Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
This series contains updates to ixgbe, igb and pci.

The ixgbe changes contains a fix to a possible divide by zero by bailing
out of the ixgbe_update_itr() function if the last interrupt timeslice is
zero.  In addition, support is added for the new OCP x520 adapter as well
as LX support for 82599 devices.  Jacob provides a patch to change
variable wol_supported to wol_enabled to better reflect what the code
is actually doing (i.e. checking if WoL is enabled).

Alex adds SRIOV helper function to pci that will determine if a PF
has any VFs that are currently assigned to a guest.

The remaining 8 patches are against igb and contain the following changes:
* implement SERDES loopback configuration for i210 devices by unsetting
  sigdetect bit, so as to fix Ethtool loopback test failure
* add support for the SMBI semaphore for I210/I211 devices
* implement the new generic pci_vfs_assigned helper function (Alex's PCI
  helper function)
* display warning when link speed is downgraded due to Smartspeed
* ensure that VLAN hardware filtering remains enabled when the device is
  in promiscuous mode and VT mode simultaneously
* cleanup dead code in igb
* bump the driver version

v2: updated the PCI patch to add SRIOV helper function to remove extern
    from the declaration of pci_vfs_assigned in pci.h and return 0 if
    SR-IOV is disabled which is inline with other PCI SR-IOV functions
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

11 files changed, 207 insertions, 94 deletions

diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index c9bba39d50bd..ff6a17cb1362 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -389,6 +389,9 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
 		dev_spec->eee_disable = false;
 	else
 		dev_spec->eee_disable = true;
+	/* Allow a single clear of the SW semaphore on I210 and newer */
+	if (mac->type >= e1000_i210)
+		dev_spec->clear_semaphore_once = true;
 	/* physical interface link setup */
 	mac->ops.setup_physical_interface =
 		(hw->phy.media_type == e1000_media_type_copper)
@@ -440,8 +443,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 		mac->type = e1000_i350;
 		break;
 	case E1000_DEV_ID_I210_COPPER:
-	case E1000_DEV_ID_I210_COPPER_OEM1:
-	case E1000_DEV_ID_I210_COPPER_IT:
 	case E1000_DEV_ID_I210_FIBER:
 	case E1000_DEV_ID_I210_SERDES:
 	case E1000_DEV_ID_I210_SGMII:
@@ -2049,10 +2050,6 @@ static s32 igb_reset_hw_82580(struct e1000_hw *hw)
 		hw_dbg("Auto Read Done did not complete\n");
 	}
 
-	/* If EEPROM is not present, run manual init scripts */
-	if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
-		igb_reset_init_script_82575(hw);
-
 	/* clear global device reset status bit */
 	wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
 
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 1138ccaf95ff..488abb24a54f 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -64,8 +64,6 @@ struct e1000_hw;
 #define E1000_DEV_ID_I350_SERDES		0x1523
 #define E1000_DEV_ID_I350_SGMII			0x1524
 #define E1000_DEV_ID_I210_COPPER		0x1533
-#define E1000_DEV_ID_I210_COPPER_OEM1		0x1534
-#define E1000_DEV_ID_I210_COPPER_IT		0x1535
 #define E1000_DEV_ID_I210_FIBER			0x1536
 #define E1000_DEV_ID_I210_SERDES		0x1537
 #define E1000_DEV_ID_I210_SGMII			0x1538
@@ -529,6 +527,7 @@ struct e1000_dev_spec_82575 {
 	bool sgmii_active;
 	bool global_device_reset;
 	bool eee_disable;
+	bool clear_semaphore_once;
 };
 
 struct e1000_hw {
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 9764cd3610e5..ddb3cf51b9b9 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -44,10 +44,42 @@
 static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
 {
 	u32 swsm;
-	s32 ret_val = E1000_SUCCESS;
 	s32 timeout = hw->nvm.word_size + 1;
 	s32 i = 0;
 
+	/* Get the SW semaphore */
+	while (i < timeout) {
+		swsm = rd32(E1000_SWSM);
+		if (!(swsm & E1000_SWSM_SMBI))
+			break;
+
+		udelay(50);
+		i++;
+	}
+
+	if (i == timeout) {
+		/* In rare circumstances, the SW semaphore may already be held
+		 * unintentionally. Clear the semaphore once before giving up.
+		 */
+		if (hw->dev_spec._82575.clear_semaphore_once) {
+			hw->dev_spec._82575.clear_semaphore_once = false;
+			igb_put_hw_semaphore(hw);
+			for (i = 0; i < timeout; i++) {
+				swsm = rd32(E1000_SWSM);
+				if (!(swsm & E1000_SWSM_SMBI))
+					break;
+
+				udelay(50);
+			}
+		}
+
+		/* If we do not have the semaphore here, we have to give up. */
+		if (i == timeout) {
+			hw_dbg("Driver can't access device - SMBI bit is set.\n");
+			return -E1000_ERR_NVM;
+		}
+	}
+
 	/* Get the FW semaphore. */
 	for (i = 0; i < timeout; i++) {
 		swsm = rd32(E1000_SWSM);
@@ -64,12 +96,10 @@ static s32 igb_get_hw_semaphore_i210(struct e1000_hw *hw)
 		/* Release semaphores */
 		igb_put_hw_semaphore(hw);
 		hw_dbg("Driver can't access the NVM\n");
-		ret_val = -E1000_ERR_NVM;
-		goto out;
+		return -E1000_ERR_NVM;
 	}
 
-out:
-	return ret_val;
+	return E1000_SUCCESS;
 }
 
 /**
@@ -99,23 +129,6 @@ void igb_release_nvm_i210(struct e1000_hw *hw)
 }
 
 /**
- *  igb_put_hw_semaphore_i210 - Release hardware semaphore
- *  @hw: pointer to the HW structure
- *
- *  Release hardware semaphore used to access the PHY or NVM
- **/
-static void igb_put_hw_semaphore_i210(struct e1000_hw *hw)
-{
-	u32 swsm;
-
-	swsm = rd32(E1000_SWSM);
-
-	swsm &= ~E1000_SWSM_SWESMBI;
-
-	wr32(E1000_SWSM, swsm);
-}
-
-/**
  *  igb_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
  *  @hw: pointer to the HW structure
  *  @mask: specifies which semaphore to acquire
@@ -138,11 +151,11 @@ s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
 		}
 
 		swfw_sync = rd32(E1000_SW_FW_SYNC);
-		if (!(swfw_sync & fwmask))
+		if (!(swfw_sync & (fwmask | swmask)))
 			break;
 
 		/* Firmware currently using resource (fwmask) */
-		igb_put_hw_semaphore_i210(hw);
+		igb_put_hw_semaphore(hw);
 		mdelay(5);
 		i++;
 	}
@@ -156,7 +169,7 @@ s32 igb_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
 	swfw_sync |= swmask;
 	wr32(E1000_SW_FW_SYNC, swfw_sync);
 
-	igb_put_hw_semaphore_i210(hw);
+	igb_put_hw_semaphore(hw);
 out:
 	return ret_val;
 }
@@ -180,7 +193,7 @@ void igb_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
 	swfw_sync &= ~mask;
 	wr32(E1000_SW_FW_SYNC, swfw_sync);
 
-	igb_put_hw_semaphore_i210(hw);
+	igb_put_hw_semaphore(hw);
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 48b594701efa..7876240fa74e 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -1678,17 +1678,12 @@ static int igb_setup_loopback_test(struct igb_adapter *adapter)
 		wr32(E1000_CONNSW, reg);
 
 		/* Unset sigdetect for SERDES loopback on
-		 * 82580 and i350 devices.
+		 * 82580 and newer devices.
 		 */
-		switch (hw->mac.type) {
-		case e1000_82580:
-		case e1000_i350:
+		if (hw->mac.type >= e1000_82580) {
 			reg = rd32(E1000_PCS_CFG0);
 			reg |= E1000_PCS_CFG_IGN_SD;
 			wr32(E1000_PCS_CFG0, reg);
-			break;
-		default:
-			break;
 		}
 
 		/* Set PCS register for forced speed */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index dcaa35481dd7..64cbe0dfe043 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -60,9 +60,9 @@
 #include <linux/i2c.h>
 #include "igb.h"
 
-#define MAJ 4
-#define MIN 1
-#define BUILD 2
+#define MAJ 5
+#define MIN 0
+#define BUILD 3
 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
 __stringify(BUILD) "-k"
 char igb_driver_name[] = "igb";
@@ -180,7 +180,6 @@ static void igb_check_vf_rate_limit(struct igb_adapter *);
 
 #ifdef CONFIG_PCI_IOV
 static int igb_vf_configure(struct igb_adapter *adapter, int vf);
-static bool igb_vfs_are_assigned(struct igb_adapter *adapter);
 #endif
 
 #ifdef CONFIG_PM
@@ -2402,7 +2401,7 @@ static int  igb_disable_sriov(struct pci_dev *pdev)
 	/* reclaim resources allocated to VFs */
 	if (adapter->vf_data) {
 		/* disable iov and allow time for transactions to clear */
-		if (igb_vfs_are_assigned(adapter)) {
+		if (pci_vfs_assigned(pdev)) {
 			dev_warn(&pdev->dev,
 				 "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
 			return -EPERM;
@@ -3737,6 +3736,10 @@ static void igb_set_rx_mode(struct net_device *netdev)
 	rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
 
 	if (netdev->flags & IFF_PROMISC) {
+		u32 mrqc = rd32(E1000_MRQC);
+		/* retain VLAN HW filtering if in VT mode */
+		if (mrqc & E1000_MRQC_ENABLE_VMDQ)
+			rctl |= E1000_RCTL_VFE;
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
 		vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
 	} else {
@@ -3902,6 +3905,7 @@ static void igb_watchdog_task(struct work_struct *work)
 						   struct igb_adapter,
 						   watchdog_task);
 	struct e1000_hw *hw = &adapter->hw;
+	struct e1000_phy_info *phy = &hw->phy;
 	struct net_device *netdev = adapter->netdev;
 	u32 link;
 	int i;
@@ -3930,6 +3934,11 @@ static void igb_watchdog_task(struct work_struct *work)
 			       (ctrl & E1000_CTRL_RFCE) ?  "RX" :
 			       (ctrl & E1000_CTRL_TFCE) ?  "TX" : "None");
 
+			/* check if SmartSpeed worked */
+			igb_check_downshift(hw);
+			if (phy->speed_downgraded)
+				netdev_warn(netdev, "Link Speed was downgraded by SmartSpeed\n");
+
 			/* check for thermal sensor event */
 			if (igb_thermal_sensor_event(hw,
 			    E1000_THSTAT_LINK_THROTTLE)) {
@@ -5242,39 +5251,6 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf)
 	return 0;
 }
 
-static bool igb_vfs_are_assigned(struct igb_adapter *adapter)
-{
-	struct pci_dev *pdev = adapter->pdev;
-	struct pci_dev *vfdev;
-	int dev_id;
-
-	switch (adapter->hw.mac.type) {
-	case e1000_82576:
-		dev_id = IGB_82576_VF_DEV_ID;
-		break;
-	case e1000_i350:
-		dev_id = IGB_I350_VF_DEV_ID;
-		break;
-	default:
-		return false;
-	}
-
-	/* loop through all the VFs to see if we own any that are assigned */
-	vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, NULL);
-	while (vfdev) {
-		/* if we don't own it we don't care */
-		if (vfdev->is_virtfn && vfdev->physfn == pdev) {
-			/* if it is assigned we cannot release it */
-			if (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED)
-				return true;
-		}
-
-		vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, dev_id, vfdev);
-	}
-
-	return false;
-}
-
 #endif
 static void igb_ping_all_vfs(struct igb_adapter *adapter)
 {
@@ -5548,12 +5524,75 @@ out:
 	return err;
 }
 
+static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i;
+	u32 reg;
+
+	/* Find the vlan filter for this id */
+	for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+		reg = rd32(E1000_VLVF(i));
+		if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+		    vid == (reg & E1000_VLVF_VLANID_MASK))
+			break;
+	}
+
+	if (i >= E1000_VLVF_ARRAY_SIZE)
+		i = -1;
+
+	return i;
+}
+
 static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
 	int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
+	int err = 0;
+
+	/* If in promiscuous mode we need to make sure the PF also has
+	 * the VLAN filter set.
+	 */
+	if (add && (adapter->netdev->flags & IFF_PROMISC))
+		err = igb_vlvf_set(adapter, vid, add,
+				   adapter->vfs_allocated_count);
+	if (err)
+		goto out;
 
-	return igb_vlvf_set(adapter, vid, add, vf);
+	err = igb_vlvf_set(adapter, vid, add, vf);
+
+	if (err)
+		goto out;
+
+	/* Go through all the checks to see if the VLAN filter should
+	 * be wiped completely.
+	 */
+	if (!add && (adapter->netdev->flags & IFF_PROMISC)) {
+		u32 vlvf, bits;
+
+		int regndx = igb_find_vlvf_entry(adapter, vid);
+		if (regndx < 0)
+			goto out;
+		/* See if any other pools are set for this VLAN filter
+		 * entry other than the PF.
+		 */
+		vlvf = bits = rd32(E1000_VLVF(regndx));
+		bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT +
+			      adapter->vfs_allocated_count);
+		/* If the filter was removed then ensure PF pool bit
+		 * is cleared if the PF only added itself to the pool
+		 * because the PF is in promiscuous mode.
+		 */
+		if ((vlvf & VLAN_VID_MASK) == vid &&
+		    !test_bit(vid, adapter->active_vlans) &&
+		    !bits)
+			igb_vlvf_set(adapter, vid, add,
+				     adapter->vfs_allocated_count);
+	}
+
+out:
+	return err;
 }
 
 static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 7946da94b228..3f792428ca53 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -266,6 +266,8 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	/* Determine 1G link capabilities off of SFP+ type */
 	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
@@ -1055,7 +1057,7 @@ mac_reset_top:
 		 * LMS state either.
 		 */
 		if ((hw->phy.multispeed_fiber && hw->mng_fw_enabled) ||
-		    hw->wol_supported)
+		    hw->wol_enabled)
 			hw->mac.orig_autoc =
 				(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
 				curr_lms;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index c3f1afd86906..bbe00bcc7582 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -231,6 +231,10 @@ static int ixgbe_get_settings(struct net_device *netdev,
 		case ixgbe_sfp_type_lr:
 		case ixgbe_sfp_type_srlr_core0:
 		case ixgbe_sfp_type_srlr_core1:
+		case ixgbe_sfp_type_1g_sx_core0:
+		case ixgbe_sfp_type_1g_sx_core1:
+		case ixgbe_sfp_type_1g_lx_core0:
+		case ixgbe_sfp_type_1g_lx_core1:
 			ecmd->supported |= SUPPORTED_FIBRE;
 			ecmd->advertising |= ADVERTISED_FIBRE;
 			ecmd->port = PORT_FIBRE;
@@ -246,12 +250,6 @@ static int ixgbe_get_settings(struct net_device *netdev,
 			ecmd->advertising |= ADVERTISED_TP;
 			ecmd->port = PORT_TP;
 			break;
-		case ixgbe_sfp_type_1g_sx_core0:
-		case ixgbe_sfp_type_1g_sx_core1:
-			ecmd->supported |= SUPPORTED_FIBRE;
-			ecmd->advertising |= ADVERTISED_FIBRE;
-			ecmd->port = PORT_FIBRE;
-			break;
 		case ixgbe_sfp_type_unknown:
 		default:
 			ecmd->supported |= SUPPORTED_FIBRE;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 6225f880a3f4..88f67375e85e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2095,6 +2095,9 @@ static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector,
 	 */
 	/* what was last interrupt timeslice? */
 	timepassed_us = q_vector->itr >> 2;
+	if (timepassed_us == 0)
+		return;
+
 	bytes_perint = bytes / timepassed_us; /* bytes/usec */
 
 	switch (itr_setting) {
@@ -7205,6 +7208,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
 			/* only support first port */
 			if (hw->bus.func != 0)
 				break;
+		case IXGBE_SUBDEV_ID_82599_SP_560FLR:
 		case IXGBE_SUBDEV_ID_82599_SFP:
 		case IXGBE_SUBDEV_ID_82599_RNDC:
 		case IXGBE_SUBDEV_ID_82599_ECNA_DP:
@@ -7213,6 +7217,14 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
 			break;
 		}
 		break;
+	case IXGBE_DEV_ID_82599EN_SFP:
+		/* Only this subdevice supports WOL */
+		switch (subdevice_id) {
+		case IXGBE_SUBDEV_ID_82599EN_SFP_OCP1:
+			is_wol_supported = 1;
+			break;
+		}
+		break;
 	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 		/* All except this subdevice support WOL */
 		if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
@@ -7529,9 +7541,9 @@ skip_sriov:
 	/* WOL not supported for all devices */
 	adapter->wol = 0;
 	hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
-	hw->wol_supported = ixgbe_wol_supported(adapter, pdev->device,
+	hw->wol_enabled = ixgbe_wol_supported(adapter, pdev->device,
 						pdev->subsystem_device);
-	if (hw->wol_supported)
+	if (hw->wol_enabled)
 		adapter->wol = IXGBE_WUFC_MAG;
 
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 060d2ad2ac96..e5691ccbce9d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -956,6 +956,13 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				else
 					hw->phy.sfp_type =
 						ixgbe_sfp_type_1g_sx_core1;
+			} else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
+				if (hw->bus.lan_id == 0)
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_lx_core0;
+				else
+					hw->phy.sfp_type =
+						ixgbe_sfp_type_1g_lx_core1;
 			} else {
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 			}
@@ -1043,6 +1050,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		if (comp_codes_10g == 0 &&
 		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
 			hw->phy.type = ixgbe_phy_sfp_unsupported;
@@ -1058,10 +1067,12 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 
 		hw->mac.ops.get_device_caps(hw, &enforce_sfp);
 		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
-		    !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
-		      (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) ||
-		      (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) ||
-		      (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) {
+		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
 			/* Make sure we're a supported PHY type */
 			if (hw->phy.type == ixgbe_phy_sfp_intel) {
 				status = 0;
@@ -1125,10 +1136,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 	 * SR modules
 	 */
 	if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+	    sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
 	    sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
 	    sfp_type == ixgbe_sfp_type_1g_sx_core0)
 		sfp_type = ixgbe_sfp_type_srlr_core0;
 	else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+		 sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
 		 sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
 		 sfp_type == ixgbe_sfp_type_1g_sx_core1)
 		sfp_type = ixgbe_sfp_type_srlr_core1;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 402f1a2ada3e..6d7066531139 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -56,11 +56,13 @@
 #define IXGBE_SUBDEV_ID_82599_SFP        0x11A9
 #define IXGBE_SUBDEV_ID_82599_RNDC       0x1F72
 #define IXGBE_SUBDEV_ID_82599_560FLR     0x17D0
+#define IXGBE_SUBDEV_ID_82599_SP_560FLR  0x211B
 #define IXGBE_SUBDEV_ID_82599_ECNA_DP    0x0470
 #define IXGBE_SUBDEV_ID_82599_LOM_SFP    0x8976
 #define IXGBE_DEV_ID_82599_SFP_EM        0x1507
 #define IXGBE_DEV_ID_82599_SFP_SF2       0x154D
 #define IXGBE_DEV_ID_82599EN_SFP         0x1557
+#define IXGBE_SUBDEV_ID_82599EN_SFP_OCP1 0x0001
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 #define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 #define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ  0x000C
@@ -2610,6 +2612,8 @@ enum ixgbe_sfp_type {
 	ixgbe_sfp_type_1g_cu_core1 = 10,
 	ixgbe_sfp_type_1g_sx_core0 = 11,
 	ixgbe_sfp_type_1g_sx_core1 = 12,
+	ixgbe_sfp_type_1g_lx_core0 = 13,
+	ixgbe_sfp_type_1g_lx_core1 = 14,
 	ixgbe_sfp_type_not_present = 0xFFFE,
 	ixgbe_sfp_type_unknown = 0xFFFF
 };
@@ -2999,7 +3003,7 @@ struct ixgbe_hw {
 	bool				force_full_reset;
 	bool				allow_unsupported_sfp;
 	bool				mng_fw_enabled;
-	bool				wol_supported;
+	bool				wol_enabled;
 };
 
 struct ixgbe_info {
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index ee599f274f05..c93071d428f5 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -729,6 +729,47 @@ int pci_num_vf(struct pci_dev *dev)
 EXPORT_SYMBOL_GPL(pci_num_vf);
 
 /**
+ * pci_vfs_assigned - returns number of VFs are assigned to a guest
+ * @dev: the PCI device
+ *
+ * Returns number of VFs belonging to this device that are assigned to a guest.
+ * If device is not a physical function returns -ENODEV.
+ */
+int pci_vfs_assigned(struct pci_dev *dev)
+{
+	struct pci_dev *vfdev;
+	unsigned int vfs_assigned = 0;
+	unsigned short dev_id;
+
+	/* only search if we are a PF */
+	if (!dev->is_physfn)
+		return 0;
+
+	/*
+	 * determine the device ID for the VFs, the vendor ID will be the
+	 * same as the PF so there is no need to check for that one
+	 */
+	pci_read_config_word(dev, dev->sriov->pos + PCI_SRIOV_VF_DID, &dev_id);
+
+	/* loop through all the VFs to see if we own any that are assigned */
+	vfdev = pci_get_device(dev->vendor, dev_id, NULL);
+	while (vfdev) {
+		/*
+		 * It is considered assigned if it is a virtual function with
+		 * our dev as the physical function and the assigned bit is set
+		 */
+		if (vfdev->is_virtfn && (vfdev->physfn == dev) &&
+		    (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED))
+			vfs_assigned++;
+
+		vfdev = pci_get_device(dev->vendor, dev_id, vfdev);
+	}
+
+	return vfs_assigned;
+}
+EXPORT_SYMBOL_GPL(pci_vfs_assigned);
+
+/**
  * pci_sriov_set_totalvfs -- reduce the TotalVFs available
  * @dev: the PCI PF device
  * @numvfs: number that should be used for TotalVFs supported