summaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea
diff options
context:
space:
mode:
authorPeter Chen <peter.chen@freescale.com>2014-11-26 13:44:28 +0800
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-11-26 09:28:12 -0800
commitb82613cf09455d9a50fbb144ef07b68225f2b452 (patch)
tree2b6a1d400d3bbf93244bf85d503fd66c303ae4da /drivers/usb/chipidea
parent6d037db6409c33738c7153e87ae1cf682ca2851b (diff)
usb: chipidea: add hw_wait_phy_stable for getting stable status
The phy needs some delay to output the stable status from low power mode. And for OTGSC, the status inputs are debounced using a 1 ms time constant, so, delay 2ms for controller to get the stable status(like vbus and id) when the phy leaves low power. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/chipidea')
-rw-r--r--drivers/usb/chipidea/core.c24
1 files changed, 16 insertions, 8 deletions
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index d87caea261d9..fe3880541efd 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -190,6 +190,17 @@ u8 hw_port_test_get(struct ci_hdrc *ci)
return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
}
+static void hw_wait_phy_stable(void)
+{
+ /*
+ * The phy needs some delay to output the stable status from low
+ * power mode. And for OTGSC, the status inputs are debounced
+ * using a 1 ms time constant, so, delay 2ms for controller to get
+ * the stable status, like vbus and id when the phy leaves low power.
+ */
+ usleep_range(2000, 2500);
+}
+
/* The PHY enters/leaves low power mode */
static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
{
@@ -351,7 +362,9 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
case USBPHY_INTERFACE_MODE_UTMIW:
case USBPHY_INTERFACE_MODE_HSIC:
ret = _ci_usb_phy_init(ci);
- if (ret)
+ if (!ret)
+ hw_wait_phy_stable();
+ else
return ret;
hw_phymode_configure(ci);
break;
@@ -364,6 +377,8 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
break;
default:
ret = _ci_usb_phy_init(ci);
+ if (!ret)
+ hw_wait_phy_stable();
}
return ret;
@@ -667,13 +682,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "unable to init phy: %d\n", ret);
return ret;
- } else {
- /*
- * The delay to sync PHY's status, the maximum delay is
- * 2ms since the otgsc uses 1ms timer to debounce the
- * PHY's input
- */
- usleep_range(2000, 2500);
}
ci->hw_bank.phys = res->start;