Merge drm/drm-next into drm-intel-next-queued

Sync with drm-next to get the new logging macros, among other things.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

21 files changed, 804 insertions, 285 deletions

diff --git a/include/drm/ati_pcigart.h b/include/drm/ati_pcigart.h
deleted file mode 100644
index a728a1364e66..000000000000
--- a/include/drm/ati_pcigart.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef DRM_ATI_PCIGART_H
-#define DRM_ATI_PCIGART_H
-
-#include <drm/drm_legacy.h>
-
-/* location of GART table */
-#define DRM_ATI_GART_MAIN 1
-#define DRM_ATI_GART_FB   2
-
-#define DRM_ATI_GART_PCI 1
-#define DRM_ATI_GART_PCIE 2
-#define DRM_ATI_GART_IGP 3
-
-struct drm_ati_pcigart_info {
-	int gart_table_location;
-	int gart_reg_if;
-	void *addr;
-	dma_addr_t bus_addr;
-	dma_addr_t table_mask;
-	struct drm_dma_handle *table_handle;
-	struct drm_local_map mapping;
-	int table_size;
-};
-
-extern int drm_ati_pcigart_init(struct drm_device *dev,
-				struct drm_ati_pcigart_info * gart_info);
-extern int drm_ati_pcigart_cleanup(struct drm_device *dev,
-				   struct drm_ati_pcigart_info * gart_info);
-
-#endif
diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h
index 94cc64a342e1..b0e390b3288e 100644
--- a/include/drm/bridge/dw_mipi_dsi.h
+++ b/include/drm/bridge/dw_mipi_dsi.h
@@ -19,6 +19,13 @@ struct dw_mipi_dsi;
 struct mipi_dsi_device;
 struct platform_device;
 
+struct dw_mipi_dsi_dphy_timing {
+	u16 data_hs2lp;
+	u16 data_lp2hs;
+	u16 clk_hs2lp;
+	u16 clk_lp2hs;
+};
+
 struct dw_mipi_dsi_phy_ops {
 	int (*init)(void *priv_data);
 	void (*power_on)(void *priv_data);
@@ -27,6 +34,8 @@ struct dw_mipi_dsi_phy_ops {
 			     const struct drm_display_mode *mode,
 			     unsigned long mode_flags, u32 lanes, u32 format,
 			     unsigned int *lane_mbps);
+	int (*get_timing)(void *priv_data, unsigned int lane_mbps,
+			  struct dw_mipi_dsi_dphy_timing *timing);
 };
 
 struct dw_mipi_dsi_host_ops {
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index 927e1205d7aa..ccce65e14917 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -35,7 +35,7 @@
  * struct drm_crtc_commit - track modeset commits on a CRTC
  *
  * This structure is used to track pending modeset changes and atomic commit on
- * a per-CRTC basis. Since updating the list should never block this structure
+ * a per-CRTC basis. Since updating the list should never block, this structure
  * is reference counted to allow waiters to safely wait on an event to complete,
  * without holding any locks.
  *
@@ -60,8 +60,8 @@
  * 	wait for flip_done		<----
  * 	clean up atomic state
  *
- * The important bit to know is that cleanup_done is the terminal event, but the
- * ordering between flip_done and hw_done is entirely up to the specific driver
+ * The important bit to know is that &cleanup_done is the terminal event, but the
+ * ordering between &flip_done and &hw_done is entirely up to the specific driver
  * and modeset state change.
  *
  * For an implementation of how to use this look at
@@ -92,6 +92,9 @@ struct drm_crtc_commit {
 	 * commit is sent to userspace, or when an out-fence is singalled. Note
 	 * that for most hardware, in most cases this happens after @hw_done is
 	 * signalled.
+	 *
+	 * Completion of this stage is signalled implicitly by calling
+	 * drm_crtc_send_vblank_event() on &drm_crtc_state.event.
 	 */
 	struct completion flip_done;
 
@@ -107,6 +110,9 @@ struct drm_crtc_commit {
 	 * Note that this does not need to include separately reference-counted
 	 * resources like backing storage buffer pinning, or runtime pm
 	 * management.
+	 *
+	 * Drivers should call drm_atomic_helper_commit_hw_done() to signal
+	 * completion of this stage.
 	 */
 	struct completion hw_done;
 
@@ -118,6 +124,9 @@ struct drm_crtc_commit {
 	 * a vblank wait completed it might be a bit later. This completion is
 	 * useful to throttle updates and avoid hardware updates getting ahead
 	 * of the buffer cleanup too much.
+	 *
+	 * Drivers should call drm_atomic_helper_commit_cleanup_done() to signal
+	 * completion of this stage.
 	 */
 	struct completion cleanup_done;
 
@@ -354,7 +363,7 @@ struct drm_atomic_state {
 	 * When a connector or plane is not bound to any CRTC, it's still important
 	 * to preserve linearity to prevent the atomic states from being freed to early.
 	 *
-	 * This commit (if set) is not bound to any crtc, but will be completed when
+	 * This commit (if set) is not bound to any CRTC, but will be completed when
 	 * drm_atomic_helper_commit_hw_done() is called.
 	 */
 	struct drm_crtc_commit *fake_commit;
@@ -467,12 +476,12 @@ drm_atomic_get_new_connector_for_encoder(struct drm_atomic_state *state,
 					 struct drm_encoder *encoder);
 
 /**
- * drm_atomic_get_existing_crtc_state - get crtc state, if it exists
+ * drm_atomic_get_existing_crtc_state - get CRTC state, if it exists
  * @state: global atomic state object
- * @crtc: crtc to grab
+ * @crtc: CRTC to grab
  *
- * This function returns the crtc state for the given crtc, or NULL
- * if the crtc is not part of the global atomic state.
+ * This function returns the CRTC state for the given CRTC, or NULL
+ * if the CRTC is not part of the global atomic state.
  *
  * This function is deprecated, @drm_atomic_get_old_crtc_state or
  * @drm_atomic_get_new_crtc_state should be used instead.
@@ -485,12 +494,12 @@ drm_atomic_get_existing_crtc_state(struct drm_atomic_state *state,
 }
 
 /**
- * drm_atomic_get_old_crtc_state - get old crtc state, if it exists
+ * drm_atomic_get_old_crtc_state - get old CRTC state, if it exists
  * @state: global atomic state object
- * @crtc: crtc to grab
+ * @crtc: CRTC to grab
  *
- * This function returns the old crtc state for the given crtc, or
- * NULL if the crtc is not part of the global atomic state.
+ * This function returns the old CRTC state for the given CRTC, or
+ * NULL if the CRTC is not part of the global atomic state.
  */
 static inline struct drm_crtc_state *
 drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
@@ -499,12 +508,12 @@ drm_atomic_get_old_crtc_state(struct drm_atomic_state *state,
 	return state->crtcs[drm_crtc_index(crtc)].old_state;
 }
 /**
- * drm_atomic_get_new_crtc_state - get new crtc state, if it exists
+ * drm_atomic_get_new_crtc_state - get new CRTC state, if it exists
  * @state: global atomic state object
- * @crtc: crtc to grab
+ * @crtc: CRTC to grab
  *
- * This function returns the new crtc state for the given crtc, or
- * NULL if the crtc is not part of the global atomic state.
+ * This function returns the new CRTC state for the given CRTC, or
+ * NULL if the CRTC is not part of the global atomic state.
  */
 static inline struct drm_crtc_state *
 drm_atomic_get_new_crtc_state(struct drm_atomic_state *state,
@@ -661,6 +670,9 @@ __drm_atomic_get_current_plane_state(struct drm_atomic_state *state,
 }
 
 int __must_check
+drm_atomic_add_encoder_bridges(struct drm_atomic_state *state,
+			       struct drm_encoder *encoder);
+int __must_check
 drm_atomic_add_affected_connectors(struct drm_atomic_state *state,
 				   struct drm_crtc *crtc);
 int __must_check
@@ -693,6 +705,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)								\
 		for_each_if ((__state)->connectors[__i].ptr &&			\
 			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
 			     (old_connector_state) = (__state)->connectors[__i].old_state,	\
 			     (new_connector_state) = (__state)->connectors[__i].new_state, 1))
 
@@ -714,6 +727,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)								\
 		for_each_if ((__state)->connectors[__i].ptr &&			\
 			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
 			     (old_connector_state) = (__state)->connectors[__i].old_state, 1))
 
 /**
@@ -734,7 +748,9 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)								\
 		for_each_if ((__state)->connectors[__i].ptr &&			\
 			     ((connector) = (__state)->connectors[__i].ptr,	\
-			     (new_connector_state) = (__state)->connectors[__i].new_state, 1))
+			     (void)(connector) /* Only to avoid unused-but-set-variable warning */, \
+			     (new_connector_state) = (__state)->connectors[__i].new_state, \
+			     (void)(new_connector_state) /* Only to avoid unused-but-set-variable warning */, 1))
 
 /**
  * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -754,7 +770,9 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)							\
 		for_each_if ((__state)->crtcs[__i].ptr &&		\
 			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			      (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
 			     (old_crtc_state) = (__state)->crtcs[__i].old_state, \
+			     (void)(old_crtc_state) /* Only to avoid unused-but-set-variable warning */, \
 			     (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))
 
 /**
@@ -793,7 +811,9 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)							\
 		for_each_if ((__state)->crtcs[__i].ptr &&		\
 			     ((crtc) = (__state)->crtcs[__i].ptr,	\
-			     (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))
+			     (void)(crtc) /* Only to avoid unused-but-set-variable warning */, \
+			     (new_crtc_state) = (__state)->crtcs[__i].new_state, \
+			     (void)(new_crtc_state) /* Only to avoid unused-but-set-variable warning */, 1))
 
 /**
  * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
@@ -813,6 +833,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)							\
 		for_each_if ((__state)->planes[__i].ptr &&		\
 			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
 			      (old_plane_state) = (__state)->planes[__i].old_state,\
 			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
 
@@ -873,7 +894,9 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i)++)							\
 		for_each_if ((__state)->planes[__i].ptr &&		\
 			     ((plane) = (__state)->planes[__i].ptr,	\
-			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
+			      (void)(plane) /* Only to avoid unused-but-set-variable warning */, \
+			      (new_plane_state) = (__state)->planes[__i].new_state, \
+			      (void)(new_plane_state) /* Only to avoid unused-but-set-variable warning */, 1))
 
 /**
  * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
@@ -958,11 +981,11 @@ drm_atomic_crtc_needs_modeset(const struct drm_crtc_state *state)
 }
 
 /**
- * drm_atomic_crtc_effectively_active - compute whether crtc is actually active
+ * drm_atomic_crtc_effectively_active - compute whether CRTC is actually active
  * @state: &drm_crtc_state for the CRTC
  *
  * When in self refresh mode, the crtc_state->active value will be false, since
- * the crtc is off. However in some cases we're interested in whether the crtc
+ * the CRTC is off. However in some cases we're interested in whether the CRTC
  * is active, or effectively active (ie: it's connected to an active display).
  * In these cases, use this function instead of just checking active.
  */
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index bf4e07141d81..9db3cac48f4f 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -152,7 +152,7 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
 /**
  * drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC
  * @plane: the loop cursor
- * @crtc:  the crtc whose planes are iterated
+ * @crtc:  the CRTC whose planes are iterated
  *
  * This iterates over the current state, useful (for example) when applying
  * atomic state after it has been checked and swapped.  To iterate over the
@@ -166,7 +166,7 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
 /**
  * drm_crtc_atomic_state_for_each_plane - iterate over attached planes in new state
  * @plane: the loop cursor
- * @crtc_state: the incoming crtc-state
+ * @crtc_state: the incoming CRTC state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
  * attached if the specified state is applied.  Useful during for example
@@ -180,7 +180,7 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  * drm_crtc_atomic_state_for_each_plane_state - iterate over attached planes in new state
  * @plane: the loop cursor
  * @plane_state: loop cursor for the plane's state, must be const
- * @crtc_state: the incoming crtc-state
+ * @crtc_state: the incoming CRTC state
  *
  * Similar to drm_crtc_for_each_plane(), but iterates the planes that will be
  * attached if the specified state is applied.  Useful during for example
@@ -189,7 +189,7 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc,
  *
  * Compared to just drm_atomic_crtc_state_for_each_plane() this also fills in a
  * const plane_state. This is useful when a driver just wants to peek at other
- * active planes on this crtc, but does not need to change it.
+ * active planes on this CRTC, but does not need to change it.
  */
 #define drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state) \
 	drm_for_each_plane_mask(plane, (crtc_state)->state->dev, (crtc_state)->plane_mask) \
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index c0a2286a81e9..46e15526b087 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -25,6 +25,9 @@
 
 #include <linux/list.h>
 #include <linux/ctype.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_encoder.h>
 #include <drm/drm_mode_object.h>
 #include <drm/drm_modes.h>
 
@@ -33,6 +36,65 @@ struct drm_bridge_timings;
 struct drm_panel;
 
 /**
+ * struct drm_bus_cfg - bus configuration
+ *
+ * This structure stores the configuration of a physical bus between two
+ * components in an output pipeline, usually between two bridges, an encoder
+ * and a bridge, or a bridge and a connector.
+ *
+ * The bus configuration is stored in &drm_bridge_state separately for the
+ * input and output buses, as seen from the point of view of each bridge. The
+ * bus configuration of a bridge output is usually identical to the
+ * configuration of the next bridge's input, but may differ if the signals are
+ * modified between the two bridges, for instance by an inverter on the board.
+ * The input and output configurations of a bridge may differ if the bridge
+ * modifies the signals internally, for instance by performing format
+ * conversion, or modifying signals polarities.
+ */
+struct drm_bus_cfg {
+	/**
+	 * @format: format used on this bus (one of the MEDIA_BUS_FMT_* format)
+	 *
+	 * This field should not be directly modified by drivers
+	 * (&drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus
+	 * format negotiation).
+	 */
+	u32 format;
+
+	/**
+	 * @flags: DRM_BUS_* flags used on this bus
+	 */
+	u32 flags;
+};
+
+/**
+ * struct drm_bridge_state - Atomic bridge state object
+ * @base: inherit from &drm_private_state
+ * @bridge: the bridge this state refers to
+ */
+struct drm_bridge_state {
+	struct drm_private_state base;
+
+	struct drm_bridge *bridge;
+
+	/**
+	 * @input_bus_cfg: input bus configuration
+	 */
+	struct drm_bus_cfg input_bus_cfg;
+
+	/**
+	 * @output_bus_cfg: input bus configuration
+	 */
+	struct drm_bus_cfg output_bus_cfg;
+};
+
+static inline struct drm_bridge_state *
+drm_priv_to_bridge_state(struct drm_private_state *priv)
+{
+	return container_of(priv, struct drm_bridge_state, base);
+}
+
+/**
  * struct drm_bridge_funcs - drm_bridge control functions
  */
 struct drm_bridge_funcs {
@@ -108,7 +170,9 @@ struct drm_bridge_funcs {
 	 * this function passes all other callbacks must succeed for this
 	 * configuration.
 	 *
-	 * The @mode_fixup callback is optional.
+	 * The mode_fixup callback is optional. &drm_bridge_funcs.mode_fixup()
+	 * is not called when &drm_bridge_funcs.atomic_check() is implemented,
+	 * so only one of them should be provided.
 	 *
 	 * NOTE:
 	 *
@@ -254,14 +318,15 @@ struct drm_bridge_funcs {
 	 * there is one) when this callback is called.
 	 *
 	 * Note that this function will only be invoked in the context of an
-	 * atomic commit. It will not be invoked from &drm_bridge_pre_enable. It
-	 * would be prudent to also provide an implementation of @pre_enable if
-	 * you are expecting driver calls into &drm_bridge_pre_enable.
+	 * atomic commit. It will not be invoked from
+	 * &drm_bridge_chain_pre_enable. It would be prudent to also provide an
+	 * implementation of @pre_enable if you are expecting driver calls into
+	 * &drm_bridge_chain_pre_enable.
 	 *
 	 * The @atomic_pre_enable callback is optional.
 	 */
 	void (*atomic_pre_enable)(struct drm_bridge *bridge,
-				  struct drm_atomic_state *state);
+				  struct drm_bridge_state *old_bridge_state);
 
 	/**
 	 * @atomic_enable:
@@ -279,14 +344,14 @@ struct drm_bridge_funcs {
 	 * chain if there is one.
 	 *
 	 * Note that this function will only be invoked in the context of an
-	 * atomic commit. It will not be invoked from &drm_bridge_enable. It
-	 * would be prudent to also provide an implementation of @enable if
-	 * you are expecting driver calls into &drm_bridge_enable.
+	 * atomic commit. It will not be invoked from &drm_bridge_chain_enable.
+	 * It would be prudent to also provide an implementation of @enable if
+	 * you are expecting driver calls into &drm_bridge_chain_enable.
 	 *
 	 * The @atomic_enable callback is optional.
 	 */
 	void (*atomic_enable)(struct drm_bridge *bridge,
-			      struct drm_atomic_state *state);
+			      struct drm_bridge_state *old_bridge_state);
 	/**
 	 * @atomic_disable:
 	 *
@@ -301,14 +366,15 @@ struct drm_bridge_funcs {
 	 * signals) feeding it is still running when this callback is called.
 	 *
 	 * Note that this function will only be invoked in the context of an
-	 * atomic commit. It will not be invoked from &drm_bridge_disable. It
-	 * would be prudent to also provide an implementation of @disable if
-	 * you are expecting driver calls into &drm_bridge_disable.
+	 * atomic commit. It will not be invoked from
+	 * &drm_bridge_chain_disable. It would be prudent to also provide an
+	 * implementation of @disable if you are expecting driver calls into
+	 * &drm_bridge_chain_disable.
 	 *
 	 * The @atomic_disable callback is optional.
 	 */
 	void (*atomic_disable)(struct drm_bridge *bridge,
-			       struct drm_atomic_state *state);
+			       struct drm_bridge_state *old_bridge_state);
 
 	/**
 	 * @atomic_post_disable:
@@ -325,15 +391,155 @@ struct drm_bridge_funcs {
 	 * called.
 	 *
 	 * Note that this function will only be invoked in the context of an
-	 * atomic commit. It will not be invoked from &drm_bridge_post_disable.
+	 * atomic commit. It will not be invoked from
+	 * &drm_bridge_chain_post_disable.
 	 * It would be prudent to also provide an implementation of
 	 * @post_disable if you are expecting driver calls into
-	 * &drm_bridge_post_disable.
+	 * &drm_bridge_chain_post_disable.
 	 *
 	 * The @atomic_post_disable callback is optional.
 	 */
 	void (*atomic_post_disable)(struct drm_bridge *bridge,
-				    struct drm_atomic_state *state);
+				    struct drm_bridge_state *old_bridge_state);
+
+	/**
+	 * @atomic_duplicate_state:
+	 *
+	 * Duplicate the current bridge state object (which is guaranteed to be
+	 * non-NULL).
+	 *
+	 * The atomic_duplicate_state() is optional. When not implemented the
+	 * core allocates a drm_bridge_state object and calls
+	 * &__drm_atomic_helper_bridge_duplicate_state() to initialize it.
+	 *
+	 * RETURNS:
+	 * A valid drm_bridge_state object or NULL if the allocation fails.
+	 */
+	struct drm_bridge_state *(*atomic_duplicate_state)(struct drm_bridge *bridge);
+
+	/**
+	 * @atomic_destroy_state:
+	 *
+	 * Destroy a bridge state object previously allocated by
+	 * &drm_bridge_funcs.atomic_duplicate_state().
+	 *
+	 * The atomic_destroy_state hook is optional. When not implemented the
+	 * core calls kfree() on the state.
+	 */
+	void (*atomic_destroy_state)(struct drm_bridge *bridge,
+				     struct drm_bridge_state *state);
+
+	/**
+	 * @atomic_get_output_bus_fmts:
+	 *
+	 * Return the supported bus formats on the output end of a bridge.
+	 * The returned array must be allocated with kmalloc() and will be
+	 * freed by the caller. If the allocation fails, NULL should be
+	 * returned. num_output_fmts must be set to the returned array size.
+	 * Formats listed in the returned array should be listed in decreasing
+	 * preference order (the core will try all formats until it finds one
+	 * that works).
+	 *
+	 * This method is only called on the last element of the bridge chain
+	 * as part of the bus format negotiation process that happens in
+	 * &drm_atomic_bridge_chain_select_bus_fmts().
+	 * This method is optional. When not implemented, the core will
+	 * fall back to &drm_connector.display_info.bus_formats[0] if
+	 * &drm_connector.display_info.num_bus_formats > 0,
+	 * or to MEDIA_BUS_FMT_FIXED otherwise.
+	 */
+	u32 *(*atomic_get_output_bus_fmts)(struct drm_bridge *bridge,
+					   struct drm_bridge_state *bridge_state,
+					   struct drm_crtc_state *crtc_state,
+					   struct drm_connector_state *conn_state,
+					   unsigned int *num_output_fmts);
+
+	/**
+	 * @atomic_get_input_bus_fmts:
+	 *
+	 * Return the supported bus formats on the input end of a bridge for
+	 * a specific output bus format.
+	 *
+	 * The returned array must be allocated with kmalloc() and will be
+	 * freed by the caller. If the allocation fails, NULL should be
+	 * returned. num_output_fmts must be set to the returned array size.
+	 * Formats listed in the returned array should be listed in decreasing
+	 * preference order (the core will try all formats until it finds one
+	 * that works). When the format is not supported NULL should be
+	 * returned and *num_output_fmts should be set to 0.
+	 *
+	 * This method is called on all elements of the bridge chain as part of
+	 * the bus format negotiation process that happens in
+	 * &drm_atomic_bridge_chain_select_bus_fmts().
+	 * This method is optional. When not implemented, the core will bypass
+	 * bus format negotiation on this element of the bridge without
+	 * failing, and the previous element in the chain will be passed
+	 * MEDIA_BUS_FMT_FIXED as its output bus format.
+	 *
+	 * Bridge drivers that need to support being linked to bridges that are
+	 * not supporting bus format negotiation should handle the
+	 * output_fmt == MEDIA_BUS_FMT_FIXED case appropriately, by selecting a
+	 * sensible default value or extracting this information from somewhere
+	 * else (FW property, &drm_display_mode, &drm_display_info, ...)
+	 *
+	 * Note: Even if input format selection on the first bridge has no
+	 * impact on the negotiation process (bus format negotiation stops once
+	 * we reach the first element of the chain), drivers are expected to
+	 * return accurate input formats as the input format may be used to
+	 * configure the CRTC output appropriately.
+	 */
+	u32 *(*atomic_get_input_bus_fmts)(struct drm_bridge *bridge,
+					  struct drm_bridge_state *bridge_state,
+					  struct drm_crtc_state *crtc_state,
+					  struct drm_connector_state *conn_state,
+					  u32 output_fmt,
+					  unsigned int *num_input_fmts);
+
+	/**
+	 * @atomic_check:
+	 *
+	 * This method is responsible for checking bridge state correctness.
+	 * It can also check the state of the surrounding components in chain
+	 * to make sure the whole pipeline can work properly.
+	 *
+	 * &drm_bridge_funcs.atomic_check() hooks are called in reverse
+	 * order (from the last to the first bridge).
+	 *
+	 * This method is optional. &drm_bridge_funcs.mode_fixup() is not
+	 * called when &drm_bridge_funcs.atomic_check() is implemented, so only
+	 * one of them should be provided.
+	 *
+	 * If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or
+	 * &drm_bridge_state.output_bus_cfg.flags it should should happen in
+	 * this function. By default the &drm_bridge_state.output_bus_cfg.flags
+	 * field is set to the next bridge
+	 * &drm_bridge_state.input_bus_cfg.flags value or
+	 * &drm_connector.display_info.bus_flags if the bridge is the last
+	 * element in the chain.
+	 *
+	 * RETURNS:
+	 * zero if the check passed, a negative error code otherwise.
+	 */
+	int (*atomic_check)(struct drm_bridge *bridge,
+			    struct drm_bridge_state *bridge_state,
+			    struct drm_crtc_state *crtc_state,
+			    struct drm_connector_state *conn_state);
+
+	/**
+	 * @atomic_reset:
+	 *
+	 * Reset the bridge to a predefined state (or retrieve its current
+	 * state) and return a &drm_bridge_state object matching this state.
+	 * This function is called at attach time.
+	 *
+	 * The atomic_reset hook is optional. When not implemented the core
+	 * allocates a new state and calls &__drm_atomic_helper_bridge_reset().
+	 *
+	 * RETURNS:
+	 * A valid drm_bridge_state object in case of success, an ERR_PTR()
+	 * giving the reason of the failure otherwise.
+	 */
+	struct drm_bridge_state *(*atomic_reset)(struct drm_bridge *bridge);
 };
 
 /**
@@ -376,12 +582,14 @@ struct drm_bridge_timings {
  * struct drm_bridge - central DRM bridge control structure
  */
 struct drm_bridge {
+	/** @base: inherit from &drm_private_object */
+	struct drm_private_obj base;
 	/** @dev: DRM device this bridge belongs to */
 	struct drm_device *dev;
 	/** @encoder: encoder to which this bridge is connected */
 	struct drm_encoder *encoder;
-	/** @next: the next bridge in the encoder chain */
-	struct drm_bridge *next;
+	/** @chain_node: used to form a bridge chain */
+	struct list_head chain_node;
 #ifdef CONFIG_OF
 	/** @of_node: device node pointer to the bridge */
 	struct device_node *of_node;
@@ -400,33 +608,153 @@ struct drm_bridge {
 	void *driver_private;
 };
 
+static inline struct drm_bridge *
+drm_priv_to_bridge(struct drm_private_obj *priv)
+{
+	return container_of(priv, struct drm_bridge, base);
+}
+
 void drm_bridge_add(struct drm_bridge *bridge);
 void drm_bridge_remove(struct drm_bridge *bridge);
 struct drm_bridge *of_drm_find_bridge(struct device_node *np);
 int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
 		      struct drm_bridge *previous);
 
-bool drm_bridge_mode_fixup(struct drm_bridge *bridge,
-			   const struct drm_display_mode *mode,
-			   struct drm_display_mode *adjusted_mode);
-enum drm_mode_status drm_bridge_mode_valid(struct drm_bridge *bridge,
-					   const struct drm_display_mode *mode);
-void drm_bridge_disable(struct drm_bridge *bridge);
-void drm_bridge_post_disable(struct drm_bridge *bridge);
-void drm_bridge_mode_set(struct drm_bridge *bridge,
-			 const struct drm_display_mode *mode,
-			 const struct drm_display_mode *adjusted_mode);
-void drm_bridge_pre_enable(struct drm_bridge *bridge);
-void drm_bridge_enable(struct drm_bridge *bridge);
+/**
+ * drm_bridge_get_next_bridge() - Get the next bridge in the chain
+ * @bridge: bridge object
+ *
+ * RETURNS:
+ * the next bridge in the chain after @bridge, or NULL if @bridge is the last.
+ */
+static inline struct drm_bridge *
+drm_bridge_get_next_bridge(struct drm_bridge *bridge)
+{
+	if (list_is_last(&bridge->chain_node, &bridge->encoder->bridge_chain))
+		return NULL;
 
-void drm_atomic_bridge_disable(struct drm_bridge *bridge,
-			       struct drm_atomic_state *state);
-void drm_atomic_bridge_post_disable(struct drm_bridge *bridge,
+	return list_next_entry(bridge, chain_node);
+}
+
+/**
+ * drm_bridge_get_prev_bridge() - Get the previous bridge in the chain
+ * @bridge: bridge object
+ *
+ * RETURNS:
+ * the previous bridge in the chain, or NULL if @bridge is the first.
+ */
+static inline struct drm_bridge *
+drm_bridge_get_prev_bridge(struct drm_bridge *bridge)
+{
+	if (list_is_first(&bridge->chain_node, &bridge->encoder->bridge_chain))
+		return NULL;
+
+	return list_prev_entry(bridge, chain_node);
+}
+
+/**
+ * drm_bridge_chain_get_first_bridge() - Get the first bridge in the chain
+ * @encoder: encoder object
+ *
+ * RETURNS:
+ * the first bridge in the chain, or NULL if @encoder has no bridge attached
+ * to it.
+ */
+static inline struct drm_bridge *
+drm_bridge_chain_get_first_bridge(struct drm_encoder *encoder)
+{
+	return list_first_entry_or_null(&encoder->bridge_chain,
+					struct drm_bridge, chain_node);
+}
+
+/**
+ * drm_for_each_bridge_in_chain() - Iterate over all bridges present in a chain
+ * @encoder: the encoder to iterate bridges on
+ * @bridge: a bridge pointer updated to point to the current bridge at each
+ *	    iteration
+ *
+ * Iterate over all bridges present in the bridge chain attached to @encoder.
+ */
+#define drm_for_each_bridge_in_chain(encoder, bridge)			\
+	list_for_each_entry(bridge, &(encoder)->bridge_chain, chain_node)
+
+bool drm_bridge_chain_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode);
+enum drm_mode_status
+drm_bridge_chain_mode_valid(struct drm_bridge *bridge,
+			    const struct drm_display_mode *mode);
+void drm_bridge_chain_disable(struct drm_bridge *bridge);
+void drm_bridge_chain_post_disable(struct drm_bridge *bridge);
+void drm_bridge_chain_mode_set(struct drm_bridge *bridge,
+			       const struct drm_display_mode *mode,
+			       const struct drm_display_mode *adjusted_mode);
+void drm_bridge_chain_pre_enable(struct drm_bridge *bridge);
+void drm_bridge_chain_enable(struct drm_bridge *bridge);
+
+int drm_atomic_bridge_chain_check(struct drm_bridge *bridge,
+				  struct drm_crtc_state *crtc_state,
+				  struct drm_connector_state *conn_state);
+void drm_atomic_bridge_chain_disable(struct drm_bridge *bridge,
+				     struct drm_atomic_state *state);
+void drm_atomic_bridge_chain_post_disable(struct drm_bridge *bridge,
+					  struct drm_atomic_state *state);
+void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge,
+					struct drm_atomic_state *state);
+void drm_atomic_bridge_chain_enable(struct drm_bridge *bridge,
 				    struct drm_atomic_state *state);
-void drm_atomic_bridge_pre_enable(struct drm_bridge *bridge,
-				  struct drm_atomic_state *state);
-void drm_atomic_bridge_enable(struct drm_bridge *bridge,
-			      struct drm_atomic_state *state);
+
+u32 *
+drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
+					struct drm_bridge_state *bridge_state,
+					struct drm_crtc_state *crtc_state,
+					struct drm_connector_state *conn_state,
+					u32 output_fmt,
+					unsigned int *num_input_fmts);
+
+void __drm_atomic_helper_bridge_reset(struct drm_bridge *bridge,
+				      struct drm_bridge_state *state);
+void __drm_atomic_helper_bridge_duplicate_state(struct drm_bridge *bridge,
+						struct drm_bridge_state *new);
+
+static inline struct drm_bridge_state *
+drm_atomic_get_bridge_state(struct drm_atomic_state *state,
+			    struct drm_bridge *bridge)
+{
+	struct drm_private_state *obj_state;
+
+	obj_state = drm_atomic_get_private_obj_state(state, &bridge->base);
+	if (IS_ERR(obj_state))
+		return ERR_CAST(obj_state);
+
+	return drm_priv_to_bridge_state(obj_state);
+}
+
+static inline struct drm_bridge_state *
+drm_atomic_get_old_bridge_state(struct drm_atomic_state *state,
+				struct drm_bridge *bridge)
+{
+	struct drm_private_state *obj_state;
+
+	obj_state = drm_atomic_get_old_private_obj_state(state, &bridge->base);
+	if (!obj_state)
+		return NULL;
+
+	return drm_priv_to_bridge_state(obj_state);
+}
+
+static inline struct drm_bridge_state *
+drm_atomic_get_new_bridge_state(struct drm_atomic_state *state,
+				struct drm_bridge *bridge)
+{
+	struct drm_private_state *obj_state;
+
+	obj_state = drm_atomic_get_new_private_obj_state(state, &bridge->base);
+	if (!obj_state)
+		return NULL;
+
+	return drm_priv_to_bridge_state(obj_state);
+}
 
 #ifdef CONFIG_DRM_PANEL_BRIDGE
 struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel);
@@ -438,6 +766,7 @@ struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
 struct drm_bridge *devm_drm_panel_bridge_add_typed(struct device *dev,
 						   struct drm_panel *panel,
 						   u32 connector_type);
+struct drm_connector *drm_panel_bridge_connector(struct drm_bridge *bridge);
 #endif
 
 #endif
diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h
index d1c662d92ab7..81c298488b0c 100644
--- a/include/drm/drm_color_mgmt.h
+++ b/include/drm/drm_color_mgmt.h
@@ -29,7 +29,30 @@
 struct drm_crtc;
 struct drm_plane;
 
-uint32_t drm_color_lut_extract(uint32_t user_input, uint32_t bit_precision);
+/**
+ * drm_color_lut_extract - clamp and round LUT entries
+ * @user_input: input value
+ * @bit_precision: number of bits the hw LUT supports
+ *
+ * Extract a degamma/gamma LUT value provided by user (in the form of
+ * &drm_color_lut entries) and round it to the precision supported by the
+ * hardware.
+ */
+static inline u32 drm_color_lut_extract(u32 user_input, int bit_precision)
+{
+	u32 val = user_input;
+	u32 max = 0xffff >> (16 - bit_precision);
+
+	/* Round only if we're not using full precision. */
+	if (bit_precision < 16) {
+		val += 1UL << (16 - bit_precision - 1);
+		val >>= 16 - bit_precision;
+	}
+
+	return clamp_val(val, 0, max);
+}
+
+u64 drm_color_ctm_s31_32_to_qm_n(u64 user_input, u32 m, u32 n);
 
 void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc,
 				uint degamma_lut_size,
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 5f8c3389d46f..221910948b37 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -188,19 +188,19 @@ struct drm_hdmi_info {
 
 	/**
 	 * @y420_vdb_modes: bitmap of modes which can support ycbcr420
-	 * output only (not normal RGB/YCBCR444/422 outputs). There are total
-	 * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map
-	 * upto 128 VICs;
+	 * output only (not normal RGB/YCBCR444/422 outputs). The max VIC
+	 * defined by the CEA-861-G spec is 219, so the size is 256 bits to map
+	 * up to 256 VICs.
 	 */
-	unsigned long y420_vdb_modes[BITS_TO_LONGS(128)];
+	unsigned long y420_vdb_modes[BITS_TO_LONGS(256)];
 
 	/**
 	 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
-	 * output also, along with normal HDMI outputs. There are total 107
-	 * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto
-	 * 128 VICs;
+	 * output also, along with normal HDMI outputs. The max VIC defined by
+	 * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256
+	 * VICs.
 	 */
-	unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)];
+	unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)];
 
 	/** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
 	u64 y420_cmdb_map;
@@ -1070,6 +1070,14 @@ struct drm_cmdline_mode {
 	unsigned int rotation_reflection;
 
 	/**
+	 * @panel_orientation:
+	 *
+	 * drm-connector "panel orientation" property override value,
+	 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set.
+	 */
+	enum drm_panel_orientation panel_orientation;
+
+	/**
 	 * @tv_margins: TV margins to apply to the mode.
 	 */
 	struct drm_connector_tv_margins tv_margins;
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 51ecb5112ef8..8f8f3632e697 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -307,7 +307,7 @@
 # define DP_DSC_THROUGHPUT_MODE_0_900       (12 << 0)
 # define DP_DSC_THROUGHPUT_MODE_0_950       (13 << 0)
 # define DP_DSC_THROUGHPUT_MODE_0_1000      (14 << 0)
-# define DP_DSC_THROUGHPUT_MODE_0_170       (15 << 4)
+# define DP_DSC_THROUGHPUT_MODE_0_170       (15 << 0) /* 1.4a */
 # define DP_DSC_THROUGHPUT_MODE_1_MASK      (0xf << 4)
 # define DP_DSC_THROUGHPUT_MODE_1_SHIFT     4
 # define DP_DSC_THROUGHPUT_MODE_1_UPSUPPORTED 0
@@ -1042,6 +1042,8 @@
 #define DP_SYMBOL_ERROR_COUNT_LANE2_PHY_REPEATER1	    0xf0039 /* 1.3 */
 #define DP_SYMBOL_ERROR_COUNT_LANE3_PHY_REPEATER1	    0xf003b /* 1.3 */
 #define DP_FEC_STATUS_PHY_REPEATER1			    0xf0290 /* 1.4 */
+#define DP_FEC_ERROR_COUNT_PHY_REPEATER1                    0xf0291 /* 1.4 */
+#define DP_FEC_CAPABILITY_PHY_REPEATER1                     0xf0294 /* 1.4a */
 
 /* Repeater modes */
 #define DP_PHY_REPEATER_MODE_TRANSPARENT		    0x55    /* 1.3 */
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index d5fc90b30487..5699493c6fb1 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -561,7 +561,8 @@ struct drm_dp_mst_topology_mgr {
 	struct drm_dp_sideband_msg_rx up_req_recv;
 
 	/**
-	 * @lock: protects mst state, primary, dpcd.
+	 * @lock: protects @mst_state, @mst_primary, @dpcd, and
+	 * @payload_id_table_cleared.
 	 */
 	struct mutex lock;
 
@@ -576,7 +577,14 @@ struct drm_dp_mst_topology_mgr {
 	 * @mst_state: If this manager is enabled for an MST capable port. False
 	 * if no MST sink/branch devices is connected.
 	 */
-	bool mst_state;
+	bool mst_state : 1;
+
+	/**
+	 * @payload_id_table_cleared: Whether or not we've cleared the payload
+	 * ID table for @mst_primary. Protected by @lock.
+	 */
+	bool payload_id_table_cleared : 1;
+
 	/**
 	 * @mst_primary: Pointer to the primary/first branch device.
 	 */
diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h
index f06164f44efe..5623994b6e9e 100644
--- a/include/drm/drm_encoder.h
+++ b/include/drm/drm_encoder.h
@@ -172,7 +172,12 @@ struct drm_encoder {
 	 * &drm_connector_state.crtc.
 	 */
 	struct drm_crtc *crtc;
-	struct drm_bridge *bridge;
+
+	/**
+	 * @bridge_chain: Bridges attached to this encoder.
+	 */
+	struct list_head bridge_chain;
+
 	const struct drm_encoder_funcs *funcs;
 	const struct drm_encoder_helper_funcs *helper_private;
 };
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 2338e9f94a03..1c6633da0f91 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -231,8 +231,6 @@ void drm_fb_helper_fill_info(struct fb_info *info,
 			     struct drm_fb_helper *fb_helper,
 			     struct drm_fb_helper_surface_size *sizes);
 
-void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper);
-
 void drm_fb_helper_deferred_io(struct fb_info *info,
 			       struct list_head *pagelist);
 
@@ -269,18 +267,9 @@ int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
 int drm_fb_helper_debug_enter(struct fb_info *info);
 int drm_fb_helper_debug_leave(struct fb_info *info);
 
-int drm_fb_helper_fbdev_setup(struct drm_device *dev,
-			      struct drm_fb_helper *fb_helper,
-			      const struct drm_fb_helper_funcs *funcs,
-			      unsigned int preferred_bpp,
-			      unsigned int max_conn_count);
-void drm_fb_helper_fbdev_teardown(struct drm_device *dev);
-
 void drm_fb_helper_lastclose(struct drm_device *dev);
 void drm_fb_helper_output_poll_changed(struct drm_device *dev);
 
-int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper,
-				struct drm_fb_helper_surface_size *sizes);
 int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp);
 #else
 static inline void drm_fb_helper_prepare(struct drm_device *dev,
@@ -363,10 +352,6 @@ static inline int drm_fb_helper_ioctl(struct fb_info *info, unsigned int cmd,
 	return 0;
 }
 
-static inline void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
-{
-}
-
 static inline void drm_fb_helper_deferred_io(struct fb_info *info,
 					     struct list_head *pagelist)
 {
@@ -452,24 +437,6 @@ static inline int drm_fb_helper_debug_leave(struct fb_info *info)
 	return 0;
 }
 
-static inline int
-drm_fb_helper_fbdev_setup(struct drm_device *dev,
-			  struct drm_fb_helper *fb_helper,
-			  const struct drm_fb_helper_funcs *funcs,
-			  unsigned int preferred_bpp,
-			  unsigned int max_conn_count)
-{
-	/* So drivers can use it to free the struct */
-	dev->fb_helper = fb_helper;
-
-	return 0;
-}
-
-static inline void drm_fb_helper_fbdev_teardown(struct drm_device *dev)
-{
-	dev->fb_helper = NULL;
-}
-
 static inline void drm_fb_helper_lastclose(struct drm_device *dev)
 {
 }
@@ -479,13 +446,6 @@ static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev)
 }
 
 static inline int
-drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper,
-			    struct drm_fb_helper_surface_size *sizes)
-{
-	return 0;
-}
-
-static inline int
 drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)
 {
 	return 0;
diff --git a/include/drm/drm_gem.h b/include/drm/drm_gem.h
index 97a48165642c..0b375069cd48 100644
--- a/include/drm/drm_gem.h
+++ b/include/drm/drm_gem.h
@@ -159,9 +159,7 @@ struct drm_gem_object_funcs {
 	 *
 	 * The callback is used by by both drm_gem_mmap_obj() and
 	 * drm_gem_prime_mmap().  When @mmap is present @vm_ops is not
-	 * used, the @mmap callback must set vma->vm_ops instead. The @mmap
-	 * callback is always called with a 0 offset. The caller will remove
-	 * the fake offset as necessary.
+	 * used, the @mmap callback must set vma->vm_ops instead.
 	 */
 	int (*mmap)(struct drm_gem_object *obj, struct vm_area_struct *vma);
 
diff --git a/include/drm/drm_gem_vram_helper.h b/include/drm/drm_gem_vram_helper.h
index e040541a105f..573e9fd109bf 100644
--- a/include/drm/drm_gem_vram_helper.h
+++ b/include/drm/drm_gem_vram_helper.h
@@ -16,7 +16,6 @@ struct drm_mode_create_dumb;
 struct drm_plane;
 struct drm_plane_state;
 struct drm_simple_display_pipe;
-struct drm_vram_mm_funcs;
 struct filp;
 struct vm_area_struct;
 
@@ -94,10 +93,8 @@ static inline struct drm_gem_vram_object *drm_gem_vram_of_gem(
 }
 
 struct drm_gem_vram_object *drm_gem_vram_create(struct drm_device *dev,
-						struct ttm_bo_device *bdev,
 						size_t size,
-						unsigned long pg_align,
-						bool interruptible);
+						unsigned long pg_align);
 void drm_gem_vram_put(struct drm_gem_vram_object *gbo);
 u64 drm_gem_vram_mmap_offset(struct drm_gem_vram_object *gbo);
 s64 drm_gem_vram_offset(struct drm_gem_vram_object *gbo);
@@ -111,9 +108,8 @@ void drm_gem_vram_vunmap(struct drm_gem_vram_object *gbo, void *vaddr);
 
 int drm_gem_vram_fill_create_dumb(struct drm_file *file,
 				  struct drm_device *dev,
-				  struct ttm_bo_device *bdev,
 				  unsigned long pg_align,
-				  bool interruptible,
+				  unsigned long pitch_align,
 				  struct drm_mode_create_dumb *args);
 
 /*
diff --git a/include/drm/drm_legacy.h b/include/drm/drm_legacy.h
index 58dc0c04bf99..5745710453c8 100644
--- a/include/drm/drm_legacy.h
+++ b/include/drm/drm_legacy.h
@@ -38,7 +38,9 @@
 #include <drm/drm_hashtab.h>
 
 struct drm_device;
+struct drm_driver;
 struct file;
+struct pci_driver;
 
 /*
  * Legacy Support for palateontologic DRM drivers
@@ -188,8 +190,33 @@ do {										\
 void drm_legacy_idlelock_take(struct drm_lock_data *lock);
 void drm_legacy_idlelock_release(struct drm_lock_data *lock);
 
-/* drm_pci.c dma alloc wrappers */
+/* drm_pci.c */
+
+#ifdef CONFIG_PCI
+
 void __drm_legacy_pci_free(struct drm_device *dev, drm_dma_handle_t * dmah);
+int drm_legacy_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
+void drm_legacy_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
+
+#else
+
+static inline void __drm_legacy_pci_free(struct drm_device *dev,
+					 drm_dma_handle_t *dmah)
+{
+}
+
+static inline int drm_legacy_pci_init(struct drm_driver *driver,
+				      struct pci_driver *pdriver)
+{
+	return -EINVAL;
+}
+
+static inline void drm_legacy_pci_exit(struct drm_driver *driver,
+				       struct pci_driver *pdriver)
+{
+}
+
+#endif
 
 /* drm_memory.c */
 void drm_legacy_ioremap(struct drm_local_map *map, struct drm_device *dev);
diff --git a/include/drm/drm_of.h b/include/drm/drm_of.h
index ead34ab5ca4e..b9b093add92e 100644
--- a/include/drm/drm_of.h
+++ b/include/drm/drm_of.h
@@ -16,6 +16,18 @@ struct drm_panel;
 struct drm_bridge;
 struct device_node;
 
+/**
+ * enum drm_lvds_dual_link_pixels - Pixel order of an LVDS dual-link connection
+ * @DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS: Even pixels are expected to be generated
+ *    from the first port, odd pixels from the second port
+ * @DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS: Odd pixels are expected to be generated
+ *    from the first port, even pixels from the second port
+ */
+enum drm_lvds_dual_link_pixels {
+	DRM_LVDS_DUAL_LINK_EVEN_ODD_PIXELS = 0,
+	DRM_LVDS_DUAL_LINK_ODD_EVEN_PIXELS = 1,
+};
+
 #ifdef CONFIG_OF
 uint32_t drm_of_crtc_port_mask(struct drm_device *dev,
 			    struct device_node *port);
@@ -35,6 +47,8 @@ int drm_of_find_panel_or_bridge(const struct device_node *np,
 				int port, int endpoint,
 				struct drm_panel **panel,
 				struct drm_bridge **bridge);
+int drm_of_lvds_get_dual_link_pixel_order(const struct device_node *port1,
+					  const struct device_node *port2);
 #else
 static inline uint32_t drm_of_crtc_port_mask(struct drm_device *dev,
 					  struct device_node *port)
@@ -77,6 +91,13 @@ static inline int drm_of_find_panel_or_bridge(const struct device_node *np,
 {
 	return -EINVAL;
 }
+
+static inline int
+drm_of_lvds_get_dual_link_pixel_order(const struct device_node *port1,
+				      const struct device_node *port2)
+{
+	return -EINVAL;
+}
 #endif
 
 /*
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index ce8da64022b4..121f7aabccd1 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -28,6 +28,7 @@
 #include <linux/errno.h>
 #include <linux/list.h>
 
+struct backlight_device;
 struct device_node;
 struct drm_connector;
 struct drm_device;
@@ -59,12 +60,18 @@ struct display_timing;
  *
  * To save power when no video data is transmitted, a driver can power down
  * the panel. This is the job of the .unprepare() function.
+ *
+ * Backlight can be handled automatically if configured using
+ * drm_panel_of_backlight(). Then the driver does not need to implement the
+ * functionality to enable/disable backlight.
  */
 struct drm_panel_funcs {
 	/**
 	 * @prepare:
 	 *
 	 * Turn on panel and perform set up.
+	 *
+	 * This function is optional.
 	 */
 	int (*prepare)(struct drm_panel *panel);
 
@@ -72,6 +79,8 @@ struct drm_panel_funcs {
 	 * @enable:
 	 *
 	 * Enable panel (turn on back light, etc.).
+	 *
+	 * This function is optional.
 	 */
 	int (*enable)(struct drm_panel *panel);
 
@@ -79,6 +88,8 @@ struct drm_panel_funcs {
 	 * @disable:
 	 *
 	 * Disable panel (turn off back light, etc.).
+	 *
+	 * This function is optional.
 	 */
 	int (*disable)(struct drm_panel *panel);
 
@@ -86,22 +97,29 @@ struct drm_panel_funcs {
 	 * @unprepare:
 	 *
 	 * Turn off panel.
+	 *
+	 * This function is optional.
 	 */
 	int (*unprepare)(struct drm_panel *panel);
 
 	/**
 	 * @get_modes:
 	 *
-	 * Add modes to the connector that the panel is attached to and
-	 * return the number of modes added.
+	 * Add modes to the connector that the panel is attached to
+	 * and returns the number of modes added.
+	 *
+	 * This function is mandatory.
 	 */
-	int (*get_modes)(struct drm_panel *panel);
+	int (*get_modes)(struct drm_panel *panel,
+			 struct drm_connector *connector);
 
 	/**
 	 * @get_timings:
 	 *
 	 * Copy display timings into the provided array and return
 	 * the number of display timings available.
+	 *
+	 * This function is optional.
 	 */
 	int (*get_timings)(struct drm_panel *panel, unsigned int num_timings,
 			   struct display_timing *timings);
@@ -112,25 +130,22 @@ struct drm_panel_funcs {
  */
 struct drm_panel {
 	/**
-	 * @drm:
-	 *
-	 * DRM device owning the panel.
-	 */
-	struct drm_device *drm;
-
-	/**
-	 * @connector:
+	 * @dev:
 	 *
-	 * DRM connector that the panel is attached to.
+	 * Parent device of the panel.
 	 */
-	struct drm_connector *connector;
+	struct device *dev;
 
 	/**
-	 * @dev:
+	 * @backlight:
 	 *
-	 * Parent device of the panel.
+	 * Backlight device, used to turn on backlight after the call
+	 * to enable(), and to turn off backlight before the call to
+	 * disable().
+	 * backlight is set by drm_panel_of_backlight() and drivers
+	 * shall not assign it.
 	 */
-	struct device *dev;
+	struct backlight_device *backlight;
 
 	/**
 	 * @funcs:
@@ -172,7 +187,7 @@ int drm_panel_unprepare(struct drm_panel *panel);
 int drm_panel_enable(struct drm_panel *panel);
 int drm_panel_disable(struct drm_panel *panel);
 
-int drm_panel_get_modes(struct drm_panel *panel);
+int drm_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector);
 
 #if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
 struct drm_panel *of_drm_find_panel(const struct device_node *np);
@@ -183,4 +198,13 @@ static inline struct drm_panel *of_drm_find_panel(const struct device_node *np)
 }
 #endif
 
+#if IS_REACHABLE(CONFIG_BACKLIGHT_CLASS_DEVICE)
+int drm_panel_of_backlight(struct drm_panel *panel);
+#else
+static inline int drm_panel_of_backlight(struct drm_panel *panel)
+{
+	return 0;
+}
+#endif
+
 #endif
diff --git a/include/drm/drm_pci.h b/include/drm/drm_pci.h
index 8181e9e7cf1d..9031e217b506 100644
--- a/include/drm/drm_pci.h
+++ b/include/drm/drm_pci.h
@@ -39,23 +39,36 @@ struct drm_device;
 struct drm_driver;
 struct drm_master;
 
+#ifdef CONFIG_PCI
+
 struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev, size_t size,
 				     size_t align);
 void drm_pci_free(struct drm_device *dev, struct drm_dma_handle * dmah);
 
-int drm_legacy_pci_init(struct drm_driver *driver, struct pci_driver *pdriver);
-void drm_legacy_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver);
-#ifdef CONFIG_PCI
 int drm_get_pci_dev(struct pci_dev *pdev,
 		    const struct pci_device_id *ent,
 		    struct drm_driver *driver);
+
 #else
+
+static inline struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev,
+						   size_t size, size_t align)
+{
+	return NULL;
+}
+
+static inline void drm_pci_free(struct drm_device *dev,
+				struct drm_dma_handle *dmah)
+{
+}
+
 static inline int drm_get_pci_dev(struct pci_dev *pdev,
 				  const struct pci_device_id *ent,
 				  struct drm_driver *driver)
 {
 	return -ENOSYS;
 }
+
 #endif
 
 #endif /* _DRM_PCI_H_ */
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 5b8049992c24..8f99d389792d 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -34,7 +34,8 @@
 
 #include <drm/drm.h>
 
-extern unsigned int drm_debug;
+/* Do *not* use outside of drm_print.[ch]! */
+extern unsigned int __drm_debug;
 
 /**
  * DOC: print
@@ -248,87 +249,90 @@ static inline struct drm_printer drm_err_printer(const char *prefix)
 	return p;
 }
 
-/*
- * The following categories are defined:
- *
- * CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c, drm_memory.c, ...
- *	 This is the category used by the DRM_DEBUG() macro.
- *
- * DRIVER: Used in the vendor specific part of the driver: i915, radeon, ...
- *	   This is the category used by the DRM_DEBUG_DRIVER() macro.
- *
- * KMS: used in the modesetting code.
- *	This is the category used by the DRM_DEBUG_KMS() macro.
- *
- * PRIME: used in the prime code.
- *	  This is the category used by the DRM_DEBUG_PRIME() macro.
+/**
+ * enum drm_debug_category - The DRM debug categories
  *
- * ATOMIC: used in the atomic code.
- *	  This is the category used by the DRM_DEBUG_ATOMIC() macro.
+ * Each of the DRM debug logging macros use a specific category, and the logging
+ * is filtered by the drm.debug module parameter. This enum specifies the values
+ * for the interface.
  *
- * VBL: used for verbose debug message in the vblank code
- *	  This is the category used by the DRM_DEBUG_VBL() macro.
+ * Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except
+ * DRM_DEBUG() logs to DRM_UT_CORE.
  *
- * Enabling verbose debug messages is done through the drm.debug parameter,
- * each category being enabled by a bit.
+ * Enabling verbose debug messages is done through the drm.debug parameter, each
+ * category being enabled by a bit:
  *
- * drm.debug=0x1 will enable CORE messages
- * drm.debug=0x2 will enable DRIVER messages
- * drm.debug=0x3 will enable CORE and DRIVER messages
- * ...
- * drm.debug=0x3f will enable all messages
+ *  - drm.debug=0x1 will enable CORE messages
+ *  - drm.debug=0x2 will enable DRIVER messages
+ *  - drm.debug=0x3 will enable CORE and DRIVER messages
+ *  - ...
+ *  - drm.debug=0x1ff will enable all messages
  *
  * An interesting feature is that it's possible to enable verbose logging at
- * run-time by echoing the debug value in its sysfs node:
+ * run-time by echoing the debug value in its sysfs node::
+ *
  *   # echo 0xf > /sys/module/drm/parameters/debug
+ *
  */
-#define DRM_UT_NONE		0x00
-#define DRM_UT_CORE		0x01
-#define DRM_UT_DRIVER		0x02
-#define DRM_UT_KMS		0x04
-#define DRM_UT_PRIME		0x08
-#define DRM_UT_ATOMIC		0x10
-#define DRM_UT_VBL		0x20
-#define DRM_UT_STATE		0x40
-#define DRM_UT_LEASE		0x80
-#define DRM_UT_DP		0x100
-
-static inline bool drm_debug_enabled(unsigned int category)
+enum drm_debug_category {
+	/**
+	 * @DRM_UT_CORE: Used in the generic drm code: drm_ioctl.c, drm_mm.c,
+	 * drm_memory.c, ...
+	 */
+	DRM_UT_CORE		= 0x01,
+	/**
+	 * @DRM_UT_DRIVER: Used in the vendor specific part of the driver: i915,
+	 * radeon, ... macro.
+	 */
+	DRM_UT_DRIVER		= 0x02,
+	/**
+	 * @DRM_UT_KMS: Used in the modesetting code.
+	 */
+	DRM_UT_KMS		= 0x04,
+	/**
+	 * @DRM_UT_PRIME: Used in the prime code.
+	 */
+	DRM_UT_PRIME		= 0x08,
+	/**
+	 * @DRM_UT_ATOMIC: Used in the atomic code.
+	 */
+	DRM_UT_ATOMIC		= 0x10,
+	/**
+	 * @DRM_UT_VBL: Used for verbose debug message in the vblank code.
+	 */
+	DRM_UT_VBL		= 0x20,
+	/**
+	 * @DRM_UT_STATE: Used for verbose atomic state debugging.
+	 */
+	DRM_UT_STATE		= 0x40,
+	/**
+	 * @DRM_UT_LEASE: Used in the lease code.
+	 */
+	DRM_UT_LEASE		= 0x80,
+	/**
+	 * @DRM_UT_DP: Used in the DP code.
+	 */
+	DRM_UT_DP		= 0x100,
+};
+
+static inline bool drm_debug_enabled(enum drm_debug_category category)
 {
-	return unlikely(drm_debug & category);
+	return unlikely(__drm_debug & category);
 }
 
+/*
+ * struct device based logging
+ *
+ * Prefer drm_device based logging over device or prink based logging.
+ */
+
 __printf(3, 4)
 void drm_dev_printk(const struct device *dev, const char *level,
 		    const char *format, ...);
 __printf(3, 4)
-void drm_dev_dbg(const struct device *dev, unsigned int category,
+void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
 		 const char *format, ...);
 
-__printf(2, 3)
-void drm_dbg(unsigned int category, const char *format, ...);
-__printf(1, 2)
-void drm_err(const char *format, ...);
-
-/* Macros to make printk easier */
-
-#define _DRM_PRINTK(once, level, fmt, ...)				\
-	printk##once(KERN_##level "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
-
-#define DRM_INFO(fmt, ...)						\
-	_DRM_PRINTK(, INFO, fmt, ##__VA_ARGS__)
-#define DRM_NOTE(fmt, ...)						\
-	_DRM_PRINTK(, NOTICE, fmt, ##__VA_ARGS__)
-#define DRM_WARN(fmt, ...)						\
-	_DRM_PRINTK(, WARNING, fmt, ##__VA_ARGS__)
-
-#define DRM_INFO_ONCE(fmt, ...)						\
-	_DRM_PRINTK(_once, INFO, fmt, ##__VA_ARGS__)
-#define DRM_NOTE_ONCE(fmt, ...)						\
-	_DRM_PRINTK(_once, NOTICE, fmt, ##__VA_ARGS__)
-#define DRM_WARN_ONCE(fmt, ...)						\
-	_DRM_PRINTK(_once, WARNING, fmt, ##__VA_ARGS__)
-
 /**
  * Error output.
  *
@@ -337,8 +341,6 @@ void drm_err(const char *format, ...);
  */
 #define DRM_DEV_ERROR(dev, fmt, ...)					\
 	drm_dev_printk(dev, KERN_ERR, "*ERROR* " fmt, ##__VA_ARGS__)
-#define DRM_ERROR(fmt, ...)						\
-	drm_err(fmt, ##__VA_ARGS__)
 
 /**
  * Rate limited error output.  Like DRM_ERROR() but won't flood the log.
@@ -355,10 +357,8 @@ void drm_err(const char *format, ...);
 	if (__ratelimit(&_rs))						\
 		DRM_DEV_ERROR(dev, fmt, ##__VA_ARGS__);			\
 })
-#define DRM_ERROR_RATELIMITED(fmt, ...)					\
-	DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
 
-#define DRM_DEV_INFO(dev, fmt, ...)					\
+#define DRM_DEV_INFO(dev, fmt, ...)				\
 	drm_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__)
 
 #define DRM_DEV_INFO_ONCE(dev, fmt, ...)				\
@@ -378,41 +378,18 @@ void drm_err(const char *format, ...);
  */
 #define DRM_DEV_DEBUG(dev, fmt, ...)					\
 	drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
-#define DRM_DEBUG(fmt, ...)						\
-	drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...)				\
 	drm_dev_dbg(dev, DRM_UT_DRIVER,	fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_DRIVER(fmt, ...)					\
-	drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_KMS(dev, fmt, ...)				\
 	drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_KMS(fmt, ...)						\
-	drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_PRIME(dev, fmt, ...)				\
 	drm_dev_dbg(dev, DRM_UT_PRIME, fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_PRIME(fmt, ...)					\
-	drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_ATOMIC(dev, fmt, ...)				\
 	drm_dev_dbg(dev, DRM_UT_ATOMIC,	fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_ATOMIC(fmt, ...)					\
-	drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_VBL(dev, fmt, ...)				\
 	drm_dev_dbg(dev, DRM_UT_VBL, fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_VBL(fmt, ...)						\
-	drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
-
-#define DRM_DEBUG_LEASE(fmt, ...)					\
-	drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__)
-
 #define	DRM_DEV_DEBUG_DP(dev, fmt, ...)					\
 	drm_dev_dbg(dev, DRM_UT_DP, fmt, ## __VA_ARGS__)
-#define DRM_DEBUG_DP(fmt, ...)						\
-	drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
 
 #define _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, category, fmt, ...)	\
 ({									\
@@ -432,24 +409,147 @@ void drm_err(const char *format, ...);
 #define DRM_DEV_DEBUG_RATELIMITED(dev, fmt, ...)			\
 	_DEV_DRM_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_CORE,		\
 					  fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_RATELIMITED(fmt, ...)					\
-	DRM_DEV_DEBUG_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_DRIVER_RATELIMITED(dev, fmt, ...)			\
 	_DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_DRIVER,		\
 					  fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_DRIVER_RATELIMITED(fmt, ...)				\
-	DRM_DEV_DEBUG_DRIVER_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_KMS_RATELIMITED(dev, fmt, ...)			\
 	_DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_KMS,		\
 					  fmt, ##__VA_ARGS__)
-#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...)				\
-	DRM_DEV_DEBUG_KMS_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
-
 #define DRM_DEV_DEBUG_PRIME_RATELIMITED(dev, fmt, ...)			\
 	_DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, DRM_UT_PRIME,		\
 					  fmt, ##__VA_ARGS__)
+
+/*
+ * struct drm_device based logging
+ *
+ * Prefer drm_device based logging over device or prink based logging.
+ */
+
+/* Helper for struct drm_device based logging. */
+#define __drm_printk(drm, level, type, fmt, ...)			\
+	dev_##level##type((drm)->dev, "[drm] " fmt, ##__VA_ARGS__)
+
+
+#define drm_info(drm, fmt, ...)					\
+	__drm_printk((drm), info,, fmt, ##__VA_ARGS__)
+
+#define drm_notice(drm, fmt, ...)				\
+	__drm_printk((drm), notice,, fmt, ##__VA_ARGS__)
+
+#define drm_warn(drm, fmt, ...)					\
+	__drm_printk((drm), warn,, fmt, ##__VA_ARGS__)
+
+#define drm_err(drm, fmt, ...)					\
+	__drm_printk((drm), err,, "*ERROR* " fmt, ##__VA_ARGS__)
+
+
+#define drm_info_once(drm, fmt, ...)				\
+	__drm_printk((drm), info, _once, fmt, ##__VA_ARGS__)
+
+#define drm_notice_once(drm, fmt, ...)				\
+	__drm_printk((drm), notice, _once, fmt, ##__VA_ARGS__)
+
+#define drm_warn_once(drm, fmt, ...)				\
+	__drm_printk((drm), warn, _once, fmt, ##__VA_ARGS__)
+
+#define drm_err_once(drm, fmt, ...)				\
+	__drm_printk((drm), err, _once, "*ERROR* " fmt, ##__VA_ARGS__)
+
+
+#define drm_err_ratelimited(drm, fmt, ...)				\
+	__drm_printk((drm), err, _ratelimited, "*ERROR* " fmt, ##__VA_ARGS__)
+
+
+#define drm_dbg_core(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
+#define drm_dbg(drm, fmt, ...)						\
+	drm_dev_dbg((drm)->dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+#define drm_dbg_kms(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
+#define drm_dbg_prime(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_PRIME, fmt, ##__VA_ARGS__)
+#define drm_dbg_atomic(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
+#define drm_dbg_vbl(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_VBL, fmt, ##__VA_ARGS__)
+#define drm_dbg_state(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_STATE, fmt, ##__VA_ARGS__)
+#define drm_dbg_lease(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_LEASE, fmt, ##__VA_ARGS__)
+#define drm_dbg_dp(drm, fmt, ...)					\
+	drm_dev_dbg((drm)->dev, DRM_UT_DP, fmt, ##__VA_ARGS__)
+
+
+/*
+ * printk based logging
+ *
+ * Prefer drm_device based logging over device or prink based logging.
+ */
+
+__printf(2, 3)
+void __drm_dbg(enum drm_debug_category category, const char *format, ...);
+__printf(1, 2)
+void __drm_err(const char *format, ...);
+
+/* Macros to make printk easier */
+
+#define _DRM_PRINTK(once, level, fmt, ...)				\
+	printk##once(KERN_##level "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
+
+#define DRM_INFO(fmt, ...)						\
+	_DRM_PRINTK(, INFO, fmt, ##__VA_ARGS__)
+#define DRM_NOTE(fmt, ...)						\
+	_DRM_PRINTK(, NOTICE, fmt, ##__VA_ARGS__)
+#define DRM_WARN(fmt, ...)						\
+	_DRM_PRINTK(, WARNING, fmt, ##__VA_ARGS__)
+
+#define DRM_INFO_ONCE(fmt, ...)						\
+	_DRM_PRINTK(_once, INFO, fmt, ##__VA_ARGS__)
+#define DRM_NOTE_ONCE(fmt, ...)						\
+	_DRM_PRINTK(_once, NOTICE, fmt, ##__VA_ARGS__)
+#define DRM_WARN_ONCE(fmt, ...)						\
+	_DRM_PRINTK(_once, WARNING, fmt, ##__VA_ARGS__)
+
+#define DRM_ERROR(fmt, ...)						\
+	__drm_err(fmt, ##__VA_ARGS__)
+
+#define DRM_ERROR_RATELIMITED(fmt, ...)					\
+	DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG(fmt, ...)						\
+	__drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_DRIVER(fmt, ...)					\
+	__drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_KMS(fmt, ...)						\
+	__drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_PRIME(fmt, ...)					\
+	__drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_ATOMIC(fmt, ...)					\
+	__drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_VBL(fmt, ...)						\
+	__drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_LEASE(fmt, ...)					\
+	__drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_DP(fmt, ...)						\
+	__drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
+
+
+#define DRM_DEBUG_RATELIMITED(fmt, ...)					\
+	DRM_DEV_DEBUG_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_DRIVER_RATELIMITED(fmt, ...)				\
+	DRM_DEV_DEBUG_DRIVER_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
+
+#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...)				\
+	DRM_DEV_DEBUG_KMS_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
+
 #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)				\
 	DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
 
diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h
index cd0106135b6a..57a3be9e53e4 100644
--- a/include/drm/drm_rect.h
+++ b/include/drm/drm_rect.h
@@ -24,6 +24,8 @@
 #ifndef DRM_RECT_H
 #define DRM_RECT_H
 
+#include <linux/types.h>
+
 /**
  * DOC: rect utils
  *
diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h
index f92eb2094d6b..6a483533aae4 100644
--- a/include/drm/drm_scdc_helper.h
+++ b/include/drm/drm_scdc_helper.h
@@ -50,9 +50,9 @@
 #define  SCDC_READ_REQUEST_ENABLE (1 << 0)
 
 #define SCDC_STATUS_FLAGS_0 0x40
-#define  SCDC_CH2_LOCK (1 < 3)
-#define  SCDC_CH1_LOCK (1 < 2)
-#define  SCDC_CH0_LOCK (1 < 1)
+#define  SCDC_CH2_LOCK (1 << 3)
+#define  SCDC_CH1_LOCK (1 << 2)
+#define  SCDC_CH0_LOCK (1 << 1)
 #define  SCDC_CH_LOCK_MASK (SCDC_CH2_LOCK | SCDC_CH1_LOCK | SCDC_CH0_LOCK)
 #define  SCDC_CLOCK_DETECT (1 << 0)
 
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 65e399d280f7..66ca49db9633 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -154,7 +154,6 @@ struct ttm_tt;
  * @offset: The current GPU offset, which can have different meanings
  * depending on the memory type. For SYSTEM type memory, it should be 0.
  * @cur_placement: Hint of current placement.
- * @wu_mutex: Wait unreserved mutex.
  *
  * Base class for TTM buffer object, that deals with data placement and CPU
  * mappings. GPU mappings are really up to the driver, but for simpler GPUs
@@ -222,8 +221,6 @@ struct ttm_buffer_object {
 	uint64_t offset; /* GPU address space is independent of CPU word size */
 
 	struct sg_table *sg;
-
-	struct mutex wu_mutex;
 };
 
 /**
@@ -707,7 +704,6 @@ ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp,
 int ttm_bo_swapout(struct ttm_bo_global *glob,
 			struct ttm_operation_ctx *ctx);
 void ttm_bo_swapout_all(struct ttm_bo_device *bdev);
-int ttm_bo_wait_unreserved(struct ttm_buffer_object *bo);
 
 /**
  * ttm_bo_uses_embedded_gem_object - check if the given bo uses the
@@ -738,7 +734,13 @@ vm_fault_t ttm_bo_vm_fault_reserved(struct vm_fault *vmf,
 				    pgprot_t prot,
 				    pgoff_t num_prefault);
 
+vm_fault_t ttm_bo_vm_fault(struct vm_fault *vmf);
+
 void ttm_bo_vm_open(struct vm_area_struct *vma);
 
 void ttm_bo_vm_close(struct vm_area_struct *vma);
+
+int ttm_bo_vm_access(struct vm_area_struct *vma, unsigned long addr,
+		     void *buf, int len, int write);
+
 #endif