ethtool: allow custom interval for physical identification

When physical identification of an adapter is done by toggling the
mechanism on and off through software utilizing the set_phys_id operation,
it is done with a fixed duration for both on and off states.  Some drivers
may want to set a custom duration for the on/off intervals.  This patch
changes the API so the return code from the driver's entry point when it
is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to
cycle the on/off states, and updates the drivers that have already been
converted to use the new set_phys_id and use the synchronous method for
identifying an adapter.

The physical identification frequency set in the updated drivers is based
on how it was done prior to the introduction of set_phys_id.

Compile tested only.  Also fixes a compiler warning in sfc.

v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE
v3: fold patchset into single patch and cleanup per Ben's feedback

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Sathya Perla <sathya.perla@emulex.com>
Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com>
Cc: Ajit Khaparde <ajit.khaparde@emulex.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: Don Fry <pcnet32@frontier.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Steve Hodgson <shodgson@solarflare.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Matt Carlson <mcarlson@broadcom.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 files changed, 14 insertions, 14 deletions

diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 96f5502e0ef7..80226e4801f3 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -516,7 +516,7 @@ be_set_phys_id(struct net_device *netdev,
 	case ETHTOOL_ID_ACTIVE:
 		be_cmd_get_beacon_state(adapter, adapter->hba_port_num,
 					&adapter->beacon_state);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		be_cmd_set_beacon_state(adapter, adapter->hba_port_num, 0, 0,
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0a52079bafef..bf729ee6acbd 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7473,7 +7473,7 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state)
 
 		bp->leds_save = REG_RD(bp, BNX2_MISC_CFG);
 		REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index ad7d91e499f4..0a5e88d6ba2c 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -2025,7 +2025,7 @@ static int bnx2x_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		bnx2x_set_led(&bp->link_params, &bp->link_vars,
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 802c7a7c3b25..a087e0691dce 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1757,7 +1757,7 @@ static int set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_OFF:
 		t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL, 0);
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
index c7ce4438e923..17b6027d8be8 100644
--- a/drivers/net/ewrk3.c
+++ b/drivers/net/ewrk3.c
@@ -1618,7 +1618,7 @@ static int ewrk3_set_phys_id(struct net_device *dev,
 		/* Prevent ISR from twiddling the LED */
 		lp->led_mask = 0;
 		spin_unlock_irq(&lp->hw_lock);
-		return -EINVAL;
+		return 2;	/* cycle on/off twice per second */
 
 	case ETHTOOL_ID_ON:
 		cr = inb(EWRK3_CR);
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 3fa1e9cdb4a8..ea2272f0f37e 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -7896,7 +7896,7 @@ static int niu_set_phys_id(struct net_device *dev,
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
 		np->orig_led_state = niu_led_state_save(np);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		niu_force_led(np, 1);
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index e89afb929740..0a1efbae1bc0 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1038,7 +1038,7 @@ static int pcnet32_set_phys_id(struct net_device *dev,
 		for (i = 4; i < 8; i++)
 			lp->save_regs[i - 4] = a->read_bcr(ioaddr, i);
 		spin_unlock_irqrestore(&lp->lock, flags);
-		return -EINVAL;
+		return 2;	/* cycle on/off twice per second */
 
 	case ETHTOOL_ID_ON:
 	case ETHTOOL_ID_OFF:
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 2d5cc6142c04..2302d9743744 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -5541,7 +5541,7 @@ static int s2io_ethtool_set_led(struct net_device *dev,
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
 		sp->adapt_ctrl_org = readq(&bar0->gpio_control);
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		s2io_set_led(sp, true);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 644f7c1d6e7b..5d8468fc5804 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -182,7 +182,7 @@ static int efx_ethtool_phys_id(struct net_device *net_dev,
 			       enum ethtool_phys_id_state state)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	enum efx_led_mode mode;
+	enum efx_led_mode mode = EFX_LED_DEFAULT;
 
 	switch (state) {
 	case ETHTOOL_ID_ON:
@@ -194,8 +194,8 @@ static int efx_ethtool_phys_id(struct net_device *net_dev,
 	case ETHTOOL_ID_INACTIVE:
 		mode = EFX_LED_DEFAULT;
 		break;
-	default:
-		return -EINVAL;
+	case ETHTOOL_ID_ACTIVE:
+		return 1;	/* cycle on/off once per second */
 	}
 
 	efx->type->set_id_led(efx, mode);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 310dcbce2519..176d784cbb54 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -753,7 +753,7 @@ static int skge_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 2;	/* cycle on/off twice per second */
 
 	case ETHTOOL_ID_ON:
 		skge_led(skge, LED_MODE_TST);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a4b8fe564eb0..c8d045114c66 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3813,7 +3813,7 @@ static int sky2_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 	case ETHTOOL_ID_INACTIVE:
 		sky2_led(sky2, MO_LED_NORM);
 		break;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 10fa476fede3..9915734ac3e9 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10384,7 +10384,7 @@ static int tg3_set_phys_id(struct net_device *dev,
 
 	switch (state) {
 	case ETHTOOL_ID_ACTIVE:
-		return -EINVAL;
+		return 1;	/* cycle on/off once per second */
 
 	case ETHTOOL_ID_ON:
 		tw32(MAC_LED_CTRL, LED_CTRL_LNKLED_OVERRIDE |