diff options
| author | Jarod Wilson <jarod@redhat.com> | 2011-07-18 16:54:28 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2011-08-27 08:56:39 -0300 |
| commit | e217fb43c47830857a685673ae0dc3e28493bb88 (patch) | |
| tree | cbe429b68ec0e79c2e078b86c953a0ecd599de2e /drivers | |
| parent | b71969bee23ea0c44c594e5027ba26029d27afea (diff) | |
[media] mceusb: report actual tx frequencies
Rather than dumping out hex values, lets print the actual calculated
frequency and period the hardware has been configured for. After this
[ 2643.276215] mceusb 3-1:1.0: tx data: 9f 07 (length=2)
[ 2643.276218] mceusb 3-1:1.0: Get carrier mode and freq
[ 2643.277206] mceusb 3-1:1.0: rx data: 9f 06 01 42 (length=4)
[ 2643.277209] mceusb 3-1:1.0: Got carrier of 37037 Hz (period 27us)
Matches up perfectly with the table in Microsoft's docs.
Of course, I've noticed on one of my devices that the MS-recommended
default value of 1 for carrier pre-scaler and 66 for carrier period was
butchered, and instead of converting 66 to hex (0x42 like above), they
put in 0x66, so the hardware reports a default carrier of 24390Hz.
Fortunately, I guess, this particular device is rx-only, but I wouldn't
put it past other hw to screw up here too.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/media/rc/mceusb.c | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 8fa5a725bed7..e51637f46ab2 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -516,6 +516,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, u8 cmd, subcmd, data1, data2, data3, data4, data5; struct device *dev = ir->dev; int i, start, skip = 0; + u32 carrier, period; if (!debug) return; @@ -613,9 +614,14 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n", data1, data2); break; - case MCE_CMD_SETIRCFS: - dev_info(dev, "%s carrier mode and freq of " - "0x%02x 0x%02x\n", inout, data1, data2); + case MCE_RSP_EQIRCFS: + period = DIV_ROUND_CLOSEST( + (1 << data1 * 2) * (data2 + 1), 10); + if (!period) + break; + carrier = (1000 * 1000) / period; + dev_info(dev, "%s carrier of %u Hz (period %uus)\n", + inout, carrier, period); break; case MCE_CMD_GETIRCFS: dev_info(dev, "Get carrier mode and freq\n"); @@ -626,9 +632,9 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, break; case MCE_RSP_EQIRTIMEOUT: /* value is in units of 50us, so x*50/1000 ms */ + period = ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000; dev_info(dev, "%s receive timeout of %d ms\n", - inout, - ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000); + inout, period); break; case MCE_CMD_GETIRTIMEOUT: dev_info(dev, "Get receive timeout\n"); |