diff options
| author | Nicolas Ferre <nicolas.ferre@atmel.com> | 2008-04-28 02:15:21 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-28 08:58:39 -0700 |
| commit | fd0858017eb67aa0d41dd4e8499ca6a7bfb63941 (patch) | |
| tree | 782b525181b6cd2f10b4f1307e93a8716c783dd4 /drivers/video | |
| parent | cf19a37e0641d975d271a5a30f097dd6b96d232f (diff) | |
atmel_lcdfb: wiring BGR to RGB color mode
Adds different wiring mode for the LCD screen.
The legacy atmel LCDC IP uses a non standard color mode, "BGR-555.1" instead
"RGB-565". The major part of graphic stacks for embedded systems uses only
"RGB-565". It is possible to swap LCD IOs instead of doing this bit swapping
by software (See application note AT91SAM9 LCD Controller
http://www.atmel.com/dyn/resources/prod_documents/doc6300.pdf)
This wire swapping is done on the at91sam9rl-ek board (board code
using this patch will come later).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/atmel_lcdfb.c | 27 |
1 files changed, 22 insertions, 5 deletions
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 6fcf76c12910..5a31a7a40cd4 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -338,19 +338,35 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, break; case 15: case 16: - var->red.offset = 0; + if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { + /* RGB:565 mode */ + var->red.offset = 11; + var->blue.offset = 0; + var->green.length = 6; + } else { + /* BGR:555 mode */ + var->red.offset = 0; + var->blue.offset = 10; + var->green.length = 5; + } var->green.offset = 5; - var->blue.offset = 10; - var->red.length = var->green.length = var->blue.length = 5; + var->red.length = var->blue.length = 5; break; case 32: var->transp.offset = 24; var->transp.length = 8; /* fall through */ case 24: - var->red.offset = 0; + if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { + /* RGB:888 mode */ + var->red.offset = 16; + var->blue.offset = 0; + } else { + /* BGR:888 mode */ + var->red.offset = 0; + var->blue.offset = 16; + } var->green.offset = 8; - var->blue.offset = 16; var->red.length = var->green.length = var->blue.length = 8; break; default: @@ -697,6 +713,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev) sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control; sinfo->guard_time = pdata_sinfo->guard_time; sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight; + sinfo->lcd_wiring_mode = pdata_sinfo->lcd_wiring_mode; } else { dev_err(dev, "cannot get default configuration\n"); goto free_info; |