLARITY                         7
 #define     FORCE_INVERT_LANE_POLARITY                          6
+
+	/* 0x720 */
 	u32   ll_general_ctrl3;
 	u32   ll_general_ctrl4;
 	u32   ll_error_gen;
-} __packed;
+	u32   unused3;
+
+	/* 0x730 */
+	u32   unused4[4];
 
-struct usb338x_ll_lfps_regs {
-	/* offset 0x748 */
+	/* 0x740 */
+	u32   unused5[2];
 	u32   ll_lfps_5;
 #define     TIMER_LFPS_6US                                      16
 	u32   ll_lfps_6;
 #define     TIMER_LFPS_80US                                     0
-} __packed;
 
-struct usb338x_ll_tsn_regs {
-	/* offset 0x77C */
+	/* 0x750 */
+	u32   unused6[8];
+
+	/* 0x770 */
+	u32   unused7[3];
 	u32   ll_tsn_counters_2;
 #define     HOT_TX_NORESET_TS2                                  24
+
+	/* 0x780 */
 	u32   ll_tsn_counters_3;
 #define     HOT_RX_RESET_TS2                                    0
-} __packed;
+	u32   unused8[3];
 
-struct usb338x_ll_chi_regs {
-	/* offset 0x79C */
+	/* 0x790 */
+	u32   unused9;
+	u32   ll_lfps_timers_2;
+#define     LFPS_TIMERS_2_WORKAROUND_VALUE			0x084d
+	u32   unused10;
 	u32   ll_tsn_chicken_bit;
 #define     RECOVERY_IDLE_TO_RECOVER_FMW                        3
 } __packed;