diff options
author | Badhri Jagan Sridharan <badhri@google.com> | 2020-10-28 23:31:34 -0700 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-11-18 12:57:49 +0100 |
commit | 2fc58b36e919902ae2f17531783d8debadcc2a27 (patch) | |
tree | 55eac4b170f359410e97d84522b773b30832badd /drivers/usb/typec | |
parent | a57d253fc0582d223464705a5103cfb1930a06cd (diff) |
usb: typec: tcpci_maxim: Fix vbus stuck on upon diconnecting sink
Occasionally, POWER_STATUS.sourcing_vbus takes a while to clear after
writing to MAX_BUCK_BOOST_OP register. This causes vbus to turn back
on while disconnecting the sink. Overcome this issue by writing into
MAX_BUCK_BOOST_OP during frs while sourcing vbu, instead of always
into the register whenever POWER_STATUS.sourcing_vbus is set.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201029063138.1429760-7-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/typec')
-rw-r--r-- | drivers/usb/typec/tcpm/tcpci_maxim.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c index 723d7dd38f75..43dcad95e897 100644 --- a/drivers/usb/typec/tcpm/tcpci_maxim.c +++ b/drivers/usb/typec/tcpm/tcpci_maxim.c @@ -238,23 +238,22 @@ static void process_power_status(struct max_tcpci_chip *chip) if (ret < 0) return; - if (pwr_status == 0xff) { + if (pwr_status == 0xff) max_tcpci_init_regs(chip); - } else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS) { + else if (pwr_status & TCPC_POWER_STATUS_SOURCING_VBUS) tcpm_sourcing_vbus(chip->port); - /* - * Alawys re-enable boost here. - * In normal case, when say an headset is attached, TCPM would - * have instructed to TCPC to enable boost, so the call is a - * no-op. - * But for Fast Role Swap case, Boost turns on autonomously without - * AP intervention, but, needs AP to enable source mode explicitly - * for AP to regain control. - */ - max_tcpci_set_vbus(chip->tcpci, &chip->data, true, false); - } else { + else tcpm_vbus_change(chip->port); - } +} + +static void max_tcpci_frs_sourcing_vbus(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + /* + * For Fast Role Swap case, Boost turns on autonomously without + * AP intervention, but, needs AP to enable source mode explicitly + * for AP to regain control. + */ + max_tcpci_set_vbus(tcpci, tdata, true, false); } static void process_tx(struct max_tcpci_chip *chip, u16 status) @@ -441,6 +440,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id chip->data.start_drp_toggling = max_tcpci_start_toggling; chip->data.TX_BUF_BYTE_x_hidden = true; chip->data.init = tcpci_init; + chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus; max_tcpci_init_regs(chip); chip->tcpci = tcpci_register_port(chip->dev, &chip->data); |