Merge tag 'usb-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v3.19 merge window

This time, a very pull request with 216 non-merge
commits. Most of the commits contained here are
sparse or coccinelle fixes ranging from missing
'static' to returning 0 in case of errors.

More importantly, we have the removal the now
unnecessary 'driver' argument to ->udc_stop().

DWC2 learned about Dual-Role builds. Users of
this IP can now have a single driver built for
host and device roles.

DWC3 got support for two new HW platforms: Exynos7
and AMD.

The Broadcom USB 3.0 Device Controller IP is now
supported and so is PLX USB338x, which means DWC3
has lost is badge as the only USB 3.0 peripheral
IP supported on Linux.

Thanks for Tony Lindgren's work, we can now have
a distro-like kernel where all MUSB glue layers
can be built into the same kernel (statically
or dynamically linked) and it'll work in PIO (DMA
will come probably on v3.20).

Other than these, the usual set of cleanups and
non-critical fixes.

Signed-off-by: Felipe Balbi <balbi@ti.com>

1 files changed, 19 insertions, 15 deletions

diff --git a/drivers/usb/phy/phy-tahvo.c b/drivers/usb/phy/phy-tahvo.c
index cc61ee44b911..d391c79a542a 100644
--- a/drivers/usb/phy/phy-tahvo.c
+++ b/drivers/usb/phy/phy-tahvo.c
@@ -81,33 +81,35 @@ static void check_vbus_state(struct tahvo_usb *tu)
 
 	reg = retu_read(rdev, TAHVO_REG_IDSR);
 	if (reg & TAHVO_STAT_VBUS) {
-		switch (tu->phy.state) {
+		switch (tu->phy.otg->state) {
 		case OTG_STATE_B_IDLE:
 			/* Enable the gadget driver */
 			if (tu->phy.otg->gadget)
 				usb_gadget_vbus_connect(tu->phy.otg->gadget);
-			tu->phy.state = OTG_STATE_B_PERIPHERAL;
+			tu->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+			usb_phy_set_event(&tu->phy, USB_EVENT_ENUMERATED);
 			break;
 		case OTG_STATE_A_IDLE:
 			/*
 			 * Session is now valid assuming the USB hub is driving
 			 * Vbus.
 			 */
-			tu->phy.state = OTG_STATE_A_HOST;
+			tu->phy.otg->state = OTG_STATE_A_HOST;
 			break;
 		default:
 			break;
 		}
 		dev_info(&tu->pt_dev->dev, "USB cable connected\n");
 	} else {
-		switch (tu->phy.state) {
+		switch (tu->phy.otg->state) {
 		case OTG_STATE_B_PERIPHERAL:
 			if (tu->phy.otg->gadget)
 				usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
-			tu->phy.state = OTG_STATE_B_IDLE;
+			tu->phy.otg->state = OTG_STATE_B_IDLE;
+			usb_phy_set_event(&tu->phy, USB_EVENT_NONE);
 			break;
 		case OTG_STATE_A_HOST:
-			tu->phy.state = OTG_STATE_A_IDLE;
+			tu->phy.otg->state = OTG_STATE_A_IDLE;
 			break;
 		default:
 			break;
@@ -132,14 +134,14 @@ static void tahvo_usb_become_host(struct tahvo_usb *tu)
 	/* Power up the transceiver in USB host mode */
 	retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
 		   USBR_MASTER_SW2 | USBR_MASTER_SW1);
-	tu->phy.state = OTG_STATE_A_IDLE;
+	tu->phy.otg->state = OTG_STATE_A_IDLE;
 
 	check_vbus_state(tu);
 }
 
 static void tahvo_usb_stop_host(struct tahvo_usb *tu)
 {
-	tu->phy.state = OTG_STATE_A_IDLE;
+	tu->phy.otg->state = OTG_STATE_A_IDLE;
 }
 
 static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
@@ -151,7 +153,7 @@ static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
 	/* Power up transceiver and set it in USB peripheral mode */
 	retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
 		   USBR_NSUSPEND | USBR_SLAVE_SW);
-	tu->phy.state = OTG_STATE_B_IDLE;
+	tu->phy.otg->state = OTG_STATE_B_IDLE;
 
 	check_vbus_state(tu);
 }
@@ -160,7 +162,7 @@ static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
 {
 	if (tu->phy.otg->gadget)
 		usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
-	tu->phy.state = OTG_STATE_B_IDLE;
+	tu->phy.otg->state = OTG_STATE_B_IDLE;
 }
 
 static void tahvo_usb_power_off(struct tahvo_usb *tu)
@@ -173,7 +175,7 @@ static void tahvo_usb_power_off(struct tahvo_usb *tu)
 
 	/* Power off transceiver */
 	retu_write(rdev, TAHVO_REG_USBR, 0);
-	tu->phy.state = OTG_STATE_UNDEFINED;
+	tu->phy.otg->state = OTG_STATE_UNDEFINED;
 }
 
 static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
@@ -196,7 +198,8 @@ static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
 
 static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 {
-	struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
+	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+					    phy);
 
 	dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
 
@@ -225,7 +228,8 @@ static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
 static int tahvo_usb_set_peripheral(struct usb_otg *otg,
 				    struct usb_gadget *gadget)
 {
-	struct tahvo_usb *tu = container_of(otg->phy, struct tahvo_usb, phy);
+	struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+					    phy);
 
 	dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget);
 
@@ -379,11 +383,11 @@ static int tahvo_usb_probe(struct platform_device *pdev)
 	/* Create OTG interface */
 	tahvo_usb_power_off(tu);
 	tu->phy.dev = &pdev->dev;
-	tu->phy.state = OTG_STATE_UNDEFINED;
+	tu->phy.otg->state = OTG_STATE_UNDEFINED;
 	tu->phy.label = DRIVER_NAME;
 	tu->phy.set_suspend = tahvo_usb_set_suspend;
 
-	tu->phy.otg->phy = &tu->phy;
+	tu->phy.otg->usb_phy = &tu->phy;
 	tu->phy.otg->set_host = tahvo_usb_set_host;
 	tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;