staging: wlags49_h2: remove wl_pci.?

These files aren't being built into anything, so remove them.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 0 insertions, 1587 deletions

diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c
deleted file mode 100644
index 785e781b2b18..000000000000
--- a/drivers/staging/wlags49_h2/wl_pci.c
+++ /dev/null
@@ -1,1478 +0,0 @@
-/*******************************************************************************
- * Agere Systems Inc.
- * Wireless device driver for Linux (wlags49).
- *
- * Copyright (c) 1998-2003 Agere Systems Inc.
- * All rights reserved.
- *   http://www.agere.com
- *
- * Initially developed by TriplePoint, Inc.
- *   http://www.triplepoint.com
- *
- *------------------------------------------------------------------------------
- *
- *   This file contains processing and initialization specific to PCI/miniPCI
- *   devices.
- *
- *------------------------------------------------------------------------------
- *
- * SOFTWARE LICENSE
- *
- * This software is provided subject to the following terms and conditions,
- * which you should read carefully before using the software.  Using this
- * software indicates your acceptance of these terms and conditions.  If you do
- * not agree with these terms and conditions, do not use the software.
- *
- * Copyright © 2003 Agere Systems Inc.
- * All rights reserved.
- *
- * Redistribution and use in source or binary forms, with or without
- * modifications, are permitted provided that the following conditions are met:
- *
- * . Redistributions of source code must retain the above copyright notice, this
- *    list of conditions and the following Disclaimer as comments in the code as
- *    well as in the documentation and/or other materials provided with the
- *    distribution.
- *
- * . Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following Disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * . Neither the name of Agere Systems Inc. nor the names of the contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * Disclaimer
- *
- * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
- * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
- * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- *
- ******************************************************************************/
-
-/*******************************************************************************
- * include files
- ******************************************************************************/
-#include <wireless/wl_version.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-//#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/bitops.h>
-#include <asm/uaccess.h>
-
-#include <linux/ethtool.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-
-#include <hcf/debug.h>
-
-#include <hcf.h>
-#include <dhf.h>
-#include <hcfdef.h>
-
-#include <wireless/wl_if.h>
-#include <wireless/wl_internal.h>
-#include <wireless/wl_util.h>
-#include <wireless/wl_main.h>
-#include <wireless/wl_netdev.h>
-#include <wireless/wl_pci.h>
-
-/* define the PCI device Table Cardname and id tables */
-static struct pci_device_id wl_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_0), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_1), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_2), },
-
-	{ }			/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(pci, wl_pci_tbl);
-
-/*******************************************************************************
- * function prototypes
- ******************************************************************************/
-int wl_pci_probe( struct pci_dev *pdev,
-                                const struct pci_device_id *ent );
-void wl_pci_remove(struct pci_dev *pdev);
-int wl_pci_setup( struct pci_dev *pdev );
-void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev );
-
-#ifdef ENABLE_DMA
-int wl_pci_dma_alloc( struct pci_dev *pdev, struct wl_private *lp );
-int wl_pci_dma_free( struct pci_dev *pdev, struct wl_private *lp );
-int wl_pci_dma_alloc_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc );
-int wl_pci_dma_free_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc );
-int wl_pci_dma_alloc_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc );
-int wl_pci_dma_free_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc );
-int wl_pci_dma_alloc_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
-                                   DESC_STRCT **desc, int size );
-int wl_pci_dma_free_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
-                                   DESC_STRCT **desc );
-int wl_pci_dma_alloc_desc( struct pci_dev *pdev, struct wl_private *lp,
-                           DESC_STRCT **desc );
-int wl_pci_dma_free_desc( struct pci_dev *pdev, struct wl_private *lp,
-                           DESC_STRCT **desc );
-int wl_pci_dma_alloc_buf( struct pci_dev *pdev, struct wl_private *lp,
-                          DESC_STRCT *desc, int size );
-int wl_pci_dma_free_buf( struct pci_dev *pdev, struct wl_private *lp,
-                          DESC_STRCT *desc );
-
-void wl_pci_dma_hcf_reclaim_rx( struct wl_private *lp );
-#endif  // ENABLE_DMA
-
-/*******************************************************************************
- * PCI module function registration
- ******************************************************************************/
-static struct pci_driver wl_driver = {
-	.name	  = KBUILD_MODNAME,
-	.id_table = wl_pci_tbl,
-	.probe	  = wl_pci_probe,
-	.remove	  = wl_pci_remove,
-	.suspend  = NULL,
-	.resume	  = NULL
-};
-
-/*******************************************************************************
- *	wl_adapter_init_module()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Called by init_module() to perform PCI-specific driver initialization.
- *
- *  PARAMETERS:
- *
- *      N/A
- *
- *  RETURNS:
- *
- *      0
- *
- ******************************************************************************/
-int wl_adapter_init_module( void )
-{
-    int result;
-
-    DBG_TRACE( DbgInfo, "wl_adapter_init_module() -- PCI\n" );
-
-    result = pci_register_driver( &wl_driver ); //;?replace with pci_module_init, Rubini pg 490
-	//;? why not do something with the result
-
-    return 0;
-} // wl_adapter_init_module
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_adapter_cleanup_module()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Called by cleanup_module() to perform PCI-specific driver cleanup.
- *
- *  PARAMETERS:
- *
- *      N/A
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
-void wl_adapter_cleanup_module( void )
-{
-	//;?how come wl_adapter_cleanup_module is located in a seemingly pci specific module
-    DBG_TRACE( DbgInfo, "wl_adapter_cleanup_module() -- PCI\n" );
-
-    pci_unregister_driver( &wl_driver );
-
-    return;
-} // wl_adapter_cleanup_module
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_adapter_insert()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Called by wl_pci_probe() to continue the process of device insertion.
- *
- *  PARAMETERS:
- *
- *      dev - a pointer to the device's net_device structure
- *
- *  RETURNS:
- *
- *      TRUE or FALSE
- *
- ******************************************************************************/
-int wl_adapter_insert( struct net_device *dev )
-{
-    int result = FALSE;
-
-    DBG_TRACE( DbgInfo, "wl_adapter_insert() -- PCI\n" );
-
-    if( dev == NULL ) {
-        DBG_ERROR( DbgInfo, "net_device pointer is NULL!!!\n" );
-    } else if( dev->priv == NULL ) {
-        DBG_ERROR( DbgInfo, "wl_private pointer is NULL!!!\n" );
-    } else if( wl_insert( dev ) ) { /* Perform remaining device initialization */
-		result = TRUE;
-	} else {
-        DBG_TRACE( DbgInfo, "wl_insert() FAILED\n" );
-    }
-    return result;
-} // wl_adapter_insert
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_adapter_open()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Open the device.
- *
- *  PARAMETERS:
- *
- *      dev - a pointer to the device's net_device structure
- *
- *  RETURNS:
- *
- *      an HCF status code
- *
- ******************************************************************************/
-int wl_adapter_open( struct net_device *dev )
-{
-    int         result = 0;
-    int         hcf_status = HCF_SUCCESS;
-
-    DBG_TRACE( DbgInfo, "wl_adapter_open() -- PCI\n" );
-
-    hcf_status = wl_open( dev );
-
-    if( hcf_status != HCF_SUCCESS ) {
-        result = -ENODEV;
-    }
-
-    return result;
-} // wl_adapter_open
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_adapter_close()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Close the device
- *
- *  PARAMETERS:
- *
- *      dev - a pointer to the device's net_device structure
- *
- *  RETURNS:
- *
- *      0
- *
- ******************************************************************************/
-int wl_adapter_close( struct net_device *dev )
-{
-    DBG_TRACE( DbgInfo, "wl_adapter_close() -- PCI\n" );
-    DBG_TRACE( DbgInfo, "%s: Shutting down adapter.\n", dev->name );
-
-    wl_close( dev );
-
-    return 0;
-} // wl_adapter_close
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_adapter_is_open()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Check whether this device is open. Returns
- *
- *  PARAMETERS:
- *
- *      dev - a pointer to the device's net_device structure
- *
- *  RETURNS:
- *
- *      nonzero if device is open.
- *
- ******************************************************************************/
-int wl_adapter_is_open( struct net_device *dev )
-{
-    /* This function is used in PCMCIA to check the status of the 'open' field
-       in the dev_link_t structure associated with a network device. There
-       doesn't seem to be an analog to this for PCI, and checking the status
-       contained in the net_device structure doesn't have the same effect.
-       For now, return TRUE, but find out if this is necessary for PCI. */
-
-    return TRUE;
-} // wl_adapter_is_open
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_probe()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Registered in the pci_driver structure, this function is called when the
- *  PCI subsystem finds a new PCI device which matches the information contained
- *  in the pci_device_id table.
- *
- *  PARAMETERS:
- *
- *      pdev    - a pointer to the device's pci_dev structure
- *      ent     - this device's entry in the pci_device_id table
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_probe( struct pci_dev *pdev,
-                                const struct pci_device_id *ent )
-{
-    int result;
-
-	DBG_PRINT( "%s\n", VERSION_INFO );
-
-    result = wl_pci_setup( pdev );
-
-    return result;
-} // wl_pci_probe
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_remove()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Registered in the pci_driver structure, this function is called when the
- *  PCI subsystem detects that a PCI device which matches the information
- *  contained in the pci_device_id table has been removed.
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
-void wl_pci_remove(struct pci_dev *pdev)
-{
-    struct net_device       *dev = NULL;
-
-    /* Make sure the pci_dev pointer passed in is valid */
-    if( pdev == NULL ) {
-        DBG_ERROR( DbgInfo, "PCI subsys passed in an invalid pci_dev pointer\n" );
-        return;
-    }
-
-    dev = pci_get_drvdata( pdev );
-    if( dev == NULL ) {
-        DBG_ERROR( DbgInfo, "Could not retrieve net_device structure\n" );
-        return;
-    }
-
-    /* Perform device cleanup */
-    wl_remove( dev );
-    free_irq( dev->irq, dev );
-
-#ifdef ENABLE_DMA
-    wl_pci_dma_free( pdev, dev->priv );
-#endif
-
-    wl_device_dealloc( dev );
-
-    return;
-} // wl_pci_remove
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_setup()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Called by wl_pci_probe() to begin a device's initialization process.
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_setup( struct pci_dev *pdev )
-{
-    int                 result = 0;
-    struct net_device   *dev = NULL;
-    struct wl_private   *lp = NULL;
-
-    /* Make sure the pci_dev pointer passed in is valid */
-    if( pdev == NULL ) {
-        DBG_ERROR( DbgInfo, "PCI subsys passed in an invalid pci_dev pointer\n" );
-        return -ENODEV;
-    }
-
-    result = pci_enable_device( pdev );
-    if( result != 0 ) {
-        DBG_ERROR( DbgInfo, "pci_enable_device() failed\n" );
-        return result;
-    }
-
-    /* We found our device! Let's register it with the system */
-    DBG_TRACE( DbgInfo, "Found our device, now registering\n" );
-    dev = wl_device_alloc( );
-    if( dev == NULL ) {
-        DBG_ERROR( DbgInfo, "Could not register device!!!\n" );
-        return -ENOMEM;
-    }
-
-    /* Make sure that space was allocated for our private adapter struct */
-    if( dev->priv == NULL ) {
-        DBG_ERROR( DbgInfo, "Private adapter struct was not allocated!!!\n" );
-	wl_device_dealloc(dev);
-        return -ENOMEM;
-    }
-
-#ifdef ENABLE_DMA
-    /* Allocate DMA Descriptors */
-    if( wl_pci_dma_alloc( pdev, dev->priv ) < 0 ) {
-        DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" );
-	wl_device_dealloc(dev);
-        return -ENOMEM;
-    }
-#endif
-
-    /* Register our private adapter structure with PCI */
-    pci_set_drvdata( pdev, dev );
-
-    /* Fill out bus specific information in the net_device struct */
-    dev->irq = pdev->irq;
-    SET_MODULE_OWNER( dev );
-
-    DBG_TRACE( DbgInfo, "Device Base Address: %#03lx\n", pdev->resource[0].start );
-	dev->base_addr = pdev->resource[0].start;
-
-    /* Initialize our device here */
-    if( !wl_adapter_insert( dev )) {
-        DBG_ERROR( DbgInfo, "wl_adapter_insert() FAILED!!!\n" );
-        wl_device_dealloc( dev );
-        return -EINVAL;
-    }
-
-    /* Register our ISR */
-    DBG_TRACE( DbgInfo, "Registering ISR...\n" );
-
-    result = request_irq(dev->irq, wl_isr, SA_SHIRQ, dev->name, dev);
-    if( result ) {
-        DBG_WARNING( DbgInfo, "Could not register ISR!!!\n" );
-	wl_remove(dev);
-	wl_device_dealloc(dev);
-        return result;
-	}
-
-    /* Make sure interrupts are enabled properly for CardBus */
-    lp = dev->priv;
-
-    if( lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_CARDBUS ||
-	    lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_PCI 		) {
-        DBG_TRACE( DbgInfo, "This is a PCI/CardBus card, enable interrupts\n" );
-        wl_pci_enable_cardbus_interrupts( pdev );
-    }
-
-    /* Enable bus mastering */
-    pci_set_master( pdev );
-
-    return 0;
-} // wl_pci_setup
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_enable_cardbus_interrupts()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Called by wl_pci_setup() to enable interrupts on a CardBus device. This
- *  is done by writing bit 15 to the function event mask register. This
- *  CardBus-specific register is located in BAR2 (counting from BAR0), in memory
- *  space at byte offset 1f4 (7f4 for WARP).
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
-void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev )
-{
-    u32                 bar2_reg;
-    u32                 mem_addr_bus;
-    u32                 func_evt_mask_reg;
-    void                *mem_addr_kern = NULL;
-
-    /* Initialize to known bad values */
-    bar2_reg = 0xdeadbeef;
-    mem_addr_bus = 0xdeadbeef;
-
-    /* Read the BAR2 register; this register contains the base address of the
-       memory region where the function event mask register lives */
-    pci_read_config_dword( pdev, PCI_BASE_ADDRESS_2, &bar2_reg );
-    mem_addr_bus = bar2_reg & PCI_BASE_ADDRESS_MEM_MASK;
-
-    /* Once the base address is obtained, remap the memory region to kernel
-       space so we can retrieve the register */
-    mem_addr_kern = ioremap( mem_addr_bus, 0x200 );
-
-#ifdef HERMES25
-#define REG_OFFSET  0x07F4
-#else
-#define REG_OFFSET  0x01F4
-#endif // HERMES25
-
-#define BIT15       0x8000
-
-    /* Retrieve the functional event mask register, enable interrupts by
-       setting Bit 15, and write back the value */
-    func_evt_mask_reg = *(u32 *)( mem_addr_kern + REG_OFFSET );
-    func_evt_mask_reg |= BIT15;
-    *(u32 *)( mem_addr_kern + REG_OFFSET ) = func_evt_mask_reg;
-
-    /* Once complete, unmap the region and exit */
-    iounmap( mem_addr_kern );
-} // wl_pci_enable_cardbus_interrupts
-/*============================================================================*/
-
-#ifdef ENABLE_DMA
-/*******************************************************************************
- *	wl_pci_dma_alloc()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates all resources needed for PCI/CardBus DMA operation
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_alloc( struct pci_dev *pdev, struct wl_private *lp )
-{
-    int i;
-    int status = 0;
-
-//     lp->dma.tx_rsc_ind = lp->dma.rx_rsc_ind = 0;
-//
-//     /* Alloc for the Tx chain and its reclaim descriptor */
-//     for( i = 0; i < NUM_TX_DESC; i++ ) {
-//         status = wl_pci_dma_alloc_tx_packet( pdev, lp, &lp->dma.tx_packet[i] );
-//         if( status == 0 ) {
-//             DBG_PRINT( "lp->dma.tx_packet[%d] :                 0x%p\n", i, lp->dma.tx_packet[i] );
-//             DBG_PRINT( "lp->dma.tx_packet[%d]->next_desc_addr : 0x%p\n", i, lp->dma.tx_packet[i]->next_desc_addr );
-//             lp->dma.tx_rsc_ind++;
-//         } else {
-//             DBG_ERROR( DbgInfo, "Could not alloc DMA Tx Packet\n" );
-//             break;
-//         }
-//     }
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_desc( pdev, lp, &lp->dma.tx_reclaim_desc );
-//         DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc );
-//     }
-//     /* Alloc for the Rx chain and its reclaim descriptor */
-//     if( status == 0 ) {
-//         for( i = 0; i < NUM_RX_DESC; i++ ) {
-//             status = wl_pci_dma_alloc_rx_packet( pdev, lp, &lp->dma.rx_packet[i] );
-//             if( status == 0 ) {
-//                 DBG_PRINT( "lp->dma.rx_packet[%d]                 : 0x%p\n", i, lp->dma.rx_packet[i] );
-//                 DBG_PRINT( "lp->dma.rx_packet[%d]->next_desc_addr : 0x%p\n", i, lp->dma.rx_packet[i]->next_desc_addr );
-//                 lp->dma.rx_rsc_ind++;
-//             } else {
-//                 DBG_ERROR( DbgInfo, "Could not alloc DMA Rx Packet\n" );
-//                 break;
-//             }
-//         }
-//     }
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_desc( pdev, lp, &lp->dma.rx_reclaim_desc );
-//         DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc );
-//     }
-//     /* Store status, as host should not call HCF functions if this fails */
-//     lp->dma.status = status;  //;?all useages of dma.status have been commented out
-    return status;
-} // wl_pci_dma_alloc
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_free()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Deallocated all resources needed for PCI/CardBus DMA operation
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_free( struct pci_dev *pdev, struct wl_private *lp )
-{
-    int i;
-    int status = 0;
-
-    /* Reclaim all Rx packets that were handed over to the HCF */
-    /* Do I need to do this? Before this free is called, I've already disabled
-       the port which will call wl_pci_dma_hcf_reclaim */
-    //if( lp->dma.status == 0 )
-    //{
-    //    wl_pci_dma_hcf_reclaim( lp );
-    //}
-
-    /* Free everything needed for DMA Rx */
-    for( i = 0; i < NUM_RX_DESC; i++ ) {
-        if( lp->dma.rx_packet[i] ) {
-            status = wl_pci_dma_free_rx_packet( pdev, lp, &lp->dma.rx_packet[i] );
-            if( status != 0 ) {
-                DBG_WARNING( DbgInfo, "Problem freeing Rx packet\n" );
-            }
-        }
-    }
-    lp->dma.rx_rsc_ind = 0;
-
-    if( lp->dma.rx_reclaim_desc ) {
-        status = wl_pci_dma_free_desc( pdev, lp, &lp->dma.rx_reclaim_desc );
-        if( status != 0 ) {
-            DBG_WARNING( DbgInfo, "Problem freeing Rx reclaim descriptor\n" );
-        }
-    }
-
-    /* Free everything needed for DMA Tx */
-    for( i = 0; i < NUM_TX_DESC; i++ ) {
-        if( lp->dma.tx_packet[i] ) {
-            status = wl_pci_dma_free_tx_packet( pdev, lp, &lp->dma.tx_packet[i] );
-            if( status != 0 ) {
-                DBG_WARNING( DbgInfo, "Problem freeing Tx packet\n" );
-            }
-        }
-    }
-    lp->dma.tx_rsc_ind = 0;
-
-    if( lp->dma.tx_reclaim_desc ) {
-        status = wl_pci_dma_free_desc( pdev, lp, &lp->dma.tx_reclaim_desc );
-        if( status != 0 ) {
-            DBG_WARNING( DbgInfo, "Problem freeing Tx reclaim descriptor\n" );
-        }
-    }
-
-    return status;
-} // wl_pci_dma_free
-
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_alloc_tx_packet()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates a single Tx packet, consisting of several descriptors and
- *      buffers. Data to transmit is first copied into the 'payload' buffer
- *      before being transmitted.
- *
- *  PARAMETERS:
- *
- *      pdev    - a pointer to the device's pci_dev structure
- *      lp      - the device's private adapter structure
- *      desc    - a pointer which will reference the descriptor to be alloc'd.
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_alloc_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc )
-{
-//     int status = 0;
-//     /*------------------------------------------------------------------------*/
-//
-//     if( desc == NULL ) {
-//         status = -EFAULT;
-//     }
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_desc_and_buf( pdev, lp, desc,
-//                                                 HCF_DMA_TX_BUF1_SIZE );
-//
-//         if( status == 0 ) {
-//             status = wl_pci_dma_alloc_desc_and_buf( pdev, lp,
-//                                                     &( (*desc)->next_desc_addr ),
-//                                                     HCF_MAX_PACKET_SIZE );
-//         }
-//     }
-//     if( status == 0 ) {
-//         (*desc)->next_desc_phys_addr = (*desc)->next_desc_addr->desc_phys_addr;
-//     }
-//     return status;
-} // wl_pci_dma_alloc_tx_packet
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_free_tx_packet()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Frees a single Tx packet, described in the corresponding alloc function.
- *
- *  PARAMETERS:
- *
- *      pdev    - a pointer to the device's pci_dev structure
- *      lp      - the device's private adapter structure
- *      desc    - a pointer which will reference the descriptor to be alloc'd.
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_free_tx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc )
-{
-    int status = 0;
-    /*------------------------------------------------------------------------*/
-
-    if( *desc == NULL ) {
-        DBG_PRINT( "Null descriptor\n" );
-        status = -EFAULT;
-    }
-	//;?the "limited" NDIS strategy, assuming a frame consists ALWAYS out of 2
-	//descriptors, make this robust
-    if( status == 0 && (*desc)->next_desc_addr ) {
-        status = wl_pci_dma_free_desc_and_buf( pdev, lp, &(*desc)->next_desc_addr );
-    }
-    if( status == 0 ) {
-        status = wl_pci_dma_free_desc_and_buf( pdev, lp, desc );
-    }
-    return status;
-} // wl_pci_dma_free_tx_packet
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_alloc_rx_packet()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates a single Rx packet, consisting of two descriptors and one
- *      contiguous buffer. The buffer starts with the hermes-specific header.
- *      One descriptor points at the start, the other at offset 0x3a of the
- *      buffer.
- *
- *  PARAMETERS:
- *
- *      pdev    - a pointer to the device's pci_dev structure
- *      lp      - the device's private adapter structure
- *      desc    - a pointer which will reference the descriptor to be alloc'd.
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_alloc_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc )
-{
-    int         status = 0;
-    DESC_STRCT  *p;
-    /*------------------------------------------------------------------------*/
-
-//     if( desc == NULL ) {
-//         status = -EFAULT;
-//     }
-// 	//;?the "limited" NDIS strategy, assuming a frame consists ALWAYS out of 2
-// 	//descriptors, make this robust
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_desc( pdev, lp, desc );
-// 	}
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_buf( pdev, lp, *desc, HCF_MAX_PACKET_SIZE );
-//     }
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_desc( pdev, lp, &p );
-//     }
-//     if( status == 0 ) {
-//         /* Size of 1st descriptor becomes 0x3a bytes */
-//         SET_BUF_SIZE( *desc, HCF_DMA_RX_BUF1_SIZE );
-//
-//         /* Make 2nd descriptor point at offset 0x3a of the buffer */
-//         SET_BUF_SIZE( p, ( HCF_MAX_PACKET_SIZE - HCF_DMA_RX_BUF1_SIZE ));
-//         p->buf_addr       = (*desc)->buf_addr + HCF_DMA_RX_BUF1_SIZE;
-//         p->buf_phys_addr  = (*desc)->buf_phys_addr + HCF_DMA_RX_BUF1_SIZE;
-//         p->next_desc_addr = NULL;
-//
-//         /* Chain 2nd descriptor to 1st descriptor */
-//         (*desc)->next_desc_addr      = p;
-//         (*desc)->next_desc_phys_addr = p->desc_phys_addr;
-//     }
-
-    return status;
-} // wl_pci_dma_alloc_rx_packet
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_free_rx_packet()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Frees a single Rx packet, described in the corresponding alloc function.
- *
- *  PARAMETERS:
- *
- *      pdev    - a pointer to the device's pci_dev structure
- *      lp      - the device's private adapter structure
- *      desc    - a pointer which will reference the descriptor to be alloc'd.
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_free_rx_packet( struct pci_dev *pdev, struct wl_private *lp,
-                                DESC_STRCT **desc )
-{
-    int status = 0;
-    DESC_STRCT *p;
-    /*------------------------------------------------------------------------*/
-
-    if( *desc == NULL ) {
-        status = -EFAULT;
-    }
-    if( status == 0 ) {
-        p = (*desc)->next_desc_addr;
-
-        /* Free the 2nd descriptor */
-        if( p != NULL ) {
-            p->buf_addr      = NULL;
-            p->buf_phys_addr = 0;
-
-            status = wl_pci_dma_free_desc( pdev, lp, &p );
-        }
-    }
-
-    /* Free the buffer and 1st descriptor */
-    if( status == 0 ) {
-        SET_BUF_SIZE( *desc, HCF_MAX_PACKET_SIZE );
-        status = wl_pci_dma_free_desc_and_buf( pdev, lp, desc );
-    }
-    return status;
-} // wl_pci_dma_free_rx_packet
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_alloc_desc_and_buf()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates a DMA descriptor and buffer, and associates them with one
- *      another.
- *
- *  PARAMETERS:
- *
- *      pdev  - a pointer to the device's pci_dev structure
- *      lp    - the device's private adapter structure
- *      desc  - a pointer which will reference the descriptor to be alloc'd
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_alloc_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
-                                   DESC_STRCT **desc, int size )
-{
-    int status = 0;
-    /*------------------------------------------------------------------------*/
-
-//     if( desc == NULL ) {
-//         status = -EFAULT;
-//     }
-//     if( status == 0 ) {
-//         status = wl_pci_dma_alloc_desc( pdev, lp, desc );
-//
-//         if( status == 0 ) {
-//             status = wl_pci_dma_alloc_buf( pdev, lp, *desc, size );
-//         }
-//     }
-    return status;
-} // wl_pci_dma_alloc_desc_and_buf
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_free_desc_and_buf()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Frees a DMA descriptor and associated buffer.
- *
- *  PARAMETERS:
- *
- *      pdev  - a pointer to the device's pci_dev structure
- *      lp    - the device's private adapter structure
- *      desc  - a pointer which will reference the descriptor to be alloc'd
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_free_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp,
-                                   DESC_STRCT **desc )
-{
-    int status = 0;
-    /*------------------------------------------------------------------------*/
-
-    if( desc == NULL ) {
-        status = -EFAULT;
-    }
-    if( status == 0 && *desc == NULL ) {
-        status = -EFAULT;
-    }
-    if( status == 0 ) {
-        status = wl_pci_dma_free_buf( pdev, lp, *desc );
-
-        if( status == 0 ) {
-            status = wl_pci_dma_free_desc( pdev, lp, desc );
-        }
-    }
-    return status;
-} // wl_pci_dma_free_desc_and_buf
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_alloc_desc()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates one DMA descriptor in cache coherent memory.
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_alloc_desc( struct pci_dev *pdev, struct wl_private *lp,
-                           DESC_STRCT **desc )
-{
-//     int         status = 0;
-//     dma_addr_t  pa;
-//
-//     if( desc == NULL ) {
-//         status = -EFAULT;
-//     }
-//     if( status == 0 ) {
-//         *desc = pci_alloc_consistent( pdev, sizeof( DESC_STRCT ), &pa );
-//     }
-//     if( *desc == NULL ) {
-//         DBG_ERROR( DbgInfo, "pci_alloc_consistent() failed\n" );
-//         status = -ENOMEM;
-//     } else {
-//         memset( *desc, 0, sizeof( DESC_STRCT ));
-//         (*desc)->desc_phys_addr = cpu_to_le32( pa );
-//     }
-//     return status;
-} // wl_pci_dma_alloc_desc
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_free_desc()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Frees one DMA descriptor in cache coherent memory.
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_free_desc( struct pci_dev *pdev, struct wl_private *lp,
-                           DESC_STRCT **desc )
-{
-    int         status = 0;
-    /*------------------------------------------------------------------------*/
-
-    if( *desc == NULL ) {
-        status = -EFAULT;
-    }
-    if( status == 0 ) {
-        pci_free_consistent( pdev, sizeof( DESC_STRCT ), *desc,
-                             (*desc)->desc_phys_addr );
-    }
-    *desc = NULL;
-    return status;
-} // wl_pci_dma_free_desc
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_alloc_buf()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates one DMA buffer in cache coherent memory, and associates a DMA
- *      descriptor with this buffer.
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_alloc_buf( struct pci_dev *pdev, struct wl_private *lp,
-                          DESC_STRCT *desc, int size )
-{
-    int         status = 0;
-    dma_addr_t  pa;
-//
-//     if( desc == NULL ) {
-//         status = -EFAULT;
-//     }
-//     if( status == 0 && desc->buf_addr != NULL ) {
-//         status = -EFAULT;
-//     }
-//     if( status == 0 ) {
-//         desc->buf_addr = pci_alloc_consistent( pdev, size, &pa );
-//     }
-//     if( desc->buf_addr == NULL ) {
-//         DBG_ERROR( DbgInfo, "pci_alloc_consistent() failed\n" );
-//         status = -ENOMEM;
-//     } else {
-//         desc->buf_phys_addr = cpu_to_le32( pa );
-//         SET_BUF_SIZE( desc, size );
-//     }
-    return status;
-} // wl_pci_dma_alloc_buf
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_free_buf()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Allocates one DMA buffer in cache coherent memory, and associates a DMA
- *      descriptor with this buffer.
- *
- *  PARAMETERS:
- *
- *      pdev - a pointer to the device's pci_dev structure
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-int wl_pci_dma_free_buf( struct pci_dev *pdev, struct wl_private *lp,
-                         DESC_STRCT *desc )
-{
-    int         status = 0;
-    /*------------------------------------------------------------------------*/
-
-    if( desc == NULL ) {
-        status = -EFAULT;
-    }
-    if( status == 0 && desc->buf_addr == NULL ) {
-        status = -EFAULT;
-    }
-    if( status == 0 ) {
-        pci_free_consistent( pdev, GET_BUF_SIZE( desc ), desc->buf_addr,
-                             desc->buf_phys_addr );
-
-        desc->buf_addr = 0;
-        desc->buf_phys_addr = 0;
-        SET_BUF_SIZE( desc, 0 );
-    }
-    return status;
-} // wl_pci_dma_free_buf
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_hcf_supply()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Supply HCF with DMA-related resources. These consist of:
- *          - buffers and descriptors for receive purposes
- *          - one 'reclaim' descriptor for the transmit path, used to fulfill a
- *            certain H25 DMA engine requirement
- *          - one 'reclaim' descriptor for the receive path, used to fulfill a
- *            certain H25 DMA engine requirement
- *
- *      This function is called at start-of-day or at re-initialization.
- *
- *  PARAMETERS:
- *
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-void wl_pci_dma_hcf_supply( struct wl_private *lp )
-{
-    int i;
-
-    //if( lp->dma.status == 0 );
-    //{
-        /* Hand over the Rx/Tx reclaim descriptors to the HCF */
-        if( lp->dma.tx_reclaim_desc ) {
-            DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc );
-            hcf_dma_tx_put( &lp->hcfCtx, lp->dma.tx_reclaim_desc, 0 );
-            lp->dma.tx_reclaim_desc = NULL;
-            DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc );
-        }
-        if( lp->dma.rx_reclaim_desc ) {
-            DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc );
-            hcf_dma_rx_put( &lp->hcfCtx, lp->dma.rx_reclaim_desc );
-            lp->dma.rx_reclaim_desc = NULL;
-            DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc );
-        }
-        /* Hand over the Rx descriptor chain to the HCF */
-        for( i = 0; i < NUM_RX_DESC; i++ ) {
-            DBG_PRINT( "lp->dma.rx_packet[%d]:    0x%p\n", i, lp->dma.rx_packet[i] );
-            hcf_dma_rx_put( &lp->hcfCtx, lp->dma.rx_packet[i] );
-            lp->dma.rx_packet[i] = NULL;
-            DBG_PRINT( "lp->dma.rx_packet[%d]:    0x%p\n", i, lp->dma.rx_packet[i] );
-        }
-    //}
-
-    return;
-} // wl_pci_dma_hcf_supply
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_hcf_reclaim()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Return DMA-related resources from the HCF. These consist of:
- *          - buffers and descriptors for receive purposes
- *          - buffers and descriptors for transmit purposes
- *          - one 'reclaim' descriptor for the transmit path, used to fulfill a
- *            certain H25 DMA engine requirement
- *          - one 'reclaim' descriptor for the receive path, used to fulfill a
- *            certain H25 DMA engine requirement
- *
- *      This function is called at end-of-day or at re-initialization.
- *
- *  PARAMETERS:
- *
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-void wl_pci_dma_hcf_reclaim( struct wl_private *lp )
-{
-    int i;
-
-    wl_pci_dma_hcf_reclaim_rx( lp );
-    for( i = 0; i < NUM_RX_DESC; i++ ) {
-        DBG_PRINT( "rx_packet[%d] 0x%p\n", i, lp->dma.rx_packet[i] );
-//         if( lp->dma.rx_packet[i] == NULL ) {
-//             DBG_PRINT( "wl_pci_dma_hcf_reclaim: rx_packet[%d] NULL\n", i );
-//         }
-    }
-
-    wl_pci_dma_hcf_reclaim_tx( lp );
-    for( i = 0; i < NUM_TX_DESC; i++ ) {
-        DBG_PRINT( "tx_packet[%d] 0x%p\n", i, lp->dma.tx_packet[i] );
-//         if( lp->dma.tx_packet[i] == NULL ) {
-//             DBG_PRINT( "wl_pci_dma_hcf_reclaim: tx_packet[%d] NULL\n", i );
-//         }
-     }
-
-    return;
-} // wl_pci_dma_hcf_reclaim
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_hcf_reclaim_rx()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Reclaim Rx packets that have already been processed by the HCF.
- *
- *  PARAMETERS:
- *
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-void wl_pci_dma_hcf_reclaim_rx( struct wl_private *lp )
-{
-    int         i;
-    DESC_STRCT *p;
-
-    //if( lp->dma.status == 0 )
-    //{
-        while ( ( p = hcf_dma_rx_get( &lp->hcfCtx ) ) != NULL ) {
-            if( p && p->buf_addr == NULL ) {
-                /* A reclaim descriptor is being given back by the HCF. Reclaim
-                   descriptors have a NULL buf_addr */
-                lp->dma.rx_reclaim_desc = p;
-            	DBG_PRINT( "reclaim_descriptor: 0x%p\n", p );
-                continue;
-            }
-            for( i = 0; i < NUM_RX_DESC; i++ ) {
-                if( lp->dma.rx_packet[i] == NULL ) {
-                    break;
-                }
-            }
-            /* An Rx buffer descriptor is being given back by the HCF */
-            lp->dma.rx_packet[i] = p;
-            lp->dma.rx_rsc_ind++;
-        	DBG_PRINT( "rx_packet[%d] 0x%p\n", i, lp->dma.rx_packet[i] );
-        }
-    //}
-} // wl_pci_dma_hcf_reclaim_rx
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_get_tx_packet()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Obtains a Tx descriptor from the chain to use for Tx.
- *
- *  PARAMETERS:
- *
- *      lp - a pointer to the device's wl_private structure.
- *
- *  RETURNS:
- *
- *      A pointer to the retrieved descriptor
- *
- ******************************************************************************/
-DESC_STRCT * wl_pci_dma_get_tx_packet( struct wl_private *lp )
-{
-    int i;
-    DESC_STRCT *desc = NULL;
-    /*------------------------------------------------------------------------*/
-
-    for( i = 0; i < NUM_TX_DESC; i++ ) {
-        if( lp->dma.tx_packet[i] ) {
-            break;
-        }
-    }
-
-    if( i != NUM_TX_DESC ) {
-        desc = lp->dma.tx_packet[i];
-
-        lp->dma.tx_packet[i] = NULL;
-        lp->dma.tx_rsc_ind--;
-
-        memset( desc->buf_addr, 0, HCF_DMA_TX_BUF1_SIZE );
-    }
-
-    return desc;
-} // wl_pci_dma_get_tx_packet
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_put_tx_packet()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Returns a Tx descriptor to the chain.
- *
- *  PARAMETERS:
- *
- *      lp   - a pointer to the device's wl_private structure.
- *      desc - a pointer to the descriptor to return.
- *
- *  RETURNS:
- *
- *      N/A
- *
- ******************************************************************************/
-void wl_pci_dma_put_tx_packet( struct wl_private *lp, DESC_STRCT *desc )
-{
-    int i;
-    /*------------------------------------------------------------------------*/
-
-    for( i = 0; i < NUM_TX_DESC; i++ ) {
-        if( lp->dma.tx_packet[i] == NULL ) {
-            break;
-        }
-    }
-
-    if( i != NUM_TX_DESC ) {
-        lp->dma.tx_packet[i] = desc;
-        lp->dma.tx_rsc_ind++;
-    }
-} // wl_pci_dma_put_tx_packet
-/*============================================================================*/
-
-/*******************************************************************************
- *	wl_pci_dma_hcf_reclaim_tx()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Reclaim Tx packets that have either been processed by the HCF due to a
- *      port disable or a Tx completion.
- *
- *  PARAMETERS:
- *
- *      lp  - the device's private adapter structure
- *
- *  RETURNS:
- *
- *      0 on success
- *      errno value otherwise
- *
- ******************************************************************************/
-void wl_pci_dma_hcf_reclaim_tx( struct wl_private *lp )
-{
-    int         i;
-    DESC_STRCT *p;
-
-    //if( lp->dma.status == 0 )
-    //{
-        while ( ( p = hcf_dma_tx_get( &lp->hcfCtx ) ) != NULL ) {
-
-            if( p != NULL && p->buf_addr == NULL ) {
-                /* A Reclaim descriptor is being given back by the HCF. Reclaim
-                   descriptors have a NULL buf_addr */
-                lp->dma.tx_reclaim_desc = p;
-            	DBG_PRINT( "reclaim_descriptor: 0x%p\n", p );
-                continue;
-            }
-            for( i = 0; i < NUM_TX_DESC; i++ ) {
-                if( lp->dma.tx_packet[i] == NULL ) {
-                    break;
-                }
-            }
-            /* An Rx buffer descriptor is being given back by the HCF */
-            lp->dma.tx_packet[i] = p;
-            lp->dma.tx_rsc_ind++;
-        	DBG_PRINT( "tx_packet[%d] 0x%p\n", i, lp->dma.tx_packet[i] );
-        }
-    //}
-
-    if( lp->netif_queue_on == FALSE ) {
-        netif_wake_queue( lp->dev );
-        WL_WDS_NETIF_WAKE_QUEUE( lp );
-        lp->netif_queue_on = TRUE;
-    }
-    return;
-} // wl_pci_dma_hcf_reclaim_tx
-/*============================================================================*/
-#endif  // ENABLE_DMA
diff --git a/drivers/staging/wlags49_h2/wl_pci.h b/drivers/staging/wlags49_h2/wl_pci.h
deleted file mode 100644
index 86831f1b4de2..000000000000
--- a/drivers/staging/wlags49_h2/wl_pci.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*******************************************************************************
- * Agere Systems Inc.
- * Wireless device driver for Linux (wlags49).
- *
- * Copyright (c) 1998-2003 Agere Systems Inc.
- * All rights reserved.
- *   http://www.agere.com
- *
- * Initially developed by TriplePoint, Inc.
- *   http://www.triplepoint.com
- *
- *------------------------------------------------------------------------------
- *
- *   Header describing information required for the driver to support PCI.
- *
- *------------------------------------------------------------------------------
- *
- * SOFTWARE LICENSE
- *
- * This software is provided subject to the following terms and conditions,
- * which you should read carefully before using the software.  Using this
- * software indicates your acceptance of these terms and conditions.  If you do
- * not agree with these terms and conditions, do not use the software.
- *
- * Copyright © 2003 Agere Systems Inc.
- * All rights reserved.
- *
- * Redistribution and use in source or binary forms, with or without
- * modifications, are permitted provided that the following conditions are met:
- *
- * . Redistributions of source code must retain the above copyright notice, this
- *    list of conditions and the following Disclaimer as comments in the code as
- *    well as in the documentation and/or other materials provided with the
- *    distribution.
- *
- * . Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following Disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * . Neither the name of Agere Systems Inc. nor the names of the contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * Disclaimer
- *
- * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
- * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
- * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- *
- ******************************************************************************/
-
-#ifndef __WL_PCI_H__
-#define __WL_PCI_H__
-
-
-
-
-/*******************************************************************************
- *  constant definitions
- ******************************************************************************/
-#define PCI_VENDOR_IDWL_LKM     0x11C1  /* Lucent Microelectronics */
-#define PCI_DEVICE_ID_WL_LKM_0  0xAB30  /* Mini PCI */
-#define PCI_DEVICE_ID_WL_LKM_1  0xAB34  /* Mini PCI */
-#define PCI_DEVICE_ID_WL_LKM_2  0xAB11  /* WARP CardBus */
-
-
-
-
-/*******************************************************************************
- *  function prototypes
- ******************************************************************************/
-int wl_adapter_init_module( void );
-
-void wl_adapter_cleanup_module( void );
-
-int wl_adapter_insert( struct net_device *dev );
-
-int wl_adapter_open( struct net_device *dev );
-
-int wl_adapter_close( struct net_device *dev );
-
-int wl_adapter_is_open( struct net_device *dev );
-
-
-#ifdef ENABLE_DMA
-
-void wl_pci_dma_hcf_supply( struct wl_private *lp );
-
-void wl_pci_dma_hcf_reclaim( struct wl_private *lp );
-
-DESC_STRCT * wl_pci_dma_get_tx_packet( struct wl_private *lp );
-
-void wl_pci_dma_put_tx_packet( struct wl_private *lp, DESC_STRCT *desc );
-
-void wl_pci_dma_hcf_reclaim_tx( struct wl_private *lp );
-
-#endif  // ENABLE_DMA
-
-
-#endif  // __WL_PCI_H__