Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt/PHY driver updates from Greg KH:
 "Here is the big USB and Thunderbolt and PHY driver updates for
  5.6-rc1.

  With the advent of USB4, "Thunderbolt" has really become USB4, so the
  renaming of the Kconfig option and starting to share subsystem code
  has begun, hence both subsystems coming in through the same tree here.

  PHY driver updates also touched USB drivers, so that is coming in
  through here as well.

  Major stuff included in here are:
   - USB 4 initial support added (i.e. Thunderbolt)
   - musb driver updates
   - USB gadget driver updates
   - PHY driver updates
   - USB PHY driver updates
   - lots of USB serial stuff fixed up
   - USB typec updates
   - USB-IP fixes
   - lots of other smaller USB driver updates

  All of these have been in linux-next for a while now (the usb-serial
  tree is already tested in linux-next on its own before merged into
  here), with no reported issues"

[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
  that causes configuration warnings    - Linus ]

* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  Doc: ABI: add usb charger uevent
  usb: phy: show USB charger type for user
  usb: cdns3: fix spelling mistake and rework grammar in text
  usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
  USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
  USB: serial: ir-usb: simplify endpoint check
  USB: serial: ir-usb: make set_termios synchronous
  USB: serial: ir-usb: fix IrLAP framing
  USB: serial: ir-usb: fix link-speed handling
  USB: serial: ir-usb: add missing endpoint sanity check
  usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
  usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
  usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
  usb: typec: tcpci: mask event interrupts when remove driver
  usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
  usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
  usb: chipidea: handle single role for usb role class
  usb: musb: fix spelling mistake: "periperal" -> "peripheral"
  phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
  USB: usbfs: Always unlink URBs in reverse order
  ...

9 files changed, 437 insertions, 128 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8d730180db06..55bdfdf11e4c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -186,7 +186,7 @@ config USB_EHCI_FSL
 
 config USB_EHCI_MXC
 	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
-	depends on ARCH_MXC
+	depends on ARCH_MXC || COMPILE_TEST
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
@@ -210,8 +210,8 @@ config USB_EHCI_HCD_OMAP
 
 config USB_EHCI_HCD_ORION
 	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
-	depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU)
-	default y
+	depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
+	default y if (PLAT_ORION || ARCH_MVEBU)
 	---help---
 	  Enables support for the on-chip EHCI controller on Marvell's
 	  embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
@@ -221,15 +221,15 @@ config USB_EHCI_HCD_ORION
 
 config USB_EHCI_HCD_SPEAR
 	tristate "Support for ST SPEAr on-chip EHCI USB controller"
-	depends on USB_EHCI_HCD && PLAT_SPEAR
-	default y
+	depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
+	default y if PLAT_SPEAR
 	---help---
 	  Enables support for the on-chip EHCI controller on
 	  ST SPEAr chips.
 
 config USB_EHCI_HCD_STI
 	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
-	depends on ARCH_STI && OF
+	depends on (ARCH_STI || COMPILE_TEST) && OF
 	select GENERIC_PHY
 	select USB_EHCI_HCD_PLATFORM
 	help
@@ -238,8 +238,8 @@ config USB_EHCI_HCD_STI
 
 config USB_EHCI_HCD_AT91
 	tristate  "Support for Atmel on-chip EHCI USB controller"
-	depends on USB_EHCI_HCD && ARCH_AT91
-	default y
+	depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
+	default y if ARCH_AT91
 	---help---
 	  Enables support for the on-chip EHCI controller on
 	  Atmel chips.
@@ -263,20 +263,20 @@ config USB_EHCI_HCD_PPC_OF
 
 config USB_EHCI_SH
 	bool "EHCI support for SuperH USB controller"
-	depends on SUPERH
+	depends on SUPERH || COMPILE_TEST
 	---help---
 	  Enables support for the on-chip EHCI controller on the SuperH.
 	  If you use the PCI EHCI controller, this option is not necessary.
 
 config USB_EHCI_EXYNOS
-	tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
-	depends on ARCH_S5PV210 || ARCH_EXYNOS
+	tristate "EHCI support for Samsung S5P/Exynos SoC Series"
+	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	help
 	  Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
 
 config USB_EHCI_MV
 	tristate "EHCI support for Marvell PXA/MMP USB controller"
-	depends on (ARCH_PXA || ARCH_MMP)
+	depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
 	  Enables support for Marvell (including PXA and MMP series) on-chip
@@ -289,7 +289,7 @@ config USB_EHCI_MV
 
 config USB_CNS3XXX_EHCI
 	bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
-	depends on ARCH_CNS3XXX
+	depends on ARCH_CNS3XXX || COMPILE_TEST
 	select USB_EHCI_HCD_PLATFORM
 	---help---
 	  This option is deprecated now and the driver was removed, use
@@ -410,15 +410,15 @@ config USB_OHCI_HCD_OMAP1
 
 config USB_OHCI_HCD_SPEAR
 	tristate "Support for ST SPEAr on-chip OHCI USB controller"
-	depends on USB_OHCI_HCD && PLAT_SPEAR
-	default y
+	depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
+	default y if PLAT_SPEAR
 	---help---
 	  Enables support for the on-chip OHCI controller on
 	  ST SPEAr chips.
 
 config USB_OHCI_HCD_STI
 	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
-	depends on ARCH_STI && OF
+	depends on (ARCH_STI || COMPILE_TEST) && OF
 	select GENERIC_PHY
 	select USB_OHCI_HCD_PLATFORM
 	help
@@ -427,8 +427,8 @@ config USB_OHCI_HCD_STI
 
 config USB_OHCI_HCD_S3C2410
 	tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
-	depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
-	default y
+	depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX || COMPILE_TEST)
+	default y if (ARCH_S3C24XX || ARCH_S3C64XX)
 	---help---
 	  Enables support for the on-chip OHCI controller on
 	  S3C24xx/S3C64xx chips.
@@ -453,17 +453,17 @@ config USB_OHCI_HCD_PXA27X
 
 config USB_OHCI_HCD_AT91
 	tristate "Support for Atmel on-chip OHCI USB controller"
-	depends on USB_OHCI_HCD && ARCH_AT91 && OF
-	default y
+	depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
+	default y if ARCH_AT91
 	---help---
 	  Enables support for the on-chip OHCI controller on
 	  Atmel chips.
 
 config USB_OHCI_HCD_OMAP3
 	tristate "OHCI support for OMAP3 and later chips"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
+	depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
 	select USB_OHCI_HCD_PLATFORM
-	default y
+	default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
 	help
 	  This option is deprecated now and the driver was removed, use
 	  USB_OHCI_HCD_PLATFORM instead.
@@ -473,10 +473,10 @@ config USB_OHCI_HCD_OMAP3
 
 config USB_OHCI_HCD_DAVINCI
 	tristate "OHCI support for TI DaVinci DA8xx"
-	depends on ARCH_DAVINCI_DA8XX
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
 	depends on USB_OHCI_HCD
 	select PHY_DA8XX_USB
-	default y
+	default y if ARCH_DAVINCI_DA8XX
 	help
 	  Enables support for the DaVinci DA8xx integrated OHCI
 	  controller. This driver cannot currently be a loadable
@@ -532,7 +532,7 @@ config USB_OHCI_HCD_SSB
 
 config USB_OHCI_SH
 	bool "OHCI support for SuperH USB controller (DEPRECATED)"
-	depends on SUPERH
+	depends on SUPERH || COMPILE_TEST
 	select USB_OHCI_HCD_PLATFORM
 	---help---
 	  This option is deprecated now and the driver was removed, use
@@ -542,14 +542,14 @@ config USB_OHCI_SH
 	  If you use the PCI OHCI controller, this option is not necessary.
 
 config USB_OHCI_EXYNOS
-	tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
-	depends on ARCH_S5PV210 || ARCH_EXYNOS
+	tristate "OHCI support for Samsung S5P/Exynos SoC Series"
+	depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	help
 	  Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
 
 config USB_CNS3XXX_OHCI
 	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
-	depends on ARCH_CNS3XXX
+	depends on ARCH_CNS3XXX || COMPILE_TEST
 	select USB_OHCI_HCD_PLATFORM
 	---help---
 	  This option is deprecated now and the driver was removed, use
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 01debfd03d4a..a4e9abcbdc4f 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * SAMSUNG EXYNOS USB HOST EHCI Controller
+ * Samsung Exynos USB HOST EHCI Controller
  *
  * Copyright (C) 2011 Samsung Electronics Co.Ltd
  * Author: Jingoo Han <jg1.han@samsung.com>
@@ -21,7 +21,7 @@
 
 #include "ehci.h"
 
-#define DRIVER_DESC "EHCI EXYNOS driver"
+#define DRIVER_DESC "EHCI Exynos driver"
 
 #define EHCI_INSNREG00(base)			(base + 0x90)
 #define EHCI_INSNREG00_ENA_INCR16		(0x1 << 25)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 66ec1fdf9fe7..bd4f6ef534d9 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -11,6 +11,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/of.h>
 #include <linux/platform_data/mv_usb.h>
 #include <linux/io.h>
 
@@ -67,6 +68,8 @@ static int mv_ehci_reset(struct usb_hcd *hcd)
 {
 	struct device *dev = hcd->self.controller;
 	struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 status;
 	int retval;
 
 	if (ehci_mv == NULL) {
@@ -80,6 +83,14 @@ static int mv_ehci_reset(struct usb_hcd *hcd)
 	if (retval)
 		dev_err(dev, "ehci_setup failed %d\n", retval);
 
+	if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) {
+		status = ehci_readl(ehci, &ehci->regs->port_status[0]);
+		status |= PORT_TEST_FORCE;
+		ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+		status &= ~PORT_TEST_FORCE;
+		ehci_writel(ehci, status, &ehci->regs->port_status[0]);
+	}
+
 	return retval;
 }
 
@@ -116,7 +127,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		ehci_mv->set_vbus = pdata->set_vbus;
 	}
 
-	ehci_mv->phy = devm_phy_get(&pdev->dev, "usb");
+	ehci_mv->phy = devm_phy_optional_get(&pdev->dev, "usb");
 	if (IS_ERR(ehci_mv->phy)) {
 		retval = PTR_ERR(ehci_mv->phy);
 		if (retval != -EPROBE_DEFER)
@@ -164,7 +175,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	}
 
 	ehci = hcd_to_ehci(hcd);
-	ehci->caps = (struct ehci_caps *) ehci_mv->cap_regs;
+	ehci->caps = (struct ehci_caps __iomem *) ehci_mv->cap_regs;
 
 	if (ehci_mv->mode == MV_USB_MODE_OTG) {
 		ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
@@ -246,10 +257,8 @@ static int mv_ehci_remove(struct platform_device *pdev)
 MODULE_ALIAS("mv-ehci");
 
 static const struct platform_device_id ehci_id_table[] = {
-	{"pxa-u2oehci", PXA_U2OEHCI},
-	{"pxa-sph", PXA_SPH},
-	{"mmp3-hsic", MMP3_HSIC},
-	{"mmp3-fsic", MMP3_FSIC},
+	{"pxa-u2oehci", 0},
+	{"pxa-sph", 0},
 	{},
 };
 
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
index 2afde14dc425..c25c51d26f26 100644
--- a/drivers/usb/host/ehci-sh.c
+++ b/drivers/usb/host/ehci-sh.c
@@ -8,7 +8,6 @@
  */
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <linux/platform_data/ehci-sh.h>
 
 struct ehci_sh_priv {
 	struct clk *iclk, *fclk;
@@ -76,7 +75,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct ehci_sh_priv *priv;
-	struct ehci_sh_platdata *pdata;
 	struct usb_hcd *hcd;
 	int irq, ret;
 
@@ -89,8 +87,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 		goto fail_create_hcd;
 	}
 
-	pdata = dev_get_platdata(&pdev->dev);
-
 	/* initialize hcd */
 	hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
 			     dev_name(&pdev->dev));
@@ -127,9 +123,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev)
 	clk_enable(priv->fclk);
 	clk_enable(priv->iclk);
 
-	if (pdata && pdata->phy_init)
-		pdata->phy_init();
-
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "Failed to add hcd");
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 4d2cdec4cb78..d6433f206c17 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -42,12 +42,10 @@ struct tegra_ehci_soc_config {
 };
 
 struct tegra_ehci_hcd {
-	struct tegra_usb_phy *phy;
 	struct clk *clk;
 	struct reset_control *rst;
 	int port_resuming;
 	bool needs_double_reset;
-	enum tegra_usb_phy_port_speed port_speed;
 };
 
 static int tegra_reset_usb_controller(struct platform_device *pdev)
@@ -480,12 +478,6 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	}
 	u_phy->otg->host = hcd_to_bus(hcd);
 
-	err = usb_phy_set_suspend(hcd->usb_phy, 0);
-	if (err) {
-		dev_err(&pdev->dev, "Failed to power on the phy\n");
-		goto cleanup_phy;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (!irq) {
 		dev_err(&pdev->dev, "Failed to get IRQ\n");
@@ -521,16 +513,10 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 	struct tegra_ehci_hcd *tegra =
 		(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
 
+	usb_remove_hcd(hcd);
 	otg_set_host(hcd->usb_phy->otg, NULL);
-
 	usb_phy_shutdown(hcd->usb_phy);
-	usb_remove_hcd(hcd);
-
-	reset_control_assert(tegra->rst);
-	udelay(1);
-
 	clk_disable_unprepare(tegra->clk);
-
 	usb_put_hcd(hcd);
 
 	return 0;
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index d5ce98e205c7..bd40e597f256 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -19,7 +19,7 @@
 
 #include "ohci.h"
 
-#define DRIVER_DESC "OHCI EXYNOS driver"
+#define DRIVER_DESC "OHCI Exynos driver"
 
 static const char hcd_name[] = "ohci-exynos";
 static struct hc_driver __read_mostly exynos_ohci_hc_driver;
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index fe09b8626329..120666a0d590 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2783,11 +2783,15 @@ static void ehci_port_power(struct oxu_hcd *oxu, int is_on)
 		return;
 
 	oxu_dbg(oxu, "...power%s ports...\n", is_on ? "up" : "down");
-	for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; )
-		(void) oxu_hub_control(oxu_to_hcd(oxu),
-				is_on ? SetPortFeature : ClearPortFeature,
-				USB_PORT_FEAT_POWER,
-				port--, NULL, 0);
+	for (port = HCS_N_PORTS(oxu->hcs_params); port > 0; ) {
+		if (is_on)
+			oxu_hub_control(oxu_to_hcd(oxu), SetPortFeature,
+				USB_PORT_FEAT_POWER, port--, NULL, 0);
+		else
+			oxu_hub_control(oxu_to_hcd(oxu), ClearPortFeature,
+				USB_PORT_FEAT_POWER, port--, NULL, 0);
+	}
+
 	msleep(20);
 }
 
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b18a6baef204..bfbdb3ceed29 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -488,11 +488,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
-	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
-	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-	if (ret)
-		goto disable_clk;
-
 	hcd = usb_create_hcd(driver, dev, dev_name(dev));
 	if (!hcd) {
 		ret = -ENOMEM;
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index bf9065438320..8163aefc6c6b 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -11,6 +11,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/firmware.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -38,7 +39,15 @@
 #define XUSB_CFG_4				0x010
 #define  XUSB_BASE_ADDR_SHIFT			15
 #define  XUSB_BASE_ADDR_MASK			0x1ffff
+#define XUSB_CFG_16				0x040
+#define XUSB_CFG_24				0x060
+#define XUSB_CFG_AXI_CFG			0x0f8
 #define XUSB_CFG_ARU_C11_CSBRANGE		0x41c
+#define XUSB_CFG_ARU_CONTEXT			0x43c
+#define XUSB_CFG_ARU_CONTEXT_HS_PLS		0x478
+#define XUSB_CFG_ARU_CONTEXT_FS_PLS		0x47c
+#define XUSB_CFG_ARU_CONTEXT_HSFS_SPEED		0x480
+#define XUSB_CFG_ARU_CONTEXT_HSFS_PP		0x484
 #define XUSB_CFG_CSB_BASE_ADDR			0x800
 
 /* FPCI mailbox registers */
@@ -62,11 +71,20 @@
 #define  MBOX_SMI_INTR_EN			BIT(3)
 
 /* IPFS registers */
+#define IPFS_XUSB_HOST_MSI_BAR_SZ_0		0x0c0
+#define IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0		0x0c4
+#define IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0	0x0c8
+#define IPFS_XUSB_HOST_MSI_VEC0_0		0x100
+#define IPFS_XUSB_HOST_MSI_EN_VEC0_0		0x140
 #define IPFS_XUSB_HOST_CONFIGURATION_0		0x180
 #define  IPFS_EN_FPCI				BIT(0)
+#define IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0	0x184
 #define IPFS_XUSB_HOST_INTR_MASK_0		0x188
 #define  IPFS_IP_INT_MASK			BIT(16)
+#define IPFS_XUSB_HOST_INTR_ENABLE_0		0x198
+#define IPFS_XUSB_HOST_UFPCI_CONFIG_0		0x19c
 #define IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0	0x1bc
+#define IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0		0x1dc
 
 #define CSB_PAGE_SELECT_MASK			0x7fffff
 #define CSB_PAGE_SELECT_SHIFT			9
@@ -101,6 +119,8 @@
 #define  L2IMEMOP_ACTION_SHIFT			24
 #define  L2IMEMOP_INVALIDATE_ALL		(0x40 << L2IMEMOP_ACTION_SHIFT)
 #define  L2IMEMOP_LOAD_LOCKED_RESULT		(0x11 << L2IMEMOP_ACTION_SHIFT)
+#define XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT	0x101a18
+#define  L2IMEMOP_RESULT_VLD			BIT(31)
 #define XUSB_CSB_MP_APMAP			0x10181c
 #define  APMAP_BOOTPATH				BIT(31)
 
@@ -145,19 +165,32 @@ struct tegra_xusb_phy_type {
 	unsigned int num;
 };
 
-struct tega_xusb_mbox_regs {
+struct tegra_xusb_mbox_regs {
 	u16 cmd;
 	u16 data_in;
 	u16 data_out;
 	u16 owner;
 };
 
+struct tegra_xusb_context_soc {
+	struct {
+		const unsigned int *offsets;
+		unsigned int num_offsets;
+	} ipfs;
+
+	struct {
+		const unsigned int *offsets;
+		unsigned int num_offsets;
+	} fpci;
+};
+
 struct tegra_xusb_soc {
 	const char *firmware;
 	const char * const *supply_names;
 	unsigned int num_supplies;
 	const struct tegra_xusb_phy_type *phy_types;
 	unsigned int num_types;
+	const struct tegra_xusb_context_soc *context;
 
 	struct {
 		struct {
@@ -166,12 +199,17 @@ struct tegra_xusb_soc {
 		} usb2, ulpi, hsic, usb3;
 	} ports;
 
-	struct tega_xusb_mbox_regs mbox;
+	struct tegra_xusb_mbox_regs mbox;
 
 	bool scale_ss_clock;
 	bool has_ipfs;
 };
 
+struct tegra_xusb_context {
+	u32 *ipfs;
+	u32 *fpci;
+};
+
 struct tegra_xusb {
 	struct device *dev;
 	void __iomem *regs;
@@ -218,6 +256,8 @@ struct tegra_xusb {
 		void *virt;
 		dma_addr_t phys;
 	} fw;
+
+	struct tegra_xusb_context context;
 };
 
 static struct hc_driver __read_mostly tegra_xhci_hc_driver;
@@ -623,9 +663,9 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void tegra_xusb_config(struct tegra_xusb *tegra,
-			      struct resource *regs)
+static void tegra_xusb_config(struct tegra_xusb *tegra)
 {
+	u32 regs = tegra->hcd->rsrc_start;
 	u32 value;
 
 	if (tegra->soc->has_ipfs) {
@@ -639,7 +679,7 @@ static void tegra_xusb_config(struct tegra_xusb *tegra,
 	/* Program BAR0 space */
 	value = fpci_readl(tegra, XUSB_CFG_4);
 	value &= ~(XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
-	value |= regs->start & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
+	value |= regs & (XUSB_BASE_ADDR_MASK << XUSB_BASE_ADDR_SHIFT);
 	fpci_writel(tegra, value, XUSB_CFG_4);
 
 	usleep_range(100, 200);
@@ -793,17 +833,34 @@ disable_clk:
 	return err;
 }
 
-static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
+#ifdef CONFIG_PM_SLEEP
+static int tegra_xusb_init_context(struct tegra_xusb *tegra)
+{
+	const struct tegra_xusb_context_soc *soc = tegra->soc->context;
+
+	tegra->context.ipfs = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets,
+					   sizeof(u32), GFP_KERNEL);
+	if (!tegra->context.ipfs)
+		return -ENOMEM;
+
+	tegra->context.fpci = devm_kcalloc(tegra->dev, soc->ipfs.num_offsets,
+					   sizeof(u32), GFP_KERNEL);
+	if (!tegra->context.fpci)
+		return -ENOMEM;
+
+	return 0;
+}
+#else
+static inline int tegra_xusb_init_context(struct tegra_xusb *tegra)
+{
+	return 0;
+}
+#endif
+
+static int tegra_xusb_request_firmware(struct tegra_xusb *tegra)
 {
-	unsigned int code_tag_blocks, code_size_blocks, code_blocks;
 	struct tegra_xusb_fw_header *header;
-	struct device *dev = tegra->dev;
 	const struct firmware *fw;
-	unsigned long timeout;
-	time64_t timestamp;
-	struct tm time;
-	u64 address;
-	u32 value;
 	int err;
 
 	err = request_firmware(&fw, tegra->soc->firmware, tegra->dev);
@@ -828,6 +885,26 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
 	memcpy(tegra->fw.virt, fw->data, tegra->fw.size);
 	release_firmware(fw);
 
+	return 0;
+}
+
+static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
+{
+	unsigned int code_tag_blocks, code_size_blocks, code_blocks;
+	struct xhci_cap_regs __iomem *cap = tegra->regs;
+	struct tegra_xusb_fw_header *header;
+	struct device *dev = tegra->dev;
+	struct xhci_op_regs __iomem *op;
+	unsigned long timeout;
+	time64_t timestamp;
+	struct tm time;
+	u64 address;
+	u32 value;
+	int err;
+
+	header = (struct tegra_xusb_fw_header *)tegra->fw.virt;
+	op = tegra->regs + HC_LENGTH(readl(&cap->hc_capbase));
+
 	if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) {
 		dev_info(dev, "Firmware already loaded, Falcon state %#x\n",
 			 csb_readl(tegra, XUSB_FALC_CPUCTL));
@@ -882,26 +959,37 @@ static int tegra_xusb_load_firmware(struct tegra_xusb *tegra)
 
 	csb_writel(tegra, 0, XUSB_FALC_DMACTL);
 
-	msleep(50);
+	/* wait for RESULT_VLD to get set */
+#define tegra_csb_readl(offset) csb_readl(tegra, offset)
+	err = readx_poll_timeout(tegra_csb_readl,
+				 XUSB_CSB_MEMPOOL_L2IMEMOP_RESULT, value,
+				 value & L2IMEMOP_RESULT_VLD, 100, 10000);
+	if (err < 0) {
+		dev_err(dev, "DMA controller not ready %#010x\n", value);
+		return err;
+	}
+#undef tegra_csb_readl
 
 	csb_writel(tegra, le32_to_cpu(header->boot_codetag),
 		   XUSB_FALC_BOOTVEC);
 
-	/* Boot Falcon CPU and wait for it to enter the STOPPED (idle) state. */
-	timeout = jiffies + msecs_to_jiffies(5);
-
+	/* Boot Falcon CPU and wait for USBSTS_CNR to get cleared. */
 	csb_writel(tegra, CPUCTL_STARTCPU, XUSB_FALC_CPUCTL);
 
-	while (time_before(jiffies, timeout)) {
-		if (csb_readl(tegra, XUSB_FALC_CPUCTL) == CPUCTL_STATE_STOPPED)
+	timeout = jiffies + msecs_to_jiffies(200);
+
+	do {
+		value = readl(&op->status);
+		if ((value & STS_CNR) == 0)
 			break;
 
-		usleep_range(100, 200);
-	}
+		usleep_range(1000, 2000);
+	} while (time_is_after_jiffies(timeout));
 
-	if (csb_readl(tegra, XUSB_FALC_CPUCTL) != CPUCTL_STATE_STOPPED) {
-		dev_err(dev, "Falcon failed to start, state: %#x\n",
-			csb_readl(tegra, XUSB_FALC_CPUCTL));
+	value = readl(&op->status);
+	if (value & STS_CNR) {
+		value = csb_readl(tegra, XUSB_FALC_CPUCTL);
+		dev_err(dev, "XHCI controller not read: %#010x\n", value);
 		return -EIO;
 	}
 
@@ -966,11 +1054,37 @@ static int tegra_xusb_powerdomain_init(struct device *dev,
 	return 0;
 }
 
-static int tegra_xusb_probe(struct platform_device *pdev)
+static int __tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra)
 {
 	struct tegra_xusb_mbox_msg msg;
-	struct resource *regs;
+	int err;
+
+	/* Enable firmware messages from controller. */
+	msg.cmd = MBOX_CMD_MSG_ENABLED;
+	msg.data = 0;
+
+	err = tegra_xusb_mbox_send(tegra, &msg);
+	if (err < 0)
+		dev_err(tegra->dev, "failed to enable messages: %d\n", err);
+
+	return err;
+}
+
+static int tegra_xusb_enable_firmware_messages(struct tegra_xusb *tegra)
+{
+	int err;
+
+	mutex_lock(&tegra->lock);
+	err = __tegra_xusb_enable_firmware_messages(tegra);
+	mutex_unlock(&tegra->lock);
+
+	return err;
+}
+
+static int tegra_xusb_probe(struct platform_device *pdev)
+{
 	struct tegra_xusb *tegra;
+	struct resource *regs;
 	struct xhci_hcd *xhci;
 	unsigned int i, j, k;
 	struct phy *phy;
@@ -986,6 +1100,10 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 	mutex_init(&tegra->lock);
 	tegra->dev = &pdev->dev;
 
+	err = tegra_xusb_init_context(tegra);
+	if (err < 0)
+		return err;
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	tegra->regs = devm_ioremap_resource(&pdev->dev, regs);
 	if (IS_ERR(tegra->regs))
@@ -1173,6 +1291,10 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 		goto put_powerdomains;
 	}
 
+	tegra->hcd->regs = tegra->regs;
+	tegra->hcd->rsrc_start = regs->start;
+	tegra->hcd->rsrc_len = resource_size(regs);
+
 	/*
 	 * This must happen after usb_create_hcd(), because usb_create_hcd()
 	 * will overwrite the drvdata of the device with the hcd it creates.
@@ -1185,19 +1307,6 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 		goto put_hcd;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	if (pm_runtime_enabled(&pdev->dev))
-		err = pm_runtime_get_sync(&pdev->dev);
-	else
-		err = tegra_xusb_runtime_resume(&pdev->dev);
-
-	if (err < 0) {
-		dev_err(&pdev->dev, "failed to enable device: %d\n", err);
-		goto disable_phy;
-	}
-
-	tegra_xusb_config(tegra, regs);
-
 	/*
 	 * The XUSB Falcon microcontroller can only address 40 bits, so set
 	 * the DMA mask accordingly.
@@ -1205,19 +1314,35 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 	err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40));
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err);
-		goto put_rpm;
+		goto disable_phy;
+	}
+
+	err = tegra_xusb_request_firmware(tegra);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to request firmware: %d\n", err);
+		goto disable_phy;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+
+	if (!pm_runtime_enabled(&pdev->dev))
+		err = tegra_xusb_runtime_resume(&pdev->dev);
+	else
+		err = pm_runtime_get_sync(&pdev->dev);
+
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable device: %d\n", err);
+		goto free_firmware;
 	}
 
+	tegra_xusb_config(tegra);
+
 	err = tegra_xusb_load_firmware(tegra);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to load firmware: %d\n", err);
 		goto put_rpm;
 	}
 
-	tegra->hcd->regs = tegra->regs;
-	tegra->hcd->rsrc_start = regs->start;
-	tegra->hcd->rsrc_len = resource_size(regs);
-
 	err = usb_add_hcd(tegra->hcd, tegra->xhci_irq, IRQF_SHARED);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to add USB HCD: %d\n", err);
@@ -1244,21 +1369,12 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 		goto put_usb3;
 	}
 
-	mutex_lock(&tegra->lock);
-
-	/* Enable firmware messages from controller. */
-	msg.cmd = MBOX_CMD_MSG_ENABLED;
-	msg.data = 0;
-
-	err = tegra_xusb_mbox_send(tegra, &msg);
+	err = tegra_xusb_enable_firmware_messages(tegra);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to enable messages: %d\n", err);
-		mutex_unlock(&tegra->lock);
 		goto remove_usb3;
 	}
 
-	mutex_unlock(&tegra->lock);
-
 	err = devm_request_threaded_irq(&pdev->dev, tegra->mbox_irq,
 					tegra_xusb_mbox_irq,
 					tegra_xusb_mbox_thread, 0,
@@ -1281,6 +1397,9 @@ put_rpm:
 		tegra_xusb_runtime_suspend(&pdev->dev);
 put_hcd:
 	usb_put_hcd(tegra->hcd);
+free_firmware:
+	dma_free_coherent(&pdev->dev, tegra->fw.size, tegra->fw.virt,
+			  tegra->fw.phys);
 disable_phy:
 	tegra_xusb_phy_disable(tegra);
 	pm_runtime_disable(&pdev->dev);
@@ -1328,22 +1447,176 @@ static int tegra_xusb_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static bool xhci_hub_ports_suspended(struct xhci_hub *hub)
+{
+	struct device *dev = hub->hcd->self.controller;
+	bool status = true;
+	unsigned int i;
+	u32 value;
+
+	for (i = 0; i < hub->num_ports; i++) {
+		value = readl(hub->ports[i]->addr);
+		if ((value & PORT_PE) == 0)
+			continue;
+
+		if ((value & PORT_PLS_MASK) != XDEV_U3) {
+			dev_info(dev, "%u-%u isn't suspended: %#010x\n",
+				 hub->hcd->self.busnum, i + 1, value);
+			status = false;
+		}
+	}
+
+	return status;
+}
+
+static int tegra_xusb_check_ports(struct tegra_xusb *tegra)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	unsigned long flags;
+	int err = 0;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (!xhci_hub_ports_suspended(&xhci->usb2_rhub) ||
+	    !xhci_hub_ports_suspended(&xhci->usb3_rhub))
+		err = -EBUSY;
+
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	return err;
+}
+
+static void tegra_xusb_save_context(struct tegra_xusb *tegra)
+{
+	const struct tegra_xusb_context_soc *soc = tegra->soc->context;
+	struct tegra_xusb_context *ctx = &tegra->context;
+	unsigned int i;
+
+	if (soc->ipfs.num_offsets > 0) {
+		for (i = 0; i < soc->ipfs.num_offsets; i++)
+			ctx->ipfs[i] = ipfs_readl(tegra, soc->ipfs.offsets[i]);
+	}
+
+	if (soc->fpci.num_offsets > 0) {
+		for (i = 0; i < soc->fpci.num_offsets; i++)
+			ctx->fpci[i] = fpci_readl(tegra, soc->fpci.offsets[i]);
+	}
+}
+
+static void tegra_xusb_restore_context(struct tegra_xusb *tegra)
+{
+	const struct tegra_xusb_context_soc *soc = tegra->soc->context;
+	struct tegra_xusb_context *ctx = &tegra->context;
+	unsigned int i;
+
+	if (soc->fpci.num_offsets > 0) {
+		for (i = 0; i < soc->fpci.num_offsets; i++)
+			fpci_writel(tegra, ctx->fpci[i], soc->fpci.offsets[i]);
+	}
+
+	if (soc->ipfs.num_offsets > 0) {
+		for (i = 0; i < soc->ipfs.num_offsets; i++)
+			ipfs_writel(tegra, ctx->ipfs[i], soc->ipfs.offsets[i]);
+	}
+}
+
+static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool wakeup)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	int err;
+
+	err = tegra_xusb_check_ports(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "not all ports suspended: %d\n", err);
+		return err;
+	}
+
+	err = xhci_suspend(xhci, wakeup);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err);
+		return err;
+	}
+
+	tegra_xusb_save_context(tegra);
+	tegra_xusb_phy_disable(tegra);
+	tegra_xusb_clk_disable(tegra);
+
+	return 0;
+}
+
+static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool wakeup)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	int err;
+
+	err = tegra_xusb_clk_enable(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to enable clocks: %d\n", err);
+		return err;
+	}
+
+	err = tegra_xusb_phy_enable(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to enable PHYs: %d\n", err);
+		goto disable_clk;
+	}
+
+	tegra_xusb_config(tegra);
+	tegra_xusb_restore_context(tegra);
+
+	err = tegra_xusb_load_firmware(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to load firmware: %d\n", err);
+		goto disable_phy;
+	}
+
+	err = __tegra_xusb_enable_firmware_messages(tegra);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to enable messages: %d\n", err);
+		goto disable_phy;
+	}
+
+	err = xhci_resume(xhci, true);
+	if (err < 0) {
+		dev_err(tegra->dev, "failed to resume XHCI: %d\n", err);
+		goto disable_phy;
+	}
+
+	return 0;
+
+disable_phy:
+	tegra_xusb_phy_disable(tegra);
+disable_clk:
+	tegra_xusb_clk_disable(tegra);
+	return err;
+}
+
 static int tegra_xusb_suspend(struct device *dev)
 {
 	struct tegra_xusb *tegra = dev_get_drvdata(dev);
-	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
 	bool wakeup = device_may_wakeup(dev);
+	int err;
+
+	synchronize_irq(tegra->mbox_irq);
 
-	/* TODO: Powergate controller across suspend/resume. */
-	return xhci_suspend(xhci, wakeup);
+	mutex_lock(&tegra->lock);
+	err = tegra_xusb_enter_elpg(tegra, wakeup);
+	mutex_unlock(&tegra->lock);
+
+	return err;
 }
 
 static int tegra_xusb_resume(struct device *dev)
 {
 	struct tegra_xusb *tegra = dev_get_drvdata(dev);
-	struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
+	bool wakeup = device_may_wakeup(dev);
+	int err;
 
-	return xhci_resume(xhci, 0);
+	mutex_lock(&tegra->lock);
+	err = tegra_xusb_exit_elpg(tegra, wakeup);
+	mutex_unlock(&tegra->lock);
+
+	return err;
 }
 #endif
 
@@ -1370,12 +1643,50 @@ static const struct tegra_xusb_phy_type tegra124_phy_types[] = {
 	{ .name = "hsic", .num = 2, },
 };
 
+static const unsigned int tegra124_xusb_context_ipfs[] = {
+	IPFS_XUSB_HOST_MSI_BAR_SZ_0,
+	IPFS_XUSB_HOST_MSI_BAR_SZ_0,
+	IPFS_XUSB_HOST_MSI_AXI_BAR_ST_0,
+	IPFS_XUSB_HOST_MSI_FPCI_BAR_ST_0,
+	IPFS_XUSB_HOST_MSI_VEC0_0,
+	IPFS_XUSB_HOST_MSI_EN_VEC0_0,
+	IPFS_XUSB_HOST_FPCI_ERROR_MASKS_0,
+	IPFS_XUSB_HOST_INTR_MASK_0,
+	IPFS_XUSB_HOST_INTR_ENABLE_0,
+	IPFS_XUSB_HOST_UFPCI_CONFIG_0,
+	IPFS_XUSB_HOST_CLKGATE_HYSTERESIS_0,
+	IPFS_XUSB_HOST_MCCIF_FIFOCTRL_0,
+};
+
+static const unsigned int tegra124_xusb_context_fpci[] = {
+	XUSB_CFG_ARU_CONTEXT_HS_PLS,
+	XUSB_CFG_ARU_CONTEXT_FS_PLS,
+	XUSB_CFG_ARU_CONTEXT_HSFS_SPEED,
+	XUSB_CFG_ARU_CONTEXT_HSFS_PP,
+	XUSB_CFG_ARU_CONTEXT,
+	XUSB_CFG_AXI_CFG,
+	XUSB_CFG_24,
+	XUSB_CFG_16,
+};
+
+static const struct tegra_xusb_context_soc tegra124_xusb_context = {
+	.ipfs = {
+		.num_offsets = ARRAY_SIZE(tegra124_xusb_context_ipfs),
+		.offsets = tegra124_xusb_context_ipfs,
+	},
+	.fpci = {
+		.num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci),
+		.offsets = tegra124_xusb_context_fpci,
+	},
+};
+
 static const struct tegra_xusb_soc tegra124_soc = {
 	.firmware = "nvidia/tegra124/xusb.bin",
 	.supply_names = tegra124_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra124_supply_names),
 	.phy_types = tegra124_phy_types,
 	.num_types = ARRAY_SIZE(tegra124_phy_types),
+	.context = &tegra124_xusb_context,
 	.ports = {
 		.usb2 = { .offset = 4, .count = 4, },
 		.hsic = { .offset = 6, .count = 2, },
@@ -1414,6 +1725,7 @@ static const struct tegra_xusb_soc tegra210_soc = {
 	.num_supplies = ARRAY_SIZE(tegra210_supply_names),
 	.phy_types = tegra210_phy_types,
 	.num_types = ARRAY_SIZE(tegra210_phy_types),
+	.context = &tegra124_xusb_context,
 	.ports = {
 		.usb2 = { .offset = 4, .count = 4, },
 		.hsic = { .offset = 8, .count = 1, },
@@ -1432,6 +1744,7 @@ MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
 
 static const char * const tegra186_supply_names[] = {
 };
+MODULE_FIRMWARE("nvidia/tegra186/xusb.bin");
 
 static const struct tegra_xusb_phy_type tegra186_phy_types[] = {
 	{ .name = "usb3", .num = 3, },
@@ -1439,12 +1752,20 @@ static const struct tegra_xusb_phy_type tegra186_phy_types[] = {
 	{ .name = "hsic", .num = 1, },
 };
 
+static const struct tegra_xusb_context_soc tegra186_xusb_context = {
+	.fpci = {
+		.num_offsets = ARRAY_SIZE(tegra124_xusb_context_fpci),
+		.offsets = tegra124_xusb_context_fpci,
+	},
+};
+
 static const struct tegra_xusb_soc tegra186_soc = {
 	.firmware = "nvidia/tegra186/xusb.bin",
 	.supply_names = tegra186_supply_names,
 	.num_supplies = ARRAY_SIZE(tegra186_supply_names),
 	.phy_types = tegra186_phy_types,
 	.num_types = ARRAY_SIZE(tegra186_phy_types),
+	.context = &tegra186_xusb_context,
 	.ports = {
 		.usb3 = { .offset = 0, .count = 3, },
 		.usb2 = { .offset = 3, .count = 3, },
@@ -1474,6 +1795,7 @@ static const struct tegra_xusb_soc tegra194_soc = {
 	.num_supplies = ARRAY_SIZE(tegra194_supply_names),
 	.phy_types = tegra194_phy_types,
 	.num_types = ARRAY_SIZE(tegra194_phy_types),
+	.context = &tegra186_xusb_context,
 	.ports = {
 		.usb3 = { .offset = 0, .count = 4, },
 		.usb2 = { .offset = 4, .count = 4, },