Merge branch 'net-ReST-convert'

Mauro Carvalho Chehab says:

====================
net: manually convert files to ReST format - part 1

There are very few documents upstream that aren't converted upstream.

This series convert part of the networking text files into ReST.
It is part of a bigger set of patches, which were split on parts,
in order to make reviewing task easier.

The full series (including those ones) are at:

	https://git.linuxtv.org/mchehab/experimental.git/log/?h=net-docs

And the documents, converted to HTML via the building system
are at:

	https://www.infradead.org/~mchehab/kernel_docs/networking/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 18 insertions, 18 deletions

diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 8c37294f1d1e..cfb0d16b60ad 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -306,7 +306,7 @@ config ATM_IA
 	  for more info about the cards. Say Y (or M to compile as a module
 	  named iphase) here if you have one of these cards.
 
-	  See the file <file:Documentation/networking/iphase.txt> for further
+	  See the file <file:Documentation/networking/iphase.rst> for further
 	  details.
 
 config ATM_IA_DEBUG
@@ -336,7 +336,7 @@ config ATM_FORE200E
 	  on PCI and SBUS hosts. Say Y (or M to compile as a module
 	  named fore_200e) here if you have one of these ATM adapters.
 
-	  See the file <file:Documentation/networking/fore200e.txt> for
+	  See the file <file:Documentation/networking/fore200e.rst> for
 	  further details.
 
 config ATM_FORE200E_USE_TASKLET
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b103fbdd0f68..c822f4a6d166 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -50,7 +50,7 @@ config BONDING
 	  The driver supports multiple bonding modes to allow for both high
 	  performance and high availability operation.
 
-	  Refer to <file:Documentation/networking/bonding.txt> for more
+	  Refer to <file:Documentation/networking/bonding.rst> for more
 	  information.
 
 	  To compile this driver as a module, choose M here: the module
@@ -126,7 +126,7 @@ config EQUALIZER
 	  Linux driver or with a Livingston Portmaster 2e.
 
 	  Say Y if you want this and read
-	  <file:Documentation/networking/eql.txt>.  You may also want to read
+	  <file:Documentation/networking/eql.rst>.  You may also want to read
 	  section 6.2 of the NET-3-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
index af509b05ac5c..ccde6479050c 100644
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
@@ -59,7 +59,7 @@ config COPS
 	  package. This driver is experimental, which means that it may not
 	  work. This driver will only work if you choose "AppleTalk DDP"
 	  networking support, above.
-	  Please read the file <file:Documentation/networking/cops.txt>.
+	  Please read the file <file:Documentation/networking/cops.rst>.
 
 config COPS_DAYNA
 	bool "Dayna firmware support"
@@ -86,7 +86,7 @@ config IPDDP
 	  box is stuck on an AppleTalk only network) or decapsulate (e.g. if
 	  you want your Linux box to act as an Internet gateway for a zoo of
 	  AppleTalk connected Macs). Please see the file
-	  <file:Documentation/networking/ipddp.txt> for more information.
+	  <file:Documentation/networking/ipddp.rst> for more information.
 
 	  If you say Y here, the AppleTalk-IP support will be compiled into
 	  the kernel. In this case, you can either use encapsulation or
@@ -107,4 +107,4 @@ config IPDDP_ENCAP
 	  IP packets inside AppleTalk frames; this is useful if your Linux box
 	  is stuck on an AppleTalk network (which hopefully contains a
 	  decapsulator somewhere). Please see
-	  <file:Documentation/networking/ipddp.txt> for more information.
+	  <file:Documentation/networking/ipddp.rst> for more information.
diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
index 27551bf3d7e4..43eef60653b2 100644
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
@@ -9,7 +9,7 @@ menuconfig ARCNET
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in
-	  <file:Documentation/networking/arcnet.txt>.
+	  <file:Documentation/networking/arcnet.rst>.
 
 	  You need both this driver, and the driver for the particular ARCnet
 	  chipset of your card. If you don't know, then it's probably a
@@ -28,7 +28,7 @@ config ARCNET_1201
 	  arc0 device.  You need to say Y here to communicate with
 	  industry-standard RFC1201 implementations, like the arcether.com
 	  packet driver or most DOS/Windows ODI drivers.  Please read the
-	  ARCnet documentation in <file:Documentation/networking/arcnet.txt>
+	  ARCnet documentation in <file:Documentation/networking/arcnet.rst>
 	  for more information about using arc0.
 
 config ARCNET_1051
@@ -42,7 +42,7 @@ config ARCNET_1051
 	  industry-standard RFC1201 implementations, like the arcether.com
 	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
 	  automatically as the arc0 device. Please read the ARCnet
-	  documentation in <file:Documentation/networking/arcnet.txt> for more
+	  documentation in <file:Documentation/networking/arcnet.rst> for more
 	  information about using arc0e and arc0s.
 
 config ARCNET_RAW
diff --git a/drivers/net/caif/Kconfig b/drivers/net/caif/Kconfig
index 661c25eb1c46..1538ad194cf4 100644
--- a/drivers/net/caif/Kconfig
+++ b/drivers/net/caif/Kconfig
@@ -28,7 +28,7 @@ config CAIF_SPI_SLAVE
 	  The CAIF Link layer SPI Protocol driver for Slave SPI interface.
 	  This driver implements a platform driver to accommodate for a
 	  platform specific SPI device. A sample CAIF SPI Platform device is
-	  provided in <file:Documentation/networking/caif/spi_porting.txt>.
+	  provided in <file:Documentation/networking/caif/spi_porting.rst>.
 
 config CAIF_SPI_SYNC
 	bool "Next command and length in start of frame"
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 8e05b5c31a77..fe409819b56d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -30,7 +30,7 @@ config 6PACK
 
 	  Note that this driver is still experimental and might cause
 	  problems. For details about the features and the usage of the
-	  driver, read <file:Documentation/networking/6pack.txt>.
+	  driver, read <file:Documentation/networking/6pack.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called 6pack.
@@ -127,7 +127,7 @@ config BAYCOM_SER_FDX
 	  your serial interface chip. To configure the driver, use the sethdlc
 	  utility available in the standard ax25 utilities package. For
 	  information on the modems, see <http://www.baycom.de/> and
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_ser_fdx.  This is recommended.
@@ -145,7 +145,7 @@ config BAYCOM_SER_HDX
 	  the driver, use the sethdlc utility available in the standard ax25
 	  utilities package. For information on the modems, see
 	  <http://www.baycom.de/> and
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_ser_hdx.  This is recommended.
@@ -160,7 +160,7 @@ config BAYCOM_PAR
 	  par96 designs. To configure the driver, use the sethdlc utility
 	  available in the standard ax25 utilities package. For information on
 	  the modems, see <http://www.baycom.de/> and the file
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_par.  This is recommended.
@@ -175,7 +175,7 @@ config BAYCOM_EPP
 	  designs. To configure the driver, use the sethdlc utility available
 	  in the standard ax25 utilities package. For information on the
 	  modems, see <http://www.baycom.de/> and the file
-	  <file:Documentation/networking/baycom.txt>.
+	  <file:Documentation/networking/baycom.rst>.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called baycom_epp.  This is recommended.
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index dbc0e3f7a3e2..3e21726c36e8 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -336,7 +336,7 @@ config DLCI
 
 	  To use frame relay, you need supporting hardware (called FRAD) and
 	  certain programs from the net-tools package as explained in
-	  <file:Documentation/networking/framerelay.txt>.
+	  <file:Documentation/networking/framerelay.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called dlci.
@@ -361,7 +361,7 @@ config SDLA
 
 	  These are multi-protocol cards, but only Frame Relay is supported
 	  by the driver at this time. Please read
-	  <file:Documentation/networking/framerelay.txt>.
+	  <file:Documentation/networking/framerelay.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called sdla.