[media] staging/media: remove deprecated omap1 driver

Remove this deprecated old driver.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

6 files changed, 0 insertions, 1729 deletions

diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
index c8adade87a12..c6878cdb858a 100644
--- a/drivers/staging/media/Kconfig
+++ b/drivers/staging/media/Kconfig
@@ -27,8 +27,6 @@ source "drivers/staging/media/davinci_vpfe/Kconfig"
 
 source "drivers/staging/media/mn88472/Kconfig"
 
-source "drivers/staging/media/omap1/Kconfig"
-
 source "drivers/staging/media/omap4iss/Kconfig"
 
 source "drivers/staging/media/timb/Kconfig"
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
index 508e9ca49c6b..9c89b3ecd77f 100644
--- a/drivers/staging/media/Makefile
+++ b/drivers/staging/media/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_I2C_BCM2048)	+= bcm2048/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_VIDEO_DM365_VPFE)	+= davinci_vpfe/
-obj-$(CONFIG_VIDEO_OMAP1)	+= omap1/
 obj-$(CONFIG_VIDEO_OMAP4)	+= omap4iss/
 obj-$(CONFIG_DVB_MN88472)       += mn88472/
 obj-$(CONFIG_VIDEO_TIMBERDALE)  += timb/
diff --git a/drivers/staging/media/omap1/Kconfig b/drivers/staging/media/omap1/Kconfig
deleted file mode 100644
index 6cfab3a04ae1..000000000000
--- a/drivers/staging/media/omap1/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-config VIDEO_OMAP1
-	tristate "OMAP1 Camera Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA
-	depends on ARCH_OMAP1
-	depends on HAS_DMA
-	select VIDEOBUF_DMA_CONTIG
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the TI OMAP1 camera interface
-
-	  This driver is deprecated and will be removed soon unless someone
-	  will start the work to convert this driver to the vb2 framework
-	  and remove the soc-camera dependency.
diff --git a/drivers/staging/media/omap1/Makefile b/drivers/staging/media/omap1/Makefile
deleted file mode 100644
index 2885622600f2..000000000000
--- a/drivers/staging/media/omap1/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# Makefile for OMAP1 driver
-
-obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o
diff --git a/drivers/staging/media/omap1/TODO b/drivers/staging/media/omap1/TODO
deleted file mode 100644
index 1025f9f60ff0..000000000000
--- a/drivers/staging/media/omap1/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-This driver is deprecated and will be removed soon unless someone will start
-the work to convert this driver to the vb2 framework and remove the
-soc-camera dependency.
-
-Note that trivial patches will not be accepted anymore, only a full conversion.
-
-If you want to convert this driver, please contact the linux-media mailinglist
-(see http://linuxtv.org/lists.php).
diff --git a/drivers/staging/media/omap1/omap1_camera.c b/drivers/staging/media/omap1/omap1_camera.c
deleted file mode 100644
index 54b8dd2d2bba..000000000000
--- a/drivers/staging/media/omap1/omap1_camera.c
+++ /dev/null
@@ -1,1702 +0,0 @@
-/*
- * V4L2 SoC Camera driver for OMAP1 Camera Interface
- *
- * Copyright (C) 2010, Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
- *
- * Based on V4L2 Driver for i.MXL/i.MXL camera (CSI) host
- * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA SoC camera driver
- * Copyright (C) 2006, Sascha Hauer, Pengutronix
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * Hardware specific bits initialy based on former work by Matt Callow
- * drivers/media/platform/omap/omap1510cam.c
- * Copyright (C) 2006 Matt Callow
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <linux/platform_data/media/omap1_camera.h>
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-#include <media/videobuf-dma-contig.h>
-#include <media/videobuf-dma-sg.h>
-
-#include <linux/omap-dma.h>
-
-
-#define DRIVER_NAME		"omap1-camera"
-#define DRIVER_VERSION		"0.0.2"
-
-#define OMAP_DMA_CAMERA_IF_RX		20
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP1 Camera Interface registers
- * ---------------------------------------------------------------------------
- */
-
-#define REG_CTRLCLOCK		0x00
-#define REG_IT_STATUS		0x04
-#define REG_MODE		0x08
-#define REG_STATUS		0x0C
-#define REG_CAMDATA		0x10
-#define REG_GPIO		0x14
-#define REG_PEAK_COUNTER	0x18
-
-/* CTRLCLOCK bit shifts */
-#define LCLK_EN			BIT(7)
-#define DPLL_EN			BIT(6)
-#define MCLK_EN			BIT(5)
-#define CAMEXCLK_EN		BIT(4)
-#define POLCLK			BIT(3)
-#define FOSCMOD_SHIFT		0
-#define FOSCMOD_MASK		(0x7 << FOSCMOD_SHIFT)
-#define FOSCMOD_12MHz		0x0
-#define FOSCMOD_6MHz		0x2
-#define FOSCMOD_9_6MHz		0x4
-#define FOSCMOD_24MHz		0x5
-#define FOSCMOD_8MHz		0x6
-
-/* IT_STATUS bit shifts */
-#define DATA_TRANSFER		BIT(5)
-#define FIFO_FULL		BIT(4)
-#define H_DOWN			BIT(3)
-#define H_UP			BIT(2)
-#define V_DOWN			BIT(1)
-#define V_UP			BIT(0)
-
-/* MODE bit shifts */
-#define RAZ_FIFO		BIT(18)
-#define EN_FIFO_FULL		BIT(17)
-#define EN_NIRQ			BIT(16)
-#define THRESHOLD_SHIFT		9
-#define THRESHOLD_MASK		(0x7f << THRESHOLD_SHIFT)
-#define DMA			BIT(8)
-#define EN_H_DOWN		BIT(7)
-#define EN_H_UP			BIT(6)
-#define EN_V_DOWN		BIT(5)
-#define EN_V_UP			BIT(4)
-#define ORDERCAMD		BIT(3)
-
-#define IRQ_MASK		(EN_V_UP | EN_V_DOWN | EN_H_UP | EN_H_DOWN | \
-				 EN_NIRQ | EN_FIFO_FULL)
-
-/* STATUS bit shifts */
-#define HSTATUS			BIT(1)
-#define VSTATUS			BIT(0)
-
-/* GPIO bit shifts */
-#define CAM_RST			BIT(0)
-
-/* end of OMAP1 Camera Interface registers */
-
-
-#define SOCAM_BUS_FLAGS	(V4L2_MBUS_MASTER | \
-			V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
-			V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
-			V4L2_MBUS_DATA_ACTIVE_HIGH)
-
-
-#define FIFO_SIZE		((THRESHOLD_MASK >> THRESHOLD_SHIFT) + 1)
-#define FIFO_SHIFT		__fls(FIFO_SIZE)
-
-#define DMA_BURST_SHIFT		(1 + OMAP_DMA_DATA_BURST_4)
-#define DMA_BURST_SIZE		(1 << DMA_BURST_SHIFT)
-
-#define DMA_ELEMENT_SHIFT	OMAP_DMA_DATA_TYPE_S32
-#define DMA_ELEMENT_SIZE	(1 << DMA_ELEMENT_SHIFT)
-
-#define DMA_FRAME_SHIFT_CONTIG	(FIFO_SHIFT - 1)
-#define DMA_FRAME_SHIFT_SG	DMA_BURST_SHIFT
-
-#define DMA_FRAME_SHIFT(x)	((x) == OMAP1_CAM_DMA_CONTIG ? \
-						DMA_FRAME_SHIFT_CONTIG : \
-						DMA_FRAME_SHIFT_SG)
-#define DMA_FRAME_SIZE(x)	(1 << DMA_FRAME_SHIFT(x))
-#define DMA_SYNC		OMAP_DMA_SYNC_FRAME
-#define THRESHOLD_LEVEL		DMA_FRAME_SIZE
-
-
-#define MAX_VIDEO_MEM		4	/* arbitrary video memory limit in MB */
-
-
-/*
- * Structures
- */
-
-/* buffer for one video frame */
-struct omap1_cam_buf {
-	struct videobuf_buffer		vb;
-	u32	code;
-	int				inwork;
-	struct scatterlist		*sgbuf;
-	int				sgcount;
-	int				bytes_left;
-	enum videobuf_state		result;
-};
-
-struct omap1_cam_dev {
-	struct soc_camera_host		soc_host;
-	struct clk			*clk;
-
-	unsigned int			irq;
-	void __iomem			*base;
-
-	int				dma_ch;
-
-	struct omap1_cam_platform_data	*pdata;
-	struct resource			*res;
-	unsigned long			pflags;
-	unsigned long			camexclk;
-
-	struct list_head		capture;
-
-	/* lock used to protect videobuf */
-	spinlock_t			lock;
-
-	/* Pointers to DMA buffers */
-	struct omap1_cam_buf		*active;
-	struct omap1_cam_buf		*ready;
-
-	enum omap1_cam_vb_mode		vb_mode;
-	int				(*mmap_mapper)(struct videobuf_queue *q,
-						struct videobuf_buffer *buf,
-						struct vm_area_struct *vma);
-
-	u32				reg_cache[0];
-};
-
-
-static void cam_write(struct omap1_cam_dev *pcdev, u16 reg, u32 val)
-{
-	pcdev->reg_cache[reg / sizeof(u32)] = val;
-	__raw_writel(val, pcdev->base + reg);
-}
-
-static u32 cam_read(struct omap1_cam_dev *pcdev, u16 reg, bool from_cache)
-{
-	return !from_cache ? __raw_readl(pcdev->base + reg) :
-			pcdev->reg_cache[reg / sizeof(u32)];
-}
-
-#define CAM_READ(pcdev, reg) \
-		cam_read(pcdev, REG_##reg, false)
-#define CAM_WRITE(pcdev, reg, val) \
-		cam_write(pcdev, REG_##reg, val)
-#define CAM_READ_CACHE(pcdev, reg) \
-		cam_read(pcdev, REG_##reg, true)
-
-/*
- *  Videobuf operations
- */
-static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
-		unsigned int *size)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct omap1_cam_dev *pcdev = ici->priv;
-
-	*size = icd->sizeimage;
-
-	if (!*count || *count < OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode))
-		*count = OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode);
-
-	if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
-		*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
-
-	dev_dbg(icd->parent,
-			"%s: count=%d, size=%d\n", __func__, *count, *size);
-
-	return 0;
-}
-
-static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
-		enum omap1_cam_vb_mode vb_mode)
-{
-	struct videobuf_buffer *vb = &buf->vb;
-
-	BUG_ON(in_interrupt());
-
-	videobuf_waiton(vq, vb, 0, 0);
-
-	if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
-		videobuf_dma_contig_free(vq, vb);
-	} else {
-		struct soc_camera_device *icd = vq->priv_data;
-		struct device *dev = icd->parent;
-		struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
-
-		videobuf_dma_unmap(dev, dma);
-		videobuf_dma_free(dma);
-	}
-
-	vb->state = VIDEOBUF_NEEDS_INIT;
-}
-
-static int omap1_videobuf_prepare(struct videobuf_queue *vq,
-		struct videobuf_buffer *vb, enum v4l2_field field)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-	struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb);
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct omap1_cam_dev *pcdev = ici->priv;
-	int ret;
-
-	WARN_ON(!list_empty(&vb->queue));
-
-	BUG_ON(NULL == icd->current_fmt);
-
-	buf->inwork = 1;
-
-	if (buf->code != icd->current_fmt->code || vb->field != field ||
-			vb->width  != icd->user_width ||
-			vb->height != icd->user_height) {
-		buf->code  = icd->current_fmt->code;
-		vb->width  = icd->user_width;
-		vb->height = icd->user_height;
-		vb->field  = field;
-		vb->state  = VIDEOBUF_NEEDS_INIT;
-	}
-
-	vb->size = icd->sizeimage;
-
-	if (vb->baddr && vb->bsize < vb->size) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (vb->state == VIDEOBUF_NEEDS_INIT) {
-		ret = videobuf_iolock(vq, vb, NULL);
-		if (ret)
-			goto fail;
-
-		vb->state = VIDEOBUF_PREPARED;
-	}
-	buf->inwork = 0;
-
-	return 0;
-fail:
-	free_buffer(vq, buf, pcdev->vb_mode);
-out:
-	buf->inwork = 0;
-	return ret;
-}
-
-static void set_dma_dest_params(int dma_ch, struct omap1_cam_buf *buf,
-		enum omap1_cam_vb_mode vb_mode)
-{
-	dma_addr_t dma_addr;
-	unsigned int block_size;
-
-	if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
-		dma_addr = videobuf_to_dma_contig(&buf->vb);
-		block_size = buf->vb.size;
-	} else {
-		if (WARN_ON(!buf->sgbuf)) {
-			buf->result = VIDEOBUF_ERROR;
-			return;
-		}
-		dma_addr = sg_dma_address(buf->sgbuf);
-		if (WARN_ON(!dma_addr)) {
-			buf->sgbuf = NULL;
-			buf->result = VIDEOBUF_ERROR;
-			return;
-		}
-		block_size = sg_dma_len(buf->sgbuf);
-		if (WARN_ON(!block_size)) {
-			buf->sgbuf = NULL;
-			buf->result = VIDEOBUF_ERROR;
-			return;
-		}
-		if (unlikely(buf->bytes_left < block_size))
-			block_size = buf->bytes_left;
-		if (WARN_ON(dma_addr & (DMA_FRAME_SIZE(vb_mode) *
-				DMA_ELEMENT_SIZE - 1))) {
-			dma_addr = ALIGN(dma_addr, DMA_FRAME_SIZE(vb_mode) *
-					DMA_ELEMENT_SIZE);
-			block_size &= ~(DMA_FRAME_SIZE(vb_mode) *
-					DMA_ELEMENT_SIZE - 1);
-		}
-		buf->bytes_left -= block_size;
-		buf->sgcount++;
-	}
-
-	omap_set_dma_dest_params(dma_ch,
-		OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, dma_addr, 0, 0);
-	omap_set_dma_transfer_params(dma_ch,
-		OMAP_DMA_DATA_TYPE_S32, DMA_FRAME_SIZE(vb_mode),
-		block_size >> (DMA_FRAME_SHIFT(vb_mode) + DMA_ELEMENT_SHIFT),
-		DMA_SYNC, 0, 0);
-}
-
-static struct omap1_cam_buf *prepare_next_vb(struct omap1_cam_dev *pcdev)
-{
-	struct omap1_cam_buf *buf;
-
-	/*
-	 * If there is already a buffer pointed out by the pcdev->ready,
-	 * (re)use it, otherwise try to fetch and configure a new one.
-	 */
-	buf = pcdev->ready;
-	if (!buf) {
-		if (list_empty(&pcdev->capture))
-			return buf;
-		buf = list_entry(pcdev->capture.next,
-				struct omap1_cam_buf, vb.queue);
-		buf->vb.state = VIDEOBUF_ACTIVE;
-		pcdev->ready = buf;
-		list_del_init(&buf->vb.queue);
-	}
-
-	if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
-		/*
-		 * In CONTIG mode, we can safely enter next buffer parameters
-		 * into the DMA programming register set after the DMA
-		 * has already been activated on the previous buffer
-		 */
-		set_dma_dest_params(pcdev->dma_ch, buf, pcdev->vb_mode);
-	} else {
-		/*
-		 * In SG mode, the above is not safe since there are probably
-		 * a bunch of sgbufs from previous sglist still pending.
-		 * Instead, mark the sglist fresh for the upcoming
-		 * try_next_sgbuf().
-		 */
-		buf->sgbuf = NULL;
-	}
-
-	return buf;
-}
-
-static struct scatterlist *try_next_sgbuf(int dma_ch, struct omap1_cam_buf *buf)
-{
-	struct scatterlist *sgbuf;
-
-	if (likely(buf->sgbuf)) {
-		/* current sglist is active */
-		if (unlikely(!buf->bytes_left)) {
-			/* indicate sglist complete */
-			sgbuf = NULL;
-		} else {
-			/* process next sgbuf */
-			sgbuf = sg_next(buf->sgbuf);
-			if (WARN_ON(!sgbuf)) {
-				buf->result = VIDEOBUF_ERROR;
-			} else if (WARN_ON(!sg_dma_len(sgbuf))) {
-				sgbuf = NULL;
-				buf->result = VIDEOBUF_ERROR;
-			}
-		}
-		buf->sgbuf = sgbuf;
-	} else {
-		/* sglist is fresh, initialize it before using */
-		struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
-
-		sgbuf = dma->sglist;
-		if (!(WARN_ON(!sgbuf))) {
-			buf->sgbuf = sgbuf;
-			buf->sgcount = 0;
-			buf->bytes_left = buf->vb.size;
-			buf->result = VIDEOBUF_DONE;
-		}
-	}
-	if (sgbuf)
-		/*
-		 * Put our next sgbuf parameters (address, size)
-		 * into the DMA programming register set.
-		 */
-		set_dma_dest_params(dma_ch, buf, OMAP1_CAM_DMA_SG);
-
-	return sgbuf;
-}
-
-static void start_capture(struct omap1_cam_dev *pcdev)
-{
-	struct omap1_cam_buf *buf = pcdev->active;
-	u32 ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
-	u32 mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN;
-
-	if (WARN_ON(!buf))
-		return;
-
-	/*
-	 * Enable start of frame interrupt, which we will use for activating
-	 * our end of frame watchdog when capture actually starts.
-	 */
-	mode |= EN_V_UP;
-
-	if (unlikely(ctrlclock & LCLK_EN))
-		/* stop pixel clock before FIFO reset */
-		CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
-	/* reset FIFO */
-	CAM_WRITE(pcdev, MODE, mode | RAZ_FIFO);
-
-	omap_start_dma(pcdev->dma_ch);
-
-	if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
-		/*
-		 * In SG mode, it's a good moment for fetching next sgbuf
-		 * from the current sglist and, if available, already putting
-		 * its parameters into the DMA programming register set.
-		 */
-		try_next_sgbuf(pcdev->dma_ch, buf);
-	}
-
-	/* (re)enable pixel clock */
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | LCLK_EN);
-	/* release FIFO reset */
-	CAM_WRITE(pcdev, MODE, mode);
-}
-
-static void suspend_capture(struct omap1_cam_dev *pcdev)
-{
-	u32 ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
-
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
-	omap_stop_dma(pcdev->dma_ch);
-}
-
-static void disable_capture(struct omap1_cam_dev *pcdev)
-{
-	u32 mode = CAM_READ_CACHE(pcdev, MODE);
-
-	CAM_WRITE(pcdev, MODE, mode & ~(IRQ_MASK | DMA));
-}
-
-static void omap1_videobuf_queue(struct videobuf_queue *vq,
-						struct videobuf_buffer *vb)
-{
-	struct soc_camera_device *icd = vq->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct omap1_cam_dev *pcdev = ici->priv;
-	struct omap1_cam_buf *buf;
-	u32 mode;
-
-	list_add_tail(&vb->queue, &pcdev->capture);
-	vb->state = VIDEOBUF_QUEUED;
-
-	if (pcdev->active) {
-		/*
-		 * Capture in progress, so don't touch pcdev->ready even if
-		 * empty. Since the transfer of the DMA programming register set
-		 * content to the DMA working register set is done automatically
-		 * by the DMA hardware, this can pretty well happen while we
-		 * are keeping the lock here. Leave fetching it from the queue
-		 * to be done when a next DMA interrupt occures instead.
-		 */
-		return;
-	}
-
-	WARN_ON(pcdev->ready);
-
-	buf = prepare_next_vb(pcdev);
-	if (WARN_ON(!buf))
-		return;
-
-	pcdev->active = buf;
-	pcdev->ready = NULL;
-
-	dev_dbg(icd->parent,
-		"%s: capture not active, setup FIFO, start DMA\n", __func__);
-	mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK;
-	mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT;
-	CAM_WRITE(pcdev, MODE, mode | EN_FIFO_FULL | DMA);
-
-	if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
-		/*
-		 * In SG mode, the above prepare_next_vb() didn't actually
-		 * put anything into the DMA programming register set,
-		 * so we have to do it now, before activating DMA.
-		 */
-		try_next_sgbuf(pcdev->dma_ch, buf);
-	}
-
-	start_capture(pcdev);
-}
-
-static void omap1_videobuf_release(struct videobuf_queue *vq,
-				 struct videobuf_buffer *vb)
-{
-	struct omap1_cam_buf *buf =
-			container_of(vb, struct omap1_cam_buf, vb);
-	struct soc_camera_device *icd = vq->priv_data;
-	struct device *dev = icd->parent;
-	struct soc_camera_host *ici = to_soc_camera_host(dev);
-	struct omap1_cam_dev *pcdev = ici->priv;
-
-	switch (vb->state) {
-	case VIDEOBUF_DONE:
-		dev_dbg(dev, "%s (done)\n", __func__);
-		break;
-	case VIDEOBUF_ACTIVE:
-		dev_dbg(dev, "%s (active)\n", __func__);
-		break;
-	case VIDEOBUF_QUEUED:
-		dev_dbg(dev, "%s (queued)\n", __func__);
-		break;
-	case VIDEOBUF_PREPARED:
-		dev_dbg(dev, "%s (prepared)\n", __func__);
-		break;
-	default:
-		dev_dbg(dev, "%s (unknown %d)\n", __func__, vb->state);
-		break;
-	}
-
-	free_buffer(vq, buf, pcdev->vb_mode);
-}
-
-static void videobuf_done(struct omap1_cam_dev *pcdev,
-		enum videobuf_state result)
-{
-	struct omap1_cam_buf *buf = pcdev->active;
-	struct videobuf_buffer *vb;
-	struct device *dev = pcdev->soc_host.icd->parent;
-
-	if (WARN_ON(!buf)) {
-		suspend_capture(pcdev);
-		disable_capture(pcdev);
-		return;
-	}
-
-	if (result == VIDEOBUF_ERROR)
-		suspend_capture(pcdev);
-
-	vb = &buf->vb;
-	if (waitqueue_active(&vb->done)) {
-		if (!pcdev->ready && result != VIDEOBUF_ERROR) {
-			/*
-			 * No next buffer has been entered into the DMA
-			 * programming register set on time (could be done only
-			 * while the previous DMA interurpt was processed, not
-			 * later), so the last DMA block, be it a whole buffer
-			 * if in CONTIG or its last sgbuf if in SG mode, is
-			 * about to be reused by the just autoreinitialized DMA
-			 * engine, and overwritten with next frame data. Best we
-			 * can do is stopping the capture as soon as possible,
-			 * hopefully before the next frame start.
-			 */
-			suspend_capture(pcdev);
-		}
-		vb->state = result;
-		v4l2_get_timestamp(&vb->ts);
-		if (result != VIDEOBUF_ERROR)
-			vb->field_count++;
-		wake_up(&vb->done);
-
-		/* shift in next buffer */
-		buf = pcdev->ready;
-		pcdev->active = buf;
-		pcdev->ready = NULL;
-
-		if (!buf) {
-			/*
-			 * No next buffer was ready on time (see above), so
-			 * indicate error condition to force capture restart or
-			 * stop, depending on next buffer already queued or not.
-			 */
-			result = VIDEOBUF_ERROR;
-			prepare_next_vb(pcdev);
-
-			buf = pcdev->ready;
-			pcdev->active = buf;
-			pcdev->ready = NULL;
-		}
-	} else if (pcdev->ready) {
-		/*
-		 * In both CONTIG and SG mode, the DMA engine has possibly
-		 * been already autoreinitialized with the preprogrammed
-		 * pcdev->ready buffer.  We can either accept this fact
-		 * and just swap the buffers, or provoke an error condition
-		 * and restart capture.  The former seems less intrusive.
-		 */
-		dev_dbg(dev, "%s: nobody waiting on videobuf, swap with next\n",
-				__func__);
-		pcdev->active = pcdev->ready;
-
-		if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
-			/*
-			 * In SG mode, we have to make sure that the buffer we
-			 * are putting back into the pcdev->ready is marked
-			 * fresh.
-			 */
-			buf->sgbuf = NULL;
-		}
-		pcdev->ready = buf;
-
-		buf = pcdev->active;
-	} else {
-		/*
-		 * No next buffer has been entered into
-		 * the DMA programming register set on time.
-		 */
-		if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
-			/*
-			 * In CONTIG mode, the DMA engine has already been
-			 * reinitialized with the current buffer. Best we can do
-			 * is not touching it.
-			 */
-			dev_dbg(dev,
-				"%s: nobody waiting on videobuf, reuse it\n",
-				__func__);
-		} else {
-			/*
-			 * In SG mode, the DMA engine has just been
-			 * autoreinitialized with the last sgbuf from the
-			 * current list. Restart capture in order to transfer
-			 * next frame start into the first sgbuf, not the last
-			 * one.
-			 */
-			if (result != VIDEOBUF_ERROR) {
-				suspend_capture(pcdev);
-				result = VIDEOBUF_ERROR;
-			}
-		}
-	}
-
-	if (!buf) {
-		dev_dbg(dev, "%s: no more videobufs, stop capture\n", __func__);
-		disable_capture(pcdev);
-		return;
-	}
-
-	if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
-		/*
-		 * In CONTIG mode, the current buffer parameters had already
-		 * been entered into the DMA programming register set while the
-		 * buffer was fetched with prepare_next_vb(), they may have also
-		 * been transferred into the runtime set and already active if
-		 * the DMA still running.
-		 */
-	} else {
-		/* In SG mode, extra steps are required */
-		if (result == VIDEOBUF_ERROR)
-			/* make sure we (re)use sglist from start on error */
-			buf->sgbuf = NULL;
-
-		/*
-		 * In any case, enter the next sgbuf parameters into the DMA
-		 * programming register set.  They will be used either during
-		 * nearest DMA autoreinitialization or, in case of an error,
-		 * on DMA startup below.
-		 */
-		try_next_sgbuf(pcdev->dma_ch, buf);
-	}
-
-	if (result == VIDEOBUF_ERROR) {
-		dev_dbg(dev, "%s: videobuf error; reset FIFO, restart DMA\n",
-				__func__);
-		start_capture(pcdev);
-		/*
-		 * In SG mode, the above also resulted in the next sgbuf
-		 * parameters being entered into the DMA programming register
-		 * set, making them ready for next DMA autoreinitialization.
-		 */
-	}
-
-	/*
-	 * Finally, try fetching next buffer.
-	 * In CONTIG mode, it will also enter it into the DMA programming
-	 * register set, making it ready for next DMA autoreinitialization.
-	 */
-	prepare_next_vb(pcdev);
-}
-
-static void dma_isr(int channel, unsigned short status, void *data)
-{
-	struct omap1_cam_dev *pcdev = data;
-	struct omap1_cam_buf *buf = pcdev->active;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pcdev->lock, flags);
-
-	if (WARN_ON(!buf)) {
-		suspend_capture(pcdev);
-		disable_capture(pcdev);
-		goto out;
-	}
-
-	if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
-		/*
-		 * In CONTIG mode, assume we have just managed to collect the
-		 * whole frame, hopefully before our end of frame watchdog is
-		 * triggered. Then, all we have to do is disabling the watchdog
-		 * for this frame, and calling videobuf_done() with success
-		 * indicated.
-		 */
-		CAM_WRITE(pcdev, MODE,
-				CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN);
-		videobuf_done(pcdev, VIDEOBUF_DONE);
-	} else {
-		/*
-		 * In SG mode, we have to process every sgbuf from the current
-		 * sglist, one after another.
-		 */
-		if (buf->sgbuf) {
-			/*
-			 * Current sglist not completed yet, try fetching next
-			 * sgbuf, hopefully putting it into the DMA programming
-			 * register set, making it ready for next DMA
-			 * autoreinitialization.
-			 */
-			try_next_sgbuf(pcdev->dma_ch, buf);
-			if (buf->sgbuf)
-				goto out;
-
-			/*
-			 * No more sgbufs left in the current sglist. This
-			 * doesn't mean that the whole videobuffer is already
-			 * complete, but only that the last sgbuf from the
-			 * current sglist is about to be filled. It will be
-			 * ready on next DMA interrupt, signalled with the
-			 * buf->sgbuf set back to NULL.
-			 */
-			if (buf->result != VIDEOBUF_ERROR) {
-				/*
-				 * Video frame collected without errors so far,
-				 * we can prepare for collecting a next one
-				 * as soon as DMA gets autoreinitialized
-				 * after the current (last) sgbuf is completed.
-				 */
-				buf = prepare_next_vb(pcdev);
-				if (!buf)
-					goto out;
-
-				try_next_sgbuf(pcdev->dma_ch, buf);
-				goto out;
-			}
-		}
-		/* end of videobuf */
-		videobuf_done(pcdev, buf->result);
-	}
-
-out:
-	spin_unlock_irqrestore(&pcdev->lock, flags);
-}
-
-static irqreturn_t cam_isr(int irq, void *data)
-{
-	struct omap1_cam_dev *pcdev = data;
-	struct device *dev = pcdev->soc_host.icd->parent;
-	struct omap1_cam_buf *buf = pcdev->active;
-	u32 it_status;
-	unsigned long flags;
-
-	it_status = CAM_READ(pcdev, IT_STATUS);
-	if (!it_status)
-		return IRQ_NONE;
-
-	spin_lock_irqsave(&pcdev->lock, flags);
-
-	if (WARN_ON(!buf)) {
-		dev_warn(dev, "%s: unhandled camera interrupt, status == %#x\n",
-			 __func__, it_status);
-		suspend_capture(pcdev);
-		disable_capture(pcdev);
-		goto out;
-	}
-
-	if (unlikely(it_status & FIFO_FULL)) {
-		dev_warn(dev, "%s: FIFO overflow\n", __func__);
-
-	} else if (it_status & V_DOWN) {
-		/* end of video frame watchdog */
-		if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
-			/*
-			 * In CONTIG mode, the watchdog is disabled with
-			 * successful DMA end of block interrupt, and reenabled
-			 * on next frame start. If we get here, there is nothing
-			 * to check, we must be out of sync.
-			 */
-		} else {
-			if (buf->sgcount == 2) {
-				/*
-				 * If exactly 2 sgbufs from the next sglist have
-				 * been programmed into the DMA engine (the
-				 * first one already transferred into the DMA
-				 * runtime register set, the second one still
-				 * in the programming set), then we are in sync.
-				 */
-				goto out;
-			}
-		}
-		dev_notice(dev, "%s: unexpected end of video frame\n",
-				__func__);
-
-	} else if (it_status & V_UP) {
-		u32 mode;
-
-		if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
-			/*
-			 * In CONTIG mode, we need this interrupt every frame
-			 * in oredr to reenable our end of frame watchdog.
-			 */
-			mode = CAM_READ_CACHE(pcdev, MODE);
-		} else {
-			/*
-			 * In SG mode, the below enabled end of frame watchdog
-			 * is kept on permanently, so we can turn this one shot
-			 * setup off.
-			 */
-			mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_UP;
-		}
-
-		if (!(mode & EN_V_DOWN)) {
-			/* (re)enable end of frame watchdog interrupt */
-			mode |= EN_V_DOWN;
-		}
-		CAM_WRITE(pcdev, MODE, mode);
-		goto out;
-
-	} else {
-		dev_warn(dev, "%s: unhandled camera interrupt, status == %#x\n",
-				__func__, it_status);
-		goto out;
-	}
-
-	videobuf_done(pcdev, VIDEOBUF_ERROR);
-out:
-	spin_unlock_irqrestore(&pcdev->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static struct videobuf_queue_ops omap1_videobuf_ops = {
-	.buf_setup	= omap1_videobuf_setup,
-	.buf_prepare	= omap1_videobuf_prepare,
-	.buf_queue	= omap1_videobuf_queue,
-	.buf_release	= omap1_videobuf_release,
-};
-
-
-/*
- * SOC Camera host operations
- */
-
-static void sensor_reset(struct omap1_cam_dev *pcdev, bool reset)
-{
-	/* apply/release camera sensor reset if requested by platform data */
-	if (pcdev->pflags & OMAP1_CAMERA_RST_HIGH)
-		CAM_WRITE(pcdev, GPIO, reset);
-	else if (pcdev->pflags & OMAP1_CAMERA_RST_LOW)
-		CAM_WRITE(pcdev, GPIO, !reset);
-}
-
-static int omap1_cam_add_device(struct soc_camera_device *icd)
-{
-	dev_dbg(icd->parent, "OMAP1 Camera driver attached to camera %d\n",
-			icd->devnum);
-
-	return 0;
-}
-
-static void omap1_cam_remove_device(struct soc_camera_device *icd)
-{
-	dev_dbg(icd->parent,
-		"OMAP1 Camera driver detached from camera %d\n", icd->devnum);
-}
-
-/*
- * The following two functions absolutely depend on the fact, that
- * there can be only one camera on OMAP1 camera sensor interface
- */
-static int omap1_cam_clock_start(struct soc_camera_host *ici)
-{
-	struct omap1_cam_dev *pcdev = ici->priv;
-	u32 ctrlclock;
-
-	clk_enable(pcdev->clk);
-
-	/* setup sensor clock */
-	ctrlclock = CAM_READ(pcdev, CTRLCLOCK);
-	ctrlclock &= ~(CAMEXCLK_EN | MCLK_EN | DPLL_EN);
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
-	ctrlclock &= ~FOSCMOD_MASK;
-	switch (pcdev->camexclk) {
-	case 6000000:
-		ctrlclock |= CAMEXCLK_EN | FOSCMOD_6MHz;
-		break;
-	case 8000000:
-		ctrlclock |= CAMEXCLK_EN | FOSCMOD_8MHz | DPLL_EN;
-		break;
-	case 9600000:
-		ctrlclock |= CAMEXCLK_EN | FOSCMOD_9_6MHz | DPLL_EN;
-		break;
-	case 12000000:
-		ctrlclock |= CAMEXCLK_EN | FOSCMOD_12MHz;
-		break;
-	case 24000000:
-		ctrlclock |= CAMEXCLK_EN | FOSCMOD_24MHz | DPLL_EN;
-	default:
-		break;
-	}
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~DPLL_EN);
-
-	/* enable internal clock */
-	ctrlclock |= MCLK_EN;
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
-	sensor_reset(pcdev, false);
-
-	return 0;
-}
-
-static void omap1_cam_clock_stop(struct soc_camera_host *ici)
-{
-	struct omap1_cam_dev *pcdev = ici->priv;
-	u32 ctrlclock;
-
-	suspend_capture(pcdev);
-	disable_capture(pcdev);
-
-	sensor_reset(pcdev, true);
-
-	/* disable and release system clocks */
-	ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
-	ctrlclock &= ~(MCLK_EN | DPLL_EN | CAMEXCLK_EN);
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
-	ctrlclock = (ctrlclock & ~FOSCMOD_MASK) | FOSCMOD_12MHz;
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | MCLK_EN);
-
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~MCLK_EN);
-
-	clk_disable(pcdev->clk);
-}
-
-/* Duplicate standard formats based on host capability of byte swapping */
-static const struct soc_mbus_lookup omap1_cam_formats[] = {
-{
-	.code = MEDIA_BUS_FMT_UYVY8_2X8,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_YUYV,
-		.name			= "YUYV",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_VYUY8_2X8,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_YVYU,
-		.name			= "YVYU",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_YUYV8_2X8,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_UYVY,
-		.name			= "UYVY",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_YVYU8_2X8,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_VYUY,
-		.name			= "VYUY",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_RGB555,
-		.name			= "RGB555",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_RGB555X,
-		.name			= "RGB555X",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_RGB565_2X8_BE,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_RGB565,
-		.name			= "RGB565",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-}, {
-	.code = MEDIA_BUS_FMT_RGB565_2X8_LE,
-	.fmt = {
-		.fourcc			= V4L2_PIX_FMT_RGB565X,
-		.name			= "RGB565X",
-		.bits_per_sample	= 8,
-		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
-		.order			= SOC_MBUS_ORDER_BE,
-		.layout			= SOC_MBUS_LAYOUT_PACKED,
-	},
-},
-};
-
-static int omap1_cam_get_formats(struct soc_camera_device *icd,
-		unsigned int idx, struct soc_camera_format_xlate *xlate)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->parent;
-	int formats = 0, ret;
-	struct v4l2_subdev_mbus_code_enum code = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-		.index = idx,
-	};
-	const struct soc_mbus_pixelfmt *fmt;
-
-	ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
-	if (ret < 0)
-		/* No more formats */
-		return 0;
-
-	fmt = soc_mbus_get_fmtdesc(code.code);
-	if (!fmt) {
-		dev_warn(dev, "%s: unsupported format code #%d: %d\n", __func__,
-				idx, code.code);
-		return 0;
-	}
-
-	/* Check support for the requested bits-per-sample */
-	if (fmt->bits_per_sample != 8)
-		return 0;
-
-	switch (code.code) {
-	case MEDIA_BUS_FMT_YUYV8_2X8:
-	case MEDIA_BUS_FMT_YVYU8_2X8:
-	case MEDIA_BUS_FMT_UYVY8_2X8:
-	case MEDIA_BUS_FMT_VYUY8_2X8:
-	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE:
-	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
-	case MEDIA_BUS_FMT_RGB565_2X8_BE:
-	case MEDIA_BUS_FMT_RGB565_2X8_LE:
-		formats++;
-		if (xlate) {
-			xlate->host_fmt	= soc_mbus_find_fmtdesc(code.code,
-						omap1_cam_formats,
-						ARRAY_SIZE(omap1_cam_formats));
-			xlate->code	= code.code;
-			xlate++;
-			dev_dbg(dev,
-				"%s: providing format %s as byte swapped code #%d\n",
-				__func__, xlate->host_fmt->name, code.code);
-		}
-	default:
-		if (xlate)
-			dev_dbg(dev,
-				"%s: providing format %s in pass-through mode\n",
-				__func__, fmt->name);
-	}
-	formats++;
-	if (xlate) {
-		xlate->host_fmt	= fmt;
-		xlate->code	= code.code;
-		xlate++;
-	}
-
-	return formats;
-}
-
-static bool is_dma_aligned(s32 bytes_per_line, unsigned int height,
-		enum omap1_cam_vb_mode vb_mode)
-{
-	int size = bytes_per_line * height;
-
-	return IS_ALIGNED(bytes_per_line, DMA_ELEMENT_SIZE) &&
-		IS_ALIGNED(size, DMA_FRAME_SIZE(vb_mode) * DMA_ELEMENT_SIZE);
-}
-
-static int dma_align(int *width, int *height,
-		const struct soc_mbus_pixelfmt *fmt,
-		enum omap1_cam_vb_mode vb_mode, bool enlarge)
-{
-	s32 bytes_per_line = soc_mbus_bytes_per_line(*width, fmt);
-
-	if (bytes_per_line < 0)
-		return bytes_per_line;
-
-	if (!is_dma_aligned(bytes_per_line, *height, vb_mode)) {
-		unsigned int pxalign = __fls(bytes_per_line / *width);
-		unsigned int salign  = DMA_FRAME_SHIFT(vb_mode) +
-				DMA_ELEMENT_SHIFT - pxalign;
-		unsigned int incr    = enlarge << salign;
-
-		v4l_bound_align_image(width, 1, *width + incr, 0,
-				height, 1, *height + incr, 0, salign);
-		return 0;
-	}
-	return 1;
-}
-
-#define subdev_call_with_sense(pcdev, dev, icd, sd, op, function, args...)		     \
-({										     \
-	struct soc_camera_sense sense = {					     \
-		.master_clock		= pcdev->camexclk,			     \
-		.pixel_clock_max	= 0,					     \
-	};									     \
-	int __ret;								     \
-										     \
-	if (pcdev->pdata)							     \
-		sense.pixel_clock_max = pcdev->pdata->lclk_khz_max * 1000;	     \
-	icd->sense = &sense;							     \
-	__ret = v4l2_subdev_call(sd, op, function, ##args);			     \
-	icd->sense = NULL;							     \
-										     \
-	if (sense.flags & SOCAM_SENSE_PCLK_CHANGED) {				     \
-		if (sense.pixel_clock > sense.pixel_clock_max) {		     \
-			dev_err(dev,						     \
-				"%s: pixel clock %lu set by the camera too high!\n", \
-				__func__, sense.pixel_clock);			     \
-			__ret = -EINVAL;					     \
-		}								     \
-	}									     \
-	__ret;									     \
-})
-
-static int set_format(struct omap1_cam_dev *pcdev, struct device *dev,
-		struct soc_camera_device *icd, struct v4l2_subdev *sd,
-		struct v4l2_subdev_format *format,
-		const struct soc_camera_format_xlate *xlate)
-{
-	s32 bytes_per_line;
-	struct v4l2_mbus_framefmt *mf = &format->format;
-	int ret = subdev_call_with_sense(pcdev, dev, icd, sd, pad, set_fmt, NULL, format);
-
-	if (ret < 0) {
-		dev_err(dev, "%s: set_fmt failed\n", __func__);
-		return ret;
-	}
-
-	if (mf->code != xlate->code) {
-		dev_err(dev, "%s: unexpected pixel code change\n", __func__);
-		return -EINVAL;
-	}
-
-	bytes_per_line = soc_mbus_bytes_per_line(mf->width, xlate->host_fmt);
-	if (bytes_per_line < 0) {
-		dev_err(dev, "%s: soc_mbus_bytes_per_line() failed\n",
-				__func__);
-		return bytes_per_line;
-	}
-
-	if (!is_dma_aligned(bytes_per_line, mf->height, pcdev->vb_mode)) {
-		dev_err(dev, "%s: resulting geometry %ux%u not DMA aligned\n",
-				__func__, mf->width, mf->height);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int omap1_cam_set_crop(struct soc_camera_device *icd,
-			       const struct v4l2_crop *crop)
-{
-	const struct v4l2_rect *rect = &crop->c;
-	const struct soc_camera_format_xlate *xlate = icd->current_fmt;
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->parent;
-	struct soc_camera_host *ici = to_soc_camera_host(dev);
-	struct omap1_cam_dev *pcdev = ici->priv;
-	struct v4l2_subdev_format fmt = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct v4l2_mbus_framefmt *mf = &fmt.format;
-	int ret;
-
-	ret = subdev_call_with_sense(pcdev, dev, icd, sd, video, s_crop, crop);
-	if (ret < 0) {
-		dev_warn(dev, "%s: failed to crop to %ux%u@%u:%u\n", __func__,
-			 rect->width, rect->height, rect->left, rect->top);
-		return ret;
-	}
-
-	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
-	if (ret < 0) {
-		dev_warn(dev, "%s: failed to fetch current format\n", __func__);
-		return ret;
-	}
-
-	ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode,
-			false);
-	if (ret < 0) {
-		dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
-				__func__, mf->width, mf->height,
-				xlate->host_fmt->name);
-		return ret;
-	}
-
-	if (!ret) {
-		/* sensor returned geometry not DMA aligned, trying to fix */
-		ret = set_format(pcdev, dev, icd, sd, &fmt, xlate);
-		if (ret < 0) {
-			dev_err(dev, "%s: failed to set format\n", __func__);
-			return ret;
-		}
-	}
-
-	icd->user_width	 = mf->width;
-	icd->user_height = mf->height;
-
-	return 0;
-}
-
-static int omap1_cam_set_fmt(struct soc_camera_device *icd,
-			      struct v4l2_format *f)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	const struct soc_camera_format_xlate *xlate;
-	struct device *dev = icd->parent;
-	struct soc_camera_host *ici = to_soc_camera_host(dev);
-	struct omap1_cam_dev *pcdev = ici->priv;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_subdev_format format = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct v4l2_mbus_framefmt *mf = &format.format;
-	int ret;
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
-	if (!xlate) {
-		dev_warn(dev, "%s: format %#x not found\n", __func__,
-				pix->pixelformat);
-		return -EINVAL;
-	}
-
-	mf->width	= pix->width;
-	mf->height	= pix->height;
-	mf->field	= pix->field;
-	mf->colorspace	= pix->colorspace;
-	mf->code	= xlate->code;
-
-	ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode,
-			true);
-	if (ret < 0) {
-		dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
-				__func__, pix->width, pix->height,
-				xlate->host_fmt->name);
-		return ret;
-	}
-
-	ret = set_format(pcdev, dev, icd, sd, &format, xlate);
-	if (ret < 0) {
-		dev_err(dev, "%s: failed to set format\n", __func__);
-		return ret;
-	}
-
-	pix->width	 = mf->width;
-	pix->height	 = mf->height;
-	pix->field	 = mf->field;
-	pix->colorspace  = mf->colorspace;
-	icd->current_fmt = xlate;
-
-	return 0;
-}
-
-static int omap1_cam_try_fmt(struct soc_camera_device *icd,
-			      struct v4l2_format *f)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	const struct soc_camera_format_xlate *xlate;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	struct v4l2_subdev_pad_config pad_cfg;
-	struct v4l2_subdev_format format = {
-		.which = V4L2_SUBDEV_FORMAT_TRY,
-	};
-	struct v4l2_mbus_framefmt *mf = &format.format;
-	int ret;
-	/* TODO: limit to mx1 hardware capabilities */
-
-	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
-	if (!xlate) {
-		dev_warn(icd->parent, "Format %#x not found\n",
-			 pix->pixelformat);
-		return -EINVAL;
-	}
-
-	mf->width	= pix->width;
-	mf->height	= pix->height;
-	mf->field	= pix->field;
-	mf->colorspace	= pix->colorspace;
-	mf->code	= xlate->code;
-
-	/* limit to sensor capabilities */
-	ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format);
-	if (ret < 0)
-		return ret;
-
-	pix->width	= mf->width;
-	pix->height	= mf->height;
-	pix->field	= mf->field;
-	pix->colorspace	= mf->colorspace;
-
-	return 0;
-}
-
-static bool sg_mode;
-
-/*
- * Local mmap_mapper wrapper,
- * used for detecting videobuf-dma-contig buffer allocation failures
- * and switching to videobuf-dma-sg automatically for future attempts.
- */
-static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
-				  struct videobuf_buffer *buf,
-				  struct vm_area_struct *vma)
-{
-	struct soc_camera_device *icd = q->priv_data;
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct omap1_cam_dev *pcdev = ici->priv;
-	int ret;
-
-	ret = pcdev->mmap_mapper(q, buf, vma);
-
-	if (ret == -ENOMEM)
-		sg_mode = true;
-
-	return ret;
-}
-
-static void omap1_cam_init_videobuf(struct videobuf_queue *q,
-				     struct soc_camera_device *icd)
-{
-	struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
-	struct omap1_cam_dev *pcdev = ici->priv;
-
-	if (!sg_mode)
-		videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
-				icd->parent, &pcdev->lock,
-				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd, &ici->host_lock);
-	else
-		videobuf_queue_sg_init(q, &omap1_videobuf_ops,
-				icd->parent, &pcdev->lock,
-				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd, &ici->host_lock);
-
-	/* use videobuf mode (auto)selected with the module parameter */
-	pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
-
-	/*
-	 * Ensure we substitute the videobuf-dma-contig version of the
-	 * mmap_mapper() callback with our own wrapper, used for switching
-	 * automatically to videobuf-dma-sg on buffer allocation failure.
-	 */
-	if (!sg_mode && q->int_ops->mmap_mapper != omap1_cam_mmap_mapper) {
-		pcdev->mmap_mapper = q->int_ops->mmap_mapper;
-		q->int_ops->mmap_mapper = omap1_cam_mmap_mapper;
-	}
-}
-
-static int omap1_cam_reqbufs(struct soc_camera_device *icd,
-			      struct v4l2_requestbuffers *p)
-{
-	int i;
-
-	/*
-	 * This is for locking debugging only. I removed spinlocks and now I
-	 * check whether .prepare is ever called on a linked buffer, or whether
-	 * a dma IRQ can occur for an in-work or unlinked buffer. Until now
-	 * it hadn't triggered
-	 */
-	for (i = 0; i < p->count; i++) {
-		struct omap1_cam_buf *buf = container_of(icd->vb_vidq.bufs[i],
-						      struct omap1_cam_buf, vb);
-		buf->inwork = 0;
-		INIT_LIST_HEAD(&buf->vb.queue);
-	}
-
-	return 0;
-}
-
-static int omap1_cam_querycap(struct soc_camera_host *ici,
-			       struct v4l2_capability *cap)
-{
-	/* cap->name is set by the friendly caller:-> */
-	strlcpy(cap->card, "OMAP1 Camera", sizeof(cap->card));
-	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-
-	return 0;
-}
-
-static int omap1_cam_set_bus_param(struct soc_camera_device *icd)
-{
-	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-	struct device *dev = icd->parent;
-	struct soc_camera_host *ici = to_soc_camera_host(dev);
-	struct omap1_cam_dev *pcdev = ici->priv;
-	u32 pixfmt = icd->current_fmt->host_fmt->fourcc;
-	const struct soc_camera_format_xlate *xlate;
-	const struct soc_mbus_pixelfmt *fmt;
-	struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
-	unsigned long common_flags;
-	u32 ctrlclock, mode;
-	int ret;
-
-	ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
-	if (!ret) {
-		common_flags = soc_mbus_config_compatible(&cfg, SOCAM_BUS_FLAGS);
-		if (!common_flags) {
-			dev_warn(dev,
-				 "Flags incompatible: camera 0x%x, host 0x%x\n",
-				 cfg.flags, SOCAM_BUS_FLAGS);
-			return -EINVAL;
-		}
-	} else if (ret != -ENOIOCTLCMD) {
-		return ret;
-	} else {
-		common_flags = SOCAM_BUS_FLAGS;
-	}
-
-	/* Make choices, possibly based on platform configuration */
-	if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
-			(common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
-		if (!pcdev->pdata ||
-				pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
-			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
-		else
-			common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
-	}
-
-	cfg.flags = common_flags;
-	ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
-	if (ret < 0 && ret != -ENOIOCTLCMD) {
-		dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
-			common_flags, ret);
-		return ret;
-	}
-
-	ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
-	if (ctrlclock & LCLK_EN)
-		CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
-
-	if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) {
-		dev_dbg(dev, "CTRLCLOCK_REG |= POLCLK\n");
-		ctrlclock |= POLCLK;
-	} else {
-		dev_dbg(dev, "CTRLCLOCK_REG &= ~POLCLK\n");
-		ctrlclock &= ~POLCLK;
-	}
-	CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
-
-	if (ctrlclock & LCLK_EN)
-		CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock);
-
-	/* select bus endianness */
-	xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
-	fmt = xlate->host_fmt;
-
-	mode = CAM_READ(pcdev, MODE) & ~(RAZ_FIFO | IRQ_MASK | DMA);
-	if (fmt->order == SOC_MBUS_ORDER_LE) {
-		dev_dbg(dev, "MODE_REG &= ~ORDERCAMD\n");
-		CAM_WRITE(pcdev, MODE, mode & ~ORDERCAMD);
-	} else {
-		dev_dbg(dev, "MODE_REG |= ORDERCAMD\n");
-		CAM_WRITE(pcdev, MODE, mode | ORDERCAMD);
-	}
-
-	return 0;
-}
-
-static unsigned int omap1_cam_poll(struct file *file, poll_table *pt)
-{
-	struct soc_camera_device *icd = file->private_data;
-	struct omap1_cam_buf *buf;
-
-	buf = list_entry(icd->vb_vidq.stream.next, struct omap1_cam_buf,
-			 vb.stream);
-
-	poll_wait(file, &buf->vb.done, pt);
-
-	if (buf->vb.state == VIDEOBUF_DONE ||
-	    buf->vb.state == VIDEOBUF_ERROR)
-		return POLLIN | POLLRDNORM;
-
-	return 0;
-}
-
-static struct soc_camera_host_ops omap1_host_ops = {
-	.owner		= THIS_MODULE,
-	.add		= omap1_cam_add_device,
-	.remove		= omap1_cam_remove_device,
-	.clock_start	= omap1_cam_clock_start,
-	.clock_stop	= omap1_cam_clock_stop,
-	.get_formats	= omap1_cam_get_formats,
-	.set_crop	= omap1_cam_set_crop,
-	.set_fmt	= omap1_cam_set_fmt,
-	.try_fmt	= omap1_cam_try_fmt,
-	.init_videobuf	= omap1_cam_init_videobuf,
-	.reqbufs	= omap1_cam_reqbufs,
-	.querycap	= omap1_cam_querycap,
-	.set_bus_param	= omap1_cam_set_bus_param,
-	.poll		= omap1_cam_poll,
-};
-
-static int omap1_cam_probe(struct platform_device *pdev)
-{
-	struct omap1_cam_dev *pcdev;
-	struct resource *res;
-	struct clk *clk;
-	void __iomem *base;
-	unsigned int irq;
-	int err = 0;
-
-	irq = platform_get_irq(pdev, 0);
-	if ((int)irq <= 0) {
-		err = -ENODEV;
-		goto exit;
-	}
-
-	clk = devm_clk_get(&pdev->dev, "armper_ck");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	pcdev = devm_kzalloc(&pdev->dev, sizeof(*pcdev) + resource_size(res),
-			     GFP_KERNEL);
-	if (!pcdev)
-		return -ENOMEM;
-
-	pcdev->clk = clk;
-
-	pcdev->pdata = pdev->dev.platform_data;
-	if (pcdev->pdata) {
-		pcdev->pflags = pcdev->pdata->flags;
-		pcdev->camexclk = pcdev->pdata->camexclk_khz * 1000;
-	}
-
-	switch (pcdev->camexclk) {
-	case 6000000:
-	case 8000000:
-	case 9600000:
-	case 12000000:
-	case 24000000:
-		break;
-	default:
-		/* pcdev->camexclk != 0 => pcdev->pdata != NULL */
-		dev_warn(&pdev->dev,
-				"Incorrect sensor clock frequency %ld kHz, "
-				"should be one of 0, 6, 8, 9.6, 12 or 24 MHz, "
-				"please correct your platform data\n",
-				pcdev->pdata->camexclk_khz);
-		pcdev->camexclk = 0;
-	case 0:
-		dev_info(&pdev->dev, "Not providing sensor clock\n");
-	}
-
-	INIT_LIST_HEAD(&pcdev->capture);
-	spin_lock_init(&pcdev->lock);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	pcdev->irq = irq;
-	pcdev->base = base;
-
-	sensor_reset(pcdev, true);
-
-	err = omap_request_dma(OMAP_DMA_CAMERA_IF_RX, DRIVER_NAME,
-			dma_isr, (void *)pcdev, &pcdev->dma_ch);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Can't request DMA for OMAP1 Camera\n");
-		return -EBUSY;
-	}
-	dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_ch);
-
-	/* preconfigure DMA */
-	omap_set_dma_src_params(pcdev->dma_ch, OMAP_DMA_PORT_TIPB,
-			OMAP_DMA_AMODE_CONSTANT, res->start + REG_CAMDATA,
-			0, 0);
-	omap_set_dma_dest_burst_mode(pcdev->dma_ch, OMAP_DMA_DATA_BURST_4);
-	/* setup DMA autoinitialization */
-	omap_dma_link_lch(pcdev->dma_ch, pcdev->dma_ch);
-
-	err = devm_request_irq(&pdev->dev, pcdev->irq, cam_isr, 0, DRIVER_NAME,
-			       pcdev);
-	if (err) {
-		dev_err(&pdev->dev, "Camera interrupt register failed\n");
-		goto exit_free_dma;
-	}
-
-	pcdev->soc_host.drv_name	= DRIVER_NAME;
-	pcdev->soc_host.ops		= &omap1_host_ops;
-	pcdev->soc_host.priv		= pcdev;
-	pcdev->soc_host.v4l2_dev.dev	= &pdev->dev;
-	pcdev->soc_host.nr		= pdev->id;
-
-	err = soc_camera_host_register(&pcdev->soc_host);
-	if (err)
-		return err;
-
-	dev_info(&pdev->dev, "OMAP1 Camera Interface driver loaded\n");
-
-	return 0;
-
-exit_free_dma:
-	omap_free_dma(pcdev->dma_ch);
-exit:
-	return err;
-}
-
-static int omap1_cam_remove(struct platform_device *pdev)
-{
-	struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
-	struct omap1_cam_dev *pcdev = container_of(soc_host,
-					struct omap1_cam_dev, soc_host);
-
-	omap_free_dma(pcdev->dma_ch);
-
-	soc_camera_host_unregister(soc_host);
-
-	dev_info(&pdev->dev, "OMAP1 Camera Interface driver unloaded\n");
-
-	return 0;
-}
-
-static struct platform_driver omap1_cam_driver = {
-	.driver		= {
-		.name	= DRIVER_NAME,
-	},
-	.probe		= omap1_cam_probe,
-	.remove		= omap1_cam_remove,
-};
-
-module_platform_driver(omap1_cam_driver);
-
-module_param(sg_mode, bool, 0644);
-MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg");
-
-MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
-MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_ALIAS("platform:" DRIVER_NAME);