diff options
| author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-07-16 13:16:09 -0700 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-07-16 13:16:09 -0700 |
| commit | b903bd69e3fa156598def8d6433dfe5352af8da3 (patch) | |
| tree | a13380f31bab62acfd667910656525c09511cb8a /drivers/usb/host | |
| parent | 84a1caf1453c3d44050bd22db958af4a7f99315c (diff) | |
| parent | 1a49e2ac9651df7349867a5cf44e2c83de1046af (diff) | |
Merge 3.5-rc7 into usb-next
This resolves the merge issue with the drivers/usb/host/ehci-omap.c
file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host')
42 files changed, 474 insertions, 1000 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 83e58df29fe3..18ba33da34ec 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -652,7 +652,7 @@ config USB_HCD_BCMA select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help - Enbale support for the EHCI and OCHI host controller on an bcma bus. + Enable support for the EHCI and OCHI host controller on an bcma bus. It converts the bcma driver into two platform device drivers for ehci and ohci. @@ -664,7 +664,7 @@ config USB_HCD_SSB select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD help - Enbale support for the EHCI and OCHI host controller on an bcma bus. + Enable support for the EHCI and OCHI host controller on an bcma bus. It converts the bcma driver into two platform device drivers for ehci and ohci. diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index cf14c95a6700..a47e2cffaaf8 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -53,30 +53,15 @@ static void atmel_stop_ehci(struct platform_device *pdev) static int ehci_atmel_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval = 0; + int retval; /* registers start at offset 0x0 */ ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - retval = ehci_halt(ehci); - if (retval) - return retval; - /* data structure init */ - retval = ehci_init(hcd); + retval = ehci_setup(hcd); if (retval) return retval; - ehci->sbrn = 0x20; - - ehci_reset(ehci); ehci_port_power(ehci, 0); return retval; diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index bf7441afed16..cba10d625a5d 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -20,10 +20,12 @@ extern int usb_disabled(void); static int au1xxx_ehci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret = ehci_init(hcd); + int ret; + + ehci->caps = hcd->regs; + ret = ehci_setup(hcd); ehci->need_io_watchdog = 0; - ehci_reset(ehci); return ret; } @@ -78,7 +80,6 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; - struct ehci_hcd *ehci; struct resource *res; int ret; @@ -116,13 +117,6 @@ static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev) goto err3; } - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl(&ehci->caps->hcs_params); - ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED); if (ret == 0) { @@ -158,28 +152,10 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev) static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - unsigned long flags; - int rc = 0; - - if (time_before(jiffies, ehci->next_statechange)) - msleep(10); - - /* Root hub was already suspended. Disable irq emission and - * mark HW unaccessible. The PM and USB cores make sure that - * the root hub is either suspended or stopped. - */ - ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); - spin_lock_irqsave(&ehci->lock, flags); - ehci_writel(ehci, 0, &ehci->regs->intr_enable); - (void)ehci_readl(ehci, &ehci->regs->intr_enable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - spin_unlock_irqrestore(&ehci->lock, flags); - - // could save FLADJ in case of Vaux power loss - // ... we'd only use it to handle clock skew + bool do_wakeup = device_may_wakeup(dev); + int rc; + rc = ehci_suspend(hcd, do_wakeup); alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); return rc; @@ -188,56 +164,9 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) static int ehci_hcd_au1xxx_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); - - // maybe restore FLADJ - - if (time_before(jiffies, ehci->next_statechange)) - msleep(100); - - /* Mark hardware accessible again as we are out of D3 state by now */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - /* If CF is still set, we maintained PCI Vaux power. - * Just undo the effect of ehci_pci_suspend(). - */ - if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { - int mask = INTR_MASK; - - ehci_prepare_ports_for_controller_resume(ehci); - if (!hcd->self.root_hub->do_remote_wakeup) - mask &= ~STS_PCD; - ehci_writel(ehci, mask, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - return 0; - } - - ehci_dbg(ehci, "lost power, restarting\n"); - usb_root_hub_lost_power(hcd->self.root_hub); - - /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having let BIOS kick in during reboot. - */ - (void) ehci_halt(ehci); - (void) ehci_reset(ehci); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq(&ehci->lock); - if (ehci->reclaim) - end_unlink_async(ehci); - ehci_work(ehci); - spin_unlock_irq(&ehci->lock); - - ehci_writel(ehci, ehci->command, &ehci->regs->command); - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); - - ehci->rh_state = EHCI_RH_SUSPENDED; + ehci_resume(hcd, false); return 0; } diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c index 6536abdea6e6..caaa3e5be334 100644 --- a/drivers/usb/host/ehci-cns3xxx.c +++ b/drivers/usb/host/ehci-cns3xxx.c @@ -33,14 +33,10 @@ static int cns3xxx_ehci_init(struct usb_hcd *hcd) } ehci->caps = hcd->regs; - ehci->regs = hcd->regs - + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); hcd->has_tt = 0; - ehci_reset(ehci); - retval = ehci_init(hcd); + retval = ehci_setup(hcd); if (retval) return retval; diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 43362577b54a..ab52db684b63 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -27,6 +27,7 @@ #include <linux/types.h> #include <linux/delay.h> #include <linux/pm.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/fsl_devices.h> @@ -142,19 +143,19 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, if (pdata->operating_mode == FSL_USB2_DR_OTG) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - ehci->transceiver = usb_get_transceiver(); - dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, transceiver=0x%p\n", - hcd, ehci, ehci->transceiver); + hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); + dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", + hcd, ehci, hcd->phy); - if (ehci->transceiver) { - retval = otg_set_host(ehci->transceiver->otg, + if (!IS_ERR_OR_NULL(hcd->phy)) { + retval = otg_set_host(hcd->phy->otg, &ehci_to_hcd(ehci)->self); if (retval) { - usb_put_transceiver(ehci->transceiver); + usb_put_phy(hcd->phy); goto err4; } } else { - dev_err(&pdev->dev, "can't find transceiver\n"); + dev_err(&pdev->dev, "can't find phy\n"); retval = -ENODEV; goto err4; } @@ -190,11 +191,10 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd, struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - if (ehci->transceiver) { - otg_set_host(ehci->transceiver->otg, NULL); - usb_put_transceiver(ehci->transceiver); + if (!IS_ERR_OR_NULL(hcd->phy)) { + otg_set_host(hcd->phy->otg, NULL); + usb_put_phy(hcd->phy); } usb_remove_hcd(hcd); @@ -348,29 +348,13 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); hcd->has_tt = 1; - retval = ehci_halt(ehci); - if (retval) - return retval; - - /* data structure init */ - retval = ehci_init(hcd); + retval = ehci_setup(hcd); if (retval) return retval; - ehci->sbrn = 0x20; - - ehci_reset(ehci); - if (of_device_is_compatible(dev->parent->of_node, "fsl,mpc5121-usb2-dr")) { /* diff --git a/drivers/usb/host/ehci-grlib.c b/drivers/usb/host/ehci-grlib.c index fdfd8c5b639b..22ca45c079a4 100644 --- a/drivers/usb/host/ehci-grlib.c +++ b/drivers/usb/host/ehci-grlib.c @@ -40,18 +40,13 @@ static int ehci_grlib_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; - retval = ehci_halt(ehci); + retval = ehci_setup(hcd); if (retval) return retval; - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; ehci_port_power(ehci, 1); - return ehci_reset(ehci); + return retval; } @@ -164,12 +159,6 @@ static int __devinit ehci_hcd_grlib_probe(struct platform_device *op) ehci->big_endian_capbase = 1; } - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - rv = usb_add_hcd(hcd, irq, 0); if (rv) goto err_ehci; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 800be38c78b4..f9a783bfa1fe 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -203,11 +203,9 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, /* check TDI/ARC silicon is in host mode */ static int tdi_in_host_mode (struct ehci_hcd *ehci) { - u32 __iomem *reg_ptr; u32 tmp; - reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE); - tmp = ehci_readl(ehci, reg_ptr); + tmp = ehci_readl(ehci, &ehci->regs->usbmode); return (tmp & 3) == USBMODE_CM_HC; } @@ -303,11 +301,9 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { - u32 __iomem *reg_ptr; u32 tmp; - reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE); - tmp = ehci_readl(ehci, reg_ptr); + tmp = ehci_readl(ehci, &ehci->regs->usbmode); tmp |= USBMODE_CM_HC; /* The default byte access to MMR space is LE after * controller reset. Set the required endian mode @@ -315,7 +311,7 @@ static void tdi_reset (struct ehci_hcd *ehci) */ if (ehci_big_endian_mmio(ehci)) tmp |= USBMODE_BE; - ehci_writel(ehci, tmp, reg_ptr); + ehci_writel(ehci, tmp, &ehci->regs->usbmode); } /* reset a non-running (STS_HALT == 1) controller */ @@ -339,9 +335,8 @@ static int ehci_reset (struct ehci_hcd *ehci) if (ehci->has_hostpc) { ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS, - (u32 __iomem *)(((u8 *)ehci->regs) + USBMODE_EX)); - ehci_writel(ehci, TXFIFO_DEFAULT, - (u32 __iomem *)(((u8 *)ehci->regs) + TXFILLTUNING)); + &ehci->regs->usbmode_ex); + ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning); } if (retval) return retval; @@ -813,7 +808,7 @@ static int ehci_run (struct usb_hcd *hcd) return 0; } -static int __maybe_unused ehci_setup (struct usb_hcd *hcd) +static int ehci_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; @@ -837,6 +832,9 @@ static int __maybe_unused ehci_setup (struct usb_hcd *hcd) if (retval) return retval; + if (ehci_is_TDI(ehci)) + tdi_reset(ehci); + ehci_reset(ehci); return 0; @@ -1247,6 +1245,95 @@ static int ehci_get_frame (struct usb_hcd *hcd) } /*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* suspend/resume, section 4.3 */ + +/* These routines handle the generic parts of controller suspend/resume */ + +static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + /* + * Root hub was already suspended. Disable IRQ emission and + * mark HW unaccessible. The PM and USB cores make sure that + * the root hub is either suspended or stopped. + */ + ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); + + spin_lock_irq(&ehci->lock); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + (void) ehci_readl(ehci, &ehci->regs->intr_enable); + + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irq(&ehci->lock); + + return 0; +} + +/* Returns 0 if power was preserved, 1 if power was lost */ +static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + if (time_before(jiffies, ehci->next_statechange)) + msleep(100); + + /* Mark hardware accessible again as we are back to full power by now */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + /* + * If CF is still set and we aren't resuming from hibernation + * then we maintained suspend power. + * Just undo the effect of ehci_suspend(). + */ + if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF && + !hibernated) { + int mask = INTR_MASK; + + ehci_prepare_ports_for_controller_resume(ehci); + if (!hcd->self.root_hub->do_remote_wakeup) + mask &= ~STS_PCD; + ehci_writel(ehci, mask, &ehci->regs->intr_enable); + ehci_readl(ehci, &ehci->regs->intr_enable); + return 0; + } + + /* + * Else reset, to cope with power loss or resume from hibernation + * having let the firmware kick in during reboot. + */ + usb_root_hub_lost_power(hcd->self.root_hub); + (void) ehci_halt(ehci); + (void) ehci_reset(ehci); + + /* emptying the schedule aborts any urbs */ + spin_lock_irq(&ehci->lock); + if (ehci->reclaim) + end_unlink_async(ehci); + ehci_work(ehci); + spin_unlock_irq(&ehci->lock); + + ehci_writel(ehci, ehci->command, &ehci->regs->command); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ + + /* here we "know" root ports should always stay powered */ + ehci_port_power(ehci, 1); + + ehci->rh_state = EHCI_RH_SUSPENDED; + return 1; +} + +#endif + +/*-------------------------------------------------------------------------*/ + /* * The EHCI in ChipIdea HDRC cannot be a separate module or device, * because its registers (and irq) are shared between host/gadget/otg diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index fc9e7cc6ac9b..b3e2d66e95bb 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) ehci->owned_ports = 0; } -static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci) +static int ehci_port_change(struct ehci_hcd *ehci) { int i = HCS_N_PORTS(ehci->hcs_params); @@ -128,7 +128,7 @@ static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci) return 0; } -static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, +static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, bool suspending, bool do_wakeup) { int port; @@ -149,10 +149,8 @@ static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, if (ehci->has_hostpc) { port = HCS_N_PORTS(ehci->hcs_params); while (port--) { - u32 __iomem *hostpc_reg; + u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; - hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs - + HOSTPC0 + 4 * port); temp = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg); } @@ -185,10 +183,8 @@ static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, if (ehci->has_hostpc) { port = HCS_N_PORTS(ehci->hcs_params); while (port--) { - u32 __iomem *hostpc_reg; + u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; - hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs - + HOSTPC0 + 4 * port); temp = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg); } @@ -285,11 +281,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) port = HCS_N_PORTS(ehci->hcs_params); while (port--) { - u32 __iomem *hostpc_reg; + u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; u32 t3; - hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs - + HOSTPC0 + 4 * port); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -388,10 +382,9 @@ static int ehci_bus_resume (struct usb_hcd *hcd) i = HCS_N_PORTS(ehci->hcs_params); while (i--) { if (test_bit(i, &ehci->bus_suspended)) { - u32 __iomem *hostpc_reg; + u32 __iomem *hostpc_reg = + &ehci->regs->hostpc[i]; - hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs - + HOSTPC0 + 4 * i); temp = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg); @@ -667,7 +660,7 @@ static int ehci_hub_control ( int ports = HCS_N_PORTS (ehci->hcs_params); u32 __iomem *status_reg = &ehci->regs->port_status[ (wIndex & 0xff) - 1]; - u32 __iomem *hostpc_reg = NULL; + u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1]; u32 temp, temp1, status; unsigned long flags; int retval = 0; @@ -680,9 +673,6 @@ static int ehci_hub_control ( * power, "this is the one", etc. EHCI spec supports this. */ - if (ehci->has_hostpc) - hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs - + HOSTPC0 + 4 * ((wIndex & 0xff) - 1)); spin_lock_irqsave (&ehci->lock, flags); switch (typeReq) { case ClearHubFeature: @@ -724,7 +714,7 @@ static int ehci_hub_control ( #ifdef CONFIG_USB_OTG if ((hcd->self.otg_port == (wIndex + 1)) && hcd->self.b_hnp_enable) { - otg_start_hnp(ehci->transceiver->otg); + otg_start_hnp(hcd->phy->otg); break; } #endif @@ -734,7 +724,7 @@ static int ehci_hub_control ( goto error; /* clear phy low-power mode before resume */ - if (hostpc_reg) { + if (ehci->has_hostpc) { temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 & ~HOSTPC_PHCD, hostpc_reg); @@ -984,7 +974,7 @@ static int ehci_hub_control ( temp &= ~PORT_WKCONN_E; temp |= PORT_WKDISC_E | PORT_WKOC_E; ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); - if (hostpc_reg) { + if (ehci->has_hostpc) { spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ spin_lock_irqsave(&ehci->lock, flags); diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index c4460f3d009f..488d401942e9 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -22,14 +22,10 @@ static int ixp4xx_ehci_init(struct usb_hcd *hcd) ehci->big_endian_mmio = 1; ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 - + HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); hcd->has_tt = 1; - ehci_reset(ehci); - retval = ehci_init(hcd); + retval = ehci_setup(hcd); if (retval) return retval; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 9803a55fd5f4..17dd9e94001e 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -145,8 +145,8 @@ static int ehci_msm_probe(struct platform_device *pdev) * powering up VBUS, mapping of registers address space and power * management. */ - phy = usb_get_transceiver(); - if (!phy) { + phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(phy)) { dev_err(&pdev->dev, "unable to find transceiver\n"); ret = -ENODEV; goto unmap; @@ -169,7 +169,7 @@ static int ehci_msm_probe(struct platform_device *pdev) return 0; put_transceiver: - usb_put_transceiver(phy); + usb_put_phy(phy); unmap: iounmap(hcd->regs); put_hcd: @@ -187,7 +187,7 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); otg_set_host(phy->otg, NULL); - usb_put_transceiver(phy); + usb_put_phy(phy); usb_put_hcd(hcd); @@ -198,24 +198,11 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev) static int ehci_msm_pm_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - bool wakeup = device_may_wakeup(dev); + bool do_wakeup = device_may_wakeup(dev); dev_dbg(dev, "ehci-msm PM suspend\n"); - /* - * EHCI helper function has also the same check before manipulating - * port wakeup flags. We do check here the same condition before - * calling the same helper function to avoid bringing hardware - * from Low power mode when there is no need for adjusting port - * wakeup flags. - */ - if (hcd->self.root_hub->do_remote_wakeup && !wakeup) { - pm_runtime_resume(dev); - ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), - wakeup); - } - - return 0; + return ehci_suspend(hcd, do_wakeup); } static int ehci_msm_pm_resume(struct device *dev) @@ -223,7 +210,7 @@ static int ehci_msm_pm_resume(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); dev_dbg(dev, "ehci-msm PM resume\n"); - ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd)); + ehci_resume(hcd, false); return 0; } diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index a936bbcff8f4..f6df1ccc9617 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/otg.h> #include <linux/platform_data/mv_usb.h> @@ -76,7 +77,6 @@ static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv) static int mv_ehci_reset(struct usb_hcd *hcd) { - struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct device *dev = hcd->self.controller; struct ehci_hcd_mv *ehci_mv = dev_get_drvdata(dev); int retval; @@ -86,25 +86,13 @@ static int mv_ehci_reset(struct usb_hcd *hcd) return -ENODEV; } - /* - * data structure init - */ - retval = ehci_init(hcd); - if (retval) { - dev_err(dev, "ehci_init failed %d\n", retval); - return retval; - } - hcd->has_tt = 1; - ehci->sbrn = 0x20; - retval = ehci_reset(ehci); - if (retval) { - dev_err(dev, "ehci_reset failed %d\n", retval); - return retval; - } + retval = ehci_setup(hcd); + if (retval) + dev_err(dev, "ehci_setup failed %d\n", retval); - return 0; + return retval; } static const struct hc_driver mv_ehci_hc_driver = { @@ -247,14 +235,12 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci = hcd_to_ehci(hcd); ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs; - ehci->regs = (struct ehci_regs *) ehci_mv->op_regs; - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); ehci_mv->mode = pdata->mode; if (ehci_mv->mode == MV_USB_MODE_OTG) { #ifdef CONFIG_USB_OTG_UTILS - ehci_mv->otg = usb_get_transceiver(); - if (!ehci_mv->otg) { + ehci_mv->otg = usb_get_phy(USB_PHY_TYPE_USB2); + if (IS_ERR_OR_NULL(ehci_mv->otg)) { dev_err(&pdev->dev, "unable to find transceiver\n"); retval = -ENODEV; @@ -302,8 +288,8 @@ err_set_vbus: pdata->set_vbus(0); #ifdef CONFIG_USB_OTG_UTILS err_put_transceiver: - if (ehci_mv->otg) - usb_put_transceiver(ehci_mv->otg); + if (!IS_ERR_OR_NULL(ehci_mv->otg)) + usb_put_phy(ehci_mv->otg); #endif err_disable_clk: mv_ehci_disable(ehci_mv); @@ -331,9 +317,9 @@ static int mv_ehci_remove(struct platform_device *pdev) if (hcd->rh_registered) usb_remove_hcd(hcd); - if (ehci_mv->otg) { + if (!IS_ERR_OR_NULL(ehci_mv->otg)) { otg_set_host(ehci_mv->otg->otg, NULL); - usb_put_transceiver(ehci_mv->otg); + usb_put_phy(ehci_mv->otg); } if (ehci_mv->mode == MV_USB_MODE_HOST) { diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index c778ffe4e4e5..34201372c85f 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -42,27 +42,12 @@ static int ehci_mxc_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - hcd->has_tt = 1; - retval = ehci_halt(ehci); + retval = ehci_setup(hcd); if (retval) return retval; - /* data structure init */ - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; - - ehci_reset(ehci); - ehci_port_power(ehci, 0); return 0; } diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c index c0104882c72d..ba26957abf46 100644 --- a/drivers/usb/host/ehci-octeon.c +++ b/drivers/usb/host/ehci-octeon.c @@ -56,7 +56,7 @@ static const struct hc_driver ehci_octeon_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_init, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -150,12 +150,6 @@ static int ehci_octeon_drv_probe(struct platform_device *pdev) #endif ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - ehci_reset(ehci); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index c30435499a02..6133d93808dc 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -145,6 +145,56 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) } } +static int omap_ehci_init(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int rc; + struct ehci_hcd_omap_platform_data *pdata; + + pdata = hcd->self.controller->platform_data; + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_request_one(pdata->reset_gpio_port[0], + GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_request_one(pdata->reset_gpio_port[1], + GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + + /* Soft reset the PHY using PHY reset command over ULPI */ + if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 0); + if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 1); + + /* we know this is the memory we want, no need to ioremap again */ + ehci->caps = hcd->regs; + + rc = ehci_setup(hcd); + + if (pdata->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); + } + + /* root ports should always stay powered */ + ehci_port_power(ehci, 1); + + return rc; +} + static int omap_ehci_hub_control( struct usb_hcd *hcd, u16 typeReq, @@ -219,7 +269,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; void __iomem *regs; - struct ehci_hcd *omap_ehci; int ret = -ENODEV; int irq; int i; @@ -281,18 +330,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } - /* Hold PHYs in reset while initializing EHCI controller */ - if (pdata->phy_reset) { - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -308,49 +345,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) ehci_write(regs, EHCI_INSNREG04, EHCI_INSNREG04_DISABLE_UNSUSPEND); - /* Soft reset the PHY using PHY reset command over ULPI */ - if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(pdev, 0); - if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) - omap_ehci_soft_phy_reset(pdev, 1); - - omap_ehci = hcd_to_ehci(hcd); - omap_ehci->sbrn = 0x20; - - /* we know this is the memory we want, no need to ioremap again */ - omap_ehci->caps = hcd->regs; - omap_ehci->regs = hcd->regs - + HC_LENGTH(ehci, readl(&omap_ehci->caps->hc_capbase)); - - dbg_hcs_params(omap_ehci, "reset"); - dbg_hcc_params(omap_ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); - - ehci_reset(omap_ehci); ret = usb_add_hcd(hcd, irq, IRQF_SHARED); if (ret) { dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; + goto err_pm_runtime; } - if (pdata->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_set_value_cansleep(pdata->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); - } - - /* root ports should always stay powered */ - ehci_port_power(omap_ehci, 1); - /* get clocks */ utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); if (IS_ERR(utmi_p1_fck)) { @@ -422,8 +422,12 @@ err_utmi_p1_fck: clk_put(utmi_p1_fck); err_add_hcd: + usb_remove_hcd(hcd); + +err_pm_runtime: disable_put_regulator(pdata); pm_runtime_put_sync(dev); + usb_put_hcd(hcd); err_io: iounmap(regs); @@ -506,7 +510,7 @@ static const struct hc_driver ehci_omap_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_init, + .reset = omap_ehci_init, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 82de1073aa52..3e411230953b 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -106,21 +106,10 @@ static int ehci_orion_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; - hcd->has_tt = 1; - - retval = ehci_halt(ehci); - if (retval) - return retval; - - /* - * data structure init - */ - retval = ehci_init(hcd); + retval = ehci_setup(ehci); if (retval) return retval; - ehci_reset(ehci); - ehci_port_power(ehci, 0); return retval; @@ -261,11 +250,7 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev) ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); hcd->has_tt = 1; - ehci->sbrn = 0x20; /* * (Re-)program MBUS remapping windows if we are asked to. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 123481793a47..21e5f963f331 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -54,6 +54,17 @@ static int ehci_pci_setup(struct usb_hcd *hcd) u32 temp; int retval; + ehci->caps = hcd->regs; + + /* + * ehci_init() causes memory for DMA transfers to be + * allocated. Thus, any vendor-specific workarounds based on + * limiting the type of memory used for DMA transfers must + * happen before ehci_setup() is called. + * + * Most other workarounds can be done either before or after + * init and reset; they are located here too. + */ switch (pdev->vendor) { case PCI_VENDOR_ID_TOSHIBA_2: /* celleb's companion chip */ @@ -66,20 +77,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) #endif } break; - } - - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* ehci_init() causes memory for DMA transfers to be - * allocated. Thus, any vendor-specific workarounds based on - * limiting the type of memory used for DMA transfers must - * happen before ehci_init() is called. */ - switch (pdev->vendor) { case PCI_VENDOR_ID_NVIDIA: /* NVidia reports that certain chips don't handle * QH, ITD, or SITD addresses above 2GB. (But TD, @@ -95,61 +92,28 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci_warn(ehci, "can't enable NVidia " "workaround for >2GB RAM\n"); break; - } - break; - } - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - retval = ehci_halt(ehci); - if (retval) - return retval; - if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) || - (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) { - /* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may - * read/write memory space which does not belong to it when - * there is NULL pointer with T-bit set to 1 in the frame list - * table. To avoid the issue, the frame list link pointer - * should always contain a valid pointer to a inactive qh. + /* Some NForce2 chips have problems with selective suspend; + * fixed in newer silicon. */ - ehci->use_dummy_qh = 1; - ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI " - "dummy qh workaround\n"); - } - - /* data structure init */ - retval = ehci_init(hcd); - if (retval) - return retval; - - switch (pdev->vendor) { - case PCI_VENDOR_ID_NEC: - ehci->need_io_watchdog = 0; + case 0x0068: + if (pdev->revision < 0xa4) + ehci->no_selective_suspend = 1; + break; + } break; case PCI_VENDOR_ID_INTEL: - ehci->need_io_watchdog = 0; ehci->fs_i_thresh = 1; if (pdev->device == 0x27cc) { ehci->broken_periodic = 1; ehci_info(ehci, "using broken periodic workaround\n"); } - if (pdev->device == 0x0806 || pdev->device == 0x0811 - || pdev->device == 0x0829) { - ehci_info(ehci, "disable lpm for langwell/penwell\n"); - ehci->has_lpm = 0; - } - if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) { + if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) hcd->has_tt = 1; - tdi_reset(ehci); - } break; case PCI_VENDOR_ID_TDI: - if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { + if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) hcd->has_tt = 1; - tdi_reset(ehci); - } break; case PCI_VENDOR_ID_AMD: /* AMD PLL quirk */ @@ -161,28 +125,17 @@ static int ehci_pci_setup(struct usb_hcd *hcd) retval = -EIO; goto done; } - break; - case PCI_VENDOR_ID_NVIDIA: - switch (pdev->device) { - /* Some NForce2 chips have problems with selective suspend; - * fixed in newer silicon. - */ - case 0x0068: - if (pdev->revision < 0xa4) - ehci->no_selective_suspend = 1; - break; - /* MCP89 chips on the MacBookAir3,1 give EPROTO when - * fetching device descriptors unless LPM is disabled. - * There are also intermittent problems enumerating - * devices with PPCD enabled. + /* + * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may + * read/write memory space which does not belong to it when + * there is NULL pointer with T-bit set to 1 in the frame list + * table. To avoid the issue, the frame list link pointer + * should always contain a valid pointer to a inactive qh. */ - case 0x0d9d: - ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89"); - ehci->has_lpm = 0; - ehci->has_ppcd = 0; - ehci->command &= ~CMD_PPCEE; - break; + if (pdev->device == 0x7808) { + ehci->use_dummy_qh = 1; + ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); } break; case PCI_VENDOR_ID_VIA: @@ -203,6 +156,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* AMD PLL quirk */ if (usb_amd_find_chipset_info()) ehci->amd_pll_fix = 1; + + /* + * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may + * read/write memory space which does not belong to it when + * there is NULL pointer with T-bit set to 1 in the frame list + * table. To avoid the issue, the frame list link pointer + * should always contain a valid pointer to a inactive qh. + */ + if (pdev->device == 0x4396) { + ehci->use_dummy_qh = 1; + ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); + } /* SB600 and old version of SB700 have a bug in EHCI controller, * which causes usb devices lose response in some cases. */ @@ -231,6 +196,40 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; } + retval = ehci_setup(hcd); + if (retval) + return retval; + + /* These workarounds need to be applied after ehci_setup() */ + switch (pdev->vendor) { + case PCI_VENDOR_ID_NEC: + ehci->need_io_watchdog = 0; + break; + case PCI_VENDOR_ID_INTEL: + ehci->need_io_watchdog = 0; + if (pdev->device == 0x0806 || pdev->device == 0x0811 + || pdev->device == 0x0829) { + ehci_info(ehci, "disable lpm for langwell/penwell\n"); + ehci->has_lpm = 0; + } + break; + case PCI_VENDOR_ID_NVIDIA: + switch (pdev->device) { + /* MCP89 chips on the MacBookAir3,1 give EPROTO when + * fetching device descriptors unless LPM is disabled. + * There are also intermittent problems enumerating + * devices with PPCD enabled. + */ + case 0x0d9d: + ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89"); + ehci->has_lpm = 0; + ehci->has_ppcd = 0; + ehci->command &= ~CMD_PPCEE; + break; + } + break; + } + /* optional debug port, normally in the first BAR */ temp = pci_find_capability(pdev, 0x0a); if (temp) { @@ -238,7 +237,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) temp >>= 16; if ((temp & (3 << 13)) == (1 << 13)) { temp &= 0x1fff; - ehci->debug = ehci_to_hcd(ehci)->regs + temp; + ehci->debug = hcd->regs + temp; temp = ehci_readl(ehci, &ehci->debug->control); ehci_info(ehci, "debug port %d%s\n", HCS_DEBUG_PORT(ehci->hcs_params), @@ -250,8 +249,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } } - ehci_reset(ehci); - /* at least the Genesys GL880S needs fixup here */ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); temp &= 0x0f; @@ -275,10 +272,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } /* Serial Bus Release Number is at PCI 0x60 offset */ - pci_read_config_byte(pdev, 0x60, &ehci->sbrn); if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) - ehci->sbrn = 0x20; /* ConneXT has no sbrn register */ + ; /* ConneXT has no sbrn register */ + else + pci_read_config_byte(pdev, 0x60, &ehci->sbrn); /* Keep this around for a while just in case some EHCI * implementation uses legacy PCI PM support. This test @@ -331,29 +329,7 @@ done: static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - unsigned long flags; - int rc = 0; - - if (time_before(jiffies, ehci->next_statechange)) - msleep(10); - - /* Root hub was already suspended. Disable irq emission and - * mark HW unaccessible. The PM and USB cores make sure that - * the root hub is either suspended or stopped. - */ - ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); - spin_lock_irqsave (&ehci->lock, flags); - ehci_writel(ehci, 0, &ehci->regs->intr_enable); - (void)ehci_readl(ehci, &ehci->regs->intr_enable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - spin_unlock_irqrestore (&ehci->lock, flags); - - // could save FLADJ in case of Vaux power loss - // ... we'd only use it to handle clock skew - - return rc; + return ehci_suspend(hcd, do_wakeup); } static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) @@ -402,54 +378,8 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) if (usb_is_intel_switchable_ehci(pdev)) ehci_enable_xhci_companion(); - // maybe restore FLADJ - - if (time_before(jiffies, ehci->next_statechange)) - msleep(100); - - /* Mark hardware accessible again as we are out of D3 state by now */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - /* If CF is still set and we aren't resuming from hibernation - * then we maintained PCI Vaux power. - * Just undo the effect of ehci_pci_suspend(). - */ - if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF && - !hibernated) { - int mask = INTR_MASK; - - ehci_prepare_ports_for_controller_resume(ehci); - if (!hcd->self.root_hub->do_remote_wakeup) - mask &= ~STS_PCD; - ehci_writel(ehci, mask, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - return 0; - } - - usb_root_hub_lost_power(hcd->self.root_hub); - - /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having let BIOS kick in during reboot. - */ - (void) ehci_halt(ehci); - (void) ehci_reset(ehci); - (void) ehci_pci_reinit(ehci, pdev); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq(&ehci->lock); - if (ehci->reclaim) - end_unlink_async(ehci); - ehci_work(ehci); - spin_unlock_irq(&ehci->lock); - - ehci_writel(ehci, ehci->command, &ehci->regs->command); - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); - - ehci->rh_state = EHCI_RH_SUSPENDED; + if (ehci_resume(hcd, hibernated) != 0) + (void) ehci_pci_reinit(ehci, pdev); return 0; } #endif diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index dfe881a34ae2..4b1d896d5a22 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -153,17 +153,16 @@ static int __devexit ehci_platform_remove(struct platform_device *dev) static int ehci_platform_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - bool wakeup = device_may_wakeup(dev); + bool do_wakeup = device_may_wakeup(dev); - ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), wakeup); - return 0; + return ehci_suspend(hcd, do_wakeup); } static int ehci_platform_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd)); + ehci_resume(hcd, false); return 0; } diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c index e8d54de44acc..087aee2a904f 100644 --- a/drivers/usb/host/ehci-pmcmsp.c +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -78,27 +78,14 @@ static int ehci_msp_setup(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; + ehci->big_endian_mmio = 1; ehci->big_endian_desc = 1; ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); hcd->has_tt = 1; - retval = ehci_halt(ehci); - if (retval) - return retval; - - ehci_reset(ehci); - - /* data structure init */ - retval = ehci_init(hcd); + retval = ehci_setup(hcd); if (retval) return retval; diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index 41d11fe14252..bbbe89dfd886 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -17,24 +17,6 @@ #include <linux/of.h> #include <linux/of_platform.h> -/* called during probe() after chip reset completes */ -static int ehci_ppc_of_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_halt(ehci); - if (retval) - return retval; - - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; - return ehci_reset(ehci); -} - static const struct hc_driver ehci_ppc_of_hc_driver = { .description = hcd_name, @@ -50,7 +32,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_ppc_of_setup, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -178,11 +160,6 @@ static int __devinit ehci_hcd_ppc_of_probe(struct platform_device *op) ehci->big_endian_desc = 1; ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) { rv = ppc44x_enable_bmt(dn); diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index a20e496eb479..45a356e9f138 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -55,28 +55,12 @@ static int ps3_ehci_hc_reset(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); ehci->big_endian_mmio = 1; - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH(ehci, ehci_readl(ehci, - &ehci->caps->hc_capbase)); - - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - result = ehci_halt(ehci); + result = ehci_setup(hcd); if (result) return result; - result = ehci_init(hcd); - - if (result) - return result; - - ehci_reset(ehci); - ps3_ehci_setup_insnreg(ehci); return result; diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c index c474cec064e4..13c179fb2ee2 100644 --- a/drivers/usb/host/ehci-s5p.c +++ b/drivers/usb/host/ehci-s5p.c @@ -40,7 +40,7 @@ static const struct hc_driver s5p_ehci_hc_driver = { .irq = ehci_irq, .flags = HCD_MEMORY | HCD_USB2, - .reset = ehci_init, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -79,7 +79,8 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) return -EINVAL; } - s5p_ehci = kzalloc(sizeof(struct s5p_ehci_hcd), GFP_KERNEL); + s5p_ehci = devm_kzalloc(&pdev->dev, sizeof(struct s5p_ehci_hcd), + GFP_KERNEL); if (!s5p_ehci) return -ENOMEM; @@ -89,8 +90,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Unable to create HCD\n"); - err = -ENOMEM; - goto fail_hcd; + return -ENOMEM; } s5p_ehci->hcd = hcd; @@ -115,7 +115,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = ioremap(res->start, resource_size(res)); + hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); if (!hcd->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); err = -ENOMEM; @@ -126,7 +126,7 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); err = -ENODEV; - goto fail; + goto fail_io; } if (pdata->phy_init) @@ -134,40 +134,26 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev) ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl(&ehci->caps->hcs_params); - - ehci_reset(ehci); - err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto fail; + goto fail_io; } platform_set_drvdata(pdev, s5p_ehci); return 0; -fail: - iounmap(hcd->regs); fail_io: clk_disable(s5p_ehci->clk); fail_clken: clk_put(s5p_ehci->clk); fail_clk: usb_put_hcd(hcd); -fail_hcd: - kfree(s5p_ehci); return err; } @@ -182,13 +168,10 @@ static int __devexit s5p_ehci_remove(struct platform_device *pdev) if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); - iounmap(hcd->regs); - clk_disable(s5p_ehci->clk); clk_put(s5p_ehci->clk); usb_put_hcd(hcd); - kfree(s5p_ehci); return 0; } @@ -207,27 +190,12 @@ static int s5p_ehci_suspend(struct device *dev) { struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); struct usb_hcd *hcd = s5p_ehci->hcd; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); + bool do_wakeup = device_may_wakeup(dev); struct platform_device *pdev = to_platform_device(dev); struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; - unsigned long flags; - int rc = 0; - - if (time_before(jiffies, ehci->next_statechange)) - msleep(20); + int rc; - /* - * Root hub was already suspended. Disable irq emission and - * mark HW unaccessible. The PM and USB cores make sure that - * the root hub is either suspended or stopped. - */ - ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); - spin_lock_irqsave(&ehci->lock, flags); - ehci_writel(ehci, 0, &ehci->regs->intr_enable); - (void)ehci_readl(ehci, &ehci->regs->intr_enable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - spin_unlock_irqrestore(&ehci->lock, flags); + rc = ehci_suspend(hcd, do_wakeup); if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); @@ -241,7 +209,6 @@ static int s5p_ehci_resume(struct device *dev) { struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev); struct usb_hcd *hcd = s5p_ehci->hcd; - struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct platform_device *pdev = to_platform_device(dev); struct s5p_ehci_platdata *pdata = pdev->dev.platform_data; @@ -253,44 +220,7 @@ static int s5p_ehci_resume(struct device *dev) /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); - if (time_before(jiffies, ehci->next_statechange)) - msleep(100); - - /* Mark hardware accessible again as we are out of D3 state by now */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { - int mask = INTR_MASK; - - ehci_prepare_ports_for_controller_resume(ehci); - if (!hcd->self.root_hub->do_remote_wakeup) - mask &= ~STS_PCD; - ehci_writel(ehci, mask, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - return 0; - } - - usb_root_hub_lost_power(hcd->self.root_hub); - - (void) ehci_halt(ehci); - (void) ehci_reset(ehci); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq(&ehci->lock); - if (ehci->reclaim) - end_unlink_async(ehci); - ehci_work(ehci); - spin_unlock_irq(&ehci->lock); - - ehci_writel(ehci, ehci->command, &ehci->regs->command); - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); - - ehci->rh_state = EHCI_RH_SUSPENDED; - + ehci_resume(hcd, false); return 0; } #else diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index cc199e87a7a9..58c96bd50d22 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -160,84 +160,16 @@ static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev) static int ehci_hcd_sead3_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - unsigned long flags; - int rc = 0; - - if (time_before(jiffies, ehci->next_statechange)) - msleep(20); - - /* Root hub was already suspended. Disable irq emission and - * mark HW unaccessible. The PM and USB cores make sure that - * the root hub is either suspended or stopped. - */ - ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); - spin_lock_irqsave(&ehci->lock, flags); - ehci_writel(ehci, 0, &ehci->regs->intr_enable); - (void)ehci_readl(ehci, &ehci->regs->intr_enable); - - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - spin_unlock_irqrestore(&ehci->lock, flags); + bool do_wakeup = device_may_wakeup(dev); - /* could save FLADJ in case of Vaux power loss - * ... we'd only use it to handle clock skew - */ - - return rc; + return ehci_suspend(hcd, do_wakeup); } static int ehci_hcd_sead3_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - /* maybe restore FLADJ. */ - - if (time_before(jiffies, ehci->next_statechange)) - msleep(100); - - /* Mark hardware accessible again as we are out of D3 state by now */ - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - /* If CF is still set, we maintained PCI Vaux power. - * Just undo the effect of ehci_pci_suspend(). - */ - if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { - int mask = INTR_MASK; - - ehci_prepare_ports_for_controller_resume(ehci); - if (!hcd->self.root_hub->do_remote_wakeup) - mask &= ~STS_PCD; - ehci_writel(ehci, mask, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - return 0; - } - - ehci_dbg(ehci, "lost power, restarting\n"); - usb_root_hub_lost_power(hcd->self.root_hub); - - /* Else reset, to cope with power loss or flush-to-storage - * style "resume" having let BIOS kick in during reboot. - */ - (void) ehci_halt(ehci); - (void) ehci_reset(ehci); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq(&ehci->lock); - if (ehci->reclaim) - end_unlink_async(ehci); - ehci_work(ehci); - spin_unlock_irq(&ehci->lock); - - ehci_writel(ehci, ehci->command, &ehci->regs->command); - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); - - ehci->rh_state = EHCI_RH_SUSPENDED; + ehci_resume(hcd, false); return 0; } diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index e7cb3925abf8..b3f1e3650da0 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -24,25 +24,11 @@ static int ehci_sh_reset(struct usb_hcd *hcd) int ret; ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH(ehci, ehci_readl(ehci, - &ehci->caps->hc_capbase)); - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - ret = ehci_halt(ehci); - if (unlikely(ret)) - return ret; - - ret = ehci_init(hcd); + ret = ehci_setup(hcd); if (unlikely(ret)) return ret; - ehci->sbrn = 0x20; - - ehci_reset(ehci); ehci_port_power(ehci, 0); return ret; diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 37ba8c8d2fd0..c718a065e154 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -41,19 +41,11 @@ static int ehci_spear_setup(struct usb_hcd *hcd) /* registers start at offset 0x0 */ ehci->caps = hcd->regs; - ehci->regs = hcd->regs + HC_LENGTH(ehci, ehci_readl(ehci, - &ehci->caps->hc_capbase)); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - retval = ehci_halt(ehci); - if (retval) - return retval; - retval = ehci_init(hcd); + retval = ehci_setup(hcd); if (retval) return retval; - ehci_reset(ehci); ehci_port_power(ehci, 0); return retval; @@ -97,71 +89,16 @@ static const struct hc_driver ehci_spear_hc_driver = { static int ehci_spear_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - unsigned long flags; - int rc = 0; + bool do_wakeup = device_may_wakeup(dev); - if (time_before(jiffies, ehci->next_statechange)) - msleep(10); - - /* - * Root hub was already suspended. Disable irq emission and mark HW - * unaccessible. The PM and USB cores make sure that the root hub is - * either suspended or stopped. - */ - spin_lock_irqsave(&ehci->lock, flags); - ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); - ehci_writel(ehci, 0, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - spin_unlock_irqrestore(&ehci->lock, flags); - - return rc; + return ehci_suspend(hcd, do_wakeup); } static int ehci_spear_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - if (time_before(jiffies, ehci->next_statechange)) - msleep(100); - - if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) { - int mask = INTR_MASK; - - ehci_prepare_ports_for_controller_resume(ehci); - - if (!hcd->self.root_hub->do_remote_wakeup) - mask &= ~STS_PCD; - - ehci_writel(ehci, mask, &ehci->regs->intr_enable); - ehci_readl(ehci, &ehci->regs->intr_enable); - return 0; - } - - usb_root_hub_lost_power(hcd->self.root_hub); - - /* - * Else reset, to cope with power loss or flush-to-storage style - * "resume" having let BIOS kick in during reboot. - */ - ehci_halt(ehci); - ehci_reset(ehci); - - /* emptying the schedule aborts any urbs */ - spin_lock_irq(&ehci->lock); - if (ehci->reclaim) - end_unlink_async(ehci); - - ehci_work(ehci); - spin_unlock_irq(&ehci->lock); - - ehci_writel(ehci, ehci->command, &ehci->regs->command); - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - /* here we "know" root ports should always stay powered */ - ehci_port_power(ehci, 1); + ehci_resume(hcd, false); return 0; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 68548236ec42..f7f3ce3275b8 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -17,6 +17,7 @@ */ #include <linux/clk.h> +#include <linux/err.h> #include <linux/platform_device.h> #include <linux/platform_data/tegra_usb.h> #include <linux/irq.h> @@ -280,30 +281,14 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) /* EHCI registers start at offset 0x100 */ ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); - - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl(&ehci->caps->hcs_params); /* switch to host mode */ hcd->has_tt = 1; - ehci_reset(ehci); - retval = ehci_halt(ehci); + retval = ehci_setup(ehci); if (retval) return retval; - /* data structure init */ - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; - ehci_port_power(ehci, 1); return retval; } @@ -749,8 +734,8 @@ static int tegra_ehci_probe(struct platform_device *pdev) #ifdef CONFIG_USB_OTG_UTILS if (pdata->operating_mode == TEGRA_USB_OTG) { - tegra->transceiver = usb_get_transceiver(); - if (tegra->transceiver) + tegra->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(tegra->transceiver)) otg_set_host(tegra->transceiver->otg, &hcd->self); } #endif @@ -773,9 +758,9 @@ static int tegra_ehci_probe(struct platform_device *pdev) fail: #ifdef CONFIG_USB_OTG_UTILS - if (tegra->transceiver) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) { otg_set_host(tegra->transceiver->otg, NULL); - usb_put_transceiver(tegra->transceiver); + usb_put_phy(tegra->transceiver); } #endif tegra_usb_phy_close(tegra->phy); @@ -808,9 +793,9 @@ static int tegra_ehci_remove(struct platform_device *pdev) pm_runtime_put_noidle(&pdev->dev); #ifdef CONFIG_USB_OTG_UTILS - if (tegra->transceiver) { + if (!IS_ERR_OR_NULL(tegra->transceiver)) { otg_set_host(tegra->transceiver->otg, NULL); - usb_put_transceiver(tegra->transceiver); + usb_put_phy(tegra->transceiver); } #endif diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index c1eda73916cd..4d147c4e33f5 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -48,7 +48,7 @@ static const struct hc_driver vt8500_ehci_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_init, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -121,18 +121,6 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); - - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = readl(&ehci->caps->hcs_params); - - ehci_port_power(ehci, 1); - - ehci_reset(ehci); ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED); diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c index 3d2e26cbb34c..ec598082c14b 100644 --- a/drivers/usb/host/ehci-w90x900.c +++ b/drivers/usb/host/ehci-w90x900.c @@ -71,21 +71,14 @@ static int __devinit usb_w90x900_probe(const struct hc_driver *driver, val |= ENPHY; __raw_writel(val, ehci->regs+PHY1_CTR); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->sbrn = 0x20; - irq = platform_get_irq(pdev, 0); if (irq < 0) goto err4; - ehci_reset(ehci); - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval != 0) goto err4; - ehci_writel(ehci, 1, &ehci->regs->configured_flag); - return retval; err4: iounmap(hcd->regs); @@ -120,7 +113,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_init, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index e9713d589e30..39f24fa37ebe 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -32,30 +32,6 @@ #include <linux/of_address.h> /** - * ehci_xilinx_of_setup - Initialize the device for ehci_reset() - * @hcd: Pointer to the usb_hcd device to which the host controller bound - * - * called during probe() after chip reset completes. - */ -static int ehci_xilinx_of_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_halt(ehci); - if (retval) - return retval; - - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; - - return ehci_reset(ehci); -} - -/** * ehci_xilinx_port_handed_over - hand the port out if failed to enable it * @hcd: Pointer to the usb_hcd device to which the host controller bound * @portnum:Port number to which the device is attached. @@ -107,7 +83,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_xilinx_of_setup, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -219,11 +195,6 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) /* Debug registers are at the first 0x100 region */ ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); rv = usb_add_hcd(hcd, irq, 0); if (rv == 0) diff --git a/drivers/usb/host/ehci-xls.c b/drivers/usb/host/ehci-xls.c index 72f08196f8cd..99c353a85ae4 100644 --- a/drivers/usb/host/ehci-xls.c +++ b/drivers/usb/host/ehci-xls.c @@ -14,30 +14,11 @@ static int ehci_xls_setup(struct usb_hcd *hcd) { - int retval; struct ehci_hcd *ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - dbg_hcs_params(ehci, "reset"); - dbg_hcc_params(ehci, "reset"); - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - - retval = ehci_halt(ehci); - if (retval) - return retval; - - /* data structure init */ - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci_reset(ehci); - - return retval; + return ehci_setup(ehci); } int ehci_xls_probe_internal(const struct hc_driver *driver, diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 2694ed6558d2..85c3572155d1 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -175,10 +175,6 @@ struct ehci_hcd { /* one per controller */ #ifdef DEBUG struct dentry *debug_dir; #endif - /* - * OTG controllers and transceivers need software interaction - */ - struct usb_phy *transceiver; }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c index 6fe550049119..f238cb37305c 100644 --- a/drivers/usb/host/fhci-dbg.c +++ b/drivers/usb/host/fhci-dbg.c @@ -41,7 +41,7 @@ void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) static int fhci_dfs_regs_show(struct seq_file *s, void *v) { struct fhci_hcd *fhci = s->private; - struct fhci_regs __iomem *regs = fhci->regs; + struct qe_usb_ctlr __iomem *regs = fhci->regs; seq_printf(s, "mode: 0x%x\n" "addr: 0x%x\n" @@ -50,11 +50,11 @@ static int fhci_dfs_regs_show(struct seq_file *s, void *v) "status: 0x%x\n" "SOF timer: %d\n" "frame number: %d\n" "lines status: 0x%x\n", - in_8(®s->usb_mod), in_8(®s->usb_addr), - in_8(®s->usb_comm), in_be16(®s->usb_ep[0]), - in_be16(®s->usb_event), in_be16(®s->usb_mask), - in_8(®s->usb_status), in_be16(®s->usb_sof_tmr), - in_be16(®s->usb_frame_num), + in_8(®s->usb_usmod), in_8(®s->usb_usadr), + in_8(®s->usb_uscom), in_be16(®s->usb_usep[0]), + in_be16(®s->usb_usber), in_be16(®s->usb_usbmr), + in_8(®s->usb_usbs), in_be16(®s->usb_ussft), + in_be16(®s->usb_usfrn), fhci_ioports_check_bus_state(fhci)); return 0; diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index d2623747b489..7da1a26bed2e 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -40,8 +40,8 @@ void fhci_start_sof_timer(struct fhci_hcd *fhci) /* clear frame_n */ out_be16(&fhci->pram->frame_num, 0); - out_be16(&fhci->regs->usb_sof_tmr, 0); - setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + out_be16(&fhci->regs->usb_ussft, 0); + setbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); fhci_dbg(fhci, "<- %s\n", __func__); } @@ -50,7 +50,7 @@ void fhci_stop_sof_timer(struct fhci_hcd *fhci) { fhci_dbg(fhci, "-> %s\n", __func__); - clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + clrbits8(&fhci->regs->usb_usmod, USB_MODE_SFTE); gtm_stop_timer16(fhci->timer); fhci_dbg(fhci, "<- %s\n", __func__); @@ -58,7 +58,7 @@ void fhci_stop_sof_timer(struct fhci_hcd *fhci) u16 fhci_get_sof_timer_count(struct fhci_usb *usb) { - return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12); + return be16_to_cpu(in_be16(&usb->fhci->regs->usb_ussft) / 12); } /* initialize the endpoint zero */ @@ -88,8 +88,8 @@ void fhci_usb_enable_interrupt(struct fhci_usb *usb) enable_irq(fhci_to_hcd(fhci)->irq); /* initialize the event register and mask register */ - out_be16(&usb->fhci->regs->usb_event, 0xffff); - out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + out_be16(&usb->fhci->regs->usb_usber, 0xffff); + out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); /* enable the timer interrupts */ enable_irq(fhci->timer->irq); @@ -109,7 +109,7 @@ void fhci_usb_disable_interrupt(struct fhci_usb *usb) /* disable the usb interrupt */ disable_irq_nosync(fhci_to_hcd(fhci)->irq); - out_be16(&usb->fhci->regs->usb_mask, 0); + out_be16(&usb->fhci->regs->usb_usbmr, 0); } usb->intr_nesting_cnt++; } @@ -119,9 +119,9 @@ static u32 fhci_usb_enable(struct fhci_hcd *fhci) { struct fhci_usb *usb = fhci->usb_lld; - out_be16(&usb->fhci->regs->usb_event, 0xffff); - out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); - setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + out_be16(&usb->fhci->regs->usb_usber, 0xffff); + out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); + setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); mdelay(100); @@ -141,7 +141,7 @@ static u32 fhci_usb_disable(struct fhci_hcd *fhci) usb->port_status == FHCI_PORT_LOW) fhci_device_disconnected_interrupt(fhci); - clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); return 0; } @@ -285,13 +285,13 @@ static int fhci_usb_init(struct fhci_hcd *fhci) USB_E_IDLE_MASK | USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); - out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN); + out_8(&usb->fhci->regs->usb_usmod, USB_MODE_HOST | USB_MODE_EN); /* clearing the mask register */ - out_be16(&usb->fhci->regs->usb_mask, 0); + out_be16(&usb->fhci->regs->usb_usbmr, 0); /* initialing the event register */ - out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_usber, 0xffff); if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { fhci_usb_free(usb); @@ -745,8 +745,8 @@ static int __devinit of_fhci_probe(struct platform_device *ofdev) } /* Clear and disable any pending interrupts. */ - out_be16(&fhci->regs->usb_event, 0xffff); - out_be16(&fhci->regs->usb_mask, 0); + out_be16(&fhci->regs->usb_usber, 0xffff); + out_be16(&fhci->regs->usb_usbmr, 0); ret = usb_add_hcd(hcd, usb_irq, 0); if (ret < 0) diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index 348fe62e94f7..6af2512f8378 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -97,7 +97,7 @@ void fhci_port_disable(struct fhci_hcd *fhci) /* Enable IDLE since we want to know if something comes along */ usb->saved_msk |= USB_E_IDLE_MASK; - out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); /* check if during the disconnection process attached new device */ if (port_status == FHCI_PORT_WAITING) @@ -158,21 +158,21 @@ void fhci_port_reset(void *lld) fhci_stop_sof_timer(fhci); /* disable the USB controller */ - mode = in_8(&fhci->regs->usb_mod); - out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); + mode = in_8(&fhci->regs->usb_usmod); + out_8(&fhci->regs->usb_usmod, mode & (~USB_MODE_EN)); /* disable idle interrupts */ - mask = in_be16(&fhci->regs->usb_mask); - out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); + mask = in_be16(&fhci->regs->usb_usbmr); + out_be16(&fhci->regs->usb_usbmr, mask & (~USB_E_IDLE_MASK)); fhci_io_port_generate_reset(fhci); /* enable interrupt on this endpoint */ - out_be16(&fhci->regs->usb_mask, mask); + out_be16(&fhci->regs->usb_usbmr, mask); /* enable the USB controller */ - mode = in_8(&fhci->regs->usb_mod); - out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); + mode = in_8(&fhci->regs->usb_usmod); + out_8(&fhci->regs->usb_usmod, mode | USB_MODE_EN); fhci_start_sof_timer(fhci); fhci_dbg(fhci, "<- %s\n", __func__); diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 2df851b4bc7c..2dc8a40e39d7 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -132,8 +132,8 @@ void fhci_flush_all_transmissions(struct fhci_usb *usb) u8 mode; struct td *td; - mode = in_8(&usb->fhci->regs->usb_mod); - clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + mode = in_8(&usb->fhci->regs->usb_usmod); + clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_EN); fhci_flush_bds(usb); @@ -147,9 +147,9 @@ void fhci_flush_all_transmissions(struct fhci_usb *usb) usb->actual_frame->frame_status = FRAME_END_TRANSMISSION; /* reset the event register */ - out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_usber, 0xffff); /* enable the USB controller */ - out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); + out_8(&usb->fhci->regs->usb_usmod, mode | USB_MODE_EN); } /* @@ -414,7 +414,7 @@ static void sof_interrupt(struct fhci_hcd *fhci) usb->port_status = FHCI_PORT_FULL; /* Disable IDLE */ usb->saved_msk &= ~USB_E_IDLE_MASK; - out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); } gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false); @@ -433,14 +433,14 @@ void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci) fhci_dbg(fhci, "-> %s\n", __func__); fhci_usb_disable_interrupt(usb); - clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS); usb->port_status = FHCI_PORT_DISABLED; fhci_stop_sof_timer(fhci); /* Enable IDLE since we want to know if something comes along */ usb->saved_msk |= USB_E_IDLE_MASK; - out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION; usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION; @@ -473,7 +473,7 @@ void fhci_device_connected_interrupt(struct fhci_hcd *fhci) } usb->port_status = FHCI_PORT_LOW; - setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + setbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS); usb->vroot_hub->port.wPortStatus |= (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_CONNECTION); @@ -491,7 +491,7 @@ void fhci_device_connected_interrupt(struct fhci_hcd *fhci) } usb->port_status = FHCI_PORT_FULL; - clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + clrbits8(&usb->fhci->regs->usb_usmod, USB_MODE_LSS); usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED; usb->vroot_hub->port.wPortStatus |= @@ -535,7 +535,7 @@ static void abort_transmission(struct fhci_usb *usb) /* issue stop Tx command */ qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); /* flush Tx FIFOs */ - out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO); + out_8(&usb->fhci->regs->usb_uscom, USB_CMD_FLUSH_FIFO | EP_ZERO); udelay(1000); /* reset Tx BDs */ fhci_flush_bds(usb); @@ -555,11 +555,11 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) usb = fhci->usb_lld; - usb_er |= in_be16(&usb->fhci->regs->usb_event) & - in_be16(&usb->fhci->regs->usb_mask); + usb_er |= in_be16(&usb->fhci->regs->usb_usber) & + in_be16(&usb->fhci->regs->usb_usbmr); /* clear event bits for next time */ - out_be16(&usb->fhci->regs->usb_event, usb_er); + out_be16(&usb->fhci->regs->usb_usber, usb_er); fhci_dbg_isr(fhci, usb_er); @@ -573,7 +573,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) /* Turn on IDLE since we want to disconnect */ usb->saved_msk |= USB_E_IDLE_MASK; - out_be16(&usb->fhci->regs->usb_event, + out_be16(&usb->fhci->regs->usb_usber, usb->saved_msk); } else if (usb->port_status == FHCI_PORT_DISABLED) { if (fhci_ioports_check_bus_state(fhci) == 1) @@ -611,7 +611,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd) /* XXX usb->port_status = FHCI_PORT_WAITING; */ /* Disable IDLE */ usb->saved_msk &= ~USB_E_IDLE_MASK; - out_be16(&usb->fhci->regs->usb_mask, + out_be16(&usb->fhci->regs->usb_usbmr, usb->saved_msk); } else { fhci_dbg_isr(fhci, -1); diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index c5ed88199292..1498061f0aea 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -249,7 +249,7 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, u8 rt; /* set the endpoint registers according to the endpoint */ - out_be16(&usb->fhci->regs->usb_ep[0], + out_be16(&usb->fhci->regs->usb_usep[0], USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE); out_be16(&usb->fhci->pram->ep_ptr[0], cpm_muram_offset(ep->ep_pram_ptr)); @@ -463,7 +463,7 @@ u32 fhci_host_transaction(struct fhci_usb *usb, cq_put(&ep->conf_frame_Q, pkt); if (cq_howmany(&ep->conf_frame_Q) == 1) - out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + out_8(&usb->fhci->regs->usb_uscom, USB_CMD_STR_FIFO); return 0; } @@ -535,8 +535,8 @@ void fhci_flush_actual_frame(struct fhci_usb *usb) struct endpoint *ep = usb->ep0; /* disable the USB controller */ - mode = in_8(&usb->fhci->regs->usb_mod); - out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN); + mode = in_8(&usb->fhci->regs->usb_usmod); + out_8(&usb->fhci->regs->usb_usmod, mode & ~USB_MODE_EN); tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); td = cpm_muram_addr(tb_ptr); @@ -571,9 +571,9 @@ void fhci_flush_actual_frame(struct fhci_usb *usb) usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; /* reset the event register */ - out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_usber, 0xffff); /* enable the USB controller */ - out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); + out_8(&usb->fhci->regs->usb_usmod, mode | USB_MODE_EN); } /* handles Tx confirm and Tx error interrupt */ @@ -613,7 +613,7 @@ void fhci_host_transmit_actual_frame(struct fhci_usb *usb) /* start transmit only if we have something in the TDs */ if (in_be16(&td->status) & TD_R) - out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + out_8(&usb->fhci->regs->usb_uscom, USB_CMD_STR_FIFO); if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) { out_be32(&old_td->buf_ptr, 0); diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index dc6939a44a1a..7cc1c32dc36c 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -28,6 +28,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <asm/qe.h> +#include <asm/immap_qe.h> #define USB_CLOCK 48000000 @@ -173,25 +174,6 @@ #define USB_E_TXB_MASK 0x0002 #define USB_E_RXB_MASK 0x0001 -/* Freescale USB Host controller registers */ -struct fhci_regs { - u8 usb_mod; /* mode register */ - u8 usb_addr; /* address register */ - u8 usb_comm; /* command register */ - u8 reserved1[1]; - __be16 usb_ep[4]; /* endpoint register */ - u8 reserved2[4]; - __be16 usb_event; /* event register */ - u8 reserved3[2]; - __be16 usb_mask; /* mask register */ - u8 reserved4[1]; - u8 usb_status; /* status register */ - __be16 usb_sof_tmr; /* Start Of Frame timer */ - u8 reserved5[2]; - __be16 usb_frame_num; /* frame number register */ - u8 reserved6[1]; -}; - /* Freescale USB HOST */ struct fhci_pram { __be16 ep_ptr[4]; /* Endpoint porter reg */ @@ -267,7 +249,7 @@ struct fhci_hcd { int gpios[NUM_GPIOS]; bool alow_gpios[NUM_GPIOS]; - struct fhci_regs __iomem *regs; /* I/O memory used to communicate */ + struct qe_usb_ctlr __iomem *regs; /* I/O memory used to communicate */ struct fhci_pram __iomem *pram; /* Parameter RAM */ struct gtm_timer *timer; diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index ff471c1c165e..f19e2690c232 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1811,7 +1811,7 @@ static int imx21_remove(struct platform_device *pdev) usb_remove_hcd(hcd); if (res != NULL) { - clk_disable(imx21->clk); + clk_disable_unprepare(imx21->clk); clk_put(imx21->clk); iounmap(imx21->regs); release_mem_region(res->start, resource_size(res)); @@ -1884,7 +1884,7 @@ static int imx21_probe(struct platform_device *pdev) ret = clk_set_rate(imx21->clk, clk_round_rate(imx21->clk, 48000000)); if (ret) goto failed_clock_set; - ret = clk_enable(imx21->clk); + ret = clk_prepare_enable(imx21->clk); if (ret) goto failed_clock_enable; @@ -1900,7 +1900,7 @@ static int imx21_probe(struct platform_device *pdev) return 0; failed_add_hcd: - clk_disable(imx21->clk); + clk_disable_unprepare(imx21->clk); failed_clock_enable: failed_clock_set: clk_put(imx21->clk); diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 2909621ea196..8bcbdb5ade2d 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -87,7 +87,8 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) return -EINVAL; } - exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL); + exynos_ohci = devm_kzalloc(&pdev->dev, sizeof(struct exynos_ohci_hcd), + GFP_KERNEL); if (!exynos_ohci) return -ENOMEM; @@ -97,8 +98,7 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Unable to create HCD\n"); - err = -ENOMEM; - goto fail_hcd; + return -ENOMEM; } exynos_ohci->hcd = hcd; @@ -123,7 +123,7 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); - hcd->regs = ioremap(res->start, resource_size(res)); + hcd->regs = devm_ioremap(&pdev->dev, res->start, hcd->rsrc_len); if (!hcd->regs) { dev_err(&pdev->dev, "Failed to remap I/O memory\n"); err = -ENOMEM; @@ -134,7 +134,7 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); err = -ENODEV; - goto fail; + goto fail_io; } if (pdata->phy_init) @@ -146,23 +146,19 @@ static int __devinit exynos_ohci_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); - goto fail; + goto fail_io; } platform_set_drvdata(pdev, exynos_ohci); return 0; -fail: - iounmap(hcd->regs); fail_io: clk_disable(exynos_ohci->clk); fail_clken: clk_put(exynos_ohci->clk); fail_clk: usb_put_hcd(hcd); -fail_hcd: - kfree(exynos_ohci); return err; } @@ -177,13 +173,10 @@ static int __devexit exynos_ohci_remove(struct platform_device *pdev) if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); - iounmap(hcd->regs); - clk_disable(exynos_ohci->clk); clk_put(exynos_ohci->clk); usb_put_hcd(hcd); - kfree(exynos_ohci); return 0; } @@ -225,6 +218,9 @@ static int exynos_ohci_suspend(struct device *dev) if (pdata && pdata->phy_exit) pdata->phy_exit(pdev, S5P_USB_PHY_HOST); + + clk_disable(exynos_ohci->clk); + fail: spin_unlock_irqrestore(&ohci->lock, flags); @@ -238,6 +234,8 @@ static int exynos_ohci_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data; + clk_enable(exynos_ohci->clk); + if (pdata && pdata->phy_init) pdata->phy_init(pdev, S5P_USB_PHY_HOST); diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 1e364ec962fb..a446386bf779 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -43,16 +43,6 @@ #define USB_HOST_NEED_CLK_EN (1 << 21) #define PAD_CONTROL_LAST_DRIVEN (1 << 19) -#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4) -#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8) - -/* USB_OTG_CLK_CTRL bit defines */ -#define AHB_M_CLOCK_ON (1 << 4) -#define OTG_CLOCK_ON (1 << 3) -#define I2C_CLOCK_ON (1 << 2) -#define DEV_CLOCK_ON (1 << 1) -#define HOST_CLOCK_ON (1 << 0) - #define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ @@ -72,7 +62,9 @@ static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); -static struct clk *usb_clk; +static struct clk *usb_pll_clk; +static struct clk *usb_dev_clk; +static struct clk *usb_otg_clk; static void isp1301_configure_pnx4008(void) { @@ -249,8 +241,6 @@ static const struct hc_driver ohci_nxp_hc_driver = { .start_port_reset = ohci_start_port_reset, }; -#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON) - static void nxp_set_usb_bits(void) { if (machine_is_pnx4008()) { @@ -327,41 +317,63 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) /* Enable AHB slave USB clock, needed for further USB clock control */ __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); - isp1301_configure(); - /* Enable USB PLL */ - usb_clk = clk_get(&pdev->dev, "ck_pll5"); - if (IS_ERR(usb_clk)) { + usb_pll_clk = clk_get(&pdev->dev, "ck_pll5"); + if (IS_ERR(usb_pll_clk)) { dev_err(&pdev->dev, "failed to acquire USB PLL\n"); - ret = PTR_ERR(usb_clk); + ret = PTR_ERR(usb_pll_clk); goto out1; } - ret = clk_enable(usb_clk); + ret = clk_enable(usb_pll_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to start USB PLL\n"); goto out2; } - ret = clk_set_rate(usb_clk, 48000); + ret = clk_set_rate(usb_pll_clk, 48000); if (ret < 0) { dev_err(&pdev->dev, "failed to set USB clock rate\n"); goto out3; } + /* Enable USB device clock */ + usb_dev_clk = clk_get(&pdev->dev, "ck_usbd"); + if (IS_ERR(usb_dev_clk)) { + dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); + ret = PTR_ERR(usb_dev_clk); + goto out4; + } + + ret = clk_enable(usb_dev_clk); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); + goto out5; + } + + /* Enable USB otg clocks */ + usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); + if (IS_ERR(usb_otg_clk)) { + dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); + ret = PTR_ERR(usb_dev_clk); + goto out6; + } + __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); - /* Set to enable all needed USB clocks */ - __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL); + ret = clk_enable(usb_otg_clk); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); + goto out7; + } - while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) != - USB_CLOCK_MASK) ; + isp1301_configure(); hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); if (!hcd) { dev_err(&pdev->dev, "Failed to allocate HC buffer\n"); ret = -ENOMEM; - goto out3; + goto out8; } /* Set all USB bits in the Start Enable register */ @@ -371,14 +383,14 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) if (!res) { dev_err(&pdev->dev, "Failed to get MEM resource\n"); ret = -ENOMEM; - goto out4; + goto out8; } hcd->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hcd->regs) { dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n"); ret = -ENOMEM; - goto out4; + goto out8; } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); @@ -386,7 +398,7 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENXIO; - goto out4; + goto out8; } nxp_start_hc(); @@ -400,13 +412,21 @@ static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev) return ret; nxp_stop_hc(); -out4: +out8: nxp_unset_usb_bits(); usb_put_hcd(hcd); +out7: + clk_disable(usb_otg_clk); +out6: + clk_put(usb_otg_clk); +out5: + clk_disable(usb_dev_clk); +out4: + clk_put(usb_dev_clk); out3: - clk_disable(usb_clk); + clk_disable(usb_pll_clk); out2: - clk_put(usb_clk); + clk_put(usb_pll_clk); out1: isp1301_i2c_client = NULL; out: @@ -422,8 +442,10 @@ static int usb_hcd_nxp_remove(struct platform_device *pdev) release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); nxp_unset_usb_bits(); - clk_disable(usb_clk); - clk_put(usb_clk); + clk_disable(usb_pll_clk); + clk_put(usb_pll_clk); + clk_disable(usb_dev_clk); + clk_put(usb_dev_clk); i2c_unregister_device(isp1301_i2c_client); isp1301_i2c_client = NULL; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 9ce35d0d9d5d..076d2018e6df 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -18,6 +18,7 @@ #include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/gpio.h> #include <mach/hardware.h> @@ -167,14 +168,15 @@ static int omap_1510_local_bus_init(void) static void start_hnp(struct ohci_hcd *ohci) { - const unsigned port = ohci_to_hcd(ohci)->self.otg_port - 1; + struct usb_hcd *hcd = ohci_to_hcd(ohci); + const unsigned port = hcd->self.otg_port - 1; unsigned long flags; u32 l; - otg_start_hnp(ohci->transceiver->otg); + otg_start_hnp(hcd->phy->otg); local_irq_save(flags); - ohci->transceiver->state = OTG_STATE_A_SUSPEND; + hcd->phy->state = OTG_STATE_A_SUSPEND; writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]); l = omap_readl(OTG_CTRL); l &= ~OTG_A_BUSREQ; @@ -211,18 +213,18 @@ static int ohci_omap_init(struct usb_hcd *hcd) #ifdef CONFIG_USB_OTG if (need_transceiver) { - ohci->transceiver = usb_get_transceiver(); - if (ohci->transceiver) { - int status = otg_set_host(ohci->transceiver->otg, + hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2); + if (!IS_ERR_OR_NULL(hcd->phy)) { + int status = otg_set_host(hcd->phy->otg, &ohci_to_hcd(ohci)->self); - dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n", - ohci->transceiver->label, status); + dev_dbg(hcd->self.controller, "init %s phy, status %d\n", + hcd->phy->label, status); if (status) { - usb_put_transceiver(ohci->transceiver); + usb_put_phy(hcd->phy); return status; } } else { - dev_err(hcd->self.controller, "can't find transceiver\n"); + dev_err(hcd->self.controller, "can't find phy\n"); return -ENODEV; } ohci->start_hnp = start_hnp; @@ -403,9 +405,9 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) struct ohci_hcd *ohci = hcd_to_ohci (hcd); usb_remove_hcd(hcd); - if (ohci->transceiver) { - (void) otg_set_host(ohci->transceiver->otg, 0); - usb_put_transceiver(ohci->transceiver); + if (!IS_ERR_OR_NULL(hcd->phy)) { + (void) otg_set_host(hcd->phy->otg, 0); + usb_put_phy(hcd->phy); } if (machine_is_omap_osk()) gpio_free(9); diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 1b19aea25a2b..d3299143d9e2 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -372,11 +372,6 @@ struct ohci_hcd { struct ed *ed_controltail; /* last in ctrl list */ struct ed *periodic [NUM_INTS]; /* shadow int_table */ - /* - * OTG controllers and transceivers need software interaction; - * other external transceivers should be software-transparent - */ - struct usb_phy *transceiver; void (*start_hnp)(struct ohci_hcd *ohci); /* diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index a979cd0dbe0f..7648b2d4b268 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4450,6 +4450,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) /* Accept arbitrarily long scatter-gather lists */ hcd->self.sg_tablesize = ~0; + /* XHCI controllers don't stop the ep queue on short packets :| */ + hcd->self.no_stop_on_short = 1; if (usb_hcd_is_primary_hcd(hcd)) { xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); |