usb: typec: ucsi: Add ACPI driver

Driver for ACPI UCSI interface method. This driver replaces
the previous UCSI driver drivers/usb/misc/ucsi.c.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 0 insertions, 720 deletions

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 1d1d70d62a19..0f9f25db9163 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -275,29 +275,3 @@ config USB_CHAOSKEY
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called chaoskey.
-
-config UCSI
-	tristate "USB Type-C Connector System Software Interface driver"
-	depends on ACPI
-	help
-	  UCSI driver is meant to be used as a convenience tool for desktop and
-	  server systems that are not equipped to handle USB in device mode. It
-	  will always select USB host role for the USB Type-C ports on systems
-	  that provide UCSI interface.
-
-	  USB Type-C Connector System Software Interface (UCSI) is a
-	  specification for an interface that allows the Operating System to
-	  control the USB Type-C ports on a system. Things the need controlling
-	  include the USB Data Role (host or device), and when USB Power
-	  Delivery is supported, the Power Role (source or sink). With USB
-	  Type-C connectors, when two dual role capable devices are attached
-	  together, the data role is selected randomly. Therefore it is
-	  important to give the OS a way to select the role. Otherwise the user
-	  would have to unplug and replug in order in order to attempt to swap
-	  the data and power roles.
-
-	  The UCSI specification can be downloaded from:
-	  http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html
-
-	  To compile the driver as a module, choose M here: the module will be
-	  called ucsi.
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index f6ac6c99a6e6..7fdb45fc976f 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_USB_HUB_USB251XB)		+= usb251xb.o
 obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
 obj-$(CONFIG_USB_HSIC_USB4604)		+= usb4604.o
 obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
-obj-$(CONFIG_UCSI)			+= ucsi.o
 
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
diff --git a/drivers/usb/misc/ucsi.c b/drivers/usb/misc/ucsi.c
deleted file mode 100644
index 07397bddefa3..000000000000
--- a/drivers/usb/misc/ucsi.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * USB Type-C Connector System Software Interface driver
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/acpi.h>
-
-#include "ucsi.h"
-
-/* Double the time defined by MIN_TIME_TO_RESPOND_WITH_BUSY */
-#define UCSI_TIMEOUT_MS 20
-
-enum ucsi_status {
-	UCSI_IDLE = 0,
-	UCSI_BUSY,
-	UCSI_ERROR,
-};
-
-struct ucsi_connector {
-	int num;
-	struct ucsi *ucsi;
-	struct work_struct work;
-	struct ucsi_connector_capability cap;
-};
-
-struct ucsi {
-	struct device *dev;
-	struct ucsi_data __iomem *data;
-
-	enum ucsi_status status;
-	struct completion complete;
-	struct ucsi_capability cap;
-	struct ucsi_connector *connector;
-
-	/* device lock */
-	spinlock_t dev_lock;
-
-	/* PPM Communication lock */
-	struct mutex ppm_lock;
-
-	/* PPM communication flags */
-	unsigned long flags;
-#define EVENT_PENDING	0
-#define COMMAND_PENDING	1
-};
-
-static int ucsi_acpi_cmd(struct ucsi *ucsi, struct ucsi_control *ctrl)
-{
-	uuid_le uuid = UUID_LE(0x6f8398c2, 0x7ca4, 0x11e4,
-			       0xad, 0x36, 0x63, 0x10, 0x42, 0xb5, 0x00, 0x8f);
-	union acpi_object *obj;
-
-	ucsi->data->ctrl.raw_cmd = ctrl->raw_cmd;
-
-	obj = acpi_evaluate_dsm(ACPI_HANDLE(ucsi->dev), uuid.b, 1, 1, NULL);
-	if (!obj) {
-		dev_err(ucsi->dev, "%s: failed to evaluate _DSM\n", __func__);
-		return -EIO;
-	}
-
-	ACPI_FREE(obj);
-	return 0;
-}
-
-static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data)
-{
-	struct ucsi *ucsi = data;
-	struct ucsi_cci *cci;
-
-	spin_lock(&ucsi->dev_lock);
-
-	ucsi->status = UCSI_IDLE;
-	cci = &ucsi->data->cci;
-
-	/*
-	 * REVISIT: This is not documented behavior, but all known PPMs ACK
-	 * asynchronous events by sending notification with cleared CCI.
-	 */
-	if (!ucsi->data->raw_cci) {
-		if (test_bit(EVENT_PENDING, &ucsi->flags))
-			complete(&ucsi->complete);
-		else
-			dev_WARN(ucsi->dev, "spurious notification\n");
-		goto out_unlock;
-	}
-
-	if (test_bit(COMMAND_PENDING, &ucsi->flags)) {
-		if (cci->busy) {
-			ucsi->status = UCSI_BUSY;
-			complete(&ucsi->complete);
-
-			goto out_unlock;
-		} else if (cci->ack_complete || cci->cmd_complete) {
-			/* Error Indication is only valid with commands */
-			if (cci->error && cci->cmd_complete)
-				ucsi->status = UCSI_ERROR;
-
-			ucsi->data->ctrl.raw_cmd = 0;
-			complete(&ucsi->complete);
-		}
-	}
-
-	if (cci->connector_change) {
-		struct ucsi_connector *con;
-
-		/*
-		 * This is workaround for buggy PPMs that create asynchronous
-		 * event notifications before OPM has enabled them.
-		 */
-		if (!ucsi->connector)
-			goto out_unlock;
-
-		con = ucsi->connector + (cci->connector_change - 1);
-
-		/*
-		 * PPM will not clear the connector specific bit in Connector
-		 * Change Indication field of CCI until the driver has ACK it,
-		 * and the driver can not ACK it before it has been processed.
-		 * The PPM will not generate new events before the first has
-		 * been acknowledged, even if they are for an other connector.
-		 * So only one event at a time.
-		 */
-		if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
-			schedule_work(&con->work);
-	}
-out_unlock:
-	spin_unlock(&ucsi->dev_lock);
-}
-
-static int ucsi_ack(struct ucsi *ucsi, u8 cmd)
-{
-	struct ucsi_control ctrl;
-	int ret;
-
-	ctrl.cmd.cmd = UCSI_ACK_CC_CI;
-	ctrl.cmd.length = 0;
-	ctrl.cmd.data = cmd;
-	ret = ucsi_acpi_cmd(ucsi, &ctrl);
-	if (ret)
-		return ret;
-
-	/* Waiting for ACK also with ACK CMD for now */
-	ret = wait_for_completion_timeout(&ucsi->complete,
-					  msecs_to_jiffies(UCSI_TIMEOUT_MS));
-	if (!ret)
-		return -ETIMEDOUT;
-	return 0;
-}
-
-static int ucsi_run_cmd(struct ucsi *ucsi, struct ucsi_control *ctrl,
-			void *data, size_t size)
-{
-	u16 err_value = 0;
-	int ret;
-
-	set_bit(COMMAND_PENDING, &ucsi->flags);
-
-	ret = ucsi_acpi_cmd(ucsi, ctrl);
-	if (ret)
-		goto err_clear_flag;
-
-	ret = wait_for_completion_timeout(&ucsi->complete,
-					  msecs_to_jiffies(UCSI_TIMEOUT_MS));
-	if (!ret) {
-		ret = -ETIMEDOUT;
-		goto err_clear_flag;
-	}
-
-	switch (ucsi->status) {
-	case UCSI_IDLE:
-		if (data)
-			memcpy(data, ucsi->data->message_in, size);
-
-		ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
-		break;
-	case UCSI_BUSY:
-		/* The caller decides whether to cancel or not */
-		ret = -EBUSY;
-		goto err_clear_flag;
-	case UCSI_ERROR:
-		ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
-		if (ret)
-			goto err_clear_flag;
-
-		ctrl->cmd.cmd = UCSI_GET_ERROR_STATUS;
-		ctrl->cmd.length = 0;
-		ctrl->cmd.data = 0;
-		ret = ucsi_acpi_cmd(ucsi, ctrl);
-		if (ret)
-			goto err_clear_flag;
-
-		ret = wait_for_completion_timeout(&ucsi->complete,
-					msecs_to_jiffies(UCSI_TIMEOUT_MS));
-		if (!ret) {
-			ret = -ETIMEDOUT;
-			goto err_clear_flag;
-		}
-
-		memcpy(&err_value, ucsi->data->message_in, sizeof(err_value));
-
-		/* Something has really gone wrong */
-		if (WARN_ON(ucsi->status == UCSI_ERROR)) {
-			ret = -ENODEV;
-			goto err_clear_flag;
-		}
-
-		ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
-		if (ret)
-			goto err_clear_flag;
-
-		switch (err_value) {
-		case UCSI_ERROR_INCOMPATIBLE_PARTNER:
-			ret = -EOPNOTSUPP;
-			break;
-		case UCSI_ERROR_CC_COMMUNICATION_ERR:
-			ret = -ECOMM;
-			break;
-		case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL:
-			ret = -EIO;
-			break;
-		case UCSI_ERROR_DEAD_BATTERY:
-			dev_warn(ucsi->dev, "Dead battery condition!\n");
-			ret = -EPERM;
-			break;
-		/* The following mean a bug in this driver */
-		case UCSI_ERROR_INVALID_CON_NUM:
-		case UCSI_ERROR_UNREGONIZED_CMD:
-		case UCSI_ERROR_INVALID_CMD_ARGUMENT:
-		default:
-			dev_warn(ucsi->dev,
-				 "%s: possible UCSI driver bug - error %hu\n",
-				 __func__, err_value);
-			ret = -EINVAL;
-			break;
-		}
-		break;
-	}
-	ctrl->raw_cmd = 0;
-err_clear_flag:
-	clear_bit(COMMAND_PENDING, &ucsi->flags);
-	return ret;
-}
-
-static void ucsi_connector_change(struct work_struct *work)
-{
-	struct ucsi_connector *con = container_of(work, struct ucsi_connector,
-						  work);
-	struct ucsi_connector_status constat;
-	struct ucsi *ucsi = con->ucsi;
-	struct ucsi_control ctrl;
-	int ret;
-
-	mutex_lock(&ucsi->ppm_lock);
-
-	ctrl.cmd.cmd = UCSI_GET_CONNECTOR_STATUS;
-	ctrl.cmd.length = 0;
-	ctrl.cmd.data = con->num;
-	ret = ucsi_run_cmd(con->ucsi, &ctrl, &constat, sizeof(constat));
-	if (ret) {
-		dev_err(ucsi->dev, "%s: failed to read connector status (%d)\n",
-			__func__, ret);
-		goto out_ack_event;
-	}
-
-	/* Ignoring disconnections and Alternate Modes */
-	if (!constat.connected || !(constat.change &
-	    (UCSI_CONSTAT_PARTNER_CHANGE | UCSI_CONSTAT_CONNECT_CHANGE)) ||
-	    constat.partner_flags & UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE)
-		goto out_ack_event;
-
-	/* If the partner got USB Host role, attempting swap */
-	if (constat.partner_type & UCSI_CONSTAT_PARTNER_TYPE_DFP) {
-		ctrl.uor.cmd = UCSI_SET_UOR;
-		ctrl.uor.con_num = con->num;
-		ctrl.uor.role = UCSI_UOR_ROLE_DFP;
-
-		ret = ucsi_run_cmd(con->ucsi, &ctrl, NULL, 0);
-		if (ret)
-			dev_err(ucsi->dev, "%s: failed to swap role (%d)\n",
-				__func__, ret);
-	}
-out_ack_event:
-	ucsi_ack(ucsi, UCSI_ACK_EVENT);
-	clear_bit(EVENT_PENDING, &ucsi->flags);
-	mutex_unlock(&ucsi->ppm_lock);
-}
-
-static int ucsi_reset_ppm(struct ucsi *ucsi)
-{
-	int timeout = UCSI_TIMEOUT_MS;
-	struct ucsi_control ctrl;
-	int ret;
-
-	memset(&ctrl, 0, sizeof(ctrl));
-	ctrl.cmd.cmd = UCSI_PPM_RESET;
-	ret = ucsi_acpi_cmd(ucsi, &ctrl);
-	if (ret)
-		return ret;
-
-	/* There is no quarantee the PPM will ever set the RESET_COMPLETE bit */
-	while (!ucsi->data->cci.reset_complete && timeout--)
-		usleep_range(1000, 2000);
-	return 0;
-}
-
-static int ucsi_init(struct ucsi *ucsi)
-{
-	struct ucsi_connector *con;
-	struct ucsi_control ctrl;
-	int ret;
-	int i;
-
-	init_completion(&ucsi->complete);
-	spin_lock_init(&ucsi->dev_lock);
-	mutex_init(&ucsi->ppm_lock);
-
-	/* Reset the PPM */
-	ret = ucsi_reset_ppm(ucsi);
-	if (ret)
-		return ret;
-
-	/*
-	 * REVISIT: Executing second reset to WA an issue seen on some of the
-	 * Broxton based platforms, where the first reset puts the PPM into a
-	 * state where it's unable to recognise some of the commands.
-	 */
-	ret = ucsi_reset_ppm(ucsi);
-	if (ret)
-		return ret;
-
-	mutex_lock(&ucsi->ppm_lock);
-
-	/* Enable basic notifications */
-	ctrl.cmd.cmd = UCSI_SET_NOTIFICATION_ENABLE;
-	ctrl.cmd.length = 0;
-	ctrl.cmd.data = UCSI_ENABLE_NTFY_CMD_COMPLETE | UCSI_ENABLE_NTFY_ERROR;
-	ret = ucsi_run_cmd(ucsi, &ctrl, NULL, 0);
-	if (ret)
-		goto err_reset;
-
-	/* Get PPM capabilities */
-	ctrl.cmd.cmd = UCSI_GET_CAPABILITY;
-	ret = ucsi_run_cmd(ucsi, &ctrl, &ucsi->cap, sizeof(ucsi->cap));
-	if (ret)
-		goto err_reset;
-
-	if (!ucsi->cap.num_connectors) {
-		ret = -ENODEV;
-		goto err_reset;
-	}
-
-	ucsi->connector = devm_kcalloc(ucsi->dev, ucsi->cap.num_connectors,
-				       sizeof(*ucsi->connector), GFP_KERNEL);
-	if (!ucsi->connector) {
-		ret = -ENOMEM;
-		goto err_reset;
-	}
-
-	for (i = 1, con = ucsi->connector; i < ucsi->cap.num_connectors + 1;
-	     i++, con++) {
-		/* Get connector capability */
-		ctrl.cmd.cmd = UCSI_GET_CONNECTOR_CAPABILITY;
-		ctrl.cmd.data = i;
-		ret = ucsi_run_cmd(ucsi, &ctrl, &con->cap, sizeof(con->cap));
-		if (ret)
-			goto err_reset;
-
-		con->num = i;
-		con->ucsi = ucsi;
-		INIT_WORK(&con->work, ucsi_connector_change);
-	}
-
-	/* Enable all notifications */
-	ctrl.cmd.cmd = UCSI_SET_NOTIFICATION_ENABLE;
-	ctrl.cmd.data = UCSI_ENABLE_NTFY_ALL;
-	ret = ucsi_run_cmd(ucsi, &ctrl, NULL, 0);
-	if (ret < 0)
-		goto err_reset;
-
-	mutex_unlock(&ucsi->ppm_lock);
-	return 0;
-err_reset:
-	ucsi_reset_ppm(ucsi);
-	mutex_unlock(&ucsi->ppm_lock);
-	return ret;
-}
-
-static int ucsi_acpi_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	acpi_status status;
-	struct ucsi *ucsi;
-	int ret;
-
-	ucsi = devm_kzalloc(&pdev->dev, sizeof(*ucsi), GFP_KERNEL);
-	if (!ucsi)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "missing memory resource\n");
-		return -ENODEV;
-	}
-
-	/*
-	 * NOTE: ACPI has claimed the memory region as it's also an Operation
-	 * Region. It's not possible to request it in the driver.
-	 */
-	ucsi->data = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!ucsi->data)
-		return -ENOMEM;
-
-	ucsi->dev = &pdev->dev;
-
-	status = acpi_install_notify_handler(ACPI_HANDLE(&pdev->dev),
-					     ACPI_ALL_NOTIFY,
-					     ucsi_acpi_notify, ucsi);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	ret = ucsi_init(ucsi);
-	if (ret) {
-		acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev),
-					   ACPI_ALL_NOTIFY,
-					   ucsi_acpi_notify);
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, ucsi);
-	return 0;
-}
-
-static int ucsi_acpi_remove(struct platform_device *pdev)
-{
-	struct ucsi *ucsi = platform_get_drvdata(pdev);
-
-	acpi_remove_notify_handler(ACPI_HANDLE(&pdev->dev),
-				   ACPI_ALL_NOTIFY, ucsi_acpi_notify);
-
-	/* Make sure there are no events in the middle of being processed */
-	if (wait_on_bit_timeout(&ucsi->flags, EVENT_PENDING,
-				TASK_UNINTERRUPTIBLE,
-				msecs_to_jiffies(UCSI_TIMEOUT_MS)))
-		dev_WARN(ucsi->dev, "%s: Events still pending\n", __func__);
-
-	ucsi_reset_ppm(ucsi);
-	return 0;
-}
-
-static const struct acpi_device_id ucsi_acpi_match[] = {
-	{ "PNP0CA0", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, ucsi_acpi_match);
-
-static struct platform_driver ucsi_acpi_platform_driver = {
-	.driver = {
-		.name = "ucsi_acpi",
-		.acpi_match_table = ACPI_PTR(ucsi_acpi_match),
-	},
-	.probe = ucsi_acpi_probe,
-	.remove = ucsi_acpi_remove,
-};
-
-module_platform_driver(ucsi_acpi_platform_driver);
-
-MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("USB Type-C System Software Interface (UCSI) driver");
diff --git a/drivers/usb/misc/ucsi.h b/drivers/usb/misc/ucsi.h
deleted file mode 100644
index 6dd11d1fe225..000000000000
--- a/drivers/usb/misc/ucsi.h
+++ /dev/null
@@ -1,215 +0,0 @@
-
-#include <linux/types.h>
-
-/* -------------------------------------------------------------------------- */
-
-/* Command Status and Connector Change Indication (CCI) data structure */
-struct ucsi_cci {
-	unsigned int RESERVED1:1;
-	unsigned int connector_change:7;
-	u8 data_length;
-	unsigned int RESERVED9:9;
-	unsigned int not_supported:1;
-	unsigned int cancel_complete:1;
-	unsigned int reset_complete:1;
-	unsigned int busy:1;
-	unsigned int ack_complete:1;
-	unsigned int error:1;
-	unsigned int cmd_complete:1;
-} __packed;
-
-/* Default fields in CONTROL data structure */
-struct ucsi_command {
-	u8 cmd;
-	u8 length;
-	u64 data:48;
-} __packed;
-
-/* Set USB Operation Mode Command structure */
-struct ucsi_uor_cmd {
-	u8 cmd;
-	u8 length;
-	u64 con_num:7;
-	u64 role:3;
-#define UCSI_UOR_ROLE_DFP			BIT(0)
-#define UCSI_UOR_ROLE_UFP			BIT(1)
-#define UCSI_UOR_ROLE_DRP			BIT(2)
-	u64 data:38;
-} __packed;
-
-struct ucsi_control {
-	union {
-		u64 raw_cmd;
-		struct ucsi_command cmd;
-		struct ucsi_uor_cmd uor;
-	};
-};
-
-struct ucsi_data {
-	u16 version;
-	u16 RESERVED;
-	union {
-		u32 raw_cci;
-		struct ucsi_cci cci;
-	};
-	struct ucsi_control ctrl;
-	u32 message_in[4];
-	u32 message_out[4];
-} __packed;
-
-/* Commands */
-#define UCSI_PPM_RESET			0x01
-#define UCSI_CANCEL			0x02
-#define UCSI_CONNECTOR_RESET		0x03
-#define UCSI_ACK_CC_CI			0x04
-#define UCSI_SET_NOTIFICATION_ENABLE	0x05
-#define UCSI_GET_CAPABILITY		0x06
-#define UCSI_GET_CONNECTOR_CAPABILITY	0x07
-#define UCSI_SET_UOM			0x08
-#define UCSI_SET_UOR			0x09
-#define UCSI_SET_PDM			0x0A
-#define UCSI_SET_PDR			0x0B
-#define UCSI_GET_ALTERNATE_MODES	0x0C
-#define UCSI_GET_CAM_SUPPORTED		0x0D
-#define UCSI_GET_CURRENT_CAM		0x0E
-#define UCSI_SET_NEW_CAM		0x0F
-#define UCSI_GET_PDOS			0x10
-#define UCSI_GET_CABLE_PROPERTY		0x11
-#define UCSI_GET_CONNECTOR_STATUS	0x12
-#define UCSI_GET_ERROR_STATUS		0x13
-
-/* ACK_CC_CI commands */
-#define UCSI_ACK_EVENT			1
-#define UCSI_ACK_CMD			2
-
-/* Bits for SET_NOTIFICATION_ENABLE command */
-#define UCSI_ENABLE_NTFY_CMD_COMPLETE		BIT(0)
-#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE	BIT(1)
-#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE	BIT(2)
-#define UCSI_ENABLE_NTFY_CAP_CHANGE		BIT(5)
-#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE	BIT(6)
-#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE	BIT(7)
-#define UCSI_ENABLE_NTFY_CAM_CHANGE		BIT(8)
-#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE	BIT(9)
-#define UCSI_ENABLE_NTFY_PARTNER_CHANGE		BIT(11)
-#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE		BIT(12)
-#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE	BIT(14)
-#define UCSI_ENABLE_NTFY_ERROR			BIT(15)
-#define UCSI_ENABLE_NTFY_ALL			0xdbe7
-
-/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
-#define UCSI_ERROR_UNREGONIZED_CMD		BIT(0)
-#define UCSI_ERROR_INVALID_CON_NUM		BIT(1)
-#define UCSI_ERROR_INVALID_CMD_ARGUMENT		BIT(2)
-#define UCSI_ERROR_INCOMPATIBLE_PARTNER		BIT(3)
-#define UCSI_ERROR_CC_COMMUNICATION_ERR		BIT(4)
-#define UCSI_ERROR_DEAD_BATTERY			BIT(5)
-#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL	BIT(6)
-
-/* Data structure filled by PPM in response to GET_CAPABILITY command. */
-struct ucsi_capability {
-	u32 attributes;
-#define UCSI_CAP_ATTR_DISABLE_STATE		BIT(0)
-#define UCSI_CAP_ATTR_BATTERY_CHARGING		BIT(1)
-#define UCSI_CAP_ATTR_USB_PD			BIT(2)
-#define UCSI_CAP_ATTR_TYPEC_CURRENT		BIT(6)
-#define UCSI_CAP_ATTR_POWER_AC_SUPPLY		BIT(8)
-#define UCSI_CAP_ATTR_POWER_OTHER		BIT(10)
-#define UCSI_CAP_ATTR_POWER_VBUS		BIT(14)
-	u8 num_connectors;
-	u32 features:24;
-#define UCSI_CAP_SET_UOM			BIT(0)
-#define UCSI_CAP_SET_PDM			BIT(1)
-#define UCSI_CAP_ALT_MODE_DETAILS		BIT(2)
-#define UCSI_CAP_ALT_MODE_OVERRIDE		BIT(3)
-#define UCSI_CAP_PDO_DETAILS			BIT(4)
-#define UCSI_CAP_CABLE_DETAILS			BIT(5)
-#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS	BIT(6)
-#define UCSI_CAP_PD_RESET			BIT(7)
-	u8 num_alt_modes;
-	u8 RESERVED;
-	u16 bc_version;
-	u16 pd_version;
-	u16 typec_version;
-} __packed;
-
-/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
-struct ucsi_connector_capability {
-	u8 op_mode;
-#define UCSI_CONCAP_OPMODE_DFP			BIT(0)
-#define UCSI_CONCAP_OPMODE_UFP			BIT(1)
-#define UCSI_CONCAP_OPMODE_DRP			BIT(2)
-#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY	BIT(3)
-#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY	BIT(4)
-#define UCSI_CONCAP_OPMODE_USB2			BIT(5)
-#define UCSI_CONCAP_OPMODE_USB3			BIT(6)
-#define UCSI_CONCAP_OPMODE_ALT_MODE		BIT(7)
-	u8 provider:1;
-	u8 consumer:1;
-} __packed;
-
-/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
-struct ucsi_cable_property {
-	u16 speed_supported;
-	u8 current_capability;
-	u8 vbus_in_cable:1;
-	u8 active_cable:1;
-	u8 directionality:1;
-	u8 plug_type:2;
-#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A		0
-#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B		1
-#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C		2
-#define UCSI_CABLE_PROPERTY_PLUG_OTHER		3
-	u8 mode_support:1;
-	u8 RESERVED_2:2;
-	u8 latency:4;
-	u8 RESERVED_4:4;
-} __packed;
-
-/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
-struct ucsi_connector_status {
-	u16 change;
-#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE		BIT(1)
-#define UCSI_CONSTAT_POWER_OPMODE_CHANGE	BIT(2)
-#define UCSI_CONSTAT_PDOS_CHANGE		BIT(5)
-#define UCSI_CONSTAT_POWER_LEVEL_CHANGE		BIT(6)
-#define UCSI_CONSTAT_PD_RESET_COMPLETE		BIT(7)
-#define UCSI_CONSTAT_CAM_CHANGE			BIT(8)
-#define UCSI_CONSTAT_BC_CHANGE			BIT(9)
-#define UCSI_CONSTAT_PARTNER_CHANGE		BIT(11)
-#define UCSI_CONSTAT_POWER_DIR_CHANGE		BIT(12)
-#define UCSI_CONSTAT_CONNECT_CHANGE		BIT(14)
-#define UCSI_CONSTAT_ERROR			BIT(15)
-	u16 pwr_op_mode:3;
-#define UCSI_CONSTAT_PWR_OPMODE_NONE		0
-#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT		1
-#define UCSI_CONSTAT_PWR_OPMODE_BC		2
-#define UCSI_CONSTAT_PWR_OPMODE_PD		3
-#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_3	4
-#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0	5
-	u16 connected:1;
-	u16 pwr_dir:1;
-	u16 partner_flags:8;
-#define UCSI_CONSTAT_PARTNER_FLAG_USB		BIT(0)
-#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE	BIT(1)
-	u16 partner_type:3;
-#define UCSI_CONSTAT_PARTNER_TYPE_DFP		1
-#define UCSI_CONSTAT_PARTNER_TYPE_UFP		2
-#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_NO_UFP	3 /* Powered Cable */
-#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP	4 /* Powered Cable */
-#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG		5
-#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO		6
-	u32 request_data_obj;
-	u8 bc_status:2;
-#define UCSI_CONSTAT_BC_NOT_CHARGING		0
-#define UCSI_CONSTAT_BC_NOMINAL_CHARGING	1
-#define UCSI_CONSTAT_BC_SLOW_CHARGING		2
-#define UCSI_CONSTAT_BC_TRICKLE_CHARGING	3
-	u8 provider_cap_limit_reason:4;
-#define UCSI_CONSTAT_CAP_PWR_LOWERED		0
-#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT	1
-	u8 RESERVED:2;
-} __packed;
-
-/* -------------------------------------------------------------------------- */
-