diff options
author | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2019-05-10 11:45:03 -0700 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2019-05-10 11:45:03 -0700 |
commit | 7f7a0208369ff2cc5590acb9b1388e3d1ade98e9 (patch) | |
tree | f299c7d49e65aca6fb39e72946919ba5de00ca81 /drivers | |
parent | 2a267e7c41aa88215de2b542de797d03d16ecdfd (diff) | |
parent | 796fad0101d370567c2968bd933b865aa57efaa3 (diff) |
Merge tag 'ib-mfd-gpio-input-leds-power-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Sync up with MFD tree to bring in MAX77650 PMIC driver.
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/Kconfig | 7 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/gpio-max77650.c | 190 | ||||
-rw-r--r-- | drivers/input/misc/Kconfig | 9 | ||||
-rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/misc/max77650-onkey.c | 121 | ||||
-rw-r--r-- | drivers/leds/Kconfig | 6 | ||||
-rw-r--r-- | drivers/leds/Makefile | 1 | ||||
-rw-r--r-- | drivers/leds/leds-max77650.c | 147 | ||||
-rw-r--r-- | drivers/mfd/Kconfig | 14 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
-rw-r--r-- | drivers/mfd/max77650.c | 232 | ||||
-rw-r--r-- | drivers/mfd/mfd-core.c | 13 | ||||
-rw-r--r-- | drivers/power/supply/Kconfig | 7 | ||||
-rw-r--r-- | drivers/power/supply/Makefile | 1 | ||||
-rw-r--r-- | drivers/power/supply/max77650-charger.c | 368 |
16 files changed, 1119 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3f50526a771f..c4f912104440 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1112,6 +1112,13 @@ config GPIO_MAX77620 driver also provides interrupt support for each of the gpios. Say yes here to enable the max77620 to be used as gpio controller. +config GPIO_MAX77650 + tristate "Maxim MAX77650/77651 GPIO support" + depends on MFD_MAX77650 + help + GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor. + These chips have a single pin that can be configured as GPIO. + config GPIO_MSIC bool "Intel MSIC mixed signal gpio support" depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 54d55274b93a..075722d8317d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -80,6 +80,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o obj-$(CONFIG_GPIO_MAX77620) += gpio-max77620.o +obj-$(CONFIG_GPIO_MAX77650) += gpio-max77650.o obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o diff --git a/drivers/gpio/gpio-max77650.c b/drivers/gpio/gpio-max77650.c new file mode 100644 index 000000000000..3f03f4e8956c --- /dev/null +++ b/drivers/gpio/gpio-max77650.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// GPIO driver for MAXIM 77650/77651 charger/power-supply. + +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define MAX77650_GPIO_DIR_MASK BIT(0) +#define MAX77650_GPIO_INVAL_MASK BIT(1) +#define MAX77650_GPIO_DRV_MASK BIT(2) +#define MAX77650_GPIO_OUTVAL_MASK BIT(3) +#define MAX77650_GPIO_DEBOUNCE_MASK BIT(4) + +#define MAX77650_GPIO_DIR_OUT 0x00 +#define MAX77650_GPIO_DIR_IN BIT(0) +#define MAX77650_GPIO_OUT_LOW 0x00 +#define MAX77650_GPIO_OUT_HIGH BIT(3) +#define MAX77650_GPIO_DRV_OPEN_DRAIN 0x00 +#define MAX77650_GPIO_DRV_PUSH_PULL BIT(2) +#define MAX77650_GPIO_DEBOUNCE BIT(4) + +#define MAX77650_GPIO_DIR_BITS(_reg) \ + ((_reg) & MAX77650_GPIO_DIR_MASK) +#define MAX77650_GPIO_INVAL_BITS(_reg) \ + (((_reg) & MAX77650_GPIO_INVAL_MASK) >> 1) + +struct max77650_gpio_chip { + struct regmap *map; + struct gpio_chip gc; + int irq; +}; + +static int max77650_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + + return regmap_update_bits(chip->map, + MAX77650_REG_CNFG_GPIO, + MAX77650_GPIO_DIR_MASK, + MAX77650_GPIO_DIR_IN); +} + +static int max77650_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + int mask, regval; + + mask = MAX77650_GPIO_DIR_MASK | MAX77650_GPIO_OUTVAL_MASK; + regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW; + regval |= MAX77650_GPIO_DIR_OUT; + + return regmap_update_bits(chip->map, + MAX77650_REG_CNFG_GPIO, mask, regval); +} + +static void max77650_gpio_set_value(struct gpio_chip *gc, + unsigned int offset, int value) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + int rv, regval; + + regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW; + + rv = regmap_update_bits(chip->map, MAX77650_REG_CNFG_GPIO, + MAX77650_GPIO_OUTVAL_MASK, regval); + if (rv) + dev_err(gc->parent, "cannot set GPIO value: %d\n", rv); +} + +static int max77650_gpio_get_value(struct gpio_chip *gc, + unsigned int offset) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + unsigned int val; + int rv; + + rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val); + if (rv) + return rv; + + return MAX77650_GPIO_INVAL_BITS(val); +} + +static int max77650_gpio_get_direction(struct gpio_chip *gc, + unsigned int offset) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + unsigned int val; + int rv; + + rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val); + if (rv) + return rv; + + return MAX77650_GPIO_DIR_BITS(val); +} + +static int max77650_gpio_set_config(struct gpio_chip *gc, + unsigned int offset, unsigned long cfg) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + + switch (pinconf_to_config_param(cfg)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(chip->map, + MAX77650_REG_CNFG_GPIO, + MAX77650_GPIO_DRV_MASK, + MAX77650_GPIO_DRV_OPEN_DRAIN); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(chip->map, + MAX77650_REG_CNFG_GPIO, + MAX77650_GPIO_DRV_MASK, + MAX77650_GPIO_DRV_PUSH_PULL); + case PIN_CONFIG_INPUT_DEBOUNCE: + return regmap_update_bits(chip->map, + MAX77650_REG_CNFG_GPIO, + MAX77650_GPIO_DEBOUNCE_MASK, + MAX77650_GPIO_DEBOUNCE); + default: + return -ENOTSUPP; + } +} + +static int max77650_gpio_to_irq(struct gpio_chip *gc, unsigned int offset) +{ + struct max77650_gpio_chip *chip = gpiochip_get_data(gc); + + return chip->irq; +} + +static int max77650_gpio_probe(struct platform_device *pdev) +{ + struct max77650_gpio_chip *chip; + struct device *dev, *parent; + struct i2c_client *i2c; + + dev = &pdev->dev; + parent = dev->parent; + i2c = to_i2c_client(parent); + + chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->map = dev_get_regmap(parent, NULL); + if (!chip->map) + return -ENODEV; + + chip->irq = platform_get_irq_byname(pdev, "GPI"); + if (chip->irq < 0) + return chip->irq; + + chip->gc.base = -1; + chip->gc.ngpio = 1; + chip->gc.label = i2c->name; + chip->gc.parent = dev; + chip->gc.owner = THIS_MODULE; + chip->gc.can_sleep = true; + + chip->gc.direction_input = max77650_gpio_direction_input; + chip->gc.direction_output = max77650_gpio_direction_output; + chip->gc.set = max77650_gpio_set_value; + chip->gc.get = max77650_gpio_get_value; + chip->gc.get_direction = max77650_gpio_get_direction; + chip->gc.set_config = max77650_gpio_set_config; + chip->gc.to_irq = max77650_gpio_to_irq; + + return devm_gpiochip_add_data(dev, &chip->gc, chip); +} + +static struct platform_driver max77650_gpio_driver = { + .driver = { + .name = "max77650-gpio", + }, + .probe = max77650_gpio_probe, +}; +module_platform_driver(max77650_gpio_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 GPIO driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 6dfe9e2fe5b1..54d36f98b426 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -190,6 +190,15 @@ config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K +config INPUT_MAX77650_ONKEY + tristate "Maxim MAX77650 ONKEY support" + depends on MFD_MAX77650 + help + Support the ONKEY of the MAX77650 PMIC as an input device. + + To compile this driver as a module, choose M here: the module + will be called max77650-onkey. + config INPUT_MAX77693_HAPTIC tristate "MAXIM MAX77693/MAX77843 haptic controller support" depends on (MFD_MAX77693 || MFD_MAX77843) && PWM diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index f38ebbdb05e2..8fd187f314bd 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o +obj-$(CONFIG_INPUT_MAX77650_ONKEY) += max77650-onkey.o obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o diff --git a/drivers/input/misc/max77650-onkey.c b/drivers/input/misc/max77650-onkey.c new file mode 100644 index 000000000000..fbf6caab7217 --- /dev/null +++ b/drivers/input/misc/max77650-onkey.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// ONKEY driver for MAXIM 77650/77651 charger/power-supply. + +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define MAX77650_ONKEY_MODE_MASK BIT(3) +#define MAX77650_ONKEY_MODE_PUSH 0x00 +#define MAX77650_ONKEY_MODE_SLIDE BIT(3) + +struct max77650_onkey { + struct input_dev *input; + unsigned int code; +}; + +static irqreturn_t max77650_onkey_falling(int irq, void *data) +{ + struct max77650_onkey *onkey = data; + + input_report_key(onkey->input, onkey->code, 0); + input_sync(onkey->input); + + return IRQ_HANDLED; +} + +static irqreturn_t max77650_onkey_rising(int irq, void *data) +{ + struct max77650_onkey *onkey = data; + + input_report_key(onkey->input, onkey->code, 1); + input_sync(onkey->input); + + return IRQ_HANDLED; +} + +static int max77650_onkey_probe(struct platform_device *pdev) +{ + int irq_r, irq_f, error, mode; + struct max77650_onkey *onkey; + struct device *dev, *parent; + struct regmap *map; + unsigned int type; + + dev = &pdev->dev; + parent = dev->parent; + + map = dev_get_regmap(parent, NULL); + if (!map) + return -ENODEV; + + onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL); + if (!onkey) + return -ENOMEM; + + error = device_property_read_u32(dev, "linux,code", &onkey->code); + if (error) + onkey->code = KEY_POWER; + + if (device_property_read_bool(dev, "maxim,onkey-slide")) { + mode = MAX77650_ONKEY_MODE_SLIDE; + type = EV_SW; + } else { + mode = MAX77650_ONKEY_MODE_PUSH; + type = EV_KEY; + } + + error = regmap_update_bits(map, MAX77650_REG_CNFG_GLBL, + MAX77650_ONKEY_MODE_MASK, mode); + if (error) + return error; + + irq_f = platform_get_irq_byname(pdev, "nEN_F"); + if (irq_f < 0) + return irq_f; + + irq_r = platform_get_irq_byname(pdev, "nEN_R"); + if (irq_r < 0) + return irq_r; + + onkey->input = devm_input_allocate_device(dev); + if (!onkey->input) + return -ENOMEM; + + onkey->input->name = "max77650_onkey"; + onkey->input->phys = "max77650_onkey/input0"; + onkey->input->id.bustype = BUS_I2C; + input_set_capability(onkey->input, type, onkey->code); + + error = devm_request_any_context_irq(dev, irq_f, max77650_onkey_falling, + IRQF_ONESHOT, "onkey-down", onkey); + if (error < 0) + return error; + + error = devm_request_any_context_irq(dev, irq_r, max77650_onkey_rising, + IRQF_ONESHOT, "onkey-up", onkey); + if (error < 0) + return error; + + return input_register_device(onkey->input); +} + +static struct platform_driver max77650_onkey_driver = { + .driver = { + .name = "max77650-onkey", + }, + .probe = max77650_onkey_probe, +}; +module_platform_driver(max77650_onkey_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 ONKEY driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index a72f97fca57b..d8c70cc6a714 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -608,6 +608,12 @@ config LEDS_TLC591XX This option enables support for Texas Instruments TLC59108 and TLC59116 LED controllers. +config LEDS_MAX77650 + tristate "LED support for Maxim MAX77650 PMIC" + depends on LEDS_CLASS && MFD_MAX77650 + help + LEDs driver for MAX77650 family of PMICs from Maxim Integrated. + config LEDS_MAX77693 tristate "LED support for MAX77693 Flash" depends on LEDS_CLASS_FLASH diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 4c1b0054f379..f48b2404dbb7 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o obj-$(CONFIG_LEDS_NS2) += leds-ns2.o obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o +obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o diff --git a/drivers/leds/leds-max77650.c b/drivers/leds/leds-max77650.c new file mode 100644 index 000000000000..6b74ce9cac12 --- /dev/null +++ b/drivers/leds/leds-max77650.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// LED driver for MAXIM 77650/77651 charger/power-supply. + +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define MAX77650_LED_NUM_LEDS 3 + +#define MAX77650_LED_A_BASE 0x40 +#define MAX77650_LED_B_BASE 0x43 + +#define MAX77650_LED_BR_MASK GENMASK(4, 0) +#define MAX77650_LED_EN_MASK GENMASK(7, 6) + +#define MAX77650_LED_MAX_BRIGHTNESS MAX77650_LED_BR_MASK + +/* Enable EN_LED_MSTR. */ +#define MAX77650_LED_TOP_DEFAULT BIT(0) + +#define MAX77650_LED_ENABLE GENMASK(7, 6) +#define MAX77650_LED_DISABLE 0x00 + +#define MAX77650_LED_A_DEFAULT MAX77650_LED_DISABLE +/* 100% on duty */ +#define MAX77650_LED_B_DEFAULT GENMASK(3, 0) + +struct max77650_led { + struct led_classdev cdev; + struct regmap *map; + unsigned int regA; + unsigned int regB; +}; + +static struct max77650_led *max77650_to_led(struct led_classdev *cdev) +{ + return container_of(cdev, struct max77650_led, cdev); +} + +static int max77650_led_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct max77650_led *led = max77650_to_led(cdev); + int val, mask; + + mask = MAX77650_LED_BR_MASK | MAX77650_LED_EN_MASK; + + if (brightness == LED_OFF) + val = MAX77650_LED_DISABLE; + else + val = MAX77650_LED_ENABLE | brightness; + + return regmap_update_bits(led->map, led->regA, mask, val); +} + +static int max77650_led_probe(struct platform_device *pdev) +{ + struct device_node *of_node, *child; + struct max77650_led *leds, *led; + struct device *parent; + struct device *dev; + struct regmap *map; + const char *label; + int rv, num_leds; + u32 reg; + + dev = &pdev->dev; + parent = dev->parent; + of_node = dev->of_node; + + if (!of_node) + return -ENODEV; + + leds = devm_kcalloc(dev, sizeof(*leds), + MAX77650_LED_NUM_LEDS, GFP_KERNEL); + if (!leds) + return -ENOMEM; + + map = dev_get_regmap(dev->parent, NULL); + if (!map) + return -ENODEV; + + num_leds = of_get_child_count(of_node); + if (!num_leds || num_leds > MAX77650_LED_NUM_LEDS) + return -ENODEV; + + for_each_child_of_node(of_node, child) { + rv = of_property_read_u32(child, "reg", ®); + if (rv || reg >= MAX77650_LED_NUM_LEDS) + return -EINVAL; + + led = &leds[reg]; + led->map = map; + led->regA = MAX77650_LED_A_BASE + reg; + led->regB = MAX77650_LED_B_BASE + reg; + led->cdev.brightness_set_blocking = max77650_led_brightness_set; + led->cdev.max_brightness = MAX77650_LED_MAX_BRIGHTNESS; + + label = of_get_property(child, "label", NULL); + if (!label) { + led->cdev.name = "max77650::"; + } else { + led->cdev.name = devm_kasprintf(dev, GFP_KERNEL, + "max77650:%s", label); + if (!led->cdev.name) + return -ENOMEM; + } + + of_property_read_string(child, "linux,default-trigger", + &led->cdev.default_trigger); + + rv = devm_of_led_classdev_register(dev, child, &led->cdev); + if (rv) + return rv; + + rv = regmap_write(map, led->regA, MAX77650_LED_A_DEFAULT); + if (rv) + return rv; + + rv = regmap_write(map, led->regB, MAX77650_LED_B_DEFAULT); + if (rv) + return rv; + } + + return regmap_write(map, + MAX77650_REG_CNFG_LED_TOP, + MAX77650_LED_TOP_DEFAULT); +} + +static struct platform_driver max77650_led_driver = { + .driver = { + .name = "max77650-led", + }, + .probe = max77650_led_probe, +}; +module_platform_driver(max77650_led_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 LED driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 26ad6468d13a..0f394f08db6f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -733,6 +733,20 @@ config MFD_MAX77620 provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77650 + tristate "Maxim MAX77650/77651 PMIC Support" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Say Y here to add support for Maxim Semiconductor MAX77650 and + MAX77651 Power Management ICs. This is the core multifunction + driver for interacting with the device. The module name is + 'max77650'. Additional drivers can be enabled in order to use + the following functionalities of the device: GPIO, regulator, + charger, LED, onkey. + config MFD_MAX77686 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b4569ed7f3f3..5727d099c16f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77620) += max77620.o +obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX77843) += max77843.o diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c new file mode 100644 index 000000000000..60e07aca6ae5 --- /dev/null +++ b/drivers/mfd/max77650.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// Core MFD driver for MAXIM 77650/77651 charger/power-supply. +// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#define MAX77650_INT_GPI_F_MSK BIT(0) +#define MAX77650_INT_GPI_R_MSK BIT(1) +#define MAX77650_INT_GPI_MSK \ + (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK) +#define MAX77650_INT_nEN_F_MSK BIT(2) +#define MAX77650_INT_nEN_R_MSK BIT(3) +#define MAX77650_INT_TJAL1_R_MSK BIT(4) +#define MAX77650_INT_TJAL2_R_MSK BIT(5) +#define MAX77650_INT_DOD_R_MSK BIT(6) + +#define MAX77650_INT_THM_MSK BIT(0) +#define MAX77650_INT_CHG_MSK BIT(1) +#define MAX77650_INT_CHGIN_MSK BIT(2) +#define MAX77650_INT_TJ_REG_MSK BIT(3) +#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4) +#define MAX77650_INT_SYS_CTRL_MSK BIT(5) +#define MAX77650_INT_SYS_CNFG_MSK BIT(6) + +#define MAX77650_INT_GLBL_OFFSET 0 +#define MAX77650_INT_CHG_OFFSET 1 + +#define MAX77650_SBIA_LPM_MASK BIT(5) +#define MAX77650_SBIA_LPM_DISABLED 0x00 + +enum { + MAX77650_INT_GPI, + MAX77650_INT_nEN_F, + MAX77650_INT_nEN_R, + MAX77650_INT_TJAL1_R, + MAX77650_INT_TJAL2_R, + MAX77650_INT_DOD_R, + MAX77650_INT_THM, + MAX77650_INT_CHG, + MAX77650_INT_CHGIN, + MAX77650_INT_TJ_REG, + MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_SYS_CTRL, + MAX77650_INT_SYS_CNFG, +}; + +static const struct resource max77650_charger_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"), +}; + +static const struct resource max77650_gpio_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"), +}; + +static const struct resource max77650_onkey_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"), +}; + +static const struct mfd_cell max77650_cells[] = { + { + .name = "max77650-regulator", + .of_compatible = "maxim,max77650-regulator", + }, { + .name = "max77650-charger", + .of_compatible = "maxim,max77650-charger", + .resources = max77650_charger_resources, + .num_resources = ARRAY_SIZE(max77650_charger_resources), + }, { + .name = "max77650-gpio", + .of_compatible = "maxim,max77650-gpio", + .resources = max77650_gpio_resources, + .num_resources = ARRAY_SIZE(max77650_gpio_resources), + }, { + .name = "max77650-led", + .of_compatible = "maxim,max77650-led", + }, { + .name = "max77650-onkey", + .of_compatible = "maxim,max77650-onkey", + .resources = max77650_onkey_resources, + .num_resources = ARRAY_SIZE(max77650_onkey_resources), + }, +}; + +static const struct regmap_irq max77650_irqs[] = { + [MAX77650_INT_GPI] = { + .reg_offset = MAX77650_INT_GLBL_OFFSET, + .mask = MAX77650_INT_GPI_MSK, + .type = { + .type_falling_val = MAX77650_INT_GPI_F_MSK, + .type_rising_val = MAX77650_INT_GPI_R_MSK, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, + }, + REGMAP_IRQ_REG(MAX77650_INT_nEN_F, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK), + REGMAP_IRQ_REG(MAX77650_INT_nEN_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_DOD_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_THM, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJ_REG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK), +}; + +static const struct regmap_irq_chip max77650_irq_chip = { + .name = "max77650-irq", + .irqs = max77650_irqs, + .num_irqs = ARRAY_SIZE(max77650_irqs), + .num_regs = 2, + .status_base = MAX77650_REG_INT_GLBL, + .mask_base = MAX77650_REG_INTM_GLBL, + .type_in_mask = true, + .type_invert = true, + .init_ack_masked = true, + .clear_on_unmask = true, +}; + +static const struct regmap_config max77650_regmap_config = { + .name = "max77650", + .reg_bits = 8, + .val_bits = 8, +}; + +static int max77650_i2c_probe(struct i2c_client *i2c) +{ + struct regmap_irq_chip_data *irq_data; + struct device *dev = &i2c->dev; + struct irq_domain *domain; + struct regmap *map; + unsigned int val; + int rv, id; + + map = devm_regmap_init_i2c(i2c, &max77650_regmap_config); + if (IS_ERR(map)) { + dev_err(dev, "Unable to initialise I2C Regmap\n"); + return PTR_ERR(map); + } + + rv = regmap_read(map, MAX77650_REG_CID, &val); + if (rv) { + dev_err(dev, "Unable to read Chip ID\n"); + return rv; + } + + id = MAX77650_CID_BITS(val); + switch (id) { + case MAX77650_CID_77650A: + case MAX77650_CID_77650C: + case MAX77650_CID_77651A: + case MAX77650_CID_77651B: + break; + default: + dev_err(dev, "Chip not supported - ID: 0x%02x\n", id); + return -ENODEV; + } + + /* + * This IC has a low-power mode which reduces the quiescent current + * consumption to ~5.6uA but is only suitable for systems consuming + * less than ~2mA. Since this is not likely the case even on + * linux-based wearables - keep the chip in normal power mode. + */ + rv = regmap_update_bits(map, + MAX77650_REG_CNFG_GLBL, + MAX77650_SBIA_LPM_MASK, + MAX77650_SBIA_LPM_DISABLED); + if (rv) { + dev_err(dev, "Unable to change the power mode\n"); + return rv; + } + + rv = devm_regmap_add_irq_chip(dev, map, i2c->irq, + IRQF_ONESHOT | IRQF_SHARED, 0, + &max77650_irq_chip, &irq_data); + if (rv) { + dev_err(dev, "Unable to add Regmap IRQ chip\n"); + return rv; + } + + domain = regmap_irq_get_domain(irq_data); + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max77650_cells, ARRAY_SIZE(max77650_cells), + NULL, 0, domain); +} + +static const struct of_device_id max77650_of_match[] = { + { .compatible = "maxim,max77650" }, + { } +}; +MODULE_DEVICE_TABLE(of, max77650_of_match); + +static struct i2c_driver max77650_i2c_driver = { + .driver = { + .name = "max77650", + .of_match_table = of_match_ptr(max77650_of_match), + }, + .probe_new = max77650_i2c_probe, +}; +module_i2c_driver(max77650_i2c_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 94e3f32ce935..1ade4c8cc91f 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -269,6 +269,19 @@ fail_alloc: return ret; } +/** + * mfd_add_devices - register child devices + * + * @parent: Pointer to parent device. + * @id: Can be PLATFORM_DEVID_AUTO to let the Platform API take care + * of device numbering, or will be added to a device's cell_id. + * @cells: Array of (struct mfd_cell)s describing child devices. + * @n_devs: Number of child devices to register. + * @mem_base: Parent register range resource for child devices. + * @irq_base: Base of the range of virtual interrupt numbers allocated for + * this MFD device. Unused if @domain is specified. + * @domain: Interrupt domain to create mappings for hardware interrupts. + */ int mfd_add_devices(struct device *parent, int id, const struct mfd_cell *cells, int n_devs, struct resource *mem_base, diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index e901b9879e7e..0230c96fa94d 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -499,6 +499,13 @@ config CHARGER_DETECTOR_MAX14656 Revision 1.2 and can be found e.g. in Kindle 4/5th generation readers and certain LG devices. +config CHARGER_MAX77650 + tristate "Maxim MAX77650 battery charger driver" + depends on MFD_MAX77650 + help + Say Y to enable support for the battery charger control of MAX77650 + PMICs. + config CHARGER_MAX77693 tristate "Maxim MAX77693 battery charger driver" depends on MFD_MAX77693 diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index b731c2a9b695..b73eb8c5c1a9 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o obj-$(CONFIG_CHARGER_LTC3651) += ltc3651-charger.o obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o +obj-$(CONFIG_CHARGER_MAX77650) += max77650-charger.o obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o diff --git a/drivers/power/supply/max77650-charger.c b/drivers/power/supply/max77650-charger.c new file mode 100644 index 000000000000..e34714cb05ec --- /dev/null +++ b/drivers/power/supply/max77650-charger.c @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// Battery charger driver for MAXIM 77650/77651 charger/power-supply. + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/regmap.h> + +#define MAX77650_CHARGER_ENABLED BIT(0) +#define MAX77650_CHARGER_DISABLED 0x00 +#define MAX77650_CHARGER_CHG_EN_MASK BIT(0) + +#define MAX77650_CHG_DETAILS_MASK GENMASK(7, 4) +#define MAX77650_CHG_DETAILS_BITS(_reg) \ + (((_reg) & MAX77650_CHG_DETAILS_MASK) >> 4) + +/* Charger is OFF. */ +#define MAX77650_CHG_OFF 0x00 +/* Charger is in prequalification mode. */ +#define MAX77650_CHG_PREQ 0x01 +/* Charger is in fast-charge constant current mode. */ +#define MAX77650_CHG_ON_CURR 0x02 +/* Charger is in JEITA modified fast-charge constant-current mode. */ +#define MAX77650_CHG_ON_CURR_JEITA 0x03 +/* Charger is in fast-charge constant-voltage mode. */ +#define MAX77650_CHG_ON_VOLT 0x04 +/* Charger is in JEITA modified fast-charge constant-voltage mode. */ +#define MAX77650_CHG_ON_VOLT_JEITA 0x05 +/* Charger is in top-off mode. */ +#define MAX77650_CHG_ON_TOPOFF 0x06 +/* Charger is in JEITA modified top-off mode. */ +#define MAX77650_CHG_ON_TOPOFF_JEITA 0x07 +/* Charger is done. */ +#define MAX77650_CHG_DONE 0x08 +/* Charger is JEITA modified done. */ +#define MAX77650_CHG_DONE_JEITA 0x09 +/* Charger is suspended due to a prequalification timer fault. */ +#define MAX77650_CHG_SUSP_PREQ_TIM_FAULT 0x0a +/* Charger is suspended due to a fast-charge timer fault. */ +#define MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT 0x0b +/* Charger is suspended due to a battery temperature fault. */ +#define MAX77650_CHG_SUSP_BATT_TEMP_FAULT 0x0c + +#define MAX77650_CHGIN_DETAILS_MASK GENMASK(3, 2) +#define MAX77650_CHGIN_DETAILS_BITS(_reg) \ + (((_reg) & MAX77650_CHGIN_DETAILS_MASK) >> 2) + +#define MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT 0x00 +#define MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT 0x01 +#define MAX77650_CHGIN_OKAY 0x11 + +#define MAX77650_CHARGER_CHG_MASK BIT(1) +#define MAX77650_CHARGER_CHG_CHARGING(_reg) \ + (((_reg) & MAX77650_CHARGER_CHG_MASK) > 1) + +#define MAX77650_CHARGER_VCHGIN_MIN_MASK 0xc0 +#define MAX77650_CHARGER_VCHGIN_MIN_SHIFT(_val) ((_val) << 5) + +#define MAX77650_CHARGER_ICHGIN_LIM_MASK 0x1c +#define MAX77650_CHARGER_ICHGIN_LIM_SHIFT(_val) ((_val) << 2) + +struct max77650_charger_data { + struct regmap *map; + struct device *dev; +}; + +static enum power_supply_property max77650_charger_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_CHARGE_TYPE +}; + +static const unsigned int max77650_charger_vchgin_min_table[] = { + 4000000, 4100000, 4200000, 4300000, 4400000, 4500000, 4600000, 4700000 +}; + +static const unsigned int max77650_charger_ichgin_lim_table[] = { + 95000, 190000, 285000, 380000, 475000 +}; + +static int max77650_charger_set_vchgin_min(struct max77650_charger_data *chg, + unsigned int val) +{ + int i, rv; + + for (i = 0; i < ARRAY_SIZE(max77650_charger_vchgin_min_table); i++) { + if (val == max77650_charger_vchgin_min_table[i]) { + rv = regmap_update_bits(chg->map, + MAX77650_REG_CNFG_CHG_B, + MAX77650_CHARGER_VCHGIN_MIN_MASK, + MAX77650_CHARGER_VCHGIN_MIN_SHIFT(i)); + if (rv) + return rv; + + return 0; + } + } + + return -EINVAL; +} + +static int max77650_charger_set_ichgin_lim(struct max77650_charger_data *chg, + unsigned int val) +{ + int i, rv; + + for (i = 0; i < ARRAY_SIZE(max77650_charger_ichgin_lim_table); i++) { + if (val == max77650_charger_ichgin_lim_table[i]) { + rv = regmap_update_bits(chg->map, + MAX77650_REG_CNFG_CHG_B, + MAX77650_CHARGER_ICHGIN_LIM_MASK, + MAX77650_CHARGER_ICHGIN_LIM_SHIFT(i)); + if (rv) + return rv; + + return 0; + } + } + + return -EINVAL; +} + +static int max77650_charger_enable(struct max77650_charger_data *chg) +{ + int rv; + + rv = regmap_update_bits(chg->map, + MAX77650_REG_CNFG_CHG_B, + MAX77650_CHARGER_CHG_EN_MASK, + MAX77650_CHARGER_ENABLED); + if (rv) + dev_err(chg->dev, "unable to enable the charger: %d\n", rv); + + return rv; +} + +static int max77650_charger_disable(struct max77650_charger_data *chg) +{ + int rv; + + rv = regmap_update_bits(chg->map, + MAX77650_REG_CNFG_CHG_B, + MAX77650_CHARGER_CHG_EN_MASK, + MAX77650_CHARGER_DISABLED); + if (rv) + dev_err(chg->dev, "unable to disable the charger: %d\n", rv); + + return rv; +} + +static irqreturn_t max77650_charger_check_status(int irq, void *data) +{ + struct max77650_charger_data *chg = data; + int rv, reg; + + rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, ®); + if (rv) { + dev_err(chg->dev, + "unable to read the charger status: %d\n", rv); + return IRQ_HANDLED; + } + + switch (MAX77650_CHGIN_DETAILS_BITS(reg)) { + case MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT: + dev_err(chg->dev, "undervoltage lockout detected, disabling charger\n"); + max77650_charger_disable(chg); + break; + case MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT: + dev_err(chg->dev, "overvoltage lockout detected, disabling charger\n"); + max77650_charger_disable(chg); + break; + case MAX77650_CHGIN_OKAY: + max77650_charger_enable(chg); + break; + default: + /* May be 0x10 - debouncing */ + break; + } + + return IRQ_HANDLED; +} + +static int max77650_charger_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max77650_charger_data *chg = power_supply_get_drvdata(psy); + int rv, reg; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, ®); + if (rv) + return rv; + + if (MAX77650_CHARGER_CHG_CHARGING(reg)) { + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + } + + switch (MAX77650_CHG_DETAILS_BITS(reg)) { + case MAX77650_CHG_OFF: + case MAX77650_CHG_SUSP_PREQ_TIM_FAULT: + case MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT: + case MAX77650_CHG_SUSP_BATT_TEMP_FAULT: + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case MAX77650_CHG_PREQ: + case MAX77650_CHG_ON_CURR: + case MAX77650_CHG_ON_CURR_JEITA: + case MAX77650_CHG_ON_VOLT: + case MAX77650_CHG_ON_VOLT_JEITA: + case MAX77650_CHG_ON_TOPOFF: + case MAX77650_CHG_ON_TOPOFF_JEITA: + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + case MAX77650_CHG_DONE: + val->intval = POWER_SUPPLY_STATUS_FULL; + break; + default: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + } + break; + case POWER_SUPPLY_PROP_ONLINE: + rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, ®); + if (rv) + return rv; + + val->intval = MAX77650_CHARGER_CHG_CHARGING(reg); + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, ®); + if (rv) + return rv; + + if (!MAX77650_CHARGER_CHG_CHARGING(reg)) { + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + + switch (MAX77650_CHG_DETAILS_BITS(reg)) { + case MAX77650_CHG_PREQ: + case MAX77650_CHG_ON_CURR: + case MAX77650_CHG_ON_CURR_JEITA: + case MAX77650_CHG_ON_VOLT: + case MAX77650_CHG_ON_VOLT_JEITA: + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + case MAX77650_CHG_ON_TOPOFF: + case MAX77650_CHG_ON_TOPOFF_JEITA: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + default: + val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct power_supply_desc max77650_battery_desc = { + .name = "max77650", + .type = POWER_SUPPLY_TYPE_USB, + .get_property = max77650_charger_get_property, + .properties = max77650_charger_properties, + .num_properties = ARRAY_SIZE(max77650_charger_properties), +}; + +static int max77650_charger_probe(struct platform_device *pdev) +{ + struct power_supply_config pscfg = {}; + struct max77650_charger_data *chg; + struct power_supply *battery; + struct device *dev, *parent; + int rv, chg_irq, chgin_irq; + unsigned int prop; + + dev = &pdev->dev; + parent = dev->parent; + + chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL); + if (!chg) + return -ENOMEM; + + platform_set_drvdata(pdev, chg); + + chg->map = dev_get_regmap(parent, NULL); + if (!chg->map) + return -ENODEV; + + chg->dev = dev; + + pscfg.of_node = dev->of_node; + pscfg.drv_data = chg; + + chg_irq = platform_get_irq_byname(pdev, "CHG"); + if (chg_irq < 0) + return chg_irq; + + chgin_irq = platform_get_irq_byname(pdev, "CHGIN"); + if (chgin_irq < 0) + return chgin_irq; + + rv = devm_request_any_context_irq(dev, chg_irq, + max77650_charger_check_status, + IRQF_ONESHOT, "chg", chg); + if (rv < 0) + return rv; + + rv = devm_request_any_context_irq(dev, chgin_irq, + max77650_charger_check_status, + IRQF_ONESHOT, "chgin", chg); + if (rv < 0) + return rv; + + battery = devm_power_supply_register(dev, + &max77650_battery_desc, &pscfg); + if (IS_ERR(battery)) + return PTR_ERR(battery); + + rv = of_property_read_u32(dev->of_node, + "input-voltage-min-microvolt", &prop); + if (rv == 0) { + rv = max77650_charger_set_vchgin_min(chg, prop); + if (rv) + return rv; + } + + rv = of_property_read_u32(dev->of_node, + "input-current-limit-microamp", &prop); + if (rv == 0) { + rv = max77650_charger_set_ichgin_lim(chg, prop); + if (rv) + return rv; + } + + return max77650_charger_enable(chg); +} + +static int max77650_charger_remove(struct platform_device *pdev) +{ + struct max77650_charger_data *chg = platform_get_drvdata(pdev); + + return max77650_charger_disable(chg); +} + +static struct platform_driver max77650_charger_driver = { + .driver = { + .name = "max77650-charger", + }, + .probe = max77650_charger_probe, + .remove = max77650_charger_remove, +}; +module_platform_driver(max77650_charger_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 charger driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); |