Add missing newlines to some uses of dev_<level> messages

Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

6 files changed, 20 insertions, 20 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e4c248c98e84..65257867b34b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1071,7 +1071,7 @@ static ssize_t show_latency_timer(struct device *dev, struct device_attribute *a
 			     (char*) &latency, 1, WDR_TIMEOUT);
 
 	if (rv < 0) {
-		dev_err(dev, "Unable to read latency timer: %i", rv);
+		dev_err(dev, "Unable to read latency timer: %i\n", rv);
 		return -EIO;
 	}
 	return sprintf(buf, "%i\n", latency);
@@ -1098,7 +1098,7 @@ static ssize_t store_latency_timer(struct device *dev, struct device_attribute *
 			     buf, 0, WDR_TIMEOUT);
 
 	if (rv < 0) {
-		dev_err(dev, "Unable to write latency timer: %i", rv);
+		dev_err(dev, "Unable to write latency timer: %i\n", rv);
 		return -EIO;
 	}
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 2ecb1d2a034d..8dd3abc99d63 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2882,7 +2882,7 @@ static int edge_startup (struct usb_serial *serial)
 	    (edge_serial->product_info.NumPorts != serial->num_ports)) {
 		dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
 			 "vs. core thinking we have %d ports, email "
-			 "greg@kroah.com this information.",
+			 "greg@kroah.com this information.\n",
 			 edge_serial->product_info.NumPorts,
 			 serial->num_ports);
 	}
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 1b94daa61584..cbe5530f3db2 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -227,7 +227,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 100000);
 	if (result < 0)
-		dev_err(&port->dev, "Init of modem failed (error = %d)", result);
+		dev_err(&port->dev, "Init of modem failed (error = %d)\n", result);
 
 	/* reset the bulk pipes */
 	usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
@@ -255,7 +255,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 100000);
 	if (result < 0) 
-		dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
+		dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
 
 	/*--4: setup the initial flowcontrol */
 	dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
@@ -268,7 +268,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0x10,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
+		dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result);
 
 
 	/*--5: raise the dtr */
@@ -282,7 +282,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "setting dtr failed (error = %d)", result);
+		dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
 
 	/*--6: raise the rts */
 	dbg("%s:raising rts",__FUNCTION__);
@@ -295,7 +295,7 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "setting dtr failed (error = %d)", result);
+		dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
 	
 	kfree(buf_flow_init);
 	return 0;
@@ -322,7 +322,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
+		dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
 
 	/*--2: drop the rts */
 	dbg("%s:dropping rts",__FUNCTION__);
@@ -334,7 +334,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "dropping rts failed (error = %d)", result);
+		dev_err(&port->dev, "dropping rts failed (error = %d)\n", result);
 
 
 	/*--3: purge */
@@ -347,7 +347,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 0,
 				 200000);
 	if (result < 0)
-		dev_err(&port->dev, "purge failed (error = %d)", result);
+		dev_err(&port->dev, "purge failed (error = %d)\n", result);
 
 
 	/* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
@@ -361,7 +361,7 @@ static void ipw_close(struct usb_serial_port *port, struct file * filp)
 				 100000);
 
 	if (result < 0)
-		dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
+		dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result);
 
 	/* shutdown any in-flight urbs that we know about */
 	usb_kill_urb(port->read_urb);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 01e811becec4..e02c198016b0 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -478,7 +478,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
 		response = usb_submit_urb(port0->interrupt_in_urb, GFP_KERNEL);
 		if (response)
 			dev_err(&port->dev,
-				"%s - Error %d submitting control urb",
+				"%s - Error %d submitting control urb\n",
 				__FUNCTION__, response);
 	}
 
@@ -492,7 +492,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
 	response = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (response)
 		dev_err(&port->dev,
-			"%s - Error %d submitting read urb", __FUNCTION__, response);
+			"%s - Error %d submitting read urb\n", __FUNCTION__, response);
 
 	/* initialize our icount structure */
 	memset(&(mos7720_port->icount), 0x00, sizeof(mos7720_port->icount));
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index d19861166b50..eea226ae37bd 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -256,7 +256,7 @@ static void setup_line(struct work_struct *work)
 				100);
 
 	if (result != OTI6858_CTRL_PKT_SIZE) {
-		dev_err(&port->dev, "%s(): error reading status", __FUNCTION__);
+		dev_err(&port->dev, "%s(): error reading status\n", __FUNCTION__);
 		kfree(new_setup);
 		/* we will try again */
 		schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 0bb8de4cc524..959b3e4e9077 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -48,7 +48,7 @@ enum devicetype {
 static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "SET POWER STATE");
+	dev_dbg(&udev->dev, "%s", "SET POWER STATE\n");
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			0x00,			/* __u8 request      */
 			0x40,			/* __u8 request type */
@@ -63,7 +63,7 @@ static int sierra_set_power_state(struct usb_device *udev, __u16 swiState)
 static int sierra_set_ms_mode(struct usb_device *udev, __u16 eSocMode)
 {
 	int result;
-	dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH");
+	dev_dbg(&udev->dev, "%s", "DEVICE MODE SWITCH\n");
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 			SWIMS_USB_REQUEST_SetMode,	/* __u8 request      */
 			SWIMS_USB_REQUEST_TYPE_SetMode,	/* __u8 request type */
@@ -397,7 +397,7 @@ static void sierra_indat_callback(struct urb *urb)
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				dev_err(&port->dev, "resubmit read urb failed."
-					"(%d)", err);
+					"(%d)\n", err);
 		}
 	}
 	return;
@@ -525,7 +525,7 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
 
 		result = usb_submit_urb(urb, GFP_KERNEL);
 		if (result) {
-			dev_err(&port->dev, "submit urb %d failed (%d) %d",
+			dev_err(&port->dev, "submit urb %d failed (%d) %d\n",
 				i, result, urb->transfer_buffer_length);
 		}
 	}
@@ -538,7 +538,7 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
 	if (port->interrupt_in_urb) {
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 		if (result)
-			dev_err(&port->dev, "submit irq_in urb failed %d",
+			dev_err(&port->dev, "submit irq_in urb failed %d\n",
 				result);
 	}
 	return 0;