diff options
| author | Peter Hurley <peter@hurleysoftware.com> | 2014-12-31 16:32:49 -0500 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-01-09 14:10:46 -0800 |
| commit | 3e29af27c4686d9cb401a63c7eeb6376662b13c1 (patch) | |
| tree | 8e956bb23cf62dd34bb22ba35ad4a0238e82060d /drivers | |
| parent | 4bf4ea9dca4ba1984abeb592f429265b9bacac42 (diff) | |
serial: omap_8250: Fix RTS handling, part B
Because the OMAP3 UART ignores MCR[1] (RTS) in autoRTS mode, autoRTS
mode must not be enabled unless RTS is set (or port->mctrl & TIOCM_RTS,
which is equivalent).
Fixes premature raising of RTS in omap_8250_set_termios() -- RTS was
raised even before UART mode was selected.
Fixes raise of RTS after port has been shutdown; omap_8250_pm() re-enabled
RTS after omap_8250_shutdown().
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 15 |
1 files changed, 9 insertions, 6 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 227033db214b..7c485eaf7dd1 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -272,7 +272,10 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_dl_write(up, priv->quot); - serial_out(up, UART_EFR, priv->efr); + if (up->port.mctrl & TIOCM_RTS) + serial_out(up, UART_EFR, priv->efr); + else + serial_out(up, UART_EFR, priv->efr & ~UART_EFR_RTS); /* Configure flow control */ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -468,18 +471,18 @@ static void omap_8250_set_termios(struct uart_port *port, static void omap_8250_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - struct omap8250_priv *priv = up->port.private_data; + struct uart_8250_port *up = up_to_u8250p(port); + u8 efr; pm_runtime_get_sync(port->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, priv->efr | UART_EFR_ECB); + efr = serial_in(up, UART_EFR); + serial_out(up, UART_EFR, efr | UART_EFR_ECB); serial_out(up, UART_LCR, 0); serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_EFR, priv->efr); + serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); pm_runtime_mark_last_busy(port->dev); |