mfd: Add STMPE1600 support

STMPE1600 is a 16-bit port expander.
Datasheet is available here :
http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/
i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html

Signed-off-by: Amelie DELAUNAY <amelie.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

3 files changed, 83 insertions, 5 deletions

diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
index c3f4aab53b07..863c39a3353c 100644
--- a/drivers/mfd/stmpe-i2c.c
+++ b/drivers/mfd/stmpe-i2c.c
@@ -57,6 +57,7 @@ static const struct of_device_id stmpe_of_match[] = {
 	{ .compatible = "st,stmpe610", .data = (void *)STMPE610, },
 	{ .compatible = "st,stmpe801", .data = (void *)STMPE801, },
 	{ .compatible = "st,stmpe811", .data = (void *)STMPE811, },
+	{ .compatible = "st,stmpe1600", .data = (void *)STMPE1600, },
 	{ .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
 	{ .compatible = "st,stmpe1801", .data = (void *)STMPE1801, },
 	{ .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
@@ -101,6 +102,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
 	{ "stmpe610", STMPE610 },
 	{ "stmpe801", STMPE801 },
 	{ "stmpe811", STMPE811 },
+	{ "stmpe1600", STMPE1600 },
 	{ "stmpe1601", STMPE1601 },
 	{ "stmpe1801", STMPE1801 },
 	{ "stmpe2401", STMPE2401 },
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 1877d1ea2e7c..cfdae8a3d779 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -553,6 +553,59 @@ static struct stmpe_variant_info stmpe610 = {
 };
 
 /*
+ * STMPE1600
+ * Compared to all others STMPE variant, LSB and MSB regs are located in this
+ * order :	LSB   addr
+ *		MSB   addr + 1
+ * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers
+ */
+
+static const u8 stmpe1600_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1600_REG_CHIP_ID,
+	[STMPE_IDX_SYS_CTRL]	= STMPE1600_REG_SYS_CTRL,
+	[STMPE_IDX_ICR_LSB]	= STMPE1600_REG_SYS_CTRL,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1600_REG_GPMR_LSB,
+	[STMPE_IDX_GPMR_CSB]	= STMPE1600_REG_GPMR_MSB,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1600_REG_GPSR_LSB,
+	[STMPE_IDX_GPSR_CSB]	= STMPE1600_REG_GPSR_MSB,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1600_REG_GPDR_LSB,
+	[STMPE_IDX_GPDR_CSB]	= STMPE1600_REG_GPDR_MSB,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1600_REG_IEGPIOR_LSB,
+	[STMPE_IDX_IEGPIOR_CSB]	= STMPE1600_REG_IEGPIOR_MSB,
+	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1600_REG_ISGPIOR_LSB,
+};
+
+static struct stmpe_variant_block stmpe1600_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= 0,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+};
+
+static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks,
+			   bool enable)
+{
+	if (blocks & STMPE_BLOCK_GPIO)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static struct stmpe_variant_info stmpe1600 = {
+	.name		= "stmpe1600",
+	.id_val		= STMPE1600_ID,
+	.id_mask	= 0xffff,
+	.num_gpios	= 16,
+	.af_bits	= 0,
+	.regs		= stmpe1600_regs,
+	.blocks		= stmpe1600_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1600_blocks),
+	.num_irqs	= STMPE1600_NR_INTERNAL_IRQS,
+	.enable		= stmpe1600_enable,
+};
+
+/*
  * STMPE1601
  */
 
@@ -949,6 +1002,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
 	[STMPE610]	= &stmpe610,
 	[STMPE801]	= &stmpe801,
 	[STMPE811]	= &stmpe811,
+	[STMPE1600]	= &stmpe1600,
 	[STMPE1601]	= &stmpe1601,
 	[STMPE1801]	= &stmpe1801,
 	[STMPE2401]	= &stmpe2401,
@@ -975,7 +1029,8 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 	int ret;
 	int i;
 
-	if (variant->id_val == STMPE801_ID) {
+	if (variant->id_val == STMPE801_ID ||
+	    variant->id_val == STMPE1600_ID) {
 		int base = irq_create_mapping(stmpe->domain, 0);
 
 		handle_nested_irq(base);
@@ -1149,13 +1204,13 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 		return ret;
 
 	if (stmpe->irq >= 0) {
-		if (id == STMPE801_ID)
+		if (id == STMPE801_ID || id == STMPE1600_ID)
 			icr = STMPE_SYS_CTRL_INT_EN;
 		else
 			icr = STMPE_ICR_LSB_GIM;
 
-		/* STMPE801 doesn't support Edge interrupts */
-		if (id != STMPE801_ID) {
+		/* STMPE801 and STMPE1600 don't support Edge interrupts */
+		if (id != STMPE801_ID && id != STMPE1600_ID) {
 			if (irq_trigger == IRQF_TRIGGER_FALLING ||
 					irq_trigger == IRQF_TRIGGER_RISING)
 				icr |= STMPE_ICR_LSB_EDGE;
@@ -1163,7 +1218,7 @@ static int stmpe_chip_init(struct stmpe *stmpe)
 
 		if (irq_trigger == IRQF_TRIGGER_RISING ||
 				irq_trigger == IRQF_TRIGGER_HIGH) {
-			if (id == STMPE801_ID)
+			if (id == STMPE801_ID || id == STMPE1600_ID)
 				icr |= STMPE_SYS_CTRL_INT_HI;
 			else
 				icr |= STMPE_ICR_LSB_HIGH;
diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index f1273420c8e8..f7efdd8a5fc6 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -164,6 +164,27 @@ int stmpe_remove(struct stmpe *stmpe);
 #define STMPE811_SYS_CTRL2_TS_OFF	(1 << 3)
 
 /*
+ * STMPE1600
+ */
+#define STMPE1600_ID			0x0016
+#define STMPE1600_NR_INTERNAL_IRQS	16
+
+#define STMPE1600_REG_CHIP_ID		0x00
+#define STMPE1600_REG_SYS_CTRL		0x03
+#define STMPE1600_REG_IEGPIOR_LSB	0x08
+#define STMPE1600_REG_IEGPIOR_MSB	0x09
+#define STMPE1600_REG_ISGPIOR_LSB	0x0A
+#define STMPE1600_REG_ISGPIOR_MSB	0x0B
+#define STMPE1600_REG_GPMR_LSB		0x10
+#define STMPE1600_REG_GPMR_MSB		0x11
+#define STMPE1600_REG_GPSR_LSB		0x12
+#define STMPE1600_REG_GPSR_MSB		0x13
+#define STMPE1600_REG_GPDR_LSB		0x14
+#define STMPE1600_REG_GPDR_MSB		0x15
+#define STMPE1600_REG_GPPIR_LSB		0x16
+#define STMPE1600_REG_GPPIR_MSB		0x17
+
+/*
  * STMPE1601
  */