summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorChristian Lamparter <chunkeey@gmail.com>2019-03-22 01:05:03 +0100
committerDavid S. Miller <davem@davemloft.net>2019-03-26 10:47:10 -0700
commitdb460c54b67fc2cbe6dcef88b7bf3cba8e07f80e (patch)
treec63d835133f0528e8fc0176ce48f13e2ca5aa8b1 /drivers
parent1eec7151ae0e134bd42e3f128066b2ff8da21393 (diff)
net: dsa: qca8k: extend slave-bus implementations
This patch implements accessors for the QCA8337 MDIO access through the MDIO_MASTER register, which makes it possible to access the PHYs on slave-bus through the switch. In cases where the switch ports are already mapped via external "phy-phandles", the internal mdio-bus is disabled in order to prevent a duplicated discovery and enumeration of the same PHYs. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/dsa/qca8k.c156
-rw-r--r--drivers/net/dsa/qca8k.h13
2 files changed, 168 insertions, 1 deletions
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 14ad78225f07..c4fa400efdcc 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -481,6 +481,155 @@ qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
}
+static u32
+qca8k_port_to_phy(int port)
+{
+ /* From Andrew Lunn:
+ * Port 0 has no internal phy.
+ * Port 1 has an internal PHY at MDIO address 0.
+ * Port 2 has an internal PHY at MDIO address 1.
+ * ...
+ * Port 5 has an internal PHY at MDIO address 4.
+ * Port 6 has no internal PHY.
+ */
+
+ return port - 1;
+}
+
+static int
+qca8k_mdio_write(struct qca8k_priv *priv, int port, u32 regnum, u16 data)
+{
+ u32 phy, val;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ /* callee is responsible for not passing bad ports,
+ * but we still would like to make spills impossible.
+ */
+ phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
+ QCA8K_MDIO_MASTER_DATA(data);
+
+ qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+
+ return qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+}
+
+static int
+qca8k_mdio_read(struct qca8k_priv *priv, int port, u32 regnum)
+{
+ u32 phy, val;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ /* callee is responsible for not passing bad ports,
+ * but we still would like to make spills impossible.
+ */
+ phy = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+ qca8k_write(priv, QCA8K_MDIO_MASTER_CTRL, val);
+
+ if (qca8k_busy_wait(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY))
+ return -ETIMEDOUT;
+
+ val = (qca8k_read(priv, QCA8K_MDIO_MASTER_CTRL) &
+ QCA8K_MDIO_MASTER_DATA_MASK);
+
+ return val;
+}
+
+static int
+qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ return qca8k_mdio_write(priv, port, regnum, data);
+}
+
+static int
+qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ ret = qca8k_mdio_read(priv, port, regnum);
+
+ if (ret < 0)
+ return 0xffff;
+
+ return ret;
+}
+
+static int
+qca8k_setup_mdio_bus(struct qca8k_priv *priv)
+{
+ u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
+ struct device_node *ports, *port;
+ int err;
+
+ ports = of_get_child_by_name(priv->dev->of_node, "ports");
+ if (!ports)
+ return -EINVAL;
+
+ for_each_available_child_of_node(ports, port) {
+ err = of_property_read_u32(port, "reg", &reg);
+ if (err)
+ return err;
+
+ if (!dsa_is_user_port(priv->ds, reg))
+ continue;
+
+ if (of_property_read_bool(port, "phy-handle"))
+ external_mdio_mask |= BIT(reg);
+ else
+ internal_mdio_mask |= BIT(reg);
+ }
+
+ if (!external_mdio_mask && !internal_mdio_mask) {
+ dev_err(priv->dev, "no PHYs are defined.\n");
+ return -EINVAL;
+ }
+
+ /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
+ * the MDIO_MASTER register also _disconnects_ the external MDC
+ * passthrough to the internal PHYs. It's not possible to use both
+ * configurations at the same time!
+ *
+ * Because this came up during the review process:
+ * If the external mdio-bus driver is capable magically disabling
+ * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
+ * accessors for the time being, it would be possible to pull this
+ * off.
+ */
+ if (!!external_mdio_mask && !!internal_mdio_mask) {
+ dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
+ return -EINVAL;
+ }
+
+ if (external_mdio_mask) {
+ /* Make sure to disable the internal mdio bus in cases
+ * a dt-overlay and driver reload changed the configuration
+ */
+
+ qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
+ return 0;
+ }
+
+ priv->ops.phy_read = qca8k_phy_read;
+ priv->ops.phy_write = qca8k_phy_write;
+ return 0;
+}
+
static int
qca8k_setup(struct dsa_switch *ds)
{
@@ -502,6 +651,10 @@ qca8k_setup(struct dsa_switch *ds)
if (IS_ERR(priv->regmap))
pr_warn("regmap initialization failed");
+ ret = qca8k_setup_mdio_bus(priv);
+ if (ret)
+ return ret;
+
/* Initialize CPU port pad mode (xMII type, delays...) */
phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
if (phy_mode < 0) {
@@ -905,7 +1058,8 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
return -ENOMEM;
priv->ds->priv = priv;
- priv->ds->ops = &qca8k_switch_ops;
+ priv->ops = qca8k_switch_ops;
+ priv->ds->ops = &priv->ops;
mutex_init(&priv->reg_mutex);
dev_set_drvdata(&mdiodev->dev, priv);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index d146e54c8a6c..249fd62268e5 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -49,6 +49,18 @@
#define QCA8K_MIB_FLUSH BIT(24)
#define QCA8K_MIB_CPU_KEEP BIT(20)
#define QCA8K_MIB_BUSY BIT(17)
+#define QCA8K_MDIO_MASTER_CTRL 0x3c
+#define QCA8K_MDIO_MASTER_BUSY BIT(31)
+#define QCA8K_MDIO_MASTER_EN BIT(30)
+#define QCA8K_MDIO_MASTER_READ BIT(27)
+#define QCA8K_MDIO_MASTER_WRITE 0
+#define QCA8K_MDIO_MASTER_SUP_PRE BIT(26)
+#define QCA8K_MDIO_MASTER_PHY_ADDR(x) ((x) << 21)
+#define QCA8K_MDIO_MASTER_REG_ADDR(x) ((x) << 16)
+#define QCA8K_MDIO_MASTER_DATA(x) (x)
+#define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0)
+#define QCA8K_MDIO_MASTER_MAX_PORTS 5
+#define QCA8K_MDIO_MASTER_MAX_REG 32
#define QCA8K_GOL_MAC_ADDR0 0x60
#define QCA8K_GOL_MAC_ADDR1 0x64
#define QCA8K_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
@@ -169,6 +181,7 @@ struct qca8k_priv {
struct dsa_switch *ds;
struct mutex reg_mutex;
struct device *dev;
+ struct dsa_switch_ops ops;
};
struct qca8k_mib_desc {