[PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon

According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant.  The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit.  And because soft_cursor is an fbcon-specific hook, the file is
moved to the console directory.

Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank.  For drivers that do, they can fill up this field with their own
version.

The end result is a smaller code size.  And if the framebuffer console is not
loaded, module/kernel size is also reduced because the soft_cursor module will
also not be loaded.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 79 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9c54695911c1..44b6ca290ce3 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -65,15 +65,6 @@ config FB_CFB_IMAGEBLIT
 	  blitting. This is used by drivers that don't provide their own
 	  (accelerated) version.
 
-config FB_SOFT_CURSOR
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the soft_cursor function for generic software cursor support.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version.
-
 config FB_MACMODES
        tristate
        depends on FB
@@ -114,7 +105,6 @@ config FB_CIRRUS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  This enables support for Cirrus Logic GD542x/543x based boards on
 	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -133,7 +123,6 @@ config FB_PM2
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the Permedia2 AGP frame
 	  buffer card from ASK, aka `Graphic Blaster Exxtreme'.  There is a
@@ -152,7 +141,6 @@ config FB_ARMCLCD
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This framebuffer device driver is for the ARM PrimeCell PL110
 	  Colour LCD controller.  ARM PrimeCells provide the building
@@ -169,7 +157,6 @@ config FB_ACORN
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the Acorn VIDC graphics
 	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
@@ -181,7 +168,6 @@ config FB_CLPS711X
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Say Y to enable the Framebuffer driver for the CLPS7111 and
 	  EP7212 processors.
@@ -192,7 +178,6 @@ config FB_SA1100
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is a framebuffer device for the SA-1100 LCD Controller.
 	  See <http://www.linux-fbdev.org/> for information on framebuffer
@@ -207,7 +192,6 @@ config FB_IMX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 
 config FB_CYBER2000
 	tristate "CyberPro 2000/2010/5000 support"
@@ -215,7 +199,6 @@ config FB_CYBER2000
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This enables support for the Integraphics CyberPro 20x0 and 5000
 	  VGA chips used in the Rebel.com Netwinder and other machines.
@@ -228,7 +211,6 @@ config FB_APOLLO
 	default y
 	select FB_CFB_FILLRECT
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 
 config FB_Q40
 	bool
@@ -237,12 +219,10 @@ config FB_Q40
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 
 config FB_AMIGA
 	tristate "Amiga native chipset support"
 	depends on FB && AMIGA
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the builtin graphics
 	  chipset found in Amigas.
@@ -282,7 +262,6 @@ config FB_CYBER
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This enables support for the Cybervision 64 graphics card from
 	  Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -297,7 +276,6 @@ config FB_VIRGE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This enables support for the Cybervision 64/3D graphics card from
 	  Phase5. Please note that its use is not all that intuitive (i.e. if
@@ -320,7 +298,6 @@ config FB_FM2
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the Amiga FrameMaster
 	  card from BSC (exhibited 1992 but not shipped as a CBM product).
@@ -331,7 +308,6 @@ config FB_ARC
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This enables support for the Arc Monochrome LCD board. The board
 	  is based on the KS-108 lcd controller and is typically a matrix
@@ -354,7 +330,6 @@ config FB_OF
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES
 	help
 	  Say Y if you want support with Open Firmware for your graphics
@@ -366,7 +341,6 @@ config FB_CONTROL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES
 	help
 	  This driver supports a frame buffer for the graphics adapter in the
@@ -378,7 +352,6 @@ config FB_PLATINUM
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES
 	help
 	  This driver supports a frame buffer for the "platinum" graphics
@@ -390,7 +363,6 @@ config FB_VALKYRIE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES
 	help
 	  This driver supports a frame buffer for the "valkyrie" graphics
@@ -402,7 +374,6 @@ config FB_CT65550
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the Chips & Technologies
 	  65550 graphics chip in PowerBooks.
@@ -413,13 +384,11 @@ config FB_ASILIANT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 
 config FB_IMSTT
 	bool "IMS Twin Turbo display support"
 	depends on (FB = y) && PCI
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES if PPC
 	help
 	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
@@ -431,7 +400,6 @@ config FB_VGA16
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for VGA 16 color graphic
 	  cards. Say Y if you have such a card.
@@ -445,7 +413,6 @@ config FB_STI
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	default y
 	---help---
 	  STI refers to the HP "Standard Text Interface" which is a set of
@@ -466,7 +433,6 @@ config FB_MAC
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES
 
 #      bool '  Apple DAFB display support' CONFIG_FB_DAFB
@@ -475,7 +441,6 @@ config FB_HP300
 	depends on (FB = y) && HP300
 	select FB_CFB_FILLRECT
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	default y
 
 config FB_TGA
@@ -484,7 +449,6 @@ config FB_TGA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for generic TGA graphic
 	  cards. Say Y if you have one of those.
@@ -495,7 +459,6 @@ config FB_VESA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for generic VESA 2.0
 	  compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -513,7 +476,6 @@ config FB_HGA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Say Y here if you have a Hercules mono graphics card.
 
@@ -542,7 +504,6 @@ config FB_SGIVW
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  SGI Visual Workstation support for framebuffer graphics.
 
@@ -552,7 +513,6 @@ config FB_GBE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
  	help
 	  This is the frame buffer device driver for SGI Graphics Backend.
 	  This chip is used in SGI O2 and Visual Workstation 320/540.
@@ -580,7 +540,6 @@ config FB_BW2
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the BWtwo frame buffer.
 
@@ -589,7 +548,6 @@ config FB_CG3
 	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the CGthree frame buffer.
 
@@ -598,7 +556,6 @@ config FB_CG6
 	depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
 	  frame buffer.
@@ -609,7 +566,6 @@ config FB_PVR2
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
 	  run linux on your Dreamcast, you will have to say Y here.
@@ -631,7 +587,6 @@ config FB_EPSON1355
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Build in support for the SED1355 Epson Research Embedded RAMDAC
 	  LCD/CRT Controller (since redesignated as the S1D13505) as a
@@ -676,7 +631,6 @@ config FB_S1D13XXX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Support for S1D13XXX framebuffer device family (currently only
 	  working with S1D13806). Product specs at
@@ -691,7 +645,6 @@ config FB_NVIDIA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports graphics boards with the nVidia chips, TNT
 	  and newer. For very old chipsets, such as the RIVA128, then use
@@ -809,7 +762,6 @@ config FB_INTEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G chipsets.
@@ -832,7 +784,6 @@ config FB_MATROX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_TILEBLITTING
 	select FB_MACMODES if PPC_PMAC
 	---help---
@@ -973,7 +924,6 @@ config FB_RADEON_OLD
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES if PPC
 	help
 	  Choose this option if you want to use an ATI Radeon graphics card as
@@ -991,7 +941,6 @@ config FB_RADEON
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES if PPC_OF
 	help
 	  Choose this option if you want to use an ATI Radeon graphics card as
@@ -1029,7 +978,6 @@ config FB_ATY128
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES if PPC_PMAC
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
@@ -1045,7 +993,6 @@ config FB_ATY
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select FB_MACMODES if PPC
 	help
 	  This driver supports graphics boards with the ATI Mach64 chips.
@@ -1103,7 +1050,6 @@ config FB_SAVAGE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports notebooks and computers with S3 Savage PCI/AGP
 	  chips.
@@ -1140,7 +1086,6 @@ config FB_SIS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the SiS 300, 315, 330
 	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
@@ -1170,7 +1115,6 @@ config FB_NEOMAGIC
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports notebooks with NeoMagic PCI chips.
 	  Say Y if you have such a graphics card. 
@@ -1184,7 +1128,6 @@ config FB_KYRO
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
 	  graphics board.
@@ -1198,7 +1141,6 @@ config FB_3DFX
 	select FB_CFB_IMAGEBLIT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
-	select FB_SOFT_CURSOR
 	help
 	  This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
 	  chips. Say Y if you have such a graphics board.
@@ -1220,7 +1162,6 @@ config FB_VOODOO1
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
 	  Voodoo2 (cvg) based graphics card.
@@ -1237,7 +1178,6 @@ config FB_CYBLA
 	tristate "Cyberblade/i1 support"
 	depends on FB && PCI
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	select VIDEO_SELECT
 	---help---
 	  This driver is supposed to support the Trident Cyberblade/i1
@@ -1265,7 +1205,6 @@ config FB_TRIDENT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  This driver is supposed to support graphics boards with the
 	  Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
@@ -1314,7 +1253,6 @@ config FB_FFB
 	depends on FB_SBUS && SPARC64
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the Creator, Creator3D,
 	  and Elite3D graphics boards.
@@ -1325,7 +1263,6 @@ config FB_TCX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the TCX 24/8bit frame
 	  buffer.
@@ -1336,7 +1273,6 @@ config FB_CG14
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the CGfourteen frame
 	  buffer on Desktop SPARCsystems with the SX graphics option.
@@ -1347,7 +1283,6 @@ config FB_P9100
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the P9100 card
 	  supported on Sparcbook 3 machines.
@@ -1358,7 +1293,6 @@ config FB_LEO
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the SBUS-based Sun ZX
 	  (leo) frame buffer cards.
@@ -1373,7 +1307,6 @@ config FB_IGA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the framebuffer device for the INTERGRAPHICS 1680 and
 	  successor frame buffer cards.
@@ -1384,7 +1317,6 @@ config FB_HIT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  This is the frame buffer device driver for the Hitachi HD64461 LCD
 	  frame buffer card.
@@ -1395,7 +1327,6 @@ config FB_PMAG_AA
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
 	  used mainly in the MIPS-based DECstation series.
@@ -1406,7 +1337,6 @@ config FB_PMAG_BA
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
 	  used mainly in the MIPS-based DECstation series.
@@ -1417,7 +1347,6 @@ config FB_PMAGB_B
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
 	  in the MIPS-based DECstation series. The card is currently only
@@ -1429,7 +1358,6 @@ config FB_MAXINE
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Support for the onboard framebuffer (1024x768x8) in the Personal
 	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
@@ -1441,7 +1369,6 @@ config FB_TX3912
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
 	  see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
@@ -1454,7 +1381,6 @@ config FB_G364
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
 	  Olivetti M700-10 systems.
@@ -1465,7 +1391,6 @@ config FB_68328
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	help
 	  Say Y here if you want to support the built-in frame buffer of
 	  the Motorola 68328 CPU family.
@@ -1476,7 +1401,6 @@ config FB_PXA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  Frame buffer driver for the built-in LCD controller in the Intel
 	  PXA2x0 processor.
@@ -1511,7 +1435,6 @@ config FB_W100
  	select FB_CFB_FILLRECT
  	select FB_CFB_COPYAREA
  	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
 
@@ -1528,7 +1451,6 @@ config FB_S3C2410
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  Frame buffer driver for the built-in LCD controller in the Samsung
 	  S3C2410 processor.
@@ -1552,7 +1474,6 @@ config FB_VIRTUAL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select FB_SOFT_CURSOR
 	---help---
 	  This is a `virtual' frame buffer device. It operates on a chunk of
 	  unswappable kernel memory instead of on the memory of a graphics