diff options
| author | Kai-Heng Feng <kai.heng.feng@canonical.com> | 2020-07-24 01:29:10 +0800 |
|---|---|---|
| committer | Christoph Hellwig <hch@lst.de> | 2020-07-26 17:28:19 +0200 |
| commit | 5611ec2b9814bc91f7b0a8d804c1fc152e2025d9 (patch) | |
| tree | 4da85d6fa716eba1924c308bbb5accb4dcdfdc05 /drivers | |
| parent | adc99fd378398f4c58798a1c57889872967d56a6 (diff) | |
nvme-pci: prevent SK hynix PC400 from using Write Zeroes command
After commit 6e02318eaea5 ("nvme: add support for the Write Zeroes
command"), SK hynix PC400 becomes very slow with the following error
message:
[ 224.567695] blk_update_request: operation not supported error, dev nvme1n1, sector 499384320 op 0x9:(WRITE_ZEROES) flags 0x1000000 phys_seg 0 prio class 0]
SK Hynix PC400 has a buggy firmware that treats NLB as max value instead
of a range, so the NLB passed isn't a valid value to the firmware.
According to SK hynix there are three commands are affected:
- Write Zeroes
- Compare
- Write Uncorrectable
Right now only Write Zeroes is implemented, so disable it completely on
SK hynix PC400.
BugLink: https://bugs.launchpad.net/bugs/1872383
Cc: kyounghwan sohn <kyounghwan.sohn@sk.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/nvme/host/pci.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index b1d18f0633c7..25a187e43dbe 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -3122,6 +3122,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_DEVICE(0x1cc1, 0x8201), /* ADATA SX8200PNP 512GB */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_IGNORE_DEV_SUBNQN, }, + { PCI_DEVICE(0x1c5c, 0x1504), /* SK Hynix PC400 */ + .driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, }, { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) }, { PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001), .driver_data = NVME_QUIRK_SINGLE_VECTOR }, |