Merge 3.10-rc3 into usb-next

We want these fixes.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

23 files changed, 99 insertions, 118 deletions

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 605e2773aad4..77aeb0de98e1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -518,7 +518,7 @@ endif # USB_OHCI_HCD
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on PCI || SPARC_LEON || ARCH_VT8500
+	depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -535,26 +535,19 @@ config USB_UHCI_HCD
 
 config USB_UHCI_SUPPORT_NON_PCI_HC
 	bool
-	depends on USB_UHCI_HCD
-	default y if (SPARC_LEON || ARCH_VT8500)
+	default y if (SPARC_LEON || USB_UHCI_PLATFORM)
 
 config USB_UHCI_PLATFORM
-	bool "Generic UHCI Platform Driver support"
-	depends on USB_UHCI_SUPPORT_NON_PCI_HC
+	bool
 	default y if ARCH_VT8500
-	---help---
-	  Enable support for generic UHCI platform devices that require no
-	  additional configuration.
 
 config USB_UHCI_BIG_ENDIAN_MMIO
 	bool
-	depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
-	default y
+	default y if SPARC_LEON
 
 config USB_UHCI_BIG_ENDIAN_DESC
 	bool
-	depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
-	default y
+	default y if SPARC_LEON
 
 config USB_FHCI_HCD
 	tristate "Freescale QE USB Host Controller support"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 66420097c242..02f4611faa62 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev)
 
 /*-------------------------------------------------------------------------*/
 
-static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
-
 static int ehci_atmel_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &at91_ehci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 312fc10da3c7..246e124e6ac5 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL");
 #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
 #endif
 
-#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
-	!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \
-	!IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
-	!defined(PLATFORM_DRIVER) && \
-	!defined(PS3_SYSTEM_BUS_DRIVER) && \
-	!defined(OF_PLATFORM_DRIVER) && \
-	!defined(XILINX_OF_PLATFORM_DRIVER)
-#error "missing bus glue for ehci-hcd"
-#endif
-
 static int __init ehci_hcd_init(void)
 {
 	int retval = 0;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index d3582fdfb34c..bafa960ffd92 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
 	.extra_priv_size = sizeof(struct omap_hcd),
 };
 
-static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
-
 /**
  * ehci_hcd_omap_probe - initialize TI-based HCDs
  *
@@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
 	 * Since shared usb code relies on it, set it here for now.
 	 * Once we have dma capability bindings this can go away.
 	 */
-	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &omap_ehci_dma_mask;
+	if (!dev->dma_mask)
+		dev->dma_mask = &dev->coherent_dma_mask;
+	if (!dev->coherent_dma_mask)
+		dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
 			dev_name(dev));
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 29cc4a3a07a3..1a450aa13ebf 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
 	}
 }
 
-static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
-
 static int ehci_orion_drv_probe(struct platform_device *pdev)
 {
 	struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	 * now. Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &ehci_orion_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	if (!request_mem_region(res->start, resource_size(res),
 				ehci_orion_hc_driver.description)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 635775278c7f..379037f51a2f 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev)
 		dev_err(dev, "can't request ehci vbus gpio %d", gpio);
 }
 
-static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
-
 static int s5p_ehci_probe(struct platform_device *pdev)
 {
 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
@@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
 	 * Once we move to full device tree support this will vanish off.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &ehci_s5p_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
@@ -107,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
 	if (IS_ERR(phy)) {
 		/* Fallback to pdata */
 		if (!pdata) {
+			usb_put_hcd(hcd);
 			dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
 			return -EPROBE_DEFER;
 		} else {
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 7c0a3566b0fe..f5ac4e202bb6 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
 		ehci_spear_drv_resume);
 
-static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
-
 static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd ;
@@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &spear_ehci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	usbh_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e3eddc31ac83..59d111bf44a9 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
 	writel(val, base + TEGRA_USB_PORTSC1);
 }
 
-static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
-
 static int tegra_ehci_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	setup_vbus_gpio(pdev, pdata);
 
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 125e261f5bfc..2facee53eab1 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
 	int retval = 1;
 	unsigned long flags;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
+	/* if !PM_RUNTIME, root hub timers won't get shut down ... */
 	if (!HC_IS_RUNNING(hcd->state))
 		return 0;
 
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index bbb791bd7617..a13709ee4e5d 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev)
 	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq_res) {
 		pr_warning("isp1760: IRQ resource not available\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto cleanup;
 	}
+
 	irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
 
 	if (priv) {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a0cb44f0e724..2ee1496dbc1d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = {
 
 MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
 
-static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
-
 static int ohci_at91_of_init(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &at91_ohci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 07592c00af26..b0b542c14e31 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = {
 	.start_port_reset	= ohci_start_port_reset,
 };
 
-static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
-
 static int exynos_ohci_probe(struct platform_device *pdev)
 {
 	struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
@@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
 	 * Once we move to full device tree support this will vanish off.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &ohci_exynos_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
 	if (!pdev->dev.coherent_dma_mask)
 		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9e6de9586ae4..fc627fd54116 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -233,14 +233,14 @@ static int ohci_urb_enqueue (
 			urb->start_frame = frame;
 		}
 	} else if (ed->type == PIPE_ISOCHRONOUS) {
-		u16	next = ohci_frame_no(ohci) + 2;
+		u16	next = ohci_frame_no(ohci) + 1;
 		u16	frame = ed->last_iso + ed->interval;
 
 		/* Behind the scheduling threshold? */
 		if (unlikely(tick_before(frame, next))) {
 
 			/* USB_ISO_ASAP: Round up to the first available slot */
-			if (urb->transfer_flags & URB_ISO_ASAP)
+			if (urb->transfer_flags & URB_ISO_ASAP) {
 				frame += (next - frame + ed->interval - 1) &
 						-ed->interval;
 
@@ -248,21 +248,25 @@ static int ohci_urb_enqueue (
 			 * Not ASAP: Use the next slot in the stream.  If
 			 * the entire URB falls before the threshold, fail.
 			 */
-			else if (tick_before(frame + ed->interval *
+			} else {
+				if (tick_before(frame + ed->interval *
 					(urb->number_of_packets - 1), next)) {
-				retval = -EXDEV;
-				usb_hcd_unlink_urb_from_ep(hcd, urb);
-				goto fail;
-			}
+					retval = -EXDEV;
+					usb_hcd_unlink_urb_from_ep(hcd, urb);
+					goto fail;
+				}
 
-			/*
-			 * Some OHCI hardware doesn't handle late TDs
-			 * correctly.  After retiring them it proceeds to
-			 * the next ED instead of the next TD.  Therefore
-			 * we have to omit the late TDs entirely.
-			 */
-			urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
-					ed->interval);
+				/*
+				 * Some OHCI hardware doesn't handle late TDs
+				 * correctly.  After retiring them it proceeds
+				 * to the next ED instead of the next TD.
+				 * Therefore we have to omit the late TDs
+				 * entirely.
+				 */
+				urb_priv->td_cnt = DIV_ROUND_UP(
+						(u16) (next - frame),
+						ed->interval);
+			}
 		}
 		urb->start_frame = frame;
 	}
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 86d04ed24b72..281ba57a11e2 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 
 	isp1301_i2c_client = isp1301_get_client(isp1301_node);
 	if (!isp1301_i2c_client) {
-		ret = -EPROBE_DEFER;
-		goto out;
+		return -EPROBE_DEFER;
 	}
 
 	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	if (usb_disabled()) {
 		dev_err(&pdev->dev, "USB is disabled\n");
 		ret = -ENODEV;
-		goto out;
+		goto fail_disable;
 	}
 
 	/* Enable AHB slave USB clock, needed for further USB clock control */
@@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	if (IS_ERR(usb_pll_clk)) {
 		dev_err(&pdev->dev, "failed to acquire USB PLL\n");
 		ret = PTR_ERR(usb_pll_clk);
-		goto out1;
+		goto fail_pll;
 	}
 
 	ret = clk_enable(usb_pll_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to start USB PLL\n");
-		goto out2;
+		goto fail_pllen;
 	}
 
 	ret = clk_set_rate(usb_pll_clk, 48000);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to set USB clock rate\n");
-		goto out3;
+		goto fail_rate;
 	}
 
 	/* Enable USB device clock */
@@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	if (IS_ERR(usb_dev_clk)) {
 		dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 		ret = PTR_ERR(usb_dev_clk);
-		goto out4;
+		goto fail_dev;
 	}
 
 	ret = clk_enable(usb_dev_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
-		goto out5;
+		goto fail_deven;
 	}
 
 	/* Enable USB otg clocks */
@@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	if (IS_ERR(usb_otg_clk)) {
 		dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 		ret = PTR_ERR(usb_otg_clk);
-		goto out6;
+		goto fail_otg;
 	}
 
 	__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
@@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	ret = clk_enable(usb_otg_clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
-		goto out7;
+		goto fail_otgen;
 	}
 
 	isp1301_configure();
@@ -296,14 +295,14 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	if (!hcd) {
 		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 		ret = -ENOMEM;
-		goto out8;
+		goto fail_hcd;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(hcd->regs)) {
 		ret = PTR_ERR(hcd->regs);
-		goto out8;
+		goto fail_resource;
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
@@ -311,7 +310,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = -ENXIO;
-		goto out8;
+		goto fail_resource;
 	}
 
 	nxp_start_hc();
@@ -325,23 +324,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
 		return ret;
 
 	nxp_stop_hc();
-out8:
+fail_resource:
 	usb_put_hcd(hcd);
-out7:
+fail_hcd:
 	clk_disable(usb_otg_clk);
-out6:
+fail_otgen:
 	clk_put(usb_otg_clk);
-out5:
+fail_otg:
 	clk_disable(usb_dev_clk);
-out4:
+fail_deven:
 	clk_put(usb_dev_clk);
-out3:
+fail_dev:
+fail_rate:
 	clk_disable(usb_pll_clk);
-out2:
+fail_pllen:
 	clk_put(usb_pll_clk);
-out1:
+fail_pll:
+fail_disable:
 	isp1301_i2c_client = NULL;
-out:
 	return ret;
 }
 
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 08e811d438f3..8f713571a0b7 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
-
 /*
  * configure so an HC device and id are always provided
  * always called with process context; sleeping is OK
@@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
 	 * Since shared usb code relies on it, set it here for now.
 	 * Once we have dma capability bindings this can go away.
 	 */
-	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &omap_ohci_dma_mask;
+	if (!dev->dma_mask)
+		dev->dma_mask = &dev->coherent_dma_mask;
+	if (!dev->coherent_dma_mask)
+		dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
 			dev_name(dev));
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 4e0f088b6d2b..3a9c01d8b79c 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = {
 
 MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
 
-static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
-
 static int ohci_pxa_of_init(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &pxa_ohci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 6a7cb1407326..cc9dd9e4f05e 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = {
 	.start_port_reset	= ohci_start_port_reset,
 };
 
-static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
-
 static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 {
 	const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &spear_ohci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	usbh_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index c9d114965123..4a6df2d8f902 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
 	int ports, i, retval = 1;
 	unsigned long flags;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
+	/* if !PM_RUNTIME, root hub timers won't get shut down ... */
 	if (!HC_IS_RUNNING(hcd->state))
 		return 0;
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ad4483efb6d6..b2ec7fe758dd 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
  * and usb-storage.
  *
  * TODO:
- * - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
+ * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
  * - various issues noted in the code
  * - performance work; use both register banks; ...
  * - use urb->iso_frame_desc[] with ISO transfers
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f87bee6d2789..9189bc984c98 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 		/* auto-stop if nothing connected for 1 second */
 		if (any_ports_active(uhci))
 			uhci->rh_state = UHCI_RH_RUNNING;
-		else if (time_after_eq(jiffies, uhci->auto_stop_time))
+		else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+				!uhci->wait_for_hp)
 			suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
 		break;
 
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 5382f3a8670d..e11b70ae5f6f 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = {
 	.hub_control =		uhci_hub_control,
 };
 
-static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
-
 static int uhci_hcd_platform_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
@@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
 	 * Once we have dma capability bindings this can go away.
 	 */
 	if (!pdev->dev.dma_mask)
-		pdev->dev.dma_mask = &platform_uhci_dma_mask;
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
 			pdev->name);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f0976d8190bc..041c6ddb695c 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
 		return -EINVAL;		/* Can't change the period */
 
 	} else {
-		next = uhci->frame_number + 2;
+		next = uhci->frame_number + 1;
 
 		/* Find the next unused frame */
 		if (list_empty(&qh->queue)) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 965b539bc474..2cfc465925bd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
 
 	/* Set the max packet size and max burst */
+	max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+	max_burst = 0;
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		max_packet = usb_endpoint_maxp(&ep->desc);
-		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
-		max_packet = ep->ss_ep_comp.bMaxBurst;
-		ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
+		max_burst = ep->ss_ep_comp.bMaxBurst;
 		break;
 	case USB_SPEED_HIGH:
+		/* Some devices get this wrong */
+		if (usb_endpoint_xfer_bulk(&ep->desc))
+			max_packet = 512;
 		/* bits 11:12 specify the number of additional transaction
 		 * opportunities per microframe (USB 2.0, section 9.6.6)
 		 */
@@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 				usb_endpoint_xfer_int(&ep->desc)) {
 			max_burst = (usb_endpoint_maxp(&ep->desc)
 				     & 0x1800) >> 11;
-			ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
 		}
-		/* Fall through */
+		break;
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
-		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		break;
 	default:
 		BUG();
 	}
+	ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
+			MAX_BURST(max_burst));
 	max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
 	ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));