summaryrefslogtreecommitdiff
path: root/drivers/usb/otg/twl4030-usb.c
diff options
context:
space:
mode:
authorKishon Vijay Abraham I <kishon@ti.com>2012-06-22 17:40:52 +0530
committerFelipe Balbi <balbi@ti.com>2012-06-25 14:07:39 +0300
commitc9721438c009adf8e81d376839ed037c53b9b8d9 (patch)
tree3144ac8f042bd8366352e03eab530de3f9676f00 /drivers/usb/otg/twl4030-usb.c
parent1e5acb8d6113a0f159257845e153d5b870ca618a (diff)
usb: musb: twl: use mailbox API to send VBUS or ID events
The atomic notifier from twl4030/twl6030 to notifiy VBUS and ID events, is replaced by a direct call to omap musb blue. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/otg/twl4030-usb.c')
-rw-r--r--drivers/usb/otg/twl4030-usb.c46
1 files changed, 23 insertions, 23 deletions
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 25a09fabbe35..a7b809e217ea 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -33,11 +33,11 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
+#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
-#include <linux/notifier.h>
#include <linux/slab.h>
/* Register defines */
@@ -159,7 +159,7 @@ struct twl4030_usb {
enum twl4030_usb_mode usb_mode;
int irq;
- u8 linkstat;
+ enum omap_musb_vbus_id_status linkstat;
bool vbus_supplied;
u8 asleep;
bool irq_enabled;
@@ -246,10 +246,11 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
/*-------------------------------------------------------------------------*/
-static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
+static enum omap_musb_vbus_id_status
+ twl4030_usb_linkstat(struct twl4030_usb *twl)
{
int status;
- int linkstat = USB_EVENT_NONE;
+ enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
struct usb_otg *otg = twl->phy.otg;
twl->vbus_supplied = false;
@@ -273,24 +274,24 @@ static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
twl->vbus_supplied = true;
if (status & BIT(2))
- linkstat = USB_EVENT_ID;
+ linkstat = OMAP_MUSB_ID_GROUND;
else
- linkstat = USB_EVENT_VBUS;
- } else
- linkstat = USB_EVENT_NONE;
+ linkstat = OMAP_MUSB_VBUS_VALID;
+ } else {
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN)
+ linkstat = OMAP_MUSB_VBUS_OFF;
+ }
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
status, status, linkstat);
- twl->phy.last_event = linkstat;
-
/* REVISIT this assumes host and peripheral controllers
* are registered, and that both are active...
*/
spin_lock_irq(&twl->lock);
twl->linkstat = linkstat;
- if (linkstat == USB_EVENT_ID) {
+ if (linkstat == OMAP_MUSB_ID_GROUND) {
otg->default_a = true;
twl->phy.state = OTG_STATE_A_IDLE;
} else {
@@ -501,10 +502,10 @@ static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
struct twl4030_usb *twl = _twl;
- int status;
+ enum omap_musb_vbus_id_status status;
status = twl4030_usb_linkstat(twl);
- if (status >= 0) {
+ if (status > 0) {
/* FIXME add a set_power() method so that B-devices can
* configure the charger appropriately. It's not always
* correct to consume VBUS power, and how much current to
@@ -516,13 +517,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
- if (status == USB_EVENT_NONE)
+ if (status == OMAP_MUSB_VBUS_OFF ||
+ status == OMAP_MUSB_ID_FLOAT)
twl4030_phy_suspend(twl, 0);
else
twl4030_phy_resume(twl);
- atomic_notifier_call_chain(&twl->phy.notifier, status,
- twl->phy.otg->gadget);
+ omap_musb_mailbox(twl->linkstat);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -531,11 +532,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
static void twl4030_usb_phy_init(struct twl4030_usb *twl)
{
- int status;
+ enum omap_musb_vbus_id_status status;
status = twl4030_usb_linkstat(twl);
- if (status >= 0) {
- if (status == USB_EVENT_NONE) {
+ if (status > 0) {
+ if (status == OMAP_MUSB_VBUS_OFF ||
+ status == OMAP_MUSB_ID_FLOAT) {
__twl4030_phy_power(twl, 0);
twl->asleep = 1;
} else {
@@ -543,8 +545,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
twl->asleep = 0;
}
- atomic_notifier_call_chain(&twl->phy.notifier, status,
- twl->phy.otg->gadget);
+ omap_musb_mailbox(twl->linkstat);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
}
@@ -613,6 +614,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
twl->usb_mode = pdata->usb_mode;
twl->vbus_supplied = false;
twl->asleep = 1;
+ twl->linkstat = OMAP_MUSB_UNKNOWN;
twl->phy.dev = twl->dev;
twl->phy.label = "twl4030";
@@ -639,8 +641,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");
- ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
-
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
*